ses/pass devices (enclosure/processor devices) not all showing up?

[John De Boskey]

Hi Folks -

   I have a shelf with 84 sata drives. All drives show up
correctly and are accessible. The shelf appears to have
multiple processor devices and one enclosure device internally.
For instance:

# camcontrol devlist | grep XYRATEX
<XYRATEX DEFAULT-SD-R24 3034>      at scbus7 target 159 lun 0 (pass18)
<XYRATEX DEFAULT-SD-R36 3034>      at scbus7 target 188 lun 0 (pass47)
<XYRATEX DEFAULT-SD-R36 3034>      at scbus7 target 217 lun 0 (pass76)
<XYRATEX DEFAULT-SD-R24 3034>      at scbus7 target 232 lun 0 (pass91)

# camcontrol devlist | grep ses
<DELL SC280-01-E6EBD 3034>         at scbus7 target 144 lun 0 (ses0,pass3)

# camcontrol smprg pass18 | grep 'Number of Phys:'
Number of Phys: 25
# camcontrol smprg pass47 | grep 'Number of Phys:'
Number of Phys: 37
# camcontrol smprg pass76 | grep 'Number of Phys:'
Number of Phys: 37
# camcontrol smprg pass91 | grep 'Number of Phys:'
Number of Phys: 25
# camcontrol smprg ses0 | grep 'Number of Phys:'
Number of Phys: 37

# camcontrol smpphylist pass18
25 PHYs:
PHY  Attached SAS Address
  0  0x5000c500585f4b52   <SEAGATE ST4000NM0023 GE09>       (pass4,da0)
  1  0x5000c500585f4476   <SEAGATE ST4000NM0023 GE09>       (pass5,da1)
  2  0x5000c500585f6efe   <SEAGATE ST4000NM0023 GE09>       (pass6,da2)
  3  0x5000c500585f14d6   <SEAGATE ST4000NM0023 GE09>       (pass7,da3)
  4  0x5000c500585f683e   <SEAGATE ST4000NM0023 GE09>       (pass8,da4)
  5  0x5000c500585f15e6   <SEAGATE ST4000NM0023 GE09>       (pass9,da5)
  6  0x5000c500585f49ba   <SEAGATE ST4000NM0023 GE09>       (pass10,da6)
  7  0x5000c500585f14ea   <SEAGATE ST4000NM0023 GE09>       (pass11,da7)
  8  0x5000c500585f5ec6   <SEAGATE ST4000NM0023 GE09>       (pass12,da8)
  9  0x5000c500585f0d12   <SEAGATE ST4000NM0023 GE09>       (pass13,da9)
 10  0x5000c500585f620a   <SEAGATE ST4000NM0023 GE09>       (pass14,da10)
 11  0x5000c500585f0d1e   <SEAGATE ST4000NM0023 GE09>       (pass15,da11)
 12  0x5000c500585f64ae   <SEAGATE ST4000NM0023 GE09>       (pass16,da12)
 13  0x5000c500585f27aa   <SEAGATE ST4000NM0023 GE09>       (pass17,da13)
 14  0x0000000000000000
 15  0x0000000000000000
 16  0x0000000000000000
 17  0x0000000000000000
 18  0x0000000000000000
 19  0x0000000000000000
 20  0x50050cc1177513bf
 21  0x50050cc1177513bf
 22  0x50050cc1177513bf
 23  0x50050cc1177513bf
 24  0x50050cc10d2fe7be


(sas2ircu processor devices)

# camcontrol smpphylist pass18 -q | wc -l
      14
# camcontrol smpphylist pass47 -q | wc -l
      28
# camcontrol smpphylist pass76 -q | wc -l
      28
# camcontrol smpphylist pass91 -q | wc -l
      14

Which adds up to the 84 expected drives. No devices show up under ses0:

(sas2ircu enclosure services device)

# camcontrol smpphylist ses0 -q | wc -l
       0

I don't know that I understand the hierarchy of the backplane attachments.
Should the 4 pass only processor devices actually be ses devices? Or should
they be linked up under ses0 and all the devices show up under ses0?

Any thoughts or ideas on how to fix this up(debug) would be appreciated.

I have linked dmesg, camcontrol devlist, and sas2ircu output below:

http://people.freebsd.org/~jwd/sespass/dmesg.txt   mps messaging enabled.

http://people.freebsd.org/~jwd/sespass/devlist.txt

http://people.freebsd.org/~jwd/sespass/sas2ircu.txt

Thanks,
John