/dev/ses<x> not created
Michael Jung
mikej at mikej.com
Thu May 28 14:05:29 UTC 2015
Excuse my errant statement about 'mpt0' not identified in dmesg. I did
not release the kern.msgbufsize was not large enough. full dmesg
updated
https://charon.gopai.com/dmesg.
Thank you.
On 2015-05-28 09:45, Michael Jung wrote:
> I hoping to get some direction as I simply am unsure what to do next.
>
> I have three LSI 9200-8e adapters connected to a Super Micro
> CSE-846A-R1200B
> yet no SES devices get created. The Backplane in the chassis
> BPN-SAS_846A
> does not have a expander. So I have six SFF-8088 on the backplane that
> connect
> directly to the ports on the 9200-8e albeit externally.The backplane
> does have
> a Marvel MG9072 supporting SES-2 and is jumpered for SGPIO.
>
> The server in question is running 9.3, but I have tested with
> 10.1-STABLE and
> 11-Current live CD's and I do not see /dev/ses<x> created. I have also
> booted
> for testing openIndiana and do not see /dev/es/ses<x> created. I
> have an open ticket with SM but that so far has them asking a lot of
> questions
> and giving no direction.
>
> On the LSI cards I have tested P16, P17 and P19 all in IT mode on 9.3.
> sas2icru on each of the adpapters does return output such as
>
> Enclosure information
> ------------------------------------------------------------------------
> Enclosure# : 1
> Logical ID : 500605b0:065e26b0
> Numslots : 8
> StartSlot : 0
> ------------------------------------------------------------------------
>
> What stands out is <LSI SAS2008> is not identefied for 'mps0' in dmesg.
> However,
> drives attached to all controllers do work fine and are identified.
>
> Full dmesg and output of sas2icru for each controller
> https://charon.gopai.com/dmesg
>
> Booting 9.3 verbosely with hw.mps.debug_level=0xd in /boot/loader.conf
> yeilds:
>
> mps1: <LSI SAS2008> port 0xcc00-0xccff mem
> 0xde8bc000-0xde8bffff,0xde8c0000-0xde8fffff irq 35 at device 0.0 on
> pci19
> mps1: Firmware: 16.00.00.00, Driver: 16.00.00.00-fbsd
> mps1: IOCCapabilities:
> 1285c<ScsiTaskFull,DiagTrace,SnapBuf,EEDP,TransRetry,EventReplay,HostDisc>
> mps1: EventReply :
> mps1: EventReply :
> mps1: attempting to allocate 1 MSI-X vectors (15 supported)
> mps1: using IRQ 272 for MSI-X
> mps2: <LSI SAS2008> port 0xdc00-0xdcff mem
> 0xdeabc000-0xdeabffff,0xdeac0000-0xdeafffff irq 33 at device 0.0 on
> pci18
> mps2: Firmware: 16.00.00.00, Driver: 16.00.00.00-fbsd
> mps2: IOCCapabilities:
> 1285c<ScsiTaskFull,DiagTrace,SnapBuf,EEDP,TransRetry,EventReplay,HostDisc>
> mps2: EventReply :
> mps2: EventReply :
> mps2: attempting to allocate 1 MSI-X vectors (15 supported)
> mps2: using IRQ 273 for MSI-X
> mps0: EventReply :
> mps0: EventReply :
> mps0: EventReply :
> mps0: EventReply :
> mps0: EventReply :
> mps0: EventReply :
> mps0: EventReply :
> mps0: EventReply :
> mps0: EventReply :
> mps0: EventReply :
> mps0: EventReply :
> mps0: EventReply :
> mps0: EventReply :
> mps0: EventReply :
> mps1: EventReply :
> mps1: EventReply :
> mps1: EventReply :
> mps1: EventReply :
> mps1: EventReply :
> mps1: EventReply :
> mps1: EventReply :
> mps1: EventReply :
> mps1: EventReply :
> mps1: EventReply :
> mps1: EventReply :
> mps1: EventReply :
> mps2: EventReply :
> mps2: EventReply :
> mps2: EventReply :
> mps2: EventReply :
> mps2: EventReply :
> mps2: EventReply :
> mps2: EventReply :
> mps2: EventReply :
> mps2: EventReply :
> mps2: EventReply :
> mps2: EventReply :
> mps2: EventReply :
> mps2: EventReply :
> mps2: EventReply :
> mps0: (0)->(mpssas_fw_work) Working on Event: [16]
> mps0: (1)->(mpssas_fw_work) Event Free: [16]
> mps0: (1)->(mpssas_fw_work) Working on Event: [1d]
> mps0: (2)->(mpssas_fw_work) Event Free: [1d]
> mps0: (2)->(mpssas_fw_work) Working on Event: [1c]
> mps1: (3)->(mpssas_fw_work) Working on Event: [16]
> mps1: (4)->(mpssas_fw_work) Event Free: [16]
> mps1: (4)->(mpssas_fw_work) Working on Event: [1d]
> mps1: (5)->(mpssas_fw_work) Event Free: [1d]
> mps1: (5)->(mpssas_fw_work) Working on Event: [1c]
> mps2: (6)->(mpssas_fw_work) Working on Event: [16]
> mps2: (7)->(mpssas_fw_work) Event Free: [16]
> mps2: (7)->(mpssas_fw_work) Working on Event: [1d]
> mps2: (8)->(mpssas_fw_work) Event Free: [1d]
> mps2: (8)->(mpssas_fw_work) Working on Event: [1c]
> (probe0:mps1:0:0:0): Down reving Protocol Version from 4 to 0?
> (probe1:mps1:0:1:0): Down reving Protocol Version from 4 to 0?
> (probe2:mps1:0:2:0): Down reving Protocol Version from 4 to 0?
> (probe3:mps1:0:4:0): Down reving Protocol Version from 4 to 0?
> (probe4:mps2:0:0:0): Down reving Protocol Version from 4 to 0?
> (probe5:mps2:0:1:0): Down reving Protocol Version from 4 to 0?
> mps1: (9)->(mpssas_fw_work) Event Free: [1c]
> mps1: (9)->(mpssas_fw_work) Working on Event: [16]
> mps1: (10)->(mpssas_fw_work) Event Free: [16]
> mps1: (10)->(mpssas_fw_work) Working on Event: [16]
> mps1: (11)->(mpssas_fw_work) Event Free: [16]
> mps1: (11)->(mpssas_fw_work) Working on Event: [16]
> mps1: (12)->(mpssas_fw_work) Event Free: [16]
> mps1: (12)->(mpssas_fw_work) Working on Event: [16]
> mps1: (13)->(mpssas_fw_work) Event Free: [16]
> mps1: (13)->(mpssas_fw_work) Working on Event: [16]
> mps1: (14)->(mpssas_fw_work) Event Free: [16]
> mps1: (14)->(mpssas_fw_work) Working on Event: [16]
> mps1: (15)->(mpssas_fw_work) Event Free: [16]
> mps1: (15)->(mpssas_fw_work) Working on Event: [16]
> mps1: (16)->(mpssas_fw_work) Event Free: [16]
> mps1: (16)->(mpssas_fw_work) Working on Event: [16]
> mps1: (17)->(mpssas_fw_work) Event Free: [16]
> mps1: (17)->(mpssas_fw_work) Working on Event: [16]
> mps1: (18)->(mpssas_fw_work) Event Free: [16]
> (probe6:mps1:0:5:0): Down reving Protocol Version from 4 to 0?
> (probe7:mps2:0:2:0): Down reving Protocol Version from 4 to 0?
> (probe8:mps2:0:6:0): Down reving Protocol Version from 4 to 0?
> (probe9:mps2:0:4:0): Down reving Protocol Version from 4 to 0?
> mps2: (18)->(mpssas_fw_work) Event Free: [1c]
> mps2: (18)->(mpssas_fw_work) Working on Event: [16]
> mps2: (19)->(mpssas_fw_work) Event Free: [16]
> mps2: (19)->(mpssas_fw_work) Working on Event: [16]
> mps2: (20)->(mpssas_fw_work) Event Free: [16]
> mps2: (20)->(mpssas_fw_work) Working on Event: [16]
> mps2: (21)->(mpssas_fw_work) Event Free: [16]
> mps2: (21)->(mpssas_fw_work) Working on Event: [16]
> mps2: (22)->(mpssas_fw_work) Event Free: [16]
> mps2: (22)->(mpssas_fw_work) Working on Event: [16]
> mps2: (23)->(mpssas_fw_work) Event Free: [16]
> mps2: (23)->(mpssas_fw_work) Working on Event: [16]
> mps2: (24)->(mpssas_fw_work) Event Free: [16]
> mps2: (24)->(mpssas_fw_work) Working on Event: [16]
> mps2: (25)->(mpssas_fw_work) Event Free: [16]
> mps2: (25)->(mpssas_fw_work) Working on Event: [16]
> mps2: (26)->(mpssas_fw_work) Event Free: [16]
> mps2: (26)->(mpssas_fw_work) Working on Event: [16]
> mps2: (27)->(mpssas_fw_work) Event Free: [16]
> mps2: (27)->(mpssas_fw_work) Working on Event: [16]
> mps2: (28)->(mpssas_fw_work) Event Free: [16]
> mps2: (28)->(mpssas_fw_work) Working on Event: [16]
> mps2: (29)->(mpssas_fw_work) Event Free: [16]
> (probe0:mps2:0:5:0): Down reving Protocol Version from 4 to 0?
> (probe1:mps0:0:0:0): Down reving Protocol Version from 4 to 0?
> (probe2:mps0:0:1:0): Down reving Protocol Version from 4 to 0?
> (probe3:mps0:0:2:0): Down reving Protocol Version from 4 to 0?
> (probe5:mps0:0:3:0): Down reving Protocol Version from 4 to 0?
> (probe6:mps0:0:4:0): Down reving Protocol Version from 4 to 0?
> mps0: (29)->(mpssas_fw_work) Event Free: [1c]
> mps0: (29)->(mpssas_fw_work) Working on Event: [16]
> mps0: (30)->(mpssas_fw_work) Event Free: [16]
> mps0: (30)->(mpssas_fw_work) Working on Event: [16]
> mps0: (31)->(mpssas_fw_work) Event Free: [16]
> mps0: (31)->(mpssas_fw_work) Working on Event: [16]
> mps0: (32)->(mpssas_fw_work) Event Free: [16]
> mps0: (32)->(mpssas_fw_work) Working on Event: [16]
> mps0: (33)->(mpssas_fw_work) Event Free: [16]
> mps0: (33)->(mpssas_fw_work) Working on Event: [16]
> mps0: (34)->(mpssas_fw_work) Event Free: [16]
> mps0: (34)->(mpssas_fw_work) Working on Event: [16]
> mps0: (35)->(mpssas_fw_work) Event Free: [16]
> mps0: (35)->(mpssas_fw_work) Working on Event: [16]
> mps0: (36)->(mpssas_fw_work) Event Free: [16]
> mps0: (36)->(mpssas_fw_work) Working on Event: [16]
> mps0: (37)->(mpssas_fw_work) Event Free: [16]
> mps0: (37)->(mpssas_fw_work) Working on Event: [16]
> mps0: (38)->(mpssas_fw_work) Event Free: [16]
> mps0: (38)->(mpssas_fw_work) Working on Event: [16]
> mps0: (39)->(mpssas_fw_work) Event Free: [16]
> mps0: (39)->(mpssas_fw_work) Working on Event: [16]
> mps0: (40)->(mpssas_fw_work) Event Free: [16]
> (probe0:mps0:0:6:0): Down reving Protocol Version from 4 to 0?
> da10 at mps0 bus 0 scbus0 target 0 lun 0
> da0 at mps0 bus 0 scbus0 target 2 lun 0
> da1 at mps0 bus 0 scbus0 target 3 lun 0
> da11 at mps0 bus 0 scbus0 target 1 lun 0
> da2 at mps0 bus 0 scbus0 target 4 lun 0
> da18 at mps1 bus 0 scbus1 target 0 lun 0
> da19 at mps1 bus 0 scbus1 target 1 lun 0
> da20 at mps1 bus 0 scbus1 target 2 lun 0
> da23 at mps1 bus 0 scbus1 target 5 lun 0
> da14 at mps2 bus 0 scbus2 target 0 lun 0
> da15 at mps2 bus 0 scbus2 target 1 lun 0
> da16 at mps2 bus 0 scbus2 target 2 lun 0
> da22 at mps1 bus 0 scbus1 target 4 lun 0
> da6 at mps2 bus 0 scbus2 target 4 lun 0
> pass0 at mps0 bus 0 scbus0 target 0 lun 0
> da8 at mps2 bus 0 scbus2 target 6 lun 0
> pass1 at mps0 bus 0 scbus0 target 1 lun 0
> pass2 at mps0 bus 0 scbus0 target 2 lun 0
> pass3 at mps0 bus 0 scbus0 target 3 lun 0
> pass4 at mps0 bus 0 scbus0 target 4 lun 0
> pass5 at mps0 bus 0 scbus0 target 6 lun 0
> pass6 at mps1 bus 0 scbus1 target 0 lun 0
> pass7 at mps1 bus 0 scbus1 target 1 lun 0
> da7 at mps2 bus 0 scbus2 target 5 lun 0
> pass8 at mps1 bus 0 scbus1 target 2 lun 0
> pass9 at mps1 bus 0 scbus1 target 4 lun 0
> pass10 at mps1 bus 0 scbus1 target 5 lun 0
> pass11 at mps2 bus 0 scbus2 target 0 lun 0
> pass12 at mps2 bus 0 scbus2 target 1 lun 0
> pass13 at mps2 bus 0 scbus2 target 2 lun 0
> pass14 at mps2 bus 0 scbus2 target 4 lun 0
> pass15 at mps2 bus 0 scbus2 target 5 lun 0
> pass16 at mps2 bus 0 scbus2 target 6 lun 0
> da4 at mps0 bus 0 scbus0 target 6 lun 0
>
> I admit I am new to enclosure management - What am I missing?
>
> Thank you.
>
> --mikej
More information about the freebsd-scsi
mailing list