What does the error code 82 mean?
fengyd
fengyd81 at gmail.com
Wed Mar 4 09:40:51 UTC 2015
Hi,
It seems that during initialization, data transfer is set as 16-bit by
driver, it is set as 8-bit due to target reset.
So it means default data transfer for the drive is 8-bit?
-You might try seeing what the ahc(4) and ahd(4) drivers do in this
situation.
I didn't find the code related with ahc or ahd.
Do you know in which release ahc and ahd are implemented?
-If you have an idea that this may have happened, you can try doing a bus
or target rescan.
I just begin to study FREEBSD driver.
Could you give some instructions how to do bus or target rescan?
-Just out of curiosity, why are you doing multi-initiator with this
hardware?
Two units needs to access the device at the same time.
Thanks for your help.
Br.
Yafeng
On Wed, Mar 4, 2015 at 12:28 AM, Ken Merry <ken at freebsd.org> wrote:
> It sounds like the target reset is causing the drive to reset its
> negotiation parameters, and go back to narrow SCSI.
>
> UNIT1 still thinks it is talking wide SCSI, but the drive is actually
> talking 8 bit. So the drive sends back the 64 bytes of inquiry data in 64
> bus clocks. The drive is only changing the bottom 8 bits, but the
> controller thinks it is driving all 16, and records the top 8 bits as zeros.
>
> The result is that you get 64 bytes of “extra” data, and every other byte
> is zero.
>
> So, you’ll need to figure out a way for the sym(4) driver to figure out
> that the target has been reset, and re-negotiate with the drive.
>
> You might try seeing what the ahc(4) and ahd(4) drivers do in this
> situation. I don’t know whether or not they actually handle it, but it
> might be instructive to look.
>
> If you have an idea that this may have happened, you can try doing a bus
> or target rescan. That may go through the domain validation path and
> trigger re-negotiation with the target.
>
> Just out of curiosity, why are you doing multi-initiator with this
> hardware? It would probably be easier to do all of this with more modern
> SAS hardware and expanders.
>
> Ken
> —
> Ken Merry
> ken at FreeBSD.ORG
>
>
>
> On Mar 3, 2015, at 12:50 AM, fengyd <fengyd81 at gmail.com> wrote:
>
> Hi,
>
> Thanks very much for your reply.
>
> -How are you sending the INQUIRY command?
> Yes.
> -Are you sending it via the pass(4) driver?
> Yes
> -How many bytes are you asking for in the CDB?
> 64
> -How many bytes are you setting in the dxfer_len field in the CCB?
> 64, but it seems the device wants to transfer 128 bytes.
>
> -What kind of device are you talking to?
> Some kernel log:
> da3 at sym1 bus 0 target 0 lun 0
> da3: <FUJITSU MBA3073NP 4702> Fixed Direct Access SCSI-3 device
> da3: 40.000MB/s transfers (20.000MHz, offset 31, 16bit), Tagged Queueing
> Enabled
> da3: 70136MB (143638992 512 byte sectors: 255H 63S/T 8941C)
>
>
> <image.png>
>
> The brief connections as above:
> UNIT0 can access DISK0 and DISK1 by IOC0.
> UNIT1 can access DISK0 and DISK1 by IOC1.
>
> The problem happens when UNIT0 sends XPT_RESET_DEV to reset one disk,
> UNIT1 sends INQUIRY to get the basic information from the target, but fails
> to get the correct information.
>
> And I added some log.
>
>
> The right information got from device:
>
> 00 00 03 12 5B 00 01 3A 46 55 4A 49 54 53 55 20
>
> 4D 42 41 33 30 37 33 4E 50 20 20 20 20 20 20 20
>
> 34 37 30 32 42 42 53 32 50 41 41 30 31 31 46 34
>
> 00 00 00 00 00 00 00 00 0F 00 00 40 0B 54 01 3C
>
>
> The wrong information got from device:
>
> 00 00 00 00 03 00 12 00 5B 00 00 00 01 00 3A 00
>
> 46 00 55 00 4A 00 49 00 54 00 53 00 55 00 20 00
>
> 4D 00 42 00 41 00 33 00 30 00 37 00 33 00 4E 00
>
> 50 00 20 00 20 00 20 00 20 00 20 00 20 00 20 00
>
>
> Compared to the right log, it seems one extra byte *00* is added after
> every byte.
>
>
>
> Thanks for your help.
>
> Br.
> Yafeng
>
>
> On Tue, Mar 3, 2015 at 2:50 PM, Kenneth D. Merry <ken at freebsd.org> wrote:
>
>>
>> An overrun is exactly what the comment below indicates. It is when the
>> target sends back more data than you asked for. You will generally see it
>> on commands that receive data from a target.
>>
>> How are you sending the INQUIRY command? Are you sending it via the
>> pass(4) driver? How many bytes are you asking for in the CDB? How many
>> bytes are you setting in the dxfer_len field in the CCB?
>>
>> What kind of device are you talking to? Obviously, you're using the
>> sym(4)
>> driver, so I'm guessing this is a parallel SCSI device (unless there is a
>> virtualization stack that emulates the sym(4) hardware).
>>
>> Ken
>>
>> On Mon, Mar 02, 2015 at 15:49:57 +0800, fengyd wrote:
>> > Hi,
>> >
>> > I found the related code in the function sym_int_sir:
>> > /*
>> > * The device wants us to tranfer more data than
>> > * expected or in the wrong direction.
>> > * The number of extra bytes is in scratcha.
>> > * It is a data overrun condition.
>> > */
>> > case *SIR_DATA_OVERRUN*:
>> > if (cp) {
>> > OUTONB (HF_PRT, HF_EXT_ERR);
>> > * cp->xerr_status |= XE_EXTRA_DATA;*
>> > cp->extra_bytes += INL (nc_scratcha);
>> > }
>> > goto out;
>> >
>> > I'm not familiar with SCSI.
>> > What does DATA_OVERRUN actually mean?
>> > How can it be triggered?
>> > Could you give more details about it?
>> >
>> > Thanks for your help.
>> >
>> > Br.
>> > Yafeng
>> >
>> >
>> >
>> > On Sat, Feb 28, 2015 at 4:50 PM, fengyd <fengyd81 at gmail.com> wrote:
>> >
>> > > Hi,
>> > >
>> > > It seems the error code 82 & 3F is 0x12.
>> > > And the definition of the error code in the file cam.h:
>> > > CAM_AUTOSENSE_FAIL = 0x10,/* Autosense: request sense cmd
>> fail */
>> > > CAM_NO_HBA, /* No HBA Detected error */
>> > > CAM_DATA_RUN_ERR, /* Data Overrun error */
>> > >
>> > > So, it means data overrun error?
>> > >
>> > > Thanks.
>> > >
>> > > Br.
>> > > Yafeng
>> > >
>> > > On Sat, Feb 28, 2015 at 4:32 PM, fengyd <fengyd81 at gmail.com> wrote:
>> > >
>> > >> Hi,
>> > >>
>> > >> INQUIRY command is sent to the target, but error code 82 is returned.
>> > >> I added some log in the driver:
>> > >> SIR_COMPLETE_ERROR
>> > >> (pass0:sym0:0:0:0): sym_complete_error status = 18
>> > >> (pass0:sym0:0:0:0): status = 82
>> > >>
>> > >> Do you know what does the error code 82 mean?
>> > >>
>> > >> Thanks in advance.
>> > >>
>> > >> Br.
>> > >> Yafeng
>> > >>
>> > >
>> > >
>> > _______________________________________________
>> > freebsd-scsi at freebsd.org mailing list
>> > http://lists.freebsd.org/mailman/listinfo/freebsd-scsi
>> > To unsubscribe, send any mail to "freebsd-scsi-unsubscribe at freebsd.org"
>>
>> --
>> Kenneth Merry
>> ken at FreeBSD.ORG
>>
>
>
>
More information about the freebsd-scsi
mailing list