4.8 installer failure with intel ICH4 ata controller
Ben Mesander
ben at kaosol.net
Tue Jul 29 20:47:26 PDT 2003
I'm trying to install 4.8 from cdrom. I get to the kernel config menu,
select the first option, install without configuring a kernel, and the boot
process hangs accessing the cdrom. ad0 (the hard drive) is recognized fine.
The cdrom does:
acd0: MODE_SENSE_BIG command timeout - resetting
ata1: resetting devices .. done
over and over. Finally I get to the screen "Probing devices, please wait
(this can take a while)" and the installer hangs.
acd0 is on ata1. I have tried booting with:
set hw.ata.ata_dma=0
set hw.ata.wc=0
I have also tried disabling udma support for this drive in the BIOS.
Also, I have an intel ICH4 controller which is in the supported list.
There seems to be a pr open on this, 36610. How can I tell if this is the
problem I have? Is there anything I can do, such as trying a different
cdrom drive?
The drive works fine with both windows 2000 and rhat linux 9.
Thanks.
--Ben
More information about the freebsd-stable
mailing list