ch(4) FreeBSD 11.1 jails
Scott Long
scottl at samsco.org
Sun Dec 17 16:39:16 UTC 2017
Hi Dan,
I agree with you, truss definitely shows that it’s failing with the open(“pass7”)
call. Nothing in the src/sys/cam/scsi/scsi_pass.c code that has changed
regarding ‘open’ semantics since FreeBSD 9 in 2012. There is a check in
the code against the securelevel of the system. That code was added a
LONG time ago, but maybe something has changed with securelevel. I
guess it’s worth a look on your system to look at the kern.securelevel
sysctl both inside and outside of the jail. If it’s not that then something
outside of CAM, either in devfs or in the syscall layer, has changed.
Scott
> On Dec 17, 2017, at 9:32 AM, Dan Langille <dan at langille.org> wrote:
>
>
>
>
>> On Dec 17, 2017, at 11:27 AM, Dan Langille <dan at langille.org> wrote:
>>
>>>> On Dec 16, 2017, at 3:05 PM, Dan Langille <dan at langille.org> wrote:
>>>>
>>>> I'm trying to access a tape library from within a FreeBSD 11 jail.
>>>>
>>>> I've added this to the host system:
>>>>
>>>> [devfsrules_jail_unhide_tapes=5]
>>>> add path sa0 unhide
>>>> add path pass0 unhide
>>>> add path pass7 unhide mode 0600
>>>> add path ch0 unhide
>>>> add path nsa0 unhide
>>>>
>>>> add path sa1 unhide
>>>> add path pass8 unhide
>>>> add path pass9 unhide mode 0600
>>>> add path ch1 unhide
>>>> add path nsa1 unhide
>>>>
>>>>
>>>> [devfsrules_jail_bacula=6]
>>>> add include $devfsrules_hide_all
>>>> add include $devfsrules_unhide_basic
>>>> add include $devfsrules_unhide_login
>>>> add path zfs unhide
>>>> add include $devfsrules_jail_unhide_tapes
>>>>
>>>>
>>>>
>>>> The jail can see the devices, and query the tape drive, but not the changer:
>>>>
>>>> $ sudo mtx -f /dev/pass7 status
>>>> cannot open SCSI device '/dev/pass7' - Operation not permitted
>>>>
>>>> The same command in the jail host succeeds.
>>>>
>>>> Is there something more special I'm missing about FreeBSD 11.1? This worked for me under 10.3.
>>>>
>>>> Thank you.
>>>>
>>>>
>>>> --
>>>> Dan Langille - BSDCan / PGCon
>>>> dan at langille.org
>>>>
>>>>
>>>> _______________________________________________
>>>> freebsd-scsi at freebsd.org mailing list
>>>> https://lists.freebsd.org/mailman/listinfo/freebsd-scsi
>>>> To unsubscribe, send any mail to "freebsd-scsi-unsubscribe at freebsd.org"
>>>
>>
>>> On Dec 16, 2017, at 5:53 PM, Scott Long <scottl at samsco.org> wrote:
>>>
>>> Hi Dan,
>>>
>>> Try unhiding and giving permissions to /dev/xpt0. Not sure if something changed there between 10.x and 11.x, but I suspect that it would be necessary regardless. A truss/ktrace output will be necessary if that doesn’t work.
>>>
>>> Scott
>>>
>>> Sent from my iPhone
>>>
>>
>> Background: the host devices from the tape library:
>>
>> <IBM ULT3580-HH4 C7Q1> at scbus1 target 4 lun 0 (pass1,sa0)
>> <IBM 3573-TL B.60> at scbus1 target 4 lun 1 (pass7,ch0)
>> <IBM ULT3580-HH4 C7Q1> at scbus1 target 5 lun 0 (pass8,sa1)
>> <IBM 3573-TL B.60> at scbus1 target 5 lun 1 (pass9,ch1)
>>
>>
>> The devices the jail can see:
>>
>> [dan at bacula-sd-02:~] $ ls -l /dev
>> total 1
>> crw------- 1 root operator 0x6b Dec 16 21:52 ch0
>> crw------- 1 root operator 0x6c Dec 16 21:52 ch1
>> dr-xr-xr-x 2 root wheel 512 Dec 16 21:52 fd
>> lrwxr-xr-x 1 root wheel 14 Dec 16 22:02 log -> ../var/run/log
>> crw-rw---- 1 root operator 0x65 Dec 16 21:52 nsa0
>> crw-rw---- 1 root operator 0x69 Dec 16 21:52 nsa1
>> crw-rw-rw- 1 root wheel 0x1b Dec 17 16:16 null
>> crw------- 1 root operator 0x6d Dec 16 21:52 pass0
>> crw------- 1 root operator 0x74 Dec 16 21:52 pass7
>> crw------- 1 root operator 0x75 Dec 16 21:52 pass8
>> crw------- 1 root operator 0x76 Dec 16 21:52 pass9
>> dr-xr-xr-x 2 root wheel 512 Dec 17 16:16 pts
>> crw-r--r-- 1 root wheel 0x7 Dec 16 21:52 random
>> crw-rw---- 1 root operator 0x64 Dec 16 21:52 sa0
>> crw-rw---- 1 root operator 0x68 Dec 16 21:52 sa1
>> lrwxr-xr-x 1 root wheel 4 Dec 16 22:02 stderr -> fd/2
>> lrwxr-xr-x 1 root wheel 4 Dec 16 22:02 stdin -> fd/0
>> lrwxr-xr-x 1 root wheel 4 Dec 16 22:02 stdout -> fd/1
>> lrwxr-xr-x 1 root wheel 6 Dec 16 22:02 urandom -> random
>> crw-rw-rw- 1 root wheel 0x1c Dec 16 21:52 zero
>> crw-rw-rw- 1 root operator 0x48 Dec 16 21:52 zfs
>> [dan at bacula-sd-02:~] $
>>
>> This command on the host:
>>
>> [root at r710-01:~] # mtx -f /dev/pass7 status | head
>> Storage Changer /dev/pass7:2 Drives, 47 Slots ( 0 Import/Export )
>> Data Transfer Element 0:Full (Storage Element 1 Loaded):VolumeTag = 000001L4
>> Data Transfer Element 1:Empty
>> Storage Element 1:Empty
>> Storage Element 2:Empty
>> Storage Element 3:Empty
>> Storage Element 4:Empty
>> Storage Element 5:Empty
>> Storage Element 6:Empty
>> Storage Element 7:Empty
>>
>>
>> Same command in the jail:
>>
>> [root at bacula-sd-02 ~]# mtx -f /dev/pass7 status
>> cannot open SCSI device '/dev/pass7' - Operation not permitted
>>
>> Same command with truss:
>>
>> [root at bacula-sd-02 ~]# truss mtx -f /dev/pass7 status
>> mmap(0x0,32768,PROT_READ|PROT_WRITE,MAP_PRIVATE|MAP_ANON,-1,0x0) = 34366197760 (0x800629000)
>> issetugid() = 0 (0x0)
>> lstat("/etc",{ mode=drwxr-xr-x ,inode=19,size=117,blksize=7680 }) = 0 (0x0)
>> lstat("/etc/libmap.conf",{ mode=-rw-r--r-- ,inode=13724,size=109,blksize=4096 }) = 0 (0x0)
>> openat(AT_FDCWD,"/etc/libmap.conf",O_RDONLY|O_CLOEXEC,00) = 3 (0x3)
>> fstat(3,{ mode=-rw-r--r-- ,inode=13724,size=109,blksize=4096 }) = 0 (0x0)
>> mmap(0x0,109,PROT_READ,MAP_PRIVATE,3,0x0) = 34366230528 (0x800631000)
>> close(3) = 0 (0x0)
>> lstat("/usr",{ mode=drwxr-xr-x ,inode=23,size=15,blksize=4096 }) = 0 (0x0)
>> lstat("/usr/local",{ mode=drwxr-xr-x ,inode=214,size=14,blksize=4096 }) = 0 (0x0)
>> lstat("/usr/local/etc",{ mode=drwxr-xr-x ,inode=32826,size=29,blksize=4096 }) = 0 (0x0)
>> lstat("/usr/local/etc/libmap.d",0x7fffffffc548) ERR#2 'No such file or directory'
>> munmap(0x800631000,109) = 0 (0x0)
>> openat(AT_FDCWD,"/var/run/ld-elf.so.hints",O_RDONLY|O_CLOEXEC,00) = 3 (0x3)
>> read(3,"Ehnt\^A\0\0\0\M^@\0\0\0f\0\0\0\0"...,128) = 128 (0x80)
>> fstat(3,{ mode=-r--r--r-- ,inode=66965,size=230,blksize=4096 }) = 0 (0x0)
>> lseek(3,0x80,SEEK_SET) = 128 (0x80)
>> read(3,"/lib:/usr/lib:/usr/lib/compat:/u"...,102) = 102 (0x66)
>> close(3) = 0 (0x0)
>> access("/lib/libcam.so.7",F_OK) = 0 (0x0)
>> openat(AT_FDCWD,"/lib/libcam.so.7",O_RDONLY|O_CLOEXEC|O_VERIFY,00) = 3 (0x3)
>> fstat(3,{ mode=-r--r--r-- ,inode=141,size=201240,blksize=131072 }) = 0 (0x0)
>> mmap(0x0,4096,PROT_READ,MAP_PRIVATE|MAP_PREFAULT_READ,3,0x0) = 34366230528 (0x800631000)
>> mmap(0x0,2297856,PROT_NONE,MAP_PRIVATE|MAP_ANON|MAP_NOCORE,-1,0x0) = 34368299008 (0x80082a000)
>> mmap(0x80082a000,176128,PROT_READ|PROT_EXEC,MAP_PRIVATE|MAP_FIXED|MAP_NOCORE|MAP_PREFAULT_READ,3,0x0) = 34368299008 (0x80082a000)
>> mmap(0x800a54000,28672,PROT_READ|PROT_WRITE,MAP_PRIVATE|MAP_FIXED|MAP_PREFAULT_READ,3,0x2a000) = 34370568192 (0x800a54000)
>> munmap(0x800631000,4096) = 0 (0x0)
>> close(3) = 0 (0x0)
>> access("/lib/libc.so.7",F_OK) = 0 (0x0)
>> openat(AT_FDCWD,"/lib/libc.so.7",O_RDONLY|O_CLOEXEC|O_VERIFY,00) = 3 (0x3)
>> fstat(3,{ mode=-r--r--r-- ,inode=168,size=1761320,blksize=131072 }) = 0 (0x0)
>> mmap(0x0,4096,PROT_READ,MAP_PRIVATE|MAP_PREFAULT_READ,3,0x0) = 34366230528 (0x800631000)
>> mmap(0x0,3899392,PROT_NONE,MAP_PRIVATE|MAP_ANON|MAP_NOCORE,-1,0x0) = 34370596864 (0x800a5b000)
>> mmap(0x800a5b000,1646592,PROT_READ|PROT_EXEC,MAP_PRIVATE|MAP_FIXED|MAP_NOCORE|MAP_PREFAULT_READ,3,0x0) = 34370596864 (0x800a5b000)
>> mmap(0x800ded000,49152,PROT_READ|PROT_WRITE,MAP_PRIVATE|MAP_FIXED|MAP_PREFAULT_READ,3,0x192000) = 34374340608 (0x800ded000)
>> mmap(0x800df9000,106496,PROT_READ|PROT_WRITE,MAP_PRIVATE|MAP_FIXED|MAP_ANON,-1,0x0) = 34374389760 (0x800df9000)
>> munmap(0x800631000,4096) = 0 (0x0)
>> close(3) = 0 (0x0)
>> access("/lib/libsbuf.so.6",F_OK) = 0 (0x0)
>> openat(AT_FDCWD,"/lib/libsbuf.so.6",O_RDONLY|O_CLOEXEC|O_VERIFY,00) = 3 (0x3)
>> fstat(3,{ mode=-r--r--r-- ,inode=137,size=11312,blksize=11776 }) = 0 (0x0)
>> mmap(0x0,4096,PROT_READ,MAP_PRIVATE|MAP_PREFAULT_READ,3,0x0) = 34366230528 (0x800631000)
>> mmap(0x0,2109440,PROT_NONE,MAP_PRIVATE|MAP_ANON|MAP_NOCORE,-1,0x0) = 34374496256 (0x800e13000)
>> mmap(0x800e13000,12288,PROT_READ|PROT_EXEC,MAP_PRIVATE|MAP_FIXED|MAP_NOCORE|MAP_PREFAULT_READ,3,0x0) = 34374496256 (0x800e13000)
>> mmap(0x801015000,4096,PROT_READ|PROT_WRITE,MAP_PRIVATE|MAP_FIXED|MAP_PREFAULT_READ,3,0x2000) = 34376601600 (0x801015000)
>> munmap(0x800631000,4096) = 0 (0x0)
>> close(3) = 0 (0x0)
>> mmap(0x0,40960,PROT_READ|PROT_WRITE,MAP_PRIVATE|MAP_ANON,-1,0x0) = 34366230528 (0x800631000)
>> munmap(0x800634000,28672) = 0 (0x0)
>> mmap(0x0,102400,PROT_READ|PROT_WRITE,MAP_PRIVATE|MAP_ANON,-1,0x0) = 34366242816 (0x800634000)
>> sysarch(AMD64_SET_FSBASE,0x7fffffffdf08) = 0 (0x0)
>> sigprocmask(SIG_BLOCK,{ SIGHUP|SIGINT|SIGQUIT|SIGKILL|SIGPIPE|SIGALRM|SIGTERM|SIGURG|SIGSTOP|SIGTSTP|SIGCONT|SIGCHLD|SIGTTIN|SIGTTOU|SIGIO|SIGXCPU|SIGXFSZ|SIGVTALRM|SIGPROF|SIGWINCH|SIGINFO|SIGUSR1|SIGUSR2 },{ }) = 0 (0x0)
>> sigprocmask(SIG_SETMASK,{ },0x0) = 0 (0x0)
>> readlink("/etc/malloc.conf",0x7fffffffd600,1024) ERR#2 'No such file or directory'
>> issetugid() = 0 (0x0)
>> __sysctl(0x7fffffffd4a0,0x2,0x7fffffffd4f0,0x7fffffffd4e8,0x800bbcc93,0xd) = 0 (0x0)
>> __sysctl(0x7fffffffd4f0,0x2,0x7fffffffd5b4,0x7fffffffd5a8,0x0,0x0) = 0 (0x0)
>> mmap(0x0,2097152,PROT_READ|PROT_WRITE,MAP_PRIVATE|MAP_ANON,-1,0x0) = 34376605696 (0x801016000)
>> munmap(0x801016000,2097152) = 0 (0x0)
>> mmap(0x0,4190208,PROT_READ|PROT_WRITE,MAP_PRIVATE|MAP_ANON,-1,0x0) = 34376605696 (0x801016000)
>> munmap(0x801016000,2007040) = 0 (0x0)
>> munmap(0x801400000,86016) = 0 (0x0)
>> sigprocmask(SIG_BLOCK,{ SIGHUP|SIGINT|SIGQUIT|SIGKILL|SIGPIPE|SIGALRM|SIGTERM|SIGURG|SIGSTOP|SIGTSTP|SIGCONT|SIGCHLD|SIGTTIN|SIGTTOU|SIGIO|SIGXCPU|SIGXFSZ|SIGVTALRM|SIGPROF|SIGWINCH|SIGINFO|SIGUSR1|SIGUSR2 },{ }) = 0 (0x0)
>> sigprocmask(SIG_SETMASK,{ },0x0) = 0 (0x0)
>> sigprocmask(SIG_BLOCK,{ SIGHUP|SIGINT|SIGQUIT|SIGKILL|SIGPIPE|SIGALRM|SIGTERM|SIGURG|SIGSTOP|SIGTSTP|SIGCONT|SIGCHLD|SIGTTIN|SIGTTOU|SIGIO|SIGXCPU|SIGXFSZ|SIGVTALRM|SIGPROF|SIGWINCH|SIGINFO|SIGUSR1|SIGUSR2 },{ }) = 0 (0x0)
>> sigprocmask(SIG_SETMASK,{ },0x0) = 0 (0x0)
>> sigprocmask(SIG_BLOCK,{ SIGHUP|SIGINT|SIGQUIT|SIGKILL|SIGPIPE|SIGALRM|SIGTERM|SIGURG|SIGSTOP|SIGTSTP|SIGCONT|SIGCHLD|SIGTTIN|SIGTTOU|SIGIO|SIGXCPU|SIGXFSZ|SIGVTALRM|SIGPROF|SIGWINCH|SIGINFO|SIGUSR1|SIGUSR2 },{ }) = 0 (0x0)
>> sigprocmask(SIG_SETMASK,{ },0x0) = 0 (0x0)
>> sigprocmask(SIG_BLOCK,{ SIGHUP|SIGINT|SIGQUIT|SIGKILL|SIGPIPE|SIGALRM|SIGTERM|SIGURG|SIGSTOP|SIGTSTP|SIGCONT|SIGCHLD|SIGTTIN|SIGTTOU|SIGIO|SIGXCPU|SIGXFSZ|SIGVTALRM|SIGPROF|SIGWINCH|SIGINFO|SIGUSR1|SIGUSR2 },{ }) = 0 (0x0)
>> sigprocmask(SIG_SETMASK,{ },0x0) = 0 (0x0)
>> mmap(0x0,2097152,PROT_READ|PROT_WRITE,MAP_PRIVATE|MAP_ANON,-1,0x0) = 34380709888 (0x801400000)
>> openat(AT_FDCWD,"/dev/pass7",O_RDWR|O_EXCL,00) ERR#1 'Operation not permitted'
>> stat("/usr/share/nls/C/libc.cat",0x7fffffffdea8) ERR#2 'No such file or directory'
>> stat("/usr/share/nls/libc/C",0x7fffffffdea8) ERR#2 'No such file or directory'
>> stat("/usr/local/share/nls/C/libc.cat",0x7fffffffdea8) ERR#2 'No such file or directory'
>> stat("/usr/local/share/nls/libc/C",0x7fffffffdea8) ERR#2 'No such file or directory'
>> cannot open SCSI device '/dev/pass7' - Operation not permitted
>> write(2,"cannot open SCSI device '/dev/pa"...,63) = 63 (0x3f)
>> sigprocmask(SIG_BLOCK,{ SIGHUP|SIGINT|SIGQUIT|SIGKILL|SIGPIPE|SIGALRM|SIGTERM|SIGURG|SIGSTOP|SIGTSTP|SIGCONT|SIGCHLD|SIGTTIN|SIGTTOU|SIGIO|SIGXCPU|SIGXFSZ|SIGVTALRM|SIGPROF|SIGWINCH|SIGINFO|SIGUSR1|SIGUSR2 },{ }) = 0 (0x0)
>> sigprocmask(SIG_SETMASK,{ },0x0) = 0 (0x0)
>> sigprocmask(SIG_BLOCK,{ SIGHUP|SIGINT|SIGQUIT|SIGKILL|SIGPIPE|SIGALRM|SIGTERM|SIGURG|SIGSTOP|SIGTSTP|SIGCONT|SIGCHLD|SIGTTIN|SIGTTOU|SIGIO|SIGXCPU|SIGXFSZ|SIGVTALRM|SIGPROF|SIGWINCH|SIGINFO|SIGUSR1|SIGUSR2 },{ }) = 0 (0x0)
>> sigprocmask(SIG_SETMASK,{ },0x0) = 0 (0x0)
>> sigprocmask(SIG_BLOCK,{ SIGHUP|SIGINT|SIGQUIT|SIGKILL|SIGPIPE|SIGALRM|SIGTERM|SIGURG|SIGSTOP|SIGTSTP|SIGCONT|SIGCHLD|SIGTTIN|SIGTTOU|SIGIO|SIGXCPU|SIGXFSZ|SIGVTALRM|SIGPROF|SIGWINCH|SIGINFO|SIGUSR1|SIGUSR2 },{ }) = 0 (0x0)
>> sigprocmask(SIG_SETMASK,{ },0x0) = 0 (0x0)
>> sigprocmask(SIG_BLOCK,{ SIGHUP|SIGINT|SIGQUIT|SIGKILL|SIGPIPE|SIGALRM|SIGTERM|SIGURG|SIGSTOP|SIGTSTP|SIGCONT|SIGCHLD|SIGTTIN|SIGTTOU|SIGIO|SIGXCPU|SIGXFSZ|SIGVTALRM|SIGPROF|SIGWINCH|SIGINFO|SIGUSR1|SIGUSR2 },{ }) = 0 (0x0)
>> sigprocmask(SIG_SETMASK,{ },0x0) = 0 (0x0)
>> sigprocmask(SIG_BLOCK,{ SIGHUP|SIGINT|SIGQUIT|SIGKILL|SIGPIPE|SIGALRM|SIGTERM|SIGURG|SIGSTOP|SIGTSTP|SIGCONT|SIGCHLD|SIGTTIN|SIGTTOU|SIGIO|SIGXCPU|SIGXFSZ|SIGVTALRM|SIGPROF|SIGWINCH|SIGINFO|SIGUSR1|SIGUSR2 },{ }) = 0 (0x0)
>> sigprocmask(SIG_SETMASK,{ },0x0) = 0 (0x0)
>> exit(0x1)
>> process exit, rval = 1
>> [root at bacula-sd-02 ~]#
>>
>>
> I forgot to do xpt0... here it is:
>
> ALSO: Diff between the two is here: https://gist.github.com/dlangille/b80ee804b8080e1cbf5b5ab67f0bdabe/revisions
>
> From the jail:
>
> [dan at bacula-sd-02:~] $ ls -l /dev/xpt0
> crw------- 1 root operator 0x4c Dec 16 21:52 /dev/xpt0
> [dan at bacula-sd-02:~] $
>
>
> [dan at bacula-sd-02:~] $ truss mtx -f /dev/pass7 status
> mmap(0x0,32768,PROT_READ|PROT_WRITE,MAP_PRIVATE|MAP_ANON,-1,0x0) = 34366197760 (0x800629000)
> issetugid() = 0 (0x0)
> lstat("/etc",{ mode=drwxr-xr-x ,inode=19,size=117,blksize=7680 }) = 0 (0x0)
> lstat("/etc/libmap.conf",{ mode=-rw-r--r-- ,inode=13724,size=109,blksize=4096 }) = 0 (0x0)
> openat(AT_FDCWD,"/etc/libmap.conf",O_RDONLY|O_CLOEXEC,00) = 3 (0x3)
> fstat(3,{ mode=-rw-r--r-- ,inode=13724,size=109,blksize=4096 }) = 0 (0x0)
> mmap(0x0,109,PROT_READ,MAP_PRIVATE,3,0x0) = 34366230528 (0x800631000)
> close(3) = 0 (0x0)
> lstat("/usr",{ mode=drwxr-xr-x ,inode=23,size=15,blksize=4096 }) = 0 (0x0)
> lstat("/usr/local",{ mode=drwxr-xr-x ,inode=214,size=14,blksize=4096 }) = 0 (0x0)
> lstat("/usr/local/etc",{ mode=drwxr-xr-x ,inode=32826,size=29,blksize=4096 }) = 0 (0x0)
> lstat("/usr/local/etc/libmap.d",0x7fffffffc608) ERR#2 'No such file or directory'
> munmap(0x800631000,109) = 0 (0x0)
> openat(AT_FDCWD,"/var/run/ld-elf.so.hints",O_RDONLY|O_CLOEXEC,00) = 3 (0x3)
> read(3,"Ehnt\^A\0\0\0\M^@\0\0\0f\0\0\0\0"...,128) = 128 (0x80)
> fstat(3,{ mode=-r--r--r-- ,inode=72757,size=230,blksize=4096 }) = 0 (0x0)
> lseek(3,0x80,SEEK_SET) = 128 (0x80)
> read(3,"/lib:/usr/lib:/usr/lib/compat:/u"...,102) = 102 (0x66)
> close(3) = 0 (0x0)
> access("/lib/libcam.so.7",F_OK) = 0 (0x0)
> openat(AT_FDCWD,"/lib/libcam.so.7",O_RDONLY|O_CLOEXEC|O_VERIFY,00) = 3 (0x3)
> fstat(3,{ mode=-r--r--r-- ,inode=141,size=201240,blksize=131072 }) = 0 (0x0)
> mmap(0x0,4096,PROT_READ,MAP_PRIVATE|MAP_PREFAULT_READ,3,0x0) = 34366230528 (0x800631000)
> mmap(0x0,2297856,PROT_NONE,MAP_PRIVATE|MAP_ANON|MAP_NOCORE,-1,0x0) = 34368299008 (0x80082a000)
> mmap(0x80082a000,176128,PROT_READ|PROT_EXEC,MAP_PRIVATE|MAP_FIXED|MAP_NOCORE|MAP_PREFAULT_READ,3,0x0) = 34368299008 (0x80082a000)
> mmap(0x800a54000,28672,PROT_READ|PROT_WRITE,MAP_PRIVATE|MAP_FIXED|MAP_PREFAULT_READ,3,0x2a000) = 34370568192 (0x800a54000)
> munmap(0x800631000,4096) = 0 (0x0)
> close(3) = 0 (0x0)
> access("/lib/libc.so.7",F_OK) = 0 (0x0)
> openat(AT_FDCWD,"/lib/libc.so.7",O_RDONLY|O_CLOEXEC|O_VERIFY,00) = 3 (0x3)
> fstat(3,{ mode=-r--r--r-- ,inode=168,size=1761320,blksize=131072 }) = 0 (0x0)
> mmap(0x0,4096,PROT_READ,MAP_PRIVATE|MAP_PREFAULT_READ,3,0x0) = 34366230528 (0x800631000)
> mmap(0x0,3899392,PROT_NONE,MAP_PRIVATE|MAP_ANON|MAP_NOCORE,-1,0x0) = 34370596864 (0x800a5b000)
> mmap(0x800a5b000,1646592,PROT_READ|PROT_EXEC,MAP_PRIVATE|MAP_FIXED|MAP_NOCORE|MAP_PREFAULT_READ,3,0x0) = 34370596864 (0x800a5b000)
> mmap(0x800ded000,49152,PROT_READ|PROT_WRITE,MAP_PRIVATE|MAP_FIXED|MAP_PREFAULT_READ,3,0x192000) = 34374340608 (0x800ded000)
> mmap(0x800df9000,106496,PROT_READ|PROT_WRITE,MAP_PRIVATE|MAP_FIXED|MAP_ANON,-1,0x0) = 34374389760 (0x800df9000)
> munmap(0x800631000,4096) = 0 (0x0)
> close(3) = 0 (0x0)
> access("/lib/libsbuf.so.6",F_OK) = 0 (0x0)
> openat(AT_FDCWD,"/lib/libsbuf.so.6",O_RDONLY|O_CLOEXEC|O_VERIFY,00) = 3 (0x3)
> fstat(3,{ mode=-r--r--r-- ,inode=137,size=11312,blksize=11776 }) = 0 (0x0)
> mmap(0x0,4096,PROT_READ,MAP_PRIVATE|MAP_PREFAULT_READ,3,0x0) = 34366230528 (0x800631000)
> mmap(0x0,2109440,PROT_NONE,MAP_PRIVATE|MAP_ANON|MAP_NOCORE,-1,0x0) = 34374496256 (0x800e13000)
> mmap(0x800e13000,12288,PROT_READ|PROT_EXEC,MAP_PRIVATE|MAP_FIXED|MAP_NOCORE|MAP_PREFAULT_READ,3,0x0) = 34374496256 (0x800e13000)
> mmap(0x801015000,4096,PROT_READ|PROT_WRITE,MAP_PRIVATE|MAP_FIXED|MAP_PREFAULT_READ,3,0x2000) = 34376601600 (0x801015000)
> munmap(0x800631000,4096) = 0 (0x0)
> close(3) = 0 (0x0)
> mmap(0x0,40960,PROT_READ|PROT_WRITE,MAP_PRIVATE|MAP_ANON,-1,0x0) = 34366230528 (0x800631000)
> munmap(0x800634000,28672) = 0 (0x0)
> mmap(0x0,102400,PROT_READ|PROT_WRITE,MAP_PRIVATE|MAP_ANON,-1,0x0) = 34366242816 (0x800634000)
> sysarch(AMD64_SET_FSBASE,0x7fffffffdfc8) = 0 (0x0)
> sigprocmask(SIG_BLOCK,{ SIGHUP|SIGINT|SIGQUIT|SIGKILL|SIGPIPE|SIGALRM|SIGTERM|SIGURG|SIGSTOP|SIGTSTP|SIGCONT|SIGCHLD|SIGTTIN|SIGTTOU|SIGIO|SIGXCPU|SIGXFSZ|SIGVTALRM|SIGPROF|SIGWINCH|SIGINFO|SIGUSR1|SIGUSR2 },{ }) = 0 (0x0)
> sigprocmask(SIG_SETMASK,{ },0x0) = 0 (0x0)
> readlink("/etc/malloc.conf",0x7fffffffd6c0,1024) ERR#2 'No such file or directory'
> issetugid() = 0 (0x0)
> __sysctl(0x7fffffffd560,0x2,0x7fffffffd5b0,0x7fffffffd5a8,0x800bbcc93,0xd) = 0 (0x0)
> __sysctl(0x7fffffffd5b0,0x2,0x7fffffffd674,0x7fffffffd668,0x0,0x0) = 0 (0x0)
> mmap(0x0,2097152,PROT_READ|PROT_WRITE,MAP_PRIVATE|MAP_ANON,-1,0x0) = 34376605696 (0x801016000)
> munmap(0x801016000,2097152) = 0 (0x0)
> mmap(0x0,4190208,PROT_READ|PROT_WRITE,MAP_PRIVATE|MAP_ANON,-1,0x0) = 34376605696 (0x801016000)
> munmap(0x801016000,2007040) = 0 (0x0)
> munmap(0x801400000,86016) = 0 (0x0)
> sigprocmask(SIG_BLOCK,{ SIGHUP|SIGINT|SIGQUIT|SIGKILL|SIGPIPE|SIGALRM|SIGTERM|SIGURG|SIGSTOP|SIGTSTP|SIGCONT|SIGCHLD|SIGTTIN|SIGTTOU|SIGIO|SIGXCPU|SIGXFSZ|SIGVTALRM|SIGPROF|SIGWINCH|SIGINFO|SIGUSR1|SIGUSR2 },{ }) = 0 (0x0)
> sigprocmask(SIG_SETMASK,{ },0x0) = 0 (0x0)
> sigprocmask(SIG_BLOCK,{ SIGHUP|SIGINT|SIGQUIT|SIGKILL|SIGPIPE|SIGALRM|SIGTERM|SIGURG|SIGSTOP|SIGTSTP|SIGCONT|SIGCHLD|SIGTTIN|SIGTTOU|SIGIO|SIGXCPU|SIGXFSZ|SIGVTALRM|SIGPROF|SIGWINCH|SIGINFO|SIGUSR1|SIGUSR2 },{ }) = 0 (0x0)
> sigprocmask(SIG_SETMASK,{ },0x0) = 0 (0x0)
> sigprocmask(SIG_BLOCK,{ SIGHUP|SIGINT|SIGQUIT|SIGKILL|SIGPIPE|SIGALRM|SIGTERM|SIGURG|SIGSTOP|SIGTSTP|SIGCONT|SIGCHLD|SIGTTIN|SIGTTOU|SIGIO|SIGXCPU|SIGXFSZ|SIGVTALRM|SIGPROF|SIGWINCH|SIGINFO|SIGUSR1|SIGUSR2 },{ }) = 0 (0x0)
> sigprocmask(SIG_SETMASK,{ },0x0) = 0 (0x0)
> sigprocmask(SIG_BLOCK,{ SIGHUP|SIGINT|SIGQUIT|SIGKILL|SIGPIPE|SIGALRM|SIGTERM|SIGURG|SIGSTOP|SIGTSTP|SIGCONT|SIGCHLD|SIGTTIN|SIGTTOU|SIGIO|SIGXCPU|SIGXFSZ|SIGVTALRM|SIGPROF|SIGWINCH|SIGINFO|SIGUSR1|SIGUSR2 },{ }) = 0 (0x0)
> sigprocmask(SIG_SETMASK,{ },0x0) = 0 (0x0)
> mmap(0x0,2097152,PROT_READ|PROT_WRITE,MAP_PRIVATE|MAP_ANON,-1,0x0) = 34380709888 (0x801400000)
> openat(AT_FDCWD,"/dev/pass7",O_RDWR|O_EXCL,00) ERR#13 'Permission denied'
> stat("/usr/share/nls/C/libc.cat",0x7fffffffdf68) ERR#2 'No such file or directory'
> stat("/usr/share/nls/libc/C",0x7fffffffdf68) ERR#2 'No such file or directory'
> stat("/usr/local/share/nls/C/libc.cat",0x7fffffffdf68) ERR#2 'No such file or directory'
> stat("/usr/local/share/nls/libc/C",0x7fffffffdf68) ERR#2 'No such file or directory'
> cannot open SCSI device '/dev/pass7' - Permission denied
> write(2,"cannot open SCSI device '/dev/pa"...,57) = 57 (0x39)
> sigprocmask(SIG_BLOCK,{ SIGHUP|SIGINT|SIGQUIT|SIGKILL|SIGPIPE|SIGALRM|SIGTERM|SIGURG|SIGSTOP|SIGTSTP|SIGCONT|SIGCHLD|SIGTTIN|SIGTTOU|SIGIO|SIGXCPU|SIGXFSZ|SIGVTALRM|SIGPROF|SIGWINCH|SIGINFO|SIGUSR1|SIGUSR2 },{ }) = 0 (0x0)
> sigprocmask(SIG_SETMASK,{ },0x0) = 0 (0x0)
> sigprocmask(SIG_BLOCK,{ SIGHUP|SIGINT|SIGQUIT|SIGKILL|SIGPIPE|SIGALRM|SIGTERM|SIGURG|SIGSTOP|SIGTSTP|SIGCONT|SIGCHLD|SIGTTIN|SIGTTOU|SIGIO|SIGXCPU|SIGXFSZ|SIGVTALRM|SIGPROF|SIGWINCH|SIGINFO|SIGUSR1|SIGUSR2 },{ }) = 0 (0x0)
> sigprocmask(SIG_SETMASK,{ },0x0) = 0 (0x0)
> sigprocmask(SIG_BLOCK,{ SIGHUP|SIGINT|SIGQUIT|SIGKILL|SIGPIPE|SIGALRM|SIGTERM|SIGURG|SIGSTOP|SIGTSTP|SIGCONT|SIGCHLD|SIGTTIN|SIGTTOU|SIGIO|SIGXCPU|SIGXFSZ|SIGVTALRM|SIGPROF|SIGWINCH|SIGINFO|SIGUSR1|SIGUSR2 },{ }) = 0 (0x0)
> sigprocmask(SIG_SETMASK,{ },0x0) = 0 (0x0)
> sigprocmask(SIG_BLOCK,{ SIGHUP|SIGINT|SIGQUIT|SIGKILL|SIGPIPE|SIGALRM|SIGTERM|SIGURG|SIGSTOP|SIGTSTP|SIGCONT|SIGCHLD|SIGTTIN|SIGTTOU|SIGIO|SIGXCPU|SIGXFSZ|SIGVTALRM|SIGPROF|SIGWINCH|SIGINFO|SIGUSR1|SIGUSR2 },{ }) = 0 (0x0)
> sigprocmask(SIG_SETMASK,{ },0x0) = 0 (0x0)
> sigprocmask(SIG_BLOCK,{ SIGHUP|SIGINT|SIGQUIT|SIGKILL|SIGPIPE|SIGALRM|SIGTERM|SIGURG|SIGSTOP|SIGTSTP|SIGCONT|SIGCHLD|SIGTTIN|SIGTTOU|SIGIO|SIGXCPU|SIGXFSZ|SIGVTALRM|SIGPROF|SIGWINCH|SIGINFO|SIGUSR1|SIGUSR2 },{ }) = 0 (0x0)
> sigprocmask(SIG_SETMASK,{ },0x0) = 0 (0x0)
> exit(0x1)
> process exit, rval = 1
>
> --
> Dan Langille - BSDCan / PGCon
> dan at langille.org
More information about the freebsd-scsi
mailing list