wpa_supplicant and wi

[Isaac Waldron]

I am using a Netgear MA401 with the wi driver, and am having trouble
using wpa_supplicant to set static WEP keys.  I have the wlan_wep.ko
module loaded with wlan and wi built into the kernel.  My
wpa_supplicant.conf looks like this:

ctrl_interface=/var/run/wpa_supplicant
ctrl_interface_group=wheel

network={
	ssid="INTERNERD"
	scan_ssid=1
	priority=1
	key_mgmt=NONE
	wep_key0=75745E266D4247372840217E73
	wep_tx_keyidx=0
}

and wpa_supplicant -i wi0 -c /etc/wpa_supplicant.conf -d -d returns
the following:

Initializing interface 'wi0' conf '/etc/wpa_supplicant.conf' driver
'default' ctrl_interface 'N/A'
Configuration file '/etc/wpa_supplicant.conf' -> '/etc/wpa_supplicant.conf'
Reading configuration file '/etc/wpa_supplicant.conf'
ctrl_interface='/var/run/wpa_supplicant'
ctrl_interface_group=0 (from group name 'wheel')
Line: 4 - start of a new network block
ssid - hexdump_ascii(len=9):
     49 4e 54 45 52 4e 45 52 44                        INTERNERD
scan_ssid=1 (0x1)
priority=1 (0x1)
key_mgmt: 0x4
wep_key0 - hexdump(len=13): 75 74 5e 26 6d 42 47 37 28 40 21 7e 73
wep_tx_keyidx=0 (0x0)
Priority group 1
   id=0 ssid='INTERNERD'
Initializing interface (2) 'wi0'
EAPOL: SUPP_PAE entering state DISCONNECTED
EAPOL: KEY_RX entering state NO_KEY_RECEIVE
EAPOL: SUPP_BE entering state INITIALIZE
EAP: EAP entering state DISABLED
EAPOL: External notification - portEnabled=0
EAPOL: External notification - portValid=0
Own MAC address: 00:09:5b:29:81:67
wpa_driver_bsd_set_wpa: enabled=1
wpa_driver_bsd_set_wpa_internal: wpa=3 privacy=1
wpa_driver_bsd_del_key: keyidx=0
wpa_driver_bsd_del_key: keyidx=1
wpa_driver_bsd_del_key: keyidx=2
wpa_driver_bsd_del_key: keyidx=3
wpa_driver_bsd_set_countermeasures: enabled=0
wpa_driver_bsd_set_drop_unencrypted: enabled=1
Setting scan request: 0 sec 100000 usec
Added interface wi0
State: DISCONNECTED -> SCANNING
Starting AP scan (specific SSID)
Scan SSID - hexdump_ascii(len=9):
     49 4e 54 45 52 4e 45 52 44                        INTERNERD
State: SCANNING -> ASSOCIATED
Associated to a new BSS: BSSID=00:14:bf:00:2e:d4
No keys have been configured - skip key clearing
Network configuration found for the current AP
WPA: clearing AP WPA IE
WPA: clearing AP RSN IE
WPA: clearing own WPA/RSN IE
EAPOL: External notification - portControl=ForceAuthorized
Associated with 00:14:bf:00:2e:d4
WPA: Association event - clear replay counter
EAPOL: External notification - portEnabled=0
EAPOL: External notification - portValid=0
EAPOL: External notification - portEnabled=1
EAPOL: SUPP_PAE entering state S_FORCE_AUTH
EAPOL: SUPP_BE entering state IDLE
Cancelling authentication timeout
State: ASSOCIATED -> COMPLETED

No keys are set on the wi0 interface apparently, as ifconfig reports
deftxkey UNDEF and no  configured keys.  In other outputs from
wpa_supplicant that I've seen, there are lines beginning with
wpa_driver_bsd_key_set that appear to be key setting.

Does anyone have this working with a MA401 that could help me out?

Thanks,
Isaac Waldron
--
Isaac Waldron
isaac.waldron at gmail.com
mobile: 1-508-353-3453
aim: n1yzi