[RFC] CAM pass(4) patch for NVMe

[Warner Losh]

On Tue, Apr 4, 2017 at 8:30 AM, Chuck Tuffli <chuck at tuffli.net> wrote:
> Hi
>
> I posted a patch on Phabricator[1] which adds IO pass-through support
> for NVMe and would like some feedback on it. The bulk of the change is
> pretty straight forward, but there was one part I'm not sure is the
> best approach. The driver needs to know what type of command the
> application is submitting in order to place it on the correct type of
> NVMe queue. The patch uses bit 5 (i.e. 0x10) in the xflags variable of
> the ccb header for this purpose. xflags was convenient to use, but
> since other drivers don't use it, my guess is this is "the wrong way".
> If it is OK to use xflags for this, cool, otherwise I'm open to
> suggestions.

Yea, one of the comments I posted to review... At the very least, it
needs nvmecontrol uses different devices to distinguish between the
different queues. I find this somewhat unsatisfying, but it works.
nda, however, doesn't publish a transport level or sim level device
that one could easily latch on to. The issue becomes one of security:
If I can open nda0/pass0, can I control namespace operations for the
drive? Download new firmware? etc. However, you can do all these
things with other classes of devices today, so maybe that's not the
biggest issue.

> As background, NVMe has two categories of commands: administrative and
> NVM (sometimes referred to as "IO"). I don't think it is possible for
> the driver to guess the command category based on the cmd bytes as:
>  - the command opcode values alias. E.g. Flush (NVM) and Delete
> Submission queue (Admin) use opcode 0x0
>  - both categories have commands which use a non-zero Namespace ID
> (like a LUN). so filtering on NSID wouldn't work

In theory, you could use 0xffff as the NSID, since that's not a valid NSID.

The current support of name spaces is a bit weak in nvme/nvd too. And
it's even weaker in nda since I didn't have a multi-namespace drive
until lately.

So what are your goals with this work? I'm aware of another effort to
improve the name space support in nvmecontrol which isn't going
through nda. I'm also working on getting the nvmecontrol functionality
moved over to camcontrol.

Warner