Device timeouts(?) with LSI SAS3008 on mpr(4)
Steven Hartland
killing at multiplay.co.uk
Mon Jul 13 09:13:44 UTC 2015
That would indicate that TRIM on your disks is causing a problem,
possibly a firmware bug causing TRIM requests to take an excessively
long time to complete.
What do you see from:
sysctl -a | grep -E '(delete|trim)'
Also while your seeing time-outs what does the output from gstat -d -p
look like?
Regards
Steve
On 13/07/2015 10:01, Yamagi Burmeister wrote:
> Hello,
> after some fiddling and testing I managed to track this down. TRIM is
> the culprit:
>
> - With vfs.zfs.trim.enabled set to 1 timeouts occure. Regardless of
> cabeling, of a backplane or direct connection. It doesn't matter if
> Intel DC S3500 oder S3700 SSDs are connected, but on the other hand
> both share the same controller. I don't have enough onboard S-ATA
> ports to test the whole setup without the 9300-8i HBA, but a short
> (maybe too short and without enough load) test with 6 SSDs didn't show
> any timeouts.
>
> - With vfs.zfs.trim.enabled set to 0 I havn't seen a single timeout
> for ~56 hours.
>
> Regards,
> Yamagi
>
> On Tue, 7 Jul 2015 13:24:16 +0200
> Yamagi Burmeister <lists at yamagi.org> wrote:
>
>> Hello,
>> I've got 3 new Supermicro servers based upon the X10DRi-LN4+ platform.
>> Each server is equiped with 2 LSI SAS9300-8i-SQL SAS adapters. Each
>> adapter serves 8 Intel DC S3700 SSDs. Operating system is 10.1-STABLE
>> as of r283938 on 2 servers and r285196 on the last one.
>>
>> The controller identify themself as:
>>
>> ----
>>
>> mpr0: <Avago Technologies (LSI) SAS3008> port 0x6000-0x60ff mem
>> 0xc7240000-0xc724ffff,0xc7200000-0xc723ffff irq 32 at device 0.0 on
>> pci2 mpr0: IOCFacts : MsgVersion: 0x205
>> HeaderVersion: 0x2300
>> IOCNumber: 0
>> IOCExceptions: 0x0
>> MaxChainDepth: 128
>> NumberOfPorts: 1
>> RequestCredit: 10240
>> ProductID: 0x2221
>> IOCRequestFrameSize: 32
>> MaxInitiators: 32
>> MaxTargets: 1024
>> MaxSasExpanders: 42
>> MaxEnclosures: 43
>> HighPriorityCredit: 128
>> MaxReplyDescriptorPostQueueDepth: 65504
>> ReplyFrameSize: 32
>> MaxVolumes: 0
>> MaxDevHandle: 1106
>> MaxPersistentEntries: 128
>> mpr0: Firmware: 08.00.00.00, Driver: 09.255.01.00-fbsd
>> mpr0: IOCCapabilities:
>> 7a85c<ScsiTaskFull,DiagTrace,SnapBuf,EEDP,TransRetry,EventReplay,MSIXIndex,HostDisc>
>>
>> ----
>>
>> 08.00.00.00 is the last available firmware.
>>
>>
>> Since day one 'dmesg' is cluttered with CAM errors:
>>
>> ----
>>
>> mpr1: Sending reset from mprsas_send_abort for target ID 5
>> (da11:mpr1:0:5:0): WRITE(10). CDB: 2a 00 4c 15 1f 88 00 00 08
>> 00 length 4096 SMID 554 terminated ioc 804b scsi 0 state c xfer 0
>> (da11:mpr1:0:5:0): ATA COMMAND PASS THROUGH(16). CDB: 85 0d 06 00 01 00
>> 01 00 00 00 00 00 00 40 06 00 length 512 SMID 506 ter(da11:mpr1:0:5:0):
>> READ(10). CDB: 28 00 4c 2b 95 c0 00 00 10 00 minated ioc 804b scsi 0
>> state c xfer 0 (da11:mpr1:0:5:0): CAM status: Command timeout mpr1:
>> (da11:Unfreezing devq for target ID 5 mpr1:0:5:0): Retrying command
>> (da11:mpr1:0:5:0): READ(10). CDB: 28 00 4c 2b 95 c0 00 00 10 00
>> (da11:mpr1:0:5:0): CAM status: SCSI Status Error (da11:mpr1:0:5:0):
>> SCSI status: Check Condition (da11:mpr1:0:5:0): SCSI sense: UNIT
>> ATTENTION asc:29,0 (Power on, reset, or bus device reset occurred)
>> (da11:mpr1:0:5:0): Retrying command (per sense data) (da11:mpr1:0:5:0):
>> READ(10). CDB: 28 00 4c 22 b5 b8 00 00 18 00 (da11:mpr1:0:5:0): CAM
>> status: SCSI Status Error (da11:mpr1:0:5:0): SCSI status: Check
>> Condition (da11:mpr1:0:5:0): SCSI sense: UNIT ATTENTION asc:29,0 (Power
>> on, reset, or bus device reset occurred) (da11:mpr1:0:5:0): Retrying
>> command (per sense data) (noperiph:mpr1:0:4294967295:0): SMID 2
>> Aborting command 0xfffffe0001601a30
>>
>> mpr1: Sending reset from mprsas_send_abort for target ID 2
>> (da8:mpr1:0:2:0): WRITE(10). CDB: 2a 00 59 81 ae 18 00 00 30 00
>> length 24576 SMID 898 terminated ioc 804b scsi 0 state c xfer 0
>> (da8:mpr1:0:2:0): READ(10). CDB: 28 00 59 77 cc e0 00 00 18 00 length
>> 12288 SMID 604 terminated ioc 804b scsi 0 state c xfer 0 mpr1:
>> Unfreezing devq for target ID 2 (da8:mpr1:0:2:0): ATA COMMAND PASS
>> THROUGH(16). CDB: 85 0d 06 00 01 00 01 00 00 00 00 00 00 40 06 00
>> (da8:mpr1:0:2:0): CAM status: Command timeout (da8:mpr1:0:2:0):
>> Retrying command (da8:mpr1:0:2:0): WRITE(10). CDB: 2a 00 59 81 ae 18 00
>> 00 30 00 (da8:mpr1:0:2:0): CAM status: SCSI Status Error
>> (da8:mpr1:0:2:0): SCSI status: Check Condition (da8:mpr1:0:2:0): SCSI
>> sense: UNIT ATTENTION asc:29,0 (Power on, reset, or bus device reset
>> occurred) (da8:mpr1:0:2:0): Retrying command (per sense data)
>> (da8:mpr1:0:2:0): READ(10). CDB: 28 00 59 41 3d 08 00 00 10 00
>> (da8:mpr1:0:2:0): CAM status: SCSI Status Error (da8:mpr1:0:2:0): SCSI
>> status: Check Condition (da8:mpr1:0:2:0): SCSI sense: UNIT ATTENTION
>> asc:29,0 (Power on, reset, or bus device reset occurred)
>> (da8:mpr1:0:2:0): Retrying command (per sense data)
>> (noperiph:mpr1:0:4294967295:0): SMID 3 Aborting command
>> 0xfffffe000160b660
>>
>> ----
>>
>> ZFS doesn't like this and sees read errors or even write errors. In
>> extreme cases the device is marked as FAULTED:
>>
>> ----
>>
>> pool: examplepool
>> state: DEGRADED
>> status: One or more devices are faulted in response to persistent
>> errors. Sufficient replicas exist for the pool to continue functioning
>> in a degraded state.
>> action: Replace the faulted device, or use 'zpool clear' to mark the
>> device repaired.
>> scan: none requested
>> config:
>>
>> NAME STATE READ WRITE CKSUM
>> examplepool DEGRADED 0 0 0
>> raidz1-0 ONLINE 0 0 0
>> da3p1 ONLINE 0 0 0
>> da4p1 ONLINE 0 0 0
>> da5p1 ONLINE 0 0 0
>> logs
>> da1p1 FAULTED 3 0 0 too many errors
>> cache
>> da1p2 FAULTED 3 0 0 too many errors
>> spares
>> da2p1 AVAIL
>>
>> errors: No known data errors
>>
>> ----
>>
>> The problems arise on all 3 machines all all SSDs nearly daily. So I
>> highly suspect a software issue. Has anyone an idea what's going on and
>> what I can do to solve this problems? More information can be provided
>> if necessary.
>>
>> Regards,
>> Yamagi
>>
>> --
>> Homepage: www.yamagi.org
>> XMPP: yamagi at yamagi.org
>> GnuPG/GPG: 0xEFBCCBCB
>> _______________________________________________
>> freebsd-scsi at freebsd.org mailing list
>> http://lists.freebsd.org/mailman/listinfo/freebsd-scsi
>> To unsubscribe, send any mail to "freebsd-scsi-unsubscribe at freebsd.org"
>
More information about the freebsd-scsi
mailing list