smp problem with hp proliant dl360 on fbsd 6.0-rel

[OxY]

unfortunately i can't boot with verbose logging, it
is freezing to death by acpi (discussing this matter on acpi maillist).
these are the last lines:

Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
 The Regents of the University of California. All rights reserved.
FreeBSD 6.0-RELEASE #0: Thu Nov 24 21:24:29 CET 2005
    root at db:/usr/obj/usr/src/sys/DbField
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel Pentium III (797.48-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x683  Stepping = 3
  Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory  = 536854528 (511 MB)
avail memory = 520134656 (496 MB)
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <COMPAQ_MICRO> on motherboard
acpi0: Power Button (fixed)
pci_link0: <ACPI PCI Link FAKE> on acpi0
pci_link1: <ACPI PCI Link INA0> on acpi0

then it freezes to death..
however i can only shut down when i press
the power button for 5 sec (acpi is working?)

----- Original Message ----- 
From: "Mark Kirkwood" <markir at paradise.net.nz>
To: "OxY" <oxy at field.hu>
Sent: Monday, November 28, 2005 11:16 PM
Subject: Re: smp problem with hp proliant dl360 on fbsd 6.0-rel


> OxY wrote:
>> well, i don't see this line, nothin' like this, so
>> here's what you asked for:
>>
>> http://green.field.hu/dmesg.txt
>> http://green.field.hu/mptable.txt
>> http://green.field.hu/conf.txt
>>
>> i hope it helps..
>>
>> ps: should i comment out device apm and build a new kernel?
>>
>
> Hi there -
>
> Fasinating, I was expecting that mptable would display errors, but it 
> looks ok (however it does not seem to be picked up at boot - see next).
>
> With respect to the dmesg, clearly the system does not seem to recognize 
> the dual board - also I see no mptable header and no apics either (see 
> footnote below)- we need a verbose dmesg (boot -v or pick the 'boot with 
> verbose messages' menu option) to help you any more than that!
>
> The url in jmc's message looked promising - definitely worth setting your 
> BIOS as indicated there, and seeing if the mptable and ioapics show up!
>
> Good luck
>
> Mark
>
> P.s : Recommend replying to the list as well, so that others more 
> knowlegeable than I can help you too!
>
>
> Footnote:
>
> Here is the fist few lines of the dmesg for my dual system - you 
> definitely want to look for the MPTable header and the ioapic lines
>
> Copyright (c) 1992-2005 The FreeBSD Project.
> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
>         The Regents of the University of California. All rights reserved.
> FreeBSD 6.0-RELEASE #0: Wed Nov 16 19:09:19 NZDT 2005
>     root at ikker.markir.net:/usr/obj/usr/src/sys/STANDARD
> Timecounter "i8254" frequency 1193182 Hz quality 0
> CPU: Intel Pentium III (996.84-MHz 686-class CPU)
>   Origin = "GenuineIntel"  Id = 0x68a  Stepping = 10
>
> Features=0x387fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,PN,MMX,FXSR,SSE>
> real memory  = 2147483648 (2048 MB)
> avail memory = 2096533504 (1999 MB)
> MPTable: <AMI      CNB30LE     >
> FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
>  cpu0 (BSP): APIC ID:  0
>  cpu1 (AP): APIC ID:  1
> ioapic0: Assuming intbase of 0
> ioapic1: Assuming intbase of 16
> ioapic0 <Version 1.1> irqs 0-15 on motherboard
> ioapic1 <Version 1.1> irqs 16-31 on motherboard
>
>
>
>
>
>
>