console on sioN (not 0), RELENG_6

[Dmitriy Kirhlarov]

On Thu, Apr 27, 2006 at 08:16:42PM +0400, Dmitry Morozovsky wrote:
> Colleagues,
> 
> what should I do to drift serial console from sio0 to sio4 on puc (alas, com1 
> is broken on given motherboard, and there is no com2)? Quick googling and 
> looking through the Handbook does not help much.

look like impossible.

handbook.
22.6.5.2 Using Serial Port Other Than sio0 for the Console

Edit /etc/make.conf and set BOOT_COMCONSOLE_PORT to the address of the
port you want to use (0x3F8, 0x2F8, 0x3E8 or 0x2E8). Only sio0 through
sio3 (COM1 through COM4) can be used; multiport serial cards will not
work. No interrupt setting is needed.

WBR
-- 
Dmitriy Kirhlarov
OILspace, 26 Leninskaya sloboda, bld. 2, 2nd floor, 115280 Moscow, Russia
P:+7 495 105 7247 ext.203 F:+7 495 105 7246 E:DmitriyKirhlarov at oilspace.com
OILspace - The resource enriched - www.oilspace.com