(i386/88610) Problem with booting FreeBSD 6.0 bootonly.iso - 5.4
works fine
Mitch (Bitblock)
mitch at bitblock.com
Sat Nov 12 00:12:23 PST 2005
SORRY FOR THE REPOST - ORIGINAL WAS HTML - STOPPED BY MODERATOR - THANKS
Something changed between versions – at first I thought the problem had
something to with the lan card – or maybe compatibility between the lan card
and the host system – but now I have a second lan card that produces the
same problem – but ONLY with FreeBSD 6.0 release.
I’m hoping stable is the right list? If it’s supposed to be current, sorry –
first time posting a problem like this
The first 4 lans are on the motherboard.
The Fault 12 occurs just after starting to detect the 6th lan interface
Here’s the 5th lan (first on this PCI card
re0: Reserved 0x100 bytes for rid 0x10 type 4 at 0xc000
pcib2: rl4 requested I/O range 0xc000-0xc0ff: in range
pcib2: rl4 requested I/O range 0xc000-0xc0ff: in range
rl4: <RealTek 8139 10/100BaseTX> port 0xc000-0xc0ff mem
0xee013000-0xee0130ff irq 11 at device 8.0 on pci4
pcib2: rl4 requested I/O range 0xc000-0xc0ff: in range
miibus4: <MII bus> on rl4
rlphy4: <RealTek internal media interface> on miibus4
rlphy4: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl4: bpf attached
rl4: Ethernet address: 00:30:18:49:3f:44
rl4: [MPSAFE]
And here’s the start of the 6th
re0: Reserved 0x100 bytes for rid 0x10 type 4 at 0xc100
pcib2: rl5 requested I/O range 0xc100-0xc1ff: in range
pcib2: rl5 requested I/O range 0xc100-0xc1ff: in range
rl5: <RealTek 8139 10/100BaseTX> port 0xc100-0xc1ff mem
0xee010000-0xee0100ff irq 7 at device 9.0 on pci4
pcib2: rl5 requested I/O range 0xc100-0xc1ff: in range
Fatal trap 12: page fault while in kernel mode
fault virtual address = 0x10
fault code = supervisor read, page not present
instruction pointer = 0x20:0xc069c394
stack pointer = 0x28:0xc1020938
frame pointer = 0x28:0xc1020938
code segment = base 0x0, limit 0xfffff, type 0x1b
= DPL 0, pres 1, def32 1, gran 1
processor eflags = interrupt enabled, resume, IOPL = 0
current process = 0 (swapper)
trap number = 12
panic: page fault
Uptime: 1s
The problem occurs in the same place with a different type of 4 port lan
card, however the problem does not occur in a system with only one LAN on
the motherboard (with version 6.0 or 5.4)
So below I have attached boot messages from a 6.0 bootonly.iso (I tried to
capture messages from a bootonly 5.4, but using “boot –h” or “boot –h –v”
stops after loading acpi – presumably when it starts using the serial port –
and yet in 6.0 – this is fine ;-)
Any help greatly appreciated – I’ll do whatever testing and provide whatever
other information is required – thanks in advance!
m/
FreeBSD 6.0 release bootonly console dump:
SMAP type=01 base=0000000000000000 len=000000000009fc00
SMAP type=02 base=00000000000f0000 len=0000000000010000
SMAP type=02 base=00000000ffff0000 len=0000000000010000
SMAP type=03 base=000000001eff3000 len=000000000000d000
SMAP type=04 base=000000001eff0000 len=0000000000003000
SMAP type=02 base=000000000009fc00 len=0000000000000400
SMAP type=01 base=0000000000100000 len=000000001eef0000
Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights
reserved.
FreeBSD 6.0-RELEASE #0: Fri Nov 4 01:40:13 UTC 2005
sullrich at builder.livebsd.com:/usr/obj/usr/src/sys/pfSense.6
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0b0a000.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0b0a158.
Calibrating clock(s) ... i8254 clock: 1193212 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 1002277897 Hz
CPU: VIA C3 Nehemiah+RNG+ACE (1002.28-MHz 686-class CPU)
Origin = "CentaurHauls" Id = 0x698 Stepping = 8
Features=0x381b83f<FPU,VME,DE,PSE,TSC,MSR,SEP,MTRR,PGE,CMOV,PAT,MMX,FXSR,SSE
>
real memory = 520028160 (495 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages)
0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
0x0000000000c28000 - 0x000000001e6fffff, 497909760 bytes (121560 pages)
avail memory = 499310592 (476 MB)
bios32: Found BIOS32 Service Directory header at 0xc00faf30
bios32: Entry = 0xfb3b0 (c00fb3b0) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xf0000+0xb400
pnpbios: Found PnP BIOS data at 0xc00fbec0
pnpbios: Entry = f0000:bef0 Rev = 1.0
Other BIOS signatures found:
crypto: <crypto core>
ath_rate: version 1.2 <SampleRate bit-rate selection algorithm>
wlan: <802.11 MAC ACL support>
wlan: mac acl policy registered
wlan: <802.11 Link Layer>
mem: <memory>
nfslock: pseudo-device
null: <null device, zero device>
io: <I/O>
random: <entropy source, Hardware, VIA Nehemiah>
ath_hal: 0.9.16.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413,
DFS)
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <CLE266 AWRDACPI> on motherboard
acpi0: [MPSAFE]
pci_open(1): mode 1 addr port (0x0cf8) is 0x80000060
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=31231106)
pcibios: BIOS version 2.10
Found $PIR table, 12 entries at 0xc00fdea0
PCI-Only Interrupts: 5 7 10 11
Location Bus Device Pin Link IRQs
slot 1 0 8 A 0x01 3 4 5 6 7 9 10 11 12 14 15
slot 1 0 8 B 0x02 3 4 5 6 7 9 10 11 12 14 15
slot 1 0 8 C 0x03 3 4 5 6 7 9 10 11 12 14 15
slot 1 0 8 D 0x05 3 4 5 6 7 9 10 11 12 14 15
slot 2 0 9 A 0x02 3 4 5 6 7 9 10 11 12 14 15
slot 2 0 9 B 0x03 3 4 5 6 7 9 10 11 12 14 15
slot 2 0 9 C 0x05 3 4 5 6 7 9 10 11 12 14 15
slot 2 0 9 D 0x01 3 4 5 6 7 9 10 11 12 14 15
slot 3 0 10 A 0x03 3 4 5 6 7 9 10 11 12 14 15
slot 3 0 10 B 0x05 3 4 5 6 7 9 10 11 12 14 15
slot 3 0 10 C 0x01 3 4 5 6 7 9 10 11 12 14 15
slot 3 0 10 D 0x02 3 4 5 6 7 9 10 11 12 14 15
slot 4 0 11 A 0x05 3 4 5 6 7 9 10 11 12 14 15
slot 4 0 11 B 0x01 3 4 5 6 7 9 10 11 12 14 15
slot 4 0 11 C 0x02 3 4 5 6 7 9 10 11 12 14 15
slot 4 0 11 D 0x03 3 4 5 6 7 9 10 11 12 14 15
slot 5 0 12 A 0x01 3 4 5 6 7 9 10 11 12 14 15
slot 5 0 12 B 0x02 3 4 5 6 7 9 10 11 12 14 15
slot 5 0 12 C 0x03 3 4 5 6 7 9 10 11 12 14 15
slot 5 0 12 D 0x05 3 4 5 6 7 9 10 11 12 14 15
slot 6 0 13 A 0x02 3 4 5 6 7 9 10 11 12 14 15
slot 6 0 13 B 0x03 3 4 5 6 7 9 10 11 12 14 15
slot 6 0 13 C 0x05 3 4 5 6 7 9 10 11 12 14 15
slot 6 0 13 D 0x01 3 4 5 6 7 9 10 11 12 14 15
slot 7 0 14 A 0x03 3 4 5 6 7 9 10 11 12 14 15
slot 7 0 14 B 0x05 3 4 5 6 7 9 10 11 12 14 15
slot 7 0 14 C 0x01 3 4 5 6 7 9 10 11 12 14 15
slot 7 0 14 D 0x02 3 4 5 6 7 9 10 11 12 14 15
slot 8 0 15 A 0x05 3 4 5 6 7 9 10 11 12 14 15
slot 8 0 15 B 0x01 3 4 5 6 7 9 10 11 12 14 15
slot 8 0 15 C 0x02 3 4 5 6 7 9 10 11 12 14 15
slot 8 0 15 D 0x03 3 4 5 6 7 9 10 11 12 14 15
slot 9 0 16 A 0x01 3 4 5 6 7 9 10 11 12 14 15
slot 9 0 16 B 0x02 3 4 5 6 7 9 10 11 12 14 15
slot 9 0 16 C 0x03 3 4 5 6 7 9 10 11 12 14 15
slot 9 0 16 D 0x05 3 4 5 6 7 9 10 11 12 14 15
embedded 0 17 C 0x03 3 4 5 6 7 9 10 11 12 14 15
embedded 0 17 D 0x05 3 4 5 6 7 9 10 11 12 14 15
embedded 0 1 A 0x01 3 4 5 6 7 9 10 11 12 14 15
embedded 0 1 B 0x02 3 4 5 6 7 9 10 11 12 14 15
embedded 0 1 C 0x03 3 4 5 6 7 9 10 11 12 14 15
embedded 0 1 D 0x05 3 4 5 6 7 9 10 11 12 14 15
embedded 0 16 A 0x01 3 4 5 6 7 9 10 11 12 14 15
embedded 0 16 B 0x02 3 4 5 6 7 9 10 11 12 14 15
embedded 0 16 C 0x03 3 4 5 6 7 9 10 11 12 14 15
embedded 0 16 D 0x05 3 4 5 6 7 9 10 11 12 14 15
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 17 func 0
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 15 func 1
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 17 func 1
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 15 func 0
acpi0: Power Button (fixed)
pci_link0: <ACPI PCI Link LNKA> irq 10 on acpi0
pci_link0: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 10 N 0 3 4 6 7 10 11 12
pci_link0: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 10 N 0 3 4 6 7 10 11 12
pci_link0: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 6 7 10 11 12
pci_link1: <ACPI PCI Link LNKB> irq 11 on acpi0
pci_link1: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 11 N 0 3 4 6 7 10 11 12
pci_link1: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 11 N 0 3 4 6 7 10 11 12
pci_link1: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 6 7 10 11 12
pci_link2: <ACPI PCI Link LNKC> irq 7 on acpi0
pci_link2: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 7 N 0 3 4 6 7 10 11 12
pci_link2: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 7 N 0 3 4 6 7 10 11 12
pci_link2: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 6 7 10 11 12
pci_link3: <ACPI PCI Link LNKD> irq 5 on acpi0
pci_link3: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 5 N 0 3 4 6 7 10 11 12
pci_link3: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 6 7 10 11 12
pci_link3: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 6 7 10 11 12
ACPI timer: 1/2 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 -> 10
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_throttle0: <ACPI CPU Throttling> on cpu0
acpi_throttle0: P_CNT from P_BLK 0x4010
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: physical bus=0
found-> vendor=0x1106, dev=0x3123, revid=0x00
bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x2230, cachelnsz=0 (dwords)
lattimer=0x08 (240 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
powerspec 2 supports D0 D3 current D0
map[10]: type 3, range 32, base e4000000, size 26, enabled
found-> vendor=0x1106, dev=0xb091, revid=0x00
bus=0, slot=1, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0107, statreg=0xa230, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x0c (3000 ns), maxlat=0x00 (0 ns)
found-> vendor=0x10ec, dev=0x8139, revid=0x10
bus=0, slot=8, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x20 (8000 ns), maxlat=0x40
(16000 ns)
intpin=a, irq=10
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 4, range 32, base 0000db00, size 8, enabled
map[14]: type 1, range 32, base ee11c000, size 8, enabled
pcib0: matched entry for 0.8.INTA (src \_SB_.PCI0.LNKA:0)
pcib0: slot 8 INTA routed to irq 10 via \_SB_.PCI0.LNKA
found-> vendor=0x10ec, dev=0x8139, revid=0x10
bus=0, slot=9, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x20 (8000 ns), maxlat=0x40
(16000 ns)
intpin=a, irq=11
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 4, range 32, base 0000d000, size 8, enabled
map[14]: type 1, range 32, base ee11e000, size 8, enabled
pcib0: matched entry for 0.9.INTA (src \_SB_.PCI0.LNKB:0)
pcib0: slot 9 INTA routed to irq 11 via \_SB_.PCI0.LNKB
found-> vendor=0x10ec, dev=0x8139, revid=0x10
bus=0, slot=10, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x20 (8000 ns), maxlat=0x40
(16000 ns)
intpin=a, irq=7
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 4, range 32, base 0000d100, size 8, enabled
map[14]: type 1, range 32, base ee110000, size 8, enabled
pcib0: matched entry for 0.10.INTA (src \_SB_.PCI0.LNKC:0)
pcib0: slot 10 INTA routed to irq 7 via \_SB_.PCI0.LNKC
found-> vendor=0x10ec, dev=0x8139, revid=0x10
bus=0, slot=11, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x20 (8000 ns), maxlat=0x40
(16000 ns)
intpin=a, irq=5
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 4, range 32, base 0000d200, size 8, enabled
map[14]: type 1, range 32, base ee111000, size 8, enabled
pcib0: matched entry for 0.11.INTA (src \_SB_.PCI0.LNKD:0)
pci_link3: Picked IRQ 9 with weight 0
pcib0: slot 11 INTA routed to irq 9 via \_SB_.PCI0.LNKD
found-> vendor=0x1180, dev=0x0476, revid=0x82
bus=0, slot=12, func=0
class=06-07-00, hdrtype=0x02, mfdev=1
cmdreg=0x0007, statreg=0x0210, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x80 (32000 ns), maxlat=0x07
(1750 ns)
intpin=a, irq=10
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base ee112000, size 12, enabled
pcib0: matched entry for 0.12.INTA (src \_SB_.PCI0.LNKA:0)
pcib0: slot 12 INTA routed to irq 10 via \_SB_.PCI0.LNKA
found-> vendor=0x1180, dev=0x0476, revid=0x82
bus=0, slot=12, func=1
class=06-07-00, hdrtype=0x02, mfdev=1
cmdreg=0x0007, statreg=0x0210, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x80 (32000 ns), maxlat=0x07
(1750 ns)
intpin=b, irq=11
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base ee117000, size 12, enabled
pcib0: matched entry for 0.12.INTB (src \_SB_.PCI0.LNKB:0)
pcib0: slot 12 INTB routed to irq 11 via \_SB_.PCI0.LNKB
found-> vendor=0x12d8, dev=0x8148, revid=0x00
bus=0, slot=13, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0107, statreg=0x02b0, cachelnsz=8 (dwords)
lattimer=0x20 (960 ns), mingnt=0x06 (1500 ns), maxlat=0x00 (0
ns)
found-> vendor=0x1106, dev=0x3038, revid=0x80
bus=0, slot=16, func=0
class=0c-03-00, hdrtype=0x00, mfdev=1
cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
powerspec 2 supports D0 D1 D2 D3 current D0
map[20]: type 4, range 32, base 0000dc00, size 5, enabled
pcib0: matched entry for 0.16.INTA (src \_SB_.PCI0.LNKA:0)
pcib0: slot 16 INTA routed to irq 10 via \_SB_.PCI0.LNKA
found-> vendor=0x1106, dev=0x3038, revid=0x80
bus=0, slot=16, func=1
class=0c-03-00, hdrtype=0x00, mfdev=1
cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=11
powerspec 2 supports D0 D1 D2 D3 current D0
map[20]: type 4, range 32, base 0000dd00, size 5, enabled
pcib0: matched entry for 0.16.INTB (src \_SB_.PCI0.LNKB:0)
pcib0: slot 16 INTB routed to irq 11 via \_SB_.PCI0.LNKB
found-> vendor=0x1106, dev=0x3038, revid=0x80
bus=0, slot=16, func=2
class=0c-03-00, hdrtype=0x00, mfdev=1
cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=c, irq=7
powerspec 2 supports D0 D1 D2 D3 current D0
map[20]: type 4, range 32, base 0000de00, size 5, enabled
pcib0: matched entry for 0.16.INTC (src \_SB_.PCI0.LNKC:0)
pcib0: slot 16 INTC routed to irq 7 via \_SB_.PCI0.LNKC
found-> vendor=0x1106, dev=0x3104, revid=0x82
bus=0, slot=16, func=3
class=0c-03-20, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=d, irq=5
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base ee11d000, size 8, enabled
pcib0: matched entry for 0.16.INTD (src \_SB_.PCI0.LNKD:0)
pcib0: slot 16 INTD routed to irq 9 via \_SB_.PCI0.LNKD
found-> vendor=0x1106, dev=0x3177, revid=0x00
bus=0, slot=17, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x0087, statreg=0x0210, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
powerspec 2 supports D0 D3 current D0
found-> vendor=0x1106, dev=0x0571, revid=0x06
bus=0, slot=17, func=1
class=01-01-8a, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=255
powerspec 2 supports D0 D3 current D0
map[20]: type 4, range 32, base 0000df00, size 4, enabled
found-> vendor=0x1106, dev=0x3059, revid=0x50
bus=0, slot=17, func=5
class=04-01-00, hdrtype=0x00, mfdev=0
cmdreg=0x0001, statreg=0x0210, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=c, irq=7
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 4, range 32, base 0000e000, size 8, enabled
pcib0: matched entry for 0.17.INTC (src \_SB_.PCI0.LNKC:0)
pcib0: slot 17 INTC routed to irq 7 via \_SB_.PCI0.LNKC
agp0: <VIA 862x (CLE266) host to PCI bridge> mem 0xe4000000-0xe7ffffff at
device 0.0 on pci0
agp0: Reserved 0x4000000 bytes for rid 0x10 type 3 at 0xe4000000
agp0: allocating GATT for aperture of size 256M
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pcib1: secondary bus 1
pcib1: subordinate bus 1
pcib1: I/O decode 0xf000-0xfff
pcib1: memory decode 0xec000000-0xedffffff
pcib1: prefetched decode 0xe8000000-0xebffffff
pci1: <PCI bus> on pcib1
pci1: physical bus=1
found-> vendor=0x1106, dev=0x3122, revid=0x03
bus=1, slot=0, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0230, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 3, range 32, base e8000000, size 26, enabled
pcib1: (null) requested memory range 0xe8000000-0xebffffff: good
map[14]: type 1, range 32, base ec000000, size 24, enabled
pcib1: (null) requested memory range 0xec000000-0xecffffff: good
pcib0: matched entry for 0.1.INTA (src \_SB_.PCI0.LNKA:0)
pcib0: slot 1 INTA routed to irq 10 via \_SB_.PCI0.LNKA
pcib1: slot 0 INTA is routed to irq 10
pci1: <display, VGA> at device 0.0 (no driver attached)
rl0: Reserved 0x100 bytes for rid 0x10 type 4 at 0xdb00
rl0: <RealTek 8139 10/100BaseTX> port 0xdb00-0xdbff mem
0xee11c000-0xee11c0ff irq 10 at device 8.0 on pci0
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl0: bpf attached
rl0: Ethernet address: 00:40:48:b1:11:5d
rl0: [MPSAFE]
rl1: Reserved 0x100 bytes for rid 0x10 type 4 at 0xd000
rl1: <RealTek 8139 10/100BaseTX> port 0xd000-0xd0ff mem
0xee11e000-0xee11e0ff irq 11 at device 9.0 on pci0
miibus1: <MII bus> on rl1
rlphy1: <RealTek internal media interface> on miibus1
rlphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl1: bpf attached
rl1: Ethernet address: 00:40:48:b1:11:5c
rl1: [MPSAFE]
rl2: Reserved 0x100 bytes for rid 0x10 type 4 at 0xd100
rl2: <RealTek 8139 10/100BaseTX> port 0xd100-0xd1ff mem
0xee110000-0xee1100ff irq 7 at device 10.0 on pci0
miibus2: <MII bus> on rl2
rlphy2: <RealTek internal media interface> on miibus2
rlphy2: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl2: bpf attached
rl2: Ethernet address: 00:40:48:b1:11:5b
rl2: [MPSAFE]
rl3: Reserved 0x100 bytes for rid 0x10 type 4 at 0xd200
rl3: <RealTek 8139 10/100BaseTX> port 0xd200-0xd2ff mem
0xee111000-0xee1110ff irq 9 at device 11.0 on pci0
miibus3: <MII bus> on rl3
rlphy3: <RealTek internal media interface> on miibus3
rlphy3: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl3: bpf attached
rl3: Ethernet address: 00:40:48:b1:11:5a
rl3: [MPSAFE]
cbb0: <RF5C476 PCI-CardBus Bridge> mem 0xee112000-0xee112fff irq 10 at
device 12.0 on pci0
cbb0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xee112000
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
cbb0: [MPSAFE]
cbb0: PCI Configuration space:
0x00: 0x04761180 0x02100007 0x06070082 0x00822000
0x10: 0xee112000 0x020000dc 0x20020200 0xfffff000
0x20: 0x00000000 0xfffff000 0x00000000 0xfffffffc
0x30: 0x00000000 0xfffffffc 0x00000000 0x0700010a
0x40: 0x78563412 0x00000001 0x00000000 0x00000000
0x50: 0x00000000 0x00000000 0x00000000 0x00000000
0x60: 0x00000000 0x00000000 0x00000000 0x00000000
0x70: 0x00000000 0x00000000 0x00000000 0x00000000
0x80: 0x00a00001 0x00000000 0x04630463 0x00000000
0x90: 0x00000000 0x00000000 0x00000000 0x00000000
0xa0: 0x00000000 0x00000000 0x00000000 0x00000000
0xb0: 0x00000000 0x00000000 0x00003800 0x00000000
0xc0: 0x78563412 0x00000000 0x00000000 0x00000000
0xd0: 0x00000000 0x00000000 0x00000000 0xfe0a0001
0xe0: 0x24c04000 0x00000000 0x00000000 0x00000000
0xf0: 0x00000000 0x00000000 0x00000000 0x00000000
cbb1: <RF5C476 PCI-CardBus Bridge> mem 0xee117000-0xee117fff irq 11 at
device 12.1 on pci0
cbb1: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xee117000
cardbus1: <CardBus bus> on cbb1
pccard1: <16-bit PCCard bus> on cbb1
cbb1: [MPSAFE]
cbb1: PCI Configuration space:
0x00: 0x04761180 0x02100007 0x06070082 0x00822000
0x10: 0xee117000 0x020000dc 0x20030300 0xfffff000
0x20: 0x00000000 0xfffff000 0x00000000 0xfffffffc
0x30: 0x00000000 0xfffffffc 0x00000000 0x0700020b
0x40: 0x78563412 0x00000001 0x00000000 0x00000000
0x50: 0x00000000 0x00000000 0x00000000 0x00000000
0x60: 0x00000000 0x00000000 0x00000000 0x00000000
0x70: 0x00000000 0x00000000 0x00000000 0x00000000
0x80: 0x00a00001 0x00000000 0x04630463 0x00000000
0x90: 0x00000000 0x00000000 0x00000000 0x00000000
0xa0: 0x00000000 0x00000000 0x00000000 0x00000000
0xb0: 0x00000000 0x00000000 0x00000000 0x00000000
0xc0: 0x78563412 0x00000000 0x00000000 0x00000000
0xd0: 0x00000000 0x00000000 0x00000000 0xfe0a0001
0xe0: 0x24c04000 0x00000000 0x00000000 0x00000000
0xf0: 0x00000000 0x00000000 0x00000000 0x00000000
pcib2: <PCI-PCI bridge> at device 13.0 on pci0
pcib2: secondary bus 4
pcib2: subordinate bus 4
pcib2: I/O decode 0xc000-0xcfff
pcib2: memory decode 0xee000000-0xee0fffff
pcib2: prefetched decode 0xfff00000-0xfffff
pci4: <PCI bus> on pcib2
pci4: physical bus=4
found-> vendor=0x10ec, dev=0x8139, revid=0x10
bus=4, slot=8, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x20 (8000 ns), maxlat=0x40
(16000 ns)
intpin=a, irq=11
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 4, range 32, base 0000c000, size 8, enabled
pcib2: (null) requested I/O range 0xc000-0xc0ff: in range
map[14]: type 1, range 32, base ee013000, size 8, enabled
pcib2: (null) requested memory range 0xee013000-0xee0130ff: good
pcib0: matched entry for 0.13.INTA (src \_SB_.PCI0.LNKB:0)
pcib0: slot 13 INTA routed to irq 11 via \_SB_.PCI0.LNKB
pcib2: slot 8 INTA is routed to irq 11
found-> vendor=0x10ec, dev=0x8139, revid=0x10
bus=4, slot=9, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x20 (8000 ns), maxlat=0x40
(16000 ns)
intpin=a, irq=7
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 4, range 32, base 0000c100, size 8, enabled
pcib2: (null) requested I/O range 0xc100-0xc1ff: in range
map[14]: type 1, range 32, base ee010000, size 8, enabled
pcib2: (null) requested memory range 0xee010000-0xee0100ff: good
pcib0: matched entry for 0.13.INTB (src \_SB_.PCI0.LNKC:0)
pcib0: slot 13 INTB routed to irq 7 via \_SB_.PCI0.LNKC
pcib2: slot 9 INTA is routed to irq 7
found-> vendor=0x10ec, dev=0x8139, revid=0x10
bus=4, slot=10, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x20 (8000 ns), maxlat=0x40
(16000 ns)
intpin=a, irq=5
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 4, range 32, base 0000c200, size 8, enabled
pcib2: (null) requested I/O range 0xc200-0xc2ff: in range
map[14]: type 1, range 32, base ee011000, size 8, enabled
pcib2: (null) requested memory range 0xee011000-0xee0110ff: good
pcib0: matched entry for 0.13.INTC (src \_SB_.PCI0.LNKD:0)
pcib0: slot 13 INTC routed to irq 9 via \_SB_.PCI0.LNKD
pcib2: slot 10 INTA is routed to irq 9
found-> vendor=0x10ec, dev=0x8139, revid=0x10
bus=4, slot=11, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x20 (8000 ns), maxlat=0x40
(16000 ns)
intpin=a, irq=10
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 4, range 32, base 0000c300, size 8, enabled
pcib2: (null) requested I/O range 0xc300-0xc3ff: in range
map[14]: type 1, range 32, base ee012000, size 8, enabled
pcib2: (null) requested memory range 0xee012000-0xee0120ff: good
pcib0: matched entry for 0.13.INTD (src \_SB_.PCI0.LNKA:0)
pcib0: slot 13 INTD routed to irq 10 via \_SB_.PCI0.LNKA
pcib2: slot 11 INTA is routed to irq 10
rl4: Reserved 0x100 bytes for rid 0x10 type 4 at 0xc000
pcib2: re0 requested I/O range 0xc000-0xc0ff: in range
pcib2: rl4 requested I/O range 0xc000-0xc0ff: in range
rl4: <RealTek 8139 10/100BaseTX> port 0xc000-0xc0ff mem
0xee013000-0xee0130ff irq 11 at device 8.0 on pci4
pcib2: rl4 requested I/O range 0xc000-0xc0ff: in range
miibus4: <MII bus> on rl4
rlphy4: <RealTek internal media interface> on miibus4
rlphy4: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl4: bpf attached
rl4: Ethernet address: 00:30:18:49:3f:44
rl4: [MPSAFE]
rl5: Reserved 0x100 bytes for rid 0x10 type 4 at 0xc100
pcib2: re0 requested I/O range 0xc100-0xc1ff: in range
pcib2: rl5 requested I/O range 0xc100-0xc1ff: in range
rl5: <RealTek 8139 10/100BaseTX> port 0xc100-0xc1ff mem
0xee010000-0xee0100ff irq 7 at device 9.0 on pci4
pcib2: rl5 requested I/O range 0xc100-0xc1ff: in range
Fatal trap 12: page fault while in kernel mode
cpuid = 0; apic id = 00
fault virtual address = 0x10
fault code = supervisor read, page not present
instruction pointer = 0x20:0xc07407c0
stack pointer = 0x28:0xc0c209ec
frame pointer = 0x28:0xc0c209ec
code segment = base 0x0, limit 0xfffff, type 0x1b
= DPL 0, pres 1, def32 1, gran 1
processor eflags = interrupt enabled, resume, IOPL = 0
current process = 0 (swapper)
trap number = 12
panic: page fault
cpuid = 0
Uptime: 1s
Automatic reboot in 15 seconds - press a key on the console to abort
Rebooting...
SMAP type=01 base=0000000000000000 len=000000000009fc00
SMAP type=02 base=00000000000f0000 len=0000000000010000
SMAP type=02 base=00000000ffff0000 len=0000000000010000
SMAP type=03 base=000000001eff3000 len=000000000000d000
SMAP type=04 base=000000001eff0000 len=0000000000003000
SMAP type=02 base=000000000009fc00 len=0000000000000400
SMAP type=01 base=0000000000100000 len=000000001eef0000
Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights
reserved.
FreeBSD 6.0-RELEASE #0: Thu Nov 3 09:36:13 UTC 2005
root at x64.samsco.home:/usr/obj/usr/src/sys/GENERIC
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0ec1000.
Preloaded mfs_root "/boot/mfsroot" at 0xc0ec1170.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0ec11b4.
Calibrating clock(s) ... i8254 clock: 1193206 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 1002279760 Hz
CPU: VIA C3 Nehemiah+RNG+ACE (1002.28-MHz 686-class CPU)
Origin = "CentaurHauls" Id = 0x698 Stepping = 8
Features=0x381b83f<FPU,VME,DE,PSE,TSC,MSR,SEP,MTRR,PGE,CMOV,PAT,MMX,FXSR,SSE
>
real memory = 520028160 (495 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages)
0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
0x0000000001025000 - 0x000000001e6fffff, 493727744 bytes (120539 pages)
avail memory = 495345664 (472 MB)
bios32: Found BIOS32 Service Directory header at 0xc00faf30
bios32: Entry = 0xfb3b0 (c00fb3b0) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xf0000+0xb400
pnpbios: Found PnP BIOS data at 0xc00fbec0
pnpbios: Entry = f0000:bef0 Rev = 1.0
Other BIOS signatures found:
wlan: <802.11 Link Layer>
random: <entropy source, Hardware, VIA Nehemiah>
nfslock: pseudo-device
io: <I/O>
mem: <memory>
null: <null device, zero device>
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <CLE266 AWRDACPI> on motherboard
acpi0: [MPSAFE]
pci_open(1): mode 1 addr port (0x0cf8) is 0x80000060
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=31231106)
pcibios: BIOS version 2.10
Found $PIR table, 12 entries at 0xc00fdea0
PCI-Only Interrupts: 5 7 10 11
Location Bus Device Pin Link IRQs
slot 1 0 8 A 0x01 3 4 5 6 7 9 10 11 12 14 15
slot 1 0 8 B 0x02 3 4 5 6 7 9 10 11 12 14 15
slot 1 0 8 C 0x03 3 4 5 6 7 9 10 11 12 14 15
slot 1 0 8 D 0x05 3 4 5 6 7 9 10 11 12 14 15
slot 2 0 9 A 0x02 3 4 5 6 7 9 10 11 12 14 15
slot 2 0 9 B 0x03 3 4 5 6 7 9 10 11 12 14 15
slot 2 0 9 C 0x05 3 4 5 6 7 9 10 11 12 14 15
slot 2 0 9 D 0x01 3 4 5 6 7 9 10 11 12 14 15
slot 3 0 10 A 0x03 3 4 5 6 7 9 10 11 12 14 15
slot 3 0 10 B 0x05 3 4 5 6 7 9 10 11 12 14 15
slot 3 0 10 C 0x01 3 4 5 6 7 9 10 11 12 14 15
slot 3 0 10 D 0x02 3 4 5 6 7 9 10 11 12 14 15
slot 4 0 11 A 0x05 3 4 5 6 7 9 10 11 12 14 15
slot 4 0 11 B 0x01 3 4 5 6 7 9 10 11 12 14 15
slot 4 0 11 C 0x02 3 4 5 6 7 9 10 11 12 14 15
slot 4 0 11 D 0x03 3 4 5 6 7 9 10 11 12 14 15
slot 5 0 12 A 0x01 3 4 5 6 7 9 10 11 12 14 15
slot 5 0 12 B 0x02 3 4 5 6 7 9 10 11 12 14 15
slot 5 0 12 C 0x03 3 4 5 6 7 9 10 11 12 14 15
slot 5 0 12 D 0x05 3 4 5 6 7 9 10 11 12 14 15
slot 6 0 13 A 0x02 3 4 5 6 7 9 10 11 12 14 15
slot 6 0 13 B 0x03 3 4 5 6 7 9 10 11 12 14 15
slot 6 0 13 C 0x05 3 4 5 6 7 9 10 11 12 14 15
slot 6 0 13 D 0x01 3 4 5 6 7 9 10 11 12 14 15
slot 7 0 14 A 0x03 3 4 5 6 7 9 10 11 12 14 15
slot 7 0 14 B 0x05 3 4 5 6 7 9 10 11 12 14 15
slot 7 0 14 C 0x01 3 4 5 6 7 9 10 11 12 14 15
slot 7 0 14 D 0x02 3 4 5 6 7 9 10 11 12 14 15
slot 8 0 15 A 0x05 3 4 5 6 7 9 10 11 12 14 15
slot 8 0 15 B 0x01 3 4 5 6 7 9 10 11 12 14 15
slot 8 0 15 C 0x02 3 4 5 6 7 9 10 11 12 14 15
slot 8 0 15 D 0x03 3 4 5 6 7 9 10 11 12 14 15
slot 9 0 16 A 0x01 3 4 5 6 7 9 10 11 12 14 15
slot 9 0 16 B 0x02 3 4 5 6 7 9 10 11 12 14 15
slot 9 0 16 C 0x03 3 4 5 6 7 9 10 11 12 14 15
slot 9 0 16 D 0x05 3 4 5 6 7 9 10 11 12 14 15
embedded 0 17 C 0x03 3 4 5 6 7 9 10 11 12 14 15
embedded 0 17 D 0x05 3 4 5 6 7 9 10 11 12 14 15
embedded 0 1 A 0x01 3 4 5 6 7 9 10 11 12 14 15
embedded 0 1 B 0x02 3 4 5 6 7 9 10 11 12 14 15
embedded 0 1 C 0x03 3 4 5 6 7 9 10 11 12 14 15
embedded 0 1 D 0x05 3 4 5 6 7 9 10 11 12 14 15
embedded 0 16 A 0x01 3 4 5 6 7 9 10 11 12 14 15
embedded 0 16 B 0x02 3 4 5 6 7 9 10 11 12 14 15
embedded 0 16 C 0x03 3 4 5 6 7 9 10 11 12 14 15
embedded 0 16 D 0x05 3 4 5 6 7 9 10 11 12 14 15
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 17 func 0
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 15 func 1
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 17 func 1
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 15 func 0
acpi0: Power Button (fixed)
pci_link0: <ACPI PCI Link LNKA> irq 10 on acpi0
pci_link0: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 10 N 0 3 4 6 7 10 11 12
pci_link0: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 10 N 0 3 4 6 7 10 11 12
pci_link0: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 6 7 10 11 12
pci_link1: <ACPI PCI Link LNKB> irq 11 on acpi0
pci_link1: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 11 N 0 3 4 6 7 10 11 12
pci_link1: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 11 N 0 3 4 6 7 10 11 12
pci_link1: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 6 7 10 11 12
pci_link2: <ACPI PCI Link LNKC> irq 7 on acpi0
pci_link2: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 7 N 0 3 4 6 7 10 11 12
pci_link2: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 7 N 0 3 4 6 7 10 11 12
pci_link2: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 6 7 10 11 12
pci_link3: <ACPI PCI Link LNKD> irq 5 on acpi0
pci_link3: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 5 N 0 3 4 6 7 10 11 12
pci_link3: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 6 7 10 11 12
pci_link3: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 6 7 10 11 12
ACPI timer: 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 -> 10
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_throttle0: <ACPI CPU Throttling> on cpu0
acpi_throttle0: P_CNT from P_BLK 0x4010
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: physical bus=0
found-> vendor=0x1106, dev=0x3123, revid=0x00
bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x2230, cachelnsz=0 (dwords)
lattimer=0x08 (240 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
powerspec 2 supports D0 D3 current D0
map[10]: type 3, range 32, base e4000000, size 26, enabled
found-> vendor=0x1106, dev=0xb091, revid=0x00
bus=0, slot=1, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0107, statreg=0xa230, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x0c (3000 ns), maxlat=0x00 (0 ns)
found-> vendor=0x10ec, dev=0x8139, revid=0x10
bus=0, slot=8, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x20 (8000 ns), maxlat=0x40
(16000 ns)
intpin=a, irq=10
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 4, range 32, base 0000db00, size 8, enabled
map[14]: type 1, range 32, base ee11c000, size 8, enabled
pcib0: matched entry for 0.8.INTA (src \_SB_.PCI0.LNKA:0)
pcib0: slot 8 INTA routed to irq 10 via \_SB_.PCI0.LNKA
found-> vendor=0x10ec, dev=0x8139, revid=0x10
bus=0, slot=9, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x20 (8000 ns), maxlat=0x40
(16000 ns)
intpin=a, irq=11
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 4, range 32, base 0000d000, size 8, enabled
map[14]: type 1, range 32, base ee11e000, size 8, enabled
pcib0: matched entry for 0.9.INTA (src \_SB_.PCI0.LNKB:0)
pcib0: slot 9 INTA routed to irq 11 via \_SB_.PCI0.LNKB
found-> vendor=0x10ec, dev=0x8139, revid=0x10
bus=0, slot=10, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x20 (8000 ns), maxlat=0x40
(16000 ns)
intpin=a, irq=7
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 4, range 32, base 0000d100, size 8, enabled
map[14]: type 1, range 32, base ee110000, size 8, enabled
pcib0: matched entry for 0.10.INTA (src \_SB_.PCI0.LNKC:0)
pcib0: slot 10 INTA routed to irq 7 via \_SB_.PCI0.LNKC
found-> vendor=0x10ec, dev=0x8139, revid=0x10
bus=0, slot=11, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x20 (8000 ns), maxlat=0x40
(16000 ns)
intpin=a, irq=5
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 4, range 32, base 0000d200, size 8, enabled
map[14]: type 1, range 32, base ee111000, size 8, enabled
pcib0: matched entry for 0.11.INTA (src \_SB_.PCI0.LNKD:0)
pci_link3: Picked IRQ 9 with weight 0
pcib0: slot 11 INTA routed to irq 9 via \_SB_.PCI0.LNKD
found-> vendor=0x1180, dev=0x0476, revid=0x82
bus=0, slot=12, func=0
class=06-07-00, hdrtype=0x02, mfdev=1
cmdreg=0x0007, statreg=0x0210, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x80 (32000 ns), maxlat=0x07
(1750 ns)
intpin=a, irq=10
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base ee112000, size 12, enabled
pcib0: matched entry for 0.12.INTA (src \_SB_.PCI0.LNKA:0)
pcib0: slot 12 INTA routed to irq 10 via \_SB_.PCI0.LNKA
found-> vendor=0x1180, dev=0x0476, revid=0x82
bus=0, slot=12, func=1
class=06-07-00, hdrtype=0x02, mfdev=1
cmdreg=0x0007, statreg=0x0210, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x80 (32000 ns), maxlat=0x07
(1750 ns)
intpin=b, irq=11
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base ee117000, size 12, enabled
pcib0: matched entry for 0.12.INTB (src \_SB_.PCI0.LNKB:0)
pcib0: slot 12 INTB routed to irq 11 via \_SB_.PCI0.LNKB
found-> vendor=0x12d8, dev=0x8148, revid=0x00
bus=0, slot=13, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0107, statreg=0x02b0, cachelnsz=8 (dwords)
lattimer=0x20 (960 ns), mingnt=0x06 (1500 ns), maxlat=0x00 (0
ns)
found-> vendor=0x1106, dev=0x3038, revid=0x80
bus=0, slot=16, func=0
class=0c-03-00, hdrtype=0x00, mfdev=1
cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
powerspec 2 supports D0 D1 D2 D3 current D0
map[20]: type 4, range 32, base 0000dc00, size 5, enabled
pcib0: matched entry for 0.16.INTA (src \_SB_.PCI0.LNKA:0)
pcib0: slot 16 INTA routed to irq 10 via \_SB_.PCI0.LNKA
found-> vendor=0x1106, dev=0x3038, revid=0x80
bus=0, slot=16, func=1
class=0c-03-00, hdrtype=0x00, mfdev=1
cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=11
powerspec 2 supports D0 D1 D2 D3 current D0
map[20]: type 4, range 32, base 0000dd00, size 5, enabled
pcib0: matched entry for 0.16.INTB (src \_SB_.PCI0.LNKB:0)
pcib0: slot 16 INTB routed to irq 11 via \_SB_.PCI0.LNKB
found-> vendor=0x1106, dev=0x3038, revid=0x80
bus=0, slot=16, func=2
class=0c-03-00, hdrtype=0x00, mfdev=1
cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=c, irq=7
powerspec 2 supports D0 D1 D2 D3 current D0
map[20]: type 4, range 32, base 0000de00, size 5, enabled
pcib0: matched entry for 0.16.INTC (src \_SB_.PCI0.LNKC:0)
pcib0: slot 16 INTC routed to irq 7 via \_SB_.PCI0.LNKC
found-> vendor=0x1106, dev=0x3104, revid=0x82
bus=0, slot=16, func=3
class=0c-03-20, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=d, irq=5
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base ee11d000, size 8, enabled
pcib0: matched entry for 0.16.INTD (src \_SB_.PCI0.LNKD:0)
pcib0: slot 16 INTD routed to irq 9 via \_SB_.PCI0.LNKD
found-> vendor=0x1106, dev=0x3177, revid=0x00
bus=0, slot=17, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x0087, statreg=0x0210, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
powerspec 2 supports D0 D3 current D0
found-> vendor=0x1106, dev=0x0571, revid=0x06
bus=0, slot=17, func=1
class=01-01-8a, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=255
powerspec 2 supports D0 D3 current D0
map[20]: type 4, range 32, base 0000df00, size 4, enabled
found-> vendor=0x1106, dev=0x3059, revid=0x50
bus=0, slot=17, func=5
class=04-01-00, hdrtype=0x00, mfdev=0
cmdreg=0x0001, statreg=0x0210, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=c, irq=7
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 4, range 32, base 0000e000, size 8, enabled
pcib0: matched entry for 0.17.INTC (src \_SB_.PCI0.LNKC:0)
pcib0: slot 17 INTC routed to irq 7 via \_SB_.PCI0.LNKC
agp0: <VIA 862x (CLE266) host to PCI bridge> mem 0xe4000000-0xe7ffffff at
device 0.0 on pci0
agp0: Reserved 0x4000000 bytes for rid 0x10 type 3 at 0xe4000000
agp0: allocating GATT for aperture of size 256M
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pcib1: secondary bus 1
pcib1: subordinate bus 1
pcib1: I/O decode 0xf000-0xfff
pcib1: memory decode 0xec000000-0xedffffff
pcib1: prefetched decode 0xe8000000-0xebffffff
pci1: <PCI bus> on pcib1
pci1: physical bus=1
found-> vendor=0x1106, dev=0x3122, revid=0x03
bus=1, slot=0, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0230, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 3, range 32, base e8000000, size 26, enabled
pcib1: (null) requested memory range 0xe8000000-0xebffffff: good
map[14]: type 1, range 32, base ec000000, size 24, enabled
pcib1: (null) requested memory range 0xec000000-0xecffffff: good
pcib0: matched entry for 0.1.INTA (src \_SB_.PCI0.LNKA:0)
pcib0: slot 1 INTA routed to irq 10 via \_SB_.PCI0.LNKA
pcib1: slot 0 INTA is routed to irq 10
pci1: <display, VGA> at device 0.0 (no driver attached)
re0: Reserved 0x100 bytes for rid 0x10 type 4 at 0xdb00
rl0: <RealTek 8139 10/100BaseTX> port 0xdb00-0xdbff mem
0xee11c000-0xee11c0ff irq 10 at device 8.0 on pci0
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl0: bpf attached
rl0: Ethernet address: 00:40:48:b1:11:5d
rl0: [MPSAFE]
re0: Reserved 0x100 bytes for rid 0x10 type 4 at 0xd000
rl1: <RealTek 8139 10/100BaseTX> port 0xd000-0xd0ff mem
0xee11e000-0xee11e0ff irq 11 at device 9.0 on pci0
miibus1: <MII bus> on rl1
rlphy1: <RealTek internal media interface> on miibus1
rlphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl1: bpf attached
rl1: Ethernet address: 00:40:48:b1:11:5c
rl1: [MPSAFE]
re0: Reserved 0x100 bytes for rid 0x10 type 4 at 0xd100
rl2: <RealTek 8139 10/100BaseTX> port 0xd100-0xd1ff mem
0xee110000-0xee1100ff irq 7 at device 10.0 on pci0
miibus2: <MII bus> on rl2
rlphy2: <RealTek internal media interface> on miibus2
rlphy2: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl2: bpf attached
rl2: Ethernet address: 00:40:48:b1:11:5b
rl2: [MPSAFE]
re0: Reserved 0x100 bytes for rid 0x10 type 4 at 0xd200
rl3: <RealTek 8139 10/100BaseTX> port 0xd200-0xd2ff mem
0xee111000-0xee1110ff irq 9 at device 11.0 on pci0
miibus3: <MII bus> on rl3
rlphy3: <RealTek internal media interface> on miibus3
rlphy3: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl3: bpf attached
rl3: Ethernet address: 00:40:48:b1:11:5a
rl3: [MPSAFE]
cbb0: <RF5C476 PCI-CardBus Bridge> mem 0xee112000-0xee112fff irq 10 at
device 12.0 on pci0
cbb0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xee112000
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
cbb0: [MPSAFE]
cbb0: PCI Configuration space:
0x00: 0x04761180 0x02100007 0x06070082 0x00822000
0x10: 0xee112000 0x020000dc 0x20020200 0xfffff000
0x20: 0x00000000 0xfffff000 0x00000000 0xfffffffc
0x30: 0x00000000 0xfffffffc 0x00000000 0x0700010a
0x40: 0x78563412 0x00000001 0x00000000 0x00000000
0x50: 0x00000000 0x00000000 0x00000000 0x00000000
0x60: 0x00000000 0x00000000 0x00000000 0x00000000
0x70: 0x00000000 0x00000000 0x00000000 0x00000000
0x80: 0x00a00001 0x00000000 0x04630463 0x00000000
0x90: 0x00000000 0x00000000 0x00000000 0x00000000
0xa0: 0x00000000 0x00000000 0x00000000 0x00000000
0xb0: 0x00000000 0x00000000 0x00003800 0x00000000
0xc0: 0x78563412 0x00000000 0x00000000 0x00000000
0xd0: 0x00000000 0x00000000 0x00000000 0xfe0a0001
0xe0: 0x24c04000 0x00000000 0x00000000 0x00000000
0xf0: 0x00000000 0x00000000 0x00000000 0x00000000
cbb1: <RF5C476 PCI-CardBus Bridge> mem 0xee117000-0xee117fff irq 11 at
device 12.1 on pci0
cbb1: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xee117000
cardbus1: <CardBus bus> on cbb1
pccard1: <16-bit PCCard bus> on cbb1
cbb1: [MPSAFE]
cbb1: PCI Configuration space:
0x00: 0x04761180 0x02100007 0x06070082 0x00822000
0x10: 0xee117000 0x020000dc 0x20030300 0xfffff000
0x20: 0x00000000 0xfffff000 0x00000000 0xfffffffc
0x30: 0x00000000 0xfffffffc 0x00000000 0x0700020b
0x40: 0x78563412 0x00000001 0x00000000 0x00000000
0x50: 0x00000000 0x00000000 0x00000000 0x00000000
0x60: 0x00000000 0x00000000 0x00000000 0x00000000
0x70: 0x00000000 0x00000000 0x00000000 0x00000000
0x80: 0x00a00001 0x00000000 0x04630463 0x00000000
0x90: 0x00000000 0x00000000 0x00000000 0x00000000
0xa0: 0x00000000 0x00000000 0x00000000 0x00000000
0xb0: 0x00000000 0x00000000 0x00000000 0x00000000
0xc0: 0x78563412 0x00000000 0x00000000 0x00000000
0xd0: 0x00000000 0x00000000 0x00000000 0xfe0a0001
0xe0: 0x24c04000 0x00000000 0x00000000 0x00000000
0xf0: 0x00000000 0x00000000 0x00000000 0x00000000
pcib2: <PCI-PCI bridge> at device 13.0 on pci0
pcib2: secondary bus 4
pcib2: subordinate bus 4
pcib2: I/O decode 0xc000-0xcfff
pcib2: memory decode 0xee000000-0xee0fffff
pcib2: prefetched decode 0xfff00000-0xfffff
pci4: <PCI bus> on pcib2
pci4: physical bus=4
found-> vendor=0x10ec, dev=0x8139, revid=0x10
bus=4, slot=8, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x20 (8000 ns), maxlat=0x40
(16000 ns)
intpin=a, irq=11
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 4, range 32, base 0000c000, size 8, enabled
pcib2: (null) requested I/O range 0xc000-0xc0ff: in range
map[14]: type 1, range 32, base ee013000, size 8, enabled
pcib2: (null) requested memory range 0xee013000-0xee0130ff: good
pcib0: matched entry for 0.13.INTA (src \_SB_.PCI0.LNKB:0)
pcib0: slot 13 INTA routed to irq 11 via \_SB_.PCI0.LNKB
pcib2: slot 8 INTA is routed to irq 11
found-> vendor=0x10ec, dev=0x8139, revid=0x10
bus=4, slot=9, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x20 (8000 ns), maxlat=0x40
(16000 ns)
intpin=a, irq=7
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 4, range 32, base 0000c100, size 8, enabled
pcib2: (null) requested I/O range 0xc100-0xc1ff: in range
map[14]: type 1, range 32, base ee010000, size 8, enabled
pcib2: (null) requested memory range 0xee010000-0xee0100ff: good
pcib0: matched entry for 0.13.INTB (src \_SB_.PCI0.LNKC:0)
pcib0: slot 13 INTB routed to irq 7 via \_SB_.PCI0.LNKC
pcib2: slot 9 INTA is routed to irq 7
found-> vendor=0x10ec, dev=0x8139, revid=0x10
bus=4, slot=10, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x20 (8000 ns), maxlat=0x40
(16000 ns)
intpin=a, irq=5
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 4, range 32, base 0000c200, size 8, enabled
pcib2: (null) requested I/O range 0xc200-0xc2ff: in range
map[14]: type 1, range 32, base ee011000, size 8, enabled
pcib2: (null) requested memory range 0xee011000-0xee0110ff: good
pcib0: matched entry for 0.13.INTC (src \_SB_.PCI0.LNKD:0)
pcib0: slot 13 INTC routed to irq 9 via \_SB_.PCI0.LNKD
pcib2: slot 10 INTA is routed to irq 9
found-> vendor=0x10ec, dev=0x8139, revid=0x10
bus=4, slot=11, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x20 (8000 ns), maxlat=0x40
(16000 ns)
intpin=a, irq=10
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 4, range 32, base 0000c300, size 8, enabled
pcib2: (null) requested I/O range 0xc300-0xc3ff: in range
map[14]: type 1, range 32, base ee012000, size 8, enabled
pcib2: (null) requested memory range 0xee012000-0xee0120ff: good
pcib0: matched entry for 0.13.INTD (src \_SB_.PCI0.LNKA:0)
pcib0: slot 13 INTD routed to irq 10 via \_SB_.PCI0.LNKA
pcib2: slot 11 INTA is routed to irq 10
re0: Reserved 0x100 bytes for rid 0x10 type 4 at 0xc000
pcib2: rl4 requested I/O range 0xc000-0xc0ff: in range
pcib2: rl4 requested I/O range 0xc000-0xc0ff: in range
rl4: <RealTek 8139 10/100BaseTX> port 0xc000-0xc0ff mem
0xee013000-0xee0130ff irq 11 at device 8.0 on pci4
pcib2: rl4 requested I/O range 0xc000-0xc0ff: in range
miibus4: <MII bus> on rl4
rlphy4: <RealTek internal media interface> on miibus4
rlphy4: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl4: bpf attached
rl4: Ethernet address: 00:30:18:49:3f:44
rl4: [MPSAFE]
re0: Reserved 0x100 bytes for rid 0x10 type 4 at 0xc100
pcib2: rl5 requested I/O range 0xc100-0xc1ff: in range
pcib2: rl5 requested I/O range 0xc100-0xc1ff: in range
rl5: <RealTek 8139 10/100BaseTX> port 0xc100-0xc1ff mem
0xee010000-0xee0100ff irq 7 at device 9.0 on pci4
pcib2: rl5 requested I/O range 0xc100-0xc1ff: in range
Fatal trap 12: page fault while in kernel mode
fault virtual address = 0x10
fault code = supervisor read, page not present
instruction pointer = 0x20:0xc069c394
stack pointer = 0x28:0xc1020938
frame pointer = 0x28:0xc1020938
code segment = base 0x0, limit 0xfffff, type 0x1b
= DPL 0, pres 1, def32 1, gran 1
processor eflags = interrupt enabled, resume, IOPL = 0
current process = 0 (swapper)
trap number = 12
panic: page fault
Uptime: 1s
Automatic reboot in 15 seconds - press a key on the console to abort
Rebooting...
More information about the freebsd-stable
mailing list