Configuring a DVD burner on 4.10

[DONALD GOODWIN]

I don't know if this is the proper email list, however, I thought I would
give it a go.

Here is the problem:

I have a Sony 710A DVD burner.  The box is running 4.10 and I put all the
neccessary options in my kernel config file and rebuilt everyting.

The drive is seen by the OS.  I can mount it using a normal CD-R.  But when
I try to use it for a burner, it doesn't work (get a bad ioctl message).

When I run camcontrol devlist, the drive shows up on bus 2.  But, when I run
cdrecord, bus 2 is not seen.  Camcontrol reports the device (/dev/adc0a) is
using pass4.  But there is no /dev/pass4 device in /dev.

The message i get is inapproriate ioctl.  Driving me nuts.
Thoughts/pointers/questions are greatly appreciated.

Best regards,

Donald

----- Original Message ----- 
From: "Vlad Manilici" <vman at tmok.com>
To: "Erik Trulsson" <ertr1013 at student.uu.se>
Cc: <freebsd-stable at freebsd.org>
Sent: Sunday, November 21, 2004 5:25 PM
Subject: Re: CVS/cvsup problems (ports/74157)


> > I use CVS to check out from my own local copy of the repository (which
> > it seems you do too.) I use CVSup to keep my local copy of the
> > repository updated (cvsuping from cvsup.dk.freebsd.org)
>
> Me wrong, I found it in the Handbook:
>
> A.5.5:
>
> cvs-all release=cvs
>
> Thanks & CU,
> Vlad
>
> _______________________________________________
> freebsd-stable at freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-stable
> To unsubscribe, send any mail to "freebsd-stable-unsubscribe at freebsd.org"
>