Sata controller Sil 3512 - Kernel Panic.

[Peter Ankerstål]

Hi,

I've recently installed a new sata-controller on a fresh installed FreeBSD 6.2.
I gave the manual ata(4) a quick look before I bought the controller and it 
tells me this chip should be supported. But the machine panics every few minutes 
when I have a disk connected to it.

Is there a way to fix this? heh.

kernel: atapci0: <SiI 3512 SATA150 controller> port 
0xdff0-0xdff7,0xdfe4-0xdfe7,0xdfa8-0xdfaf,0xdfe0-0xdfe3,0xdf90-0xdf9f mem 
0xfe5ffc00-0xfe5ffdff irq 22 at device 11.0 on pci1

kernel: ad6: TIMEOUT - WRITE_DMA retrying (1 retry left) LBA=244892063

fee kernel:

fee kernel:

kernel: Fatal trap 12: page fault while in kernel mode

kernel: fault virtual address       = 0x28

kernel: fault code          = supervisor read, page not present

kernel: instruction pointer = 0x20:0xc0685de4

kernel: stack pointer               = 0x28:0xcbeeac28

kernel: frame pointer               = 0x28:0xcbeeac30

kernel: code segment                = base 0x0, limit 0xfffff, type 0x1b

kernel: = DPL 0, pres 1, def32 1, gran 1

kernel: processor eflags    = interrupt enabled, resume, IOPL = 0

kernel: current process             = 6 (thread taskq)
kernel: trap number         = 12

kernel: panic: page fault

kernel: Uptime: 33m38s

kernel: Cannot dump. No dump device defined.

kernel: Automatic reboot in 15 seconds - press a key on the console to abort

kernel: Rebooting...