[Bug 240145] [smartpqi][zfs] kernel panic with hanging vdev
bugzilla-noreply at freebsd.org
bugzilla-noreply at freebsd.org
Wed Aug 28 11:27:39 UTC 2019
https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=240145
Peter Eriksson <pen at lysator.liu.se> changed:
What |Removed |Added
----------------------------------------------------------------------------
CC| |pen at lysator.liu.se
--- Comment #3 from Peter Eriksson <pen at lysator.liu.se> ---
Just another (rather worthless, but anyway) datapoint:
The same thing happened to us on one of our production file servers just this
Monday during prime daytime (1pm). No Scrub running just a normal load of SMB
and NFS traffic (some ~400 SMB clients and ~40 NFS clients).
FreeBSD kernel: 11.2-RELEASE-p10
Hardware: Dell PowerEdge R730xd with LSI SAS3008 (Dell-branded) HBA and the
DATA pool the error occured in has 12 x 10TN SAS 7200rpm drives in a RAID-Z2
config.
After the reboot no errors could be found via Smartctl or in any logs (other
than the "panic" message on the disk (or any other disk)
The vdev pointed at in the panic message was the one named
"diskid/DISK-7PK8RSLC" below
# zpool status -v DATA
pool: DATA
state: ONLINE
scan: scrub repaired 0 in 83h42m with 0 errors on Tue Jan 8 07:44:05 2019
config:
NAME STATE READ WRITE CKSUM
DATA ONLINE 0 0 0
raidz2-0 ONLINE 0 0 0
diskid/DISK-7PK784UC ONLINE 0 0 0
diskid/DISK-7PK2GT9G ONLINE 0 0 0
diskid/DISK-7PK8RSLC ONLINE 0 0 0
diskid/DISK-7PK77Z2C ONLINE 0 0 0
diskid/DISK-7PK1U91G ONLINE 0 0 0
diskid/DISK-7PK2GBPG ONLINE 0 0 0
raidz2-1 ONLINE 0 0 0
diskid/DISK-7PK1AZ4G ONLINE 0 0 0
diskid/DISK-7PK2GEEG ONLINE 0 0 0
diskid/DISK-7PK14ARG ONLINE 0 0 0
diskid/DISK-7PK7HS5C ONLINE 0 0 0
diskid/DISK-7PK2GERG ONLINE 0 0 0
diskid/DISK-7PK200TG ONLINE 0 0 0
logs
diskid/DISK-BTHV7146043R400NGN ONLINE 0 0 0
diskid/DISK-BTHV715403A9400NGN ONLINE 0 0 0
cache
diskid/DISK-CVCQ72660083400AGN ONLINE 0 0 0
spares
diskid/DISK-7PK1RNVG AVAIL
diskid/DISK-7PK784NC AVAIL
errors: No known data errors
# sas3ircu 0 DISPLAY
Avago Technologies SAS3 IR Configuration Utility.
Version 11.00.00.00 (2015.08.04)
Copyright (c) 2009-2015 Avago Technologies. All rights reserved.
Read configuration has been initiated for controller 0
------------------------------------------------------------------------
Controller information
------------------------------------------------------------------------
Controller type : SAS3008
BIOS version : 8.37.00.00
Firmware version : 16.00.04.00
Channel description : 1 Serial Attached SCSI
Initiator ID : 0
Maximum physical devices : 543
Concurrent commands supported : 9584
Slot : 5
Segment : 0
Bus : 2
Device : 0
Function : 0
RAID Support : No
...
Device is a Hard disk
Enclosure # : 2
Slot # : 2
SAS Address : 5000cca-2-51b8-fbb1
State : Ready (RDY)
Size (in MB)/(in sectors) : 9470975/2424569855
Manufacturer : HGST
Model Number : HUH721010AL4200
Firmware Revision : LS17
Serial No : 7PK8RSLC
GUID : N/A
Protocol : SAS
Drive Type : SAS_HDD
...
--
You are receiving this mail because:
You are the assignee for the bug.
More information about the freebsd-scsi
mailing list