mfi(4) driver | FreeBSD 8 | Dell PERC H730

[Pallav Bose]

Hi Sibananda,
I tried using StorCli to query the RAID controller, but it could not recognize it. 

MegaCli output:
# MegaCli -adpcount


Controller Count: 1.

Exit Code: 0x01
# MegaCli -adpallinfo -aall

Adapter #0

==============================================================================
                    Versions
                ================
Product Name    : PERC H730 Mini
Serial No       : 53D00I2
FW Package Build: 25.3.0.0016

                    Mfg. Data
                ================
Mfg. Date       : 03/18/15
Rework Date     : 03/18/15
Revision No     : A01
Battery FRU     : N/A

                Image Versions in Flash:
                ================
BIOS Version       : 6.23.03.0_4.16.07.00_0x060C0200
Ctrl-R Version     : 5.04-0012
FW Version         : 4.250.00-4402
NVDATA Version     : 3.1411.00-0019
Boot Block Version : 3.02.00.00-0001
<remaining output snipped>
StorCli output:
# id
uid=0(root) gid=0(wheel) groups=0(wheel)
# storcli show all
Status Code = 0
Status = Success
Description = None

Number of Controllers = 0
Host Name = test.
Operating System  = FreeBSD8.0-RELEASE
# storcli /c0 show all
Controller = 0
Status = Failure
Description = Controller 0 not found

Using storcli64:
# storcli64 show all
Status Code = 0
Status = Success
Description = None

Number of Controllers = 0
Host Name = test.
Operating System  = FreeBSD8.0-RELEASE

panzura# storcli64 /c0 show all
Controller = 0
Status = Failure
Description = Controller 0 not found

Can you help me debug this issue? Thanks!
Regards,
Pallav 


     On Thursday, September 24, 2015 6:08 PM, Sibananda Sahu <sibananda.sahu at avagotech.com> wrote:
   

 Yes MegaCli and StorCli from LSI works with mrsas(4).There were plans to include mfiutil(8) support for mrsas(4) but may be later it will be merged.On Sep 25, 2015 4:30 AM, "Pallav Bose" <pallav_bose at yahoo.com> wrote:

Hi Sibananda,
Thank you for the pointer. I was able to compile mrsas(4) for FreeBSD 8.0. Can you please tell me whether MegaCli can be used with the mrsas(4) driver? I have been mfiutil(8) and MegaCli so far along with the mfi(4) driver. Obviously mfiutil(8) cannot be used with mrsas(4).
 Thanks,Pallav 


   

  On Tuesday, September 22, 2015 2:06 AM, Sibananda Sahu <sibananda.sahu at avagotech.com> wrote:
   

 I think you can check the mrsas(4) for the same.

See here for the man page and supported controllers:
https://www.freebsd.org/cgi/man.cgi?query=mrsas&sektion=4

You can check LSI's (Avago) website for the latest available driver:
http://www.avagotech.com/products/server-storage/raid-controllers/megaraid
-sas-9380-8e#downloads

Go to the Driver section and find out the latest FreeBSD driver available.
Download and compile the code for FreeBSD 8.x.

Thanks
Sibananda Sahu


-----Original Message-----
From: owner-freebsd-scsi at freebsd.org
[mailto:owner-freebsd-scsi at freebsd.org] On Behalf Of Pallav Bose via
freebsd-scsi
Sent: Wednesday, September 16, 2015 4:46 AM
To: freebsd-scsi at freebsd.org
Subject: mfi(4) driver | FreeBSD 8 | Dell PERC H730

Hi,
Is there a port of the mfi(4) driver for FreeBSD 8.x to support Dell's
PowerEdge RAID Controller H730? It is built on the LSI SAS 3108 chip.

Thanks,Pallav
_______________________________________________
freebsd-scsi at freebsd.org mailing list
https://lists.freebsd.org/mailman/listinfo/freebsd-scsi
To unsubscribe, send any mail to "freebsd-scsi-unsubscribe at freebsd.org"