mps driver on 10.2-BETA

[Konstantin Kulikov]

Just tested lsi 9201-16i 20.00.04.00 with 10.2-RELEASE.
Looks good here as well.

On Thu, Aug 27, 2015 at 11:12 PM Graham Allan <allan at physics.umn.edu> wrote:

> On 8/27/2015 9:32 AM, Graham Allan wrote:
> >
> > I have another system which isn't in production yet - I can do the same
> > test on that and see if the newer 20.00.00.04 is stable. This is also
> > running 9.3 but the test should still be valid. I will be using this
> > system for 10.2 testing, but would like to keep it on 9.3 for a short
> > time to try and resolve any issues with that.
>
> I updated the firmware on this HBA to 20.00.04.00 and ran some stress
> tests - all looks fine after 4+ hours. I'm pretty certain that issues
> showed up long before that with 20.00.00.00 (ideally I'd like to retest
> that, but I don't have a stashed copy of that firmware).
>
> To reiterate, this is with FreeBSD 9.3, and in this particular case the
> HBA is a 9205-8e.
>
> I expect I'll get to re-test within the next few weeks with FreeBSD
> 10.2. But for now it seems like firmware 20.00.04.00 has the previous
> problems fixed.
>
> Graham
> _______________________________________________
> freebsd-scsi at freebsd.org mailing list
> https://lists.freebsd.org/mailman/listinfo/freebsd-scsi
> To unsubscribe, send any mail to "freebsd-scsi-unsubscribe at freebsd.org"
>