device em0 not showing up at boot

[Forrest Aldrich]

Jack Vogel wrote:
> On 11/29/05, *Mike Tancsa* <mike at sentex.net <mailto:mike at sentex.net>> 
> wrote:
>
>     At 09:29 AM 29/11/2005, Lowell Gilbert wrote:
>     >Forrest Aldrich <forrie at forrie.com <mailto:forrie at forrie.com>>
>     writes:
>     >
>     > > I have an older PC (Compaq AP200) that I'm running FreeBSD-6.0 on.
>     > >
>     > > I have an Intel Gigabit interface installed in one of the PCI
>     slots,
>     > > along with another dual 10/100 Intel in another.
>     > >
>     > > The "em0" device does not show up at boot time, and therefore the
>     > > firewall rules fail.
>     >
>     >It's not detected in the boot messages at all?
>
>     What does
>     pciconf -lv show ?
>
>              ---Mike
>
>
> There are some adapters that are not in the driver. I am the person within
> Intel LAD responsible for FreeBSD, we are going to try and update PCI IDs
> for new devices shortly. If you can report what Mike asked we can see what
> the device is and I might have a patch I can put together.
>
> Cheers,
>
> Jack
>
Hi Jack, Mike,

Thank you for your responses.  Sorry it took me a day to get to this.

Here is the output per the above command.

Thanks again,
Forrest


agp0 at pci0:0:0:  class=0x060000 card=0x00000000 chip=0x71908086 rev=0x03 
hdr=0x00
    vendor   = 'Intel Corporation'
    device   = '82443BX/ZX 440BX/ZX CPU to PCI Bridge (AGP Implemented)'
    class    = bridge
    subclass = HOST-PCI
pcib1 at pci0:1:0: class=0x060400 card=0x00000000 chip=0x71918086 rev=0x03 
hdr=0x01
    vendor   = 'Intel Corporation'
    device   = '82443BX/ZX 440BX/ZX AGPset PCI-to-PCI bridge'
    class    = bridge
    subclass = PCI-PCI
em0 at pci0:13:0:  class=0x020000 card=0x11768086 chip=0x10768086 rev=0x00 
hdr=0x00
    vendor   = 'Intel Corporation'
    device   = '82547EI Gigabit Ethernet Controller'
    class    = network
    subclass = ethernet
pcib2 at pci0:14:0:        class=0x060400 card=0x000000dc chip=0x00241011 
rev=0x03 hdr=0x01
    vendor   = 'Digital Equipment Corporation'
    device   = '21151/2 PCI to PCI Bridge'
    class    = bridge
    subclass = PCI-PCI
none0 at pci0:16:0:        class=0x030000 card=0x08003d3d chip=0x000a3d3d 
rev=0x01 hdr=0x00
    vendor   = '3Dlabs, Inc. Ltd'
    device   = 'Permedia 3'
    class    = display
    subclass = VGA
isab0 at pci0:20:0:        class=0x060100 card=0x00000000 chip=0x71108086 
rev=0x02 hdr=0x00
    vendor   = 'Intel Corporation'
    device   = '82371AB/EB/MB PIIX4/4E/4M ISA Bridge'
    class    = bridge
    subclass = PCI-ISA
atapci0 at pci0:20:1:      class=0x010180 card=0x00000000 chip=0x71118086 
rev=0x01 hdr=0x00
    vendor   = 'Intel Corporation'
    device   = '82371AB/EB/MB PIIX4/4E/4M IDE Controller'
    class    = mass storage
    subclass = ATA
uhci0 at pci0:20:2:        class=0x0c0300 card=0x00000000 chip=0x71128086 
rev=0x01 hdr=0x00
    vendor   = 'Intel Corporation'
    device   = '82371AB/EB/MB PIIX4/4E/4M USB Interface'
    class    = serial bus
    subclass = USB
piix0 at pci0:20:3:        class=0x068000 card=0x00000000 chip=0x71138086 
rev=0x02 hdr=0x00
    vendor   = 'Intel Corporation'
    device   = '82371AB/EB/MB PIIX4/4E/4M Power Management Controller'
    class    = bridge
fxp0 at pci2:4:0:  class=0x020000 card=0x10f08086 chip=0x12298086 rev=0x05 
hdr=0x00
    vendor   = 'Intel Corporation'
    device   = '82550/1/7/8/9 EtherExpress PRO/100(B) Ethernet Adapter'
    class    = network
    subclass = ethernet
fxp1 at pci2:5:0:  class=0x020000 card=0x10f08086 chip=0x12298086 rev=0x05 
hdr=0x00
    vendor   = 'Intel Corporation'
    device   = '82550/1/7/8/9 EtherExpress PRO/100(B) Ethernet Adapter'
    class    = network
    subclass = ethernet