mpr(4) SAS3008 Repeated Crashing

[Steven Hartland]

On 03/03/2016 10:26, Borja Marcos wrote:
>> On 03 Mar 2016, at 10:38, Steven Hartland <killing at multiplay.co.uk> wrote:
>>
>> We've seen HW issues before where the first thing to start triggering the problem was TRIM requests, it seems like its an afterthought in most FW's unfortunately, so one of the first things to go bad. I'm not saying this is you issue, but its something to keep in mind.
> Thanks :)
>
> Not trim related, it seems. I’ve ran the tests with kern.cam.X.delete_method set to DISABLE and I still see errors:
>
> In paranormal cases like this it would be awesome to have access to a logic analyzer… I keep dreaming of course :)
>
>
>
> Mar  3 11:12:53 clientes-ssd8 kernel: (noperiph:mpr0:0:4294967295:0): SMID 2 Aborting command 0xfffffe0000c7cab0
> Mar  3 11:12:54 clientes-ssd8 kernel: (da2:mpr0:0:26:0): READ(10). CDB: 28 00 26 d7 d0 98 00 00 20 00 length 16384 SMID 322 terminated ioc 804b scsi 0 state c xfer 0
> Mar  3 11:12:54 clientes-ssd8 kernel: (da2:mpr0:0:26:0): READ(10). CDB: 28 00 26 d7 d0 b8 00 00 18 00 length 12288 SMID 217 terminated ioc 804b scsi 0 state c xfer 0
> Mar  3 11:12:54 clientes-ssd8 kernel: (da2:mpr0:0:26:0): SYNCHRONIZE CACHE(10). CDB: 35 00 00 00 00 00 00 00 00 00 length 0 SMID 205 terminated ioc 804b scsi 0 sta(da2:mpr0:0:26:0): READ(10). CDB: 28 00 26 d7 d0 18 00 00 78 00
> Mar  3 11:12:54 clientes-ssd8 kernel: te c xfer 0
> Mar  3 11:12:54 clientes-ssd8 kernel: (da2:mpr0:0:26:0): CAM status: Command timeout
> Mar  3 11:12:54 clientes-ssd8 kernel: (da2:mpr0:0:26:0): Retrying command
> Mar  3 11:12:54 clientes-ssd8 kernel: (da2:mpr0:0:26:0): SYNCHRONIZE CACHE(10). CDB: 35 00 00 00 00 00 00 00 00 00
> Mar  3 11:12:54 clientes-ssd8 kernel: (da2:mpr0:0:26:0): CAM status: SCSI Status Error
> Mar  3 11:12:54 clientes-ssd8 kernel: (da2:mpr0:0:26:0): SCSI status: Check Condition
> Mar  3 11:12:54 clientes-ssd8 kernel: (da2:mpr0:0:26:0): SCSI sense: UNIT ATTENTION asc:29,0 (Power on, reset, or bus device reset occurred)
> Mar  3 11:12:54 clientes-ssd8 kernel: (da2:mpr0:0:26:0): Retrying command (per sense data)
>
Have you tried mrsas instead of mpr?
You can do so by adding the following to /boot/loader.conf:
hw.mfi.mrsas_enable="1"

     Regards
     Steve