mfi(4) driver | FreeBSD 8 | Dell PERC H730

[Sibananda Sahu]

Yes MegaCli and StorCli from LSI works with mrsas(4).

There were plans to include mfiutil(8) support for mrsas(4) but may be
later it will be merged.
On Sep 25, 2015 4:30 AM, "Pallav Bose" <pallav_bose at yahoo.com> wrote:

> Hi Sibananda,
>
> Thank you for the pointer. I was able to compile mrsas(4) for FreeBSD 8.0.
> Can you please tell me whether MegaCli can be used with the mrsas(4)
> driver? I have been mfiutil(8) and MegaCli so far along with the mfi(4)
> driver. Obviously mfiutil(8) cannot be used with mrsas(4).
>
> Thanks,
> Pallav
>
>
>
>
>
> On Tuesday, September 22, 2015 2:06 AM, Sibananda Sahu <
> sibananda.sahu at avagotech.com> wrote:
>
>
> I think you can check the mrsas(4) for the same.
>
> See here for the man page and supported controllers:
> https://www.freebsd.org/cgi/man.cgi?query=mrsas&sektion=4
>
> You can check LSI's (Avago) website for the latest available driver:
> http://www.avagotech.com/products/server-storage/raid-controllers/megaraid
> -sas-9380-8e#downloads
>
> Go to the Driver section and find out the latest FreeBSD driver available.
> Download and compile the code for FreeBSD 8.x.
>
> Thanks
> Sibananda Sahu
>
>
> -----Original Message-----
> From: owner-freebsd-scsi at freebsd.org
> [mailto:owner-freebsd-scsi at freebsd.org] On Behalf Of Pallav Bose via
> freebsd-scsi
> Sent: Wednesday, September 16, 2015 4:46 AM
> To: freebsd-scsi at freebsd.org
> Subject: mfi(4) driver | FreeBSD 8 | Dell PERC H730
>
> Hi,
> Is there a port of the mfi(4) driver for FreeBSD 8.x to support Dell's
> PowerEdge RAID Controller H730? It is built on the LSI SAS 3108 chip.
>
> Thanks,Pallav
>
> _______________________________________________
> freebsd-scsi at freebsd.org mailing list
> https://lists.freebsd.org/mailman/listinfo/freebsd-scsi
> To unsubscribe, send any mail to "freebsd-scsi-unsubscribe at freebsd.org
> "
>
>
>