ath0 issue

[JoaoBR]

On Sunday 12 November 2006 17:32, Lamont Granquist wrote:
> i saw the same behavior where tx packets would tend to
> spool up and buffer.  here's the output of one second
> where a bunch of spooled up packets were sent alont with
> the previous second and following second and with a note
> on how long it had been before any ath*tx* routine had
> been called.  hopefully this is useful for debugging --
> i've got copious amounts of debugging logs, so let me
> know if i've guessed wrongly about what is relevant...


yes and when you then look at athstats you probably see the 
tx buffer is filled up until the interface stops 
transmitting sooner or later

It seems to me that the tx buffer never becomes empty 
anymore when the interface raised once "tx stopped because 
out of txbuffer" until it then completly stops tx, if you 
are present when it happens you can get it back with 
ifconfig down/up but when you are late you need to reset it 
or reboot. It does not matter how high you set the 
ath.txbuf

it seems the problem comes up later when setting higher 
values for dev.ath.0.acktimeout and dev.ath.0.ctstimeout 
but I am still testing

-- 

João







A mensagem foi scaneada pelo sistema de e-mail e pode ser considerada segura.
Service fornecido pelo Datacenter Matik  https://datacenter.matik.com.br