CFT: new ath hal (take 2)

[JoaoBR]

On Saturday 06 May 2006 21:17, Sam Leffler wrote:
> A new test snapshot is available at:
>
> http://people.freebsd.org/~sam/ath_hal-20060506.tgz
>
> This is 0.9.17.0 and is known to work on sparc (tested) and may well
> work on alpha (untested but likely the same issue that broke sparc).
>
> This code should be a drop-in replacement for what's in cvs in HEAD but
> be sure to rebuild both the driver and rate control module as there are
> ABI changes.  Note that to use this hal with RELENG_6 or other branches
> other than HEAD you must have rev 1.143 of if_ath.c.  To build a sparc
> module you must have rev 1.5 of modules/ath_hal/Makefile and rev 1.539
> of conf/options.
>

I attached a patch for if_ath.c on releng_6 
with it the hal should compile on i386 and amd64 fine

but at the end for my card, the DWL-AG530, nothing changed


ath_hal: 0.9.17.0 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
ath0: <Atheros 5212> mem 0xfae00000-0xfae0ffff irq 16 at device 11.0 on pci0
ath0: Ethernet address: 00:11:95:c2:2a:80
ath0: mac 5.9 phy 4.3 radio 3.6


setting to regdomain 16

Channel   1 : 2412  Mhz 11g          Channel  48 : 5240  Mhz 11a
Channel   2 : 2417  Mhz 11g          Channel  50 : 5250  Mhz 11a Turbo
Channel   3 : 2422  Mhz 11g          Channel  52 : 5260  Mhz 11a
Channel   4 : 2427  Mhz 11g          Channel  56 : 5280  Mhz 11a
Channel   5 : 2432  Mhz 11g          Channel  58 : 5290  Mhz 11a Turbo
Channel   6 : 2437  Mhz 11g          Channel  60 : 5300  Mhz 11a
Channel   7 : 2442  Mhz 11g          Channel  64 : 5320  Mhz 11a
Channel   8 : 2447  Mhz 11g          Channel 149 : 5745  Mhz 11a
Channel   9 : 2452  Mhz 11g          Channel 152 : 5760  Mhz 11a Turbo
Channel  10 : 2457  Mhz 11g          Channel 153 : 5765  Mhz 11a
Channel  11 : 2462  Mhz 11g          Channel 157 : 5785  Mhz 11a
Channel  36 : 5180  Mhz 11a          Channel 160 : 5800  Mhz 11a Turbo
Channel  40 : 5200  Mhz 11a          Channel 161 : 5805  Mhz 11a
Channel  42 : 5210  Mhz 11a Turbo    Channel 165 : 5825  Mhz 11a
Channel  44 : 5220  Mhz 11a


setting regdomain 18

Channel   1 : 2412  Mhz 11g          Channel 136 : 4942* Mhz 11a
Channel   2 : 2417  Mhz 11g          Channel 136 : 4945* Mhz 11a
Channel   3 : 2422  Mhz 11g          Channel 136 : 4950* Mhz 11a
Channel   4 : 2427  Mhz 11g          Channel 137 : 4955* Mhz 11a
Channel   5 : 2432  Mhz 11g          Channel 137 : 4960* Mhz 11a
Channel   6 : 2437  Mhz 11g          Channel 137 : 4965* Mhz 11a
Channel   7 : 2442  Mhz 11g          Channel 137 : 4970* Mhz 11a
Channel   8 : 2447  Mhz 11g          Channel 138 : 4975* Mhz 11a
Channel   9 : 2452  Mhz 11g          Channel 138 : 4980* Mhz 11a
Channel  10 : 2457  Mhz 11g          Channel 138 : 4985* Mhz 11a
Channel  11 : 2462  Mhz 11g



João

-------------- next part --------------
A non-text attachment was scrubbed...
Name: if_ath.patch
Type: text/x-diff
Size: 6408 bytes
Desc: not available
Url : http://lists.freebsd.org/pipermail/freebsd-stable/attachments/20060508/057ba8b1/if_ath.bin