MPS driver and latest firmware
Borja Marcos
borjam at sarenet.es
Mon Oct 27 16:28:56 UTC 2014
On Oct 26, 2014, at 11:00 PM, Wes Morgan wrote:
> Hi all,
>
> I have an LSI 9201-16I controller that I updated to the latest firmware
> (20.00.00.00). Immediately I began seeing CAM errors like this:
>
> Oct 22 19:43:56 volatile kernel: (da13:mps0:0:13:0): CAM status: SCSI
> Status Error
> Oct 22 19:43:56 volatile kernel: (da13:mps0:0:13:0): SCSI status: Check
> Condition
> Oct 22 19:43:56 volatile kernel: (da13:mps0:0:13:0): SCSI sense: ABORTED
> COMMAND asc:47,3 (Information unit iuCRC error detected)
> Oct 22 19:43:56 volatile kernel: (da13:mps0:0:13:0): Retrying command (per
> sense data)
>
> It did not seem to cause any data corruption, but needless to say that kind
> of error is disconcerting. I was able to force a downgrade to the
> 19.00.00.00 firmware in FreeDOS, after which everything returned to normal.
I tried in a full functional system and I also suffered errors.
I had to downgrade as well. In case anyone runs into the same problem,
the card required a flash erase (sas2flsh -o -e 6) before being able to upload
the P19 firmware, as the NVRAM data was migrated to a new format.
I wonder if the NVRAM changes include that "sticky" target ID behavior...
And no, this is not a production system, just testing ;)
Cheers,
Borja.
-----------
This is some log information from my change.
I upgraded the firmware to P20 from sas2flash running on FreeBSD. Before doing it I exported the ZFS pool
in order to avoid aborted commands leading to corruption.
This is the syslog showing the controller having problems after the update to P20:
Oct 27 16:26:07 elibm kernel: mps0: Reinitializing controller,
Oct 27 16:26:15 elibm kernel: mps0: Warning: io_cmds_active is out of sync - resynching to 0
Oct 27 16:26:16 elibm kernel: mps0: Firmware: 20.00.00.00, Driver: 19.00.00.00-fbsd
Oct 27 16:26:16 elibm kernel: mps0: IOCCapabilities: 1285c<ScsiTaskFull,DiagTrace,SnapBuf,EEDP,TransRetry,EventReplay,HostDisc>
Oct 27 16:26:16 elibm kernel: mps0: mps_reinit finished sc 0xfffffe0000d84000 post 4 free 3
Oct 27 16:28:30 elibm kernel: (da2:mps0:0:11:0): READ(10). CDB: 28 00 00 e3 d3 38 00 00 e0 00 length 114688 SMID 706 command timeout cm 0xfffffe04976a1ea0 ccb 0xfffff80a8d573800
Oct 27 16:28:30 elibm kernel: (noperiph:mps0:0:4294967295:0): SMID 1 Aborting command 0xfffffe04976a1ea0
Oct 27 16:28:30 elibm kernel: (da2:mps0:0:11:0): READ(10). CDB: 28 00 00 e3 d2 58 00 00 e0 00 length 114688 SMID 738 command timeout cm 0xfffffe04976a48a0 ccb 0xfffff80a8d5bc800
Oct 27 16:28:30 elibm kernel: (da2:mps0:0:11:0): READ(10). CDB: 28 00 00 e3 d2 58 00 00 e0 00 length 114688 SMID 738 terminated ioc 804b scsi 0 state c xfer 112648
Oct 27 16:28:30 elibm kernel: (da2:mps0:0:11:0): READ(10). CDB: 28 00 00 e3 d3 38 00 00 e0 00
Oct 27 16:28:30 elibm kernel: (da2:mps0:0:11:0): CAM status: Command timeout
Oct 27 16:28:30 elibm kernel: (da2:mps0:0:11:0): Retrying command
Oct 27 16:28:31 elibm kernel: (da2:mps0:0:11:0): READ(10). CDB: 28 00 00 e3 d3 38 00 00 e0 00
Oct 27 16:28:31 elibm kernel: (da2:mps0:0:11:0): CAM status: SCSI Status Error
Oct 27 16:28:31 elibm kernel: (da2:mps0:0:11:0): SCSI status: Check Condition
Oct 27 16:28:31 elibm kernel: (da2:mps0:0:11:0): SCSI sense: UNIT ATTENTION asc:29,0 (Power on, reset, or bus device reset occurred)
Oct 27 16:28:31 elibm kernel: (da2:mps0:0:11:0): Retrying command (per sense data)
Oct 27 16:29:31 elibm kernel: (da0:mps0:0:9:0): READ(10). CDB: 28 00 00 e5 25 48 00 00 e0 00 length 114688 SMID 995 command timeout cm 0xfffffe04976b99f0 ccb 0xfffff80a3b6c5000
Oct 27 16:29:31 elibm kernel: (noperiph:mps0:0:4294967295:0): SMID 2 Aborting command 0xfffffe04976b99f0
Oct 27 16:29:32 elibm kernel: (da0:mps0:0:9:0): READ(10). CDB: 28 00 00 e5 25 48 00 00 e0 00
Oct 27 16:29:32 elibm kernel: (da0:mps0:0:9:0): CAM status: Command timeout
Oct 27 16:29:32 elibm kernel: (da0:mps0:0:9:0): Retrying command
Oct 27 16:29:32 elibm kernel: (da0:mps0:0:9:0): READ(10). CDB: 28 00 00 e5 25 48 00 00 e0 00
Oct 27 16:29:32 elibm kernel: (da0:mps0:0:9:0): CAM status: SCSI Status Error
Oct 27 16:29:32 elibm kernel: (da0:mps0:0:9:0): SCSI status: Check Condition
Oct 27 16:29:32 elibm kernel: (da0:mps0:0:9:0): SCSI sense: UNIT ATTENTION asc:29,0 (Power on, reset, or bus device reset occurred)
Oct 27 16:29:32 elibm kernel: (da0:mps0:0:9:0): Retrying command (per sense data)
Oct 27 16:30:33 elibm kernel: (da5:mps0:0:14:0): READ(10). CDB: 28 00 01 11 26 50 00 00 e0 00 length 114688 SMID 358 command timeout cm 0xfffffe04976855e0 ccb 0xfffff8017f856800
Oct 27 16:30:33 elibm kernel: (noperiph:mps0:0:4294967295:0): SMID 3 Aborting command 0xfffffe04976855e0
Oct 27 16:30:33 elibm kernel: (da2:mps0:0:11:0): READ(10). CDB: 28 00 01 11 26 30 00 00 e0 00 length 114688 SMID 432 command timeout cm 0xfffffe049768b700 ccb 0xfffff80a8d5e8800
Oct 27 16:30:33 elibm kernel: (noperiph:mps0:0:4294967295:0): SMID 4 Aborting command 0xfffffe049768b700
Oct 27 16:30:33 elibm kernel: (da2:mps0:0:11:0): READ(10). CDB: 28 00 01 11 25 50 00 00 e0 00 length 114688 SMID 356 command timeout cm 0xfffffe0497685340 ccb 0xfffff80a3b9c1000
Oct 27 16:30:33 elibm kernel: (da5:mps0:0:14:0): READ(10). CDB: 28 00 74 70 6a 10 00 00 10 00 length 8192 SMID 346 command timeout cm 0xfffffe0497684620 ccb 0xfffff80a8d5af000
Oct 27 16:30:33 elibm kernel: (da5:mps0:0:14:0): READ(10). CDB: 28 00 74 70 68 10 00 00 10 00 length 8192 SMID 500 command timeout cm 0xfffffe0497691040 ccb 0xfffff80a8d57c000
Oct 27 16:30:33 elibm kernel: (da5:mps0:0:14:0): READ(6). CDB: 08 00 02 10 10 00 length 8192 SMID 371 command timeout cm 0xfffffe04976866f0 ccb 0xfffff80a8d56c800
Oct 27 16:30:33 elibm kernel: (da5:mps0:0:14:0): READ(10). CDB: 28 00 01 11 27 30 00 00 e0 00 length 114688 SMID 321 command timeout cm 0xfffffe0497682550 ccb 0xfffff80a915c5000
Oct 27 16:30:33 elibm kernel: (da5:mps0:0:14:0): READ(10). CDB: 28 00 01 11 26 50 00 00 e0 00
Oct 27 16:30:33 elibm kernel: (da5:mps0:0:14:0): READ(10). CDB: 28 00 74 70 6a 10 00 00 10 00 length 8192 SMID 346 terminated ioc 804b scsi 0 state c xfer (da5:mps0:0:14:0): CAM status: Command timeout
Oct 27 16:30:33 elibm kernel: (da5: (da5:mps0:0:14:0): READ(10). CDB: 28 00 74 70 68 10 00 00 10 00 length 8192 SMID 500 terminated ioc 804b scsi 0 state c xfer mps0:0:0
Oct 27 16:30:33 elibm kernel: 14: (da5:mps0:0:14:0): READ(6). CDB: 08 00 02 10 10 00 length 8192 SMID 371 terminated ioc 804b scsi 0 state c xfer 0
Oct 27 16:30:33 elibm kernel: 0): (da5:mps0:0:14:0): READ(10). CDB: 28 00 01 11 27 30 00 00 e0 00 length 114688 SMID 321 terminated ioc 804b scsi 0 state c xfeRetrying command
Oct 27 16:30:33 elibm kernel: (da2:mps0:0:11:0): READ(10). CDB: 28 00 01 11 25 50 00 00 e0 00 length 114688 SMID 356 terminated ioc 804b scsi 0 state c xfer 112648
Oct 27 16:30:33 elibm kernel: (da2:mps0:0:11:0): READ(10). CDB: 28 00 01 11 26 30 00 00 e0 00
Oct 27 16:30:33 elibm kernel: (da2:mps0:0:11:0): CAM status: Command timeout
Oct 27 16:30:33 elibm kernel: (da2:mps0:0:11:0): Retrying command
Oct 27 16:30:34 elibm kernel: (da2:mps0:0:11:0): READ(10). CDB: 28 00 01 11 26 30 00 00 e0 00
Oct 27 16:30:34 elibm kernel: (da5:mps0:0:14:0): READ(10). CDB: 28 00 74 70 6a 10 00 00 10 00
Oct 27 16:30:34 elibm kernel: (da2:mps0:0:11:0): CAM status: SCSI Status Error
Oct 27 16:30:34 elibm kernel: (da5:mps0:0:14:0): CAM status: SCSI Status Error
Oct 27 16:30:34 elibm kernel: (da2:mps0:0:11:0): SCSI status: Check Condition
Oct 27 16:30:34 elibm kernel: (da5:mps0:0:14:0): SCSI status: Check Condition
Oct 27 16:30:34 elibm kernel: (da2:mps0:0:11:0): SCSI sense: UNIT ATTENTION asc:29,0 (Power on, reset, or bus device reset occurred)
Oct 27 16:30:34 elibm kernel: (da5:mps0:0:14:0): SCSI sense: UNIT ATTENTION asc:29,0 (Power on, reset, or bus device reset occurred)
Oct 27 16:30:34 elibm kernel: (da2:(da5:mps0:0:mps0:0:11:14:0): 0): Retrying command (per sense data)
Oct 27 16:36:28 elibm kernel: mps0: <LSI SAS2008> port 0x3f00-0x3fff mem 0x90ebc000-0x90ebffff,0x912c0000-0x912fffff irq 32 at device 0.0 on pci17
Oct 27 16:36:28 elibm kernel: mps0: Firmware: 20.00.00.00, Driver: 19.00.00.00-fbsd
Oct 27 16:36:28 elibm kernel: mps0: IOCCapabilities: 1285c<ScsiTaskFull,DiagTrace,SnapBuf,EEDP,TransRetry,EventReplay,HostDisc>
Oct 27 16:36:28 elibm kernel: ses0 at mps0 bus 0 scbus0 target 15 lun 0
Oct 27 16:36:28 elibm kernel: ses1 at mps0 bus 0 scbus0 target 26 lun 0
Oct 27 16:36:28 elibm kernel: da0 at mps0 bus 0 scbus0 target 9 lun 0
Oct 27 16:36:28 elibm kernel: da1 at mps0 bus 0 scbus0 target 10 lun 0
Oct 27 16:36:28 elibm kernel: da2 at mps0 bus 0 scbus0 target 11 lun 0
Oct 27 16:36:28 elibm kernel: da3 at mps0 bus 0 scbus0 target 12 lun 0
Oct 27 16:36:28 elibm kernel: da5 at mps0 bus 0 scbus0 target 14 lun 0
Oct 27 16:36:28 elibm kernel: da4 at mps0 bus 0 scbus0 target 13 lun 0
Oct 27 16:36:28 elibm kernel: da6 at mps0 bus 0 scbus0 target 17 lun 0
Oct 27 16:36:28 elibm kernel: da7 at mps0 bus 0 scbus0 target 18 lun 0
Oct 27 16:36:28 elibm kernel: da9 at mps0 bus 0 scbus0 target 21 lun 0
Oct 27 16:36:28 elibm kernel: da8 at mps0 bus 0 scbus0 target 20 lun 0
Oct 27 16:36:28 elibm kernel: da12 at mps0 bus 0 scbus0 target 27 lun 0
Oct 27 16:36:28 elibm kernel: da10 at mps0 bus 0 scbus0 target 22 lun 0
Oct 27 16:36:28 elibm kernel: da11 at mps0 bus 0 scbus0 target 23 lun 0
Oct 27 16:37:24 elibm kernel: (da0:mps0:0:9:0): READ(10). CDB: 28 00 00 e6 5d 08 00 00 28 00 length 20480 SMID 396 command timeout cm 0xfffffe0000e547c0 ccb 0xfffff800261ca800
Oct 27 16:37:24 elibm kernel: (noperiph:mps0:0:4294967295:0): SMID 1 Aborting command 0xfffffe0000e547c0
Oct 27 16:37:25 elibm kernel: (da0:mps0:0:9:0): READ(10). CDB: 28 00 00 e6 5d 08 00 00 28 00
Oct 27 16:37:25 elibm kernel: (da0:mps0:0:9:0): CAM status: Command timeout
Oct 27 16:37:25 elibm kernel: (da0:mps0:0:9:0): Retrying command
Oct 27 16:37:25 elibm kernel: (da0:mps0:0:9:0): READ(10). CDB: 28 00 00 e6 5d 08 00 00 28 00
Oct 27 16:37:25 elibm kernel: (da0:mps0:0:9:0): CAM status: SCSI Status Error
Oct 27 16:37:25 elibm kernel: (da0:mps0:0:9:0): SCSI status: Check Condition
Oct 27 16:37:25 elibm kernel: (da0:mps0:0:9:0): SCSI sense: UNIT ATTENTION asc:29,0 (Power on, reset, or bus device reset occurred)
Oct 27 16:37:25 elibm kernel: (da0:mps0:0:9:0): Retrying command (per sense data)
Oct 27 16:37:25 elibm kernel: (da5:mps0:0:14:0): READ(10). CDB: 28 00 01 14 fb 28 00 00 70 00 length 57344 SMID 292 command timeout cm 0xfffffe0000e4bf40 ccb 0xfffff8000fd0a000
Oct 27 16:37:25 elibm kernel: (noperiph:mps0:0:4294967295:0): SMID 2 Aborting command 0xfffffe0000e4bf40
Oct 27 16:37:25 elibm kernel: (da5:mps0:0:14:0): READ(10). CDB: 28 00 01 14 fa 48 00 00 e0 00 length 114688 SMID 276 command timeout cm 0xfffffe0000e4aa40 ccb 0xfffff8007daa0000
Oct 27 16:37:26 elibm kernel: (da5:mps0:0:14:0): READ(10). CDB: 28 00 01 14 fa 48 00 00 e0 00 length 114688 SMID 276 terminated ioc 804b scsi 0 state c xfer 113668
Oct 27 16:37:26 elibm kernel: (da5:mps0:0:14:0): READ(10). CDB: 28 00 01 14 fb 28 00 00 70 00
Oct 27 16:37:26 elibm kernel: (da5:mps0:0:14:0): CAM status: Command timeout
Oct 27 16:37:26 elibm kernel: (da5:mps0:0:14:0): Retrying command
Oct 27 16:37:27 elibm kernel: (da5:mps0:0:14:0): READ(10). CDB: 28 00 01 14 fb 28 00 00 70 00
Oct 27 16:37:27 elibm kernel: (da5:mps0:0:14:0): CAM status: SCSI Status Error
Oct 27 16:37:27 elibm kernel: (da5:mps0:0:14:0): SCSI status: Check Condition
Oct 27 16:37:27 elibm kernel: (da5:mps0:0:14:0): SCSI sense: UNIT ATTENTION asc:29,0 (Power on, reset, or bus device reset occurred)
Oct 27 16:37:27 elibm kernel: (da5:mps0:0:14:0): Retrying command (per sense data)
Oct 27 16:38:27 elibm kernel: (da6:mps0:0:17:0): READ(10). CDB: 28 00 74 70 6a 10 00 00 10 00 length 8192 SMID 464 command timeout cm 0xfffffe0000e5a100 ccb 0xfffff8002620e000
Oct 27 16:38:27 elibm kernel: (noperiph:mps0:0:4294967295:0): SMID 3 Aborting command 0xfffffe0000e5a100
Oct 27 16:38:27 elibm kernel: (da6:mps0:0:17:0): READ(10). CDB: 28 00 74 70 68 10 00 00 10 00 length 8192 SMID 459 command timeout cm 0xfffffe0000e59a70 ccb 0xfffff8000fcfa800
Oct 27 16:38:27 elibm kernel: (da6:mps0:0:17:0): READ(6). CDB: 08 00 02 10 10 00 length 8192 SMID 452 command timeout cm 0xfffffe0000e59140 ccb 0xfffff8007dab0800
Oct 27 16:38:27 elibm kernel: (da6:mps0:0:17:0): READ(10). CDB: 28 00 01 15 0d 88 00 00 70 00 length 57344 SMID 443 command timeout cm 0xfffffe0000e58570 ccb 0xfffff8000cf25800
Oct 27 16:38:27 elibm kernel: (da6:mps0:0:17:0): READ(10). CDB: 28 00 01 15 0d 40 00 00 28 00 length 20480 SMID 489 command timeout cm 0xfffffe0000e5c1d0 ccb 0xfffff8007daa4800
Oct 27 16:38:27 elibm kernel: (da6:mps0:0:17:0): READ(10). CDB: 28 00 01 15 0d 40 00 00 28 00 length 20480 SMID 489 terminated ioc 804b scsi 0 state c xfer 19460
Oct 27 16:38:27 elibm kernel: (da6:mps0:0:17:0): READ(10). CDB: 28 00 74 70 68 10 00 00 10 00 length 8192 SMID 459 terminated ioc 804b scsi 0 state c xfer (da6:mps0:0:17:0): READ(10). CDB: 28 00 74 70 6a 10 00 00 10 00
Oct 27 16:38:27 elibm kernel: (da6:mps0:0:17:0): CAM status: Command timeout
Oct 27 16:38:27 elibm kernel: (da6:mps0:0:17:0): READ(6). CDB: 08 00 02 10 10 00 length 8192 SMID 452 terminated ioc 804b scsi 0 state c xfer 0
Oct 27 16:38:27 elibm kernel: (da6: (da6:mps0:0:17:0): READ(10). CDB: 28 00 01 15 0d 88 00 00 70 00 length 57344 SMID 443 terminated ioc 804b scsi 0 state c xfermps0:0: 0
Oct 27 16:38:28 elibm kernel: (da6:mps0:0:17:0): READ(10). CDB: 28 00 74 70 6a 10 00 00 10 00
Oct 27 16:38:28 elibm kernel: (da6:mps0:0:17:0): CAM status: SCSI Status Error
Oct 27 16:38:28 elibm kernel: (da6:mps0:0:17:0): SCSI status: Check Condition
Oct 27 16:38:28 elibm kernel: (da6:mps0:0:17:0): SCSI sense: UNIT ATTENTION asc:29,0 (Power on, reset, or bus device reset occurred)
Oct 27 16:38:28 elibm kernel: (da6:mps0:0:17:0): Retrying command (per sense data)
Oct 27 16:45:21 elibm kernel: mps0: Reinitializing controller,
Oct 27 16:45:22 elibm kernel: mps0: Warning: io_cmds_active is out of sync - resynching to 0
Oct 27 16:45:22 elibm kernel: mps0: Firmware: 20.00.00.00, Driver: 19.00.00.00-fbsd
Oct 27 16:45:22 elibm kernel: mps0: IOCCapabilities: 1285c<ScsiTaskFull,DiagTrace,SnapBuf,EEDP,TransRetry,EventReplay,HostDisc>
Oct 27 16:45:22 elibm kernel: mps0: mps_reinit finished sc 0xfffffe0000d84000 post 4 free 3
------------
At 17:13, system rebooted with the freshly downgraded controller, this time to P19.
------------
Oct 27 17:13:16 elibm kernel: mps0: <LSI SAS2008> port 0x3f00-0x3fff mem 0x90ebc000-0x90ebffff,0x912c0000-0x912fffff irq 32 at device 0.0 on pci17
Oct 27 17:13:16 elibm kernel: mps0: Firmware: 19.00.00.00, Driver: 19.00.00.00-fbsd
Oct 27 17:13:16 elibm kernel: mps0: IOCCapabilities: 1285c<ScsiTaskFull,DiagTrace,SnapBuf,EEDP,TransRetry,EventReplay,HostDisc>
Oct 27 17:13:16 elibm kernel: ses0 at mps0 bus 0 scbus0 target 15 lun 0
Oct 27 17:13:16 elibm kernel: ses1 at mps0 bus 0 scbus0 target 22 lun 0
Oct 27 17:13:16 elibm kernel: da1 at mps0 bus 0 scbus0 target 9 lun 0
Oct 27 17:13:16 elibm kernel: da2 at mps0 bus 0 scbus0 target 10 lun 0
Oct 27 17:13:16 elibm kernel: da0 at mps0 bus 0 scbus0 target 8 lun 0
Oct 27 17:13:16 elibm kernel: da3 at mps0 bus 0 scbus0 target 11 lun 0
Oct 27 17:13:16 elibm kernel: da4 at mps0 bus 0 scbus0 target 12 lun 0
Oct 27 17:13:16 elibm kernel: da5 at mps0 bus 0 scbus0 target 13 lun 0
Oct 27 17:13:16 elibm kernel: da6 at mps0 bus 0 scbus0 target 14 lun 0
Oct 27 17:13:16 elibm kernel: da10 at mps0 bus 0 scbus0 target 19 lun 0
Oct 27 17:13:16 elibm kernel: da7 at mps0 bus 0 scbus0 target 16 lun 0
Oct 27 17:13:16 elibm kernel: da9 at mps0 bus 0 scbus0 target 18 lun 0
Oct 27 17:13:16 elibm kernel: da8 at mps0 bus 0 scbus0 target 17 lun 0
Oct 27 17:13:16 elibm kernel: da11 at mps0 bus 0 scbus0 target 20 lun 0
Oct 27 17:13:16 elibm kernel: da12 at mps0 bus 0 scbus0 target 21 lun 0
sas2ircu output showing the SAS devices, which are mostly SATA disks. The setup is
satisfactorily functional with the P19 firmware.
root at elibm:~ # sas2ircu 0 display
LSI Corporation SAS2 IR Configuration Utility.
Version 18.00.00.00 (2013.11.18)
Copyright (c) 2009-2013 LSI Corporation. All rights reserved.
Read configuration has been initiated for controller 0
------------------------------------------------------------------------
Controller information
------------------------------------------------------------------------
Controller type : SAS2008
BIOS version : 7.37.00.00
Firmware version : 19.00.00.00
Channel description : 1 Serial Attached SCSI
Initiator ID : 0
Maximum physical devices : 255
Concurrent commands supported : 3432
Slot : Unknown
Segment : 0
Bus : 17
Device : 0
Function : 0
RAID Support : No
------------------------------------------------------------------------
IR Volume information
------------------------------------------------------------------------
------------------------------------------------------------------------
Physical device information
------------------------------------------------------------------------
Initiator at ID #0
Device is a Hard disk
Enclosure # : 2
Slot # : 16
SAS Address : 5000c50-0-05b5-ce25
State : Ready (RDY)
Size (in MB)/(in sectors) : 140014/286749479
Manufacturer : SEAGATE
Model Number : ST9146803SS
Firmware Revision : FS03
Serial No : 3SD02W5L
GUID : N/A
Protocol : SAS
Drive Type : SAS_HDD
Device is a Hard disk
Enclosure # : 2
Slot # : 17
SAS Address : 5005076-0-3e8e-81a2
State : Ready (RDY)
Size (in MB)/(in sectors) : 953869/1953525167
Manufacturer : ATA
Model Number : Samsung SSD 840
Firmware Revision : BB0Q
Serial No : S1D9NEADA08549F
GUID : N/A
Protocol : SATA
Drive Type : SATA_SSD
Device is a Hard disk
Enclosure # : 2
Slot # : 18
SAS Address : 5005076-0-3e8e-81a3
State : Ready (RDY)
Size (in MB)/(in sectors) : 953869/1953525167
Manufacturer : ATA
Model Number : Samsung SSD 840
Firmware Revision : BB0Q
Serial No : S1D9NEADA08548T
GUID : N/A
Protocol : SATA
Drive Type : SATA_SSD
Device is a Hard disk
Enclosure # : 2
Slot # : 19
SAS Address : 5005076-0-3e8e-81a4
State : Ready (RDY)
Size (in MB)/(in sectors) : 953869/1953525167
Manufacturer : ATA
Model Number : Samsung SSD 840
Firmware Revision : BB0Q
Serial No : S1D9NEADA08568E
GUID : N/A
Protocol : SATA
Drive Type : SATA_SSD
Device is a Hard disk
Enclosure # : 2
Slot # : 20
SAS Address : 5005076-0-3e8e-81a5
State : Ready (RDY)
Size (in MB)/(in sectors) : 953869/1953525167
Manufacturer : ATA
Model Number : Samsung SSD 840
Firmware Revision : BB0Q
Serial No : S1D9NEADA08547X
GUID : N/A
Protocol : SATA
Drive Type : SATA_SSD
Device is a Hard disk
Enclosure # : 2
Slot # : 21
SAS Address : 5005076-0-3e8e-81a6
State : Ready (RDY)
Size (in MB)/(in sectors) : 953869/1953525167
Manufacturer : ATA
Model Number : Samsung SSD 840
Firmware Revision : BB0Q
Serial No : S1D9NEADA08518Y
GUID : N/A
Protocol : SATA
Drive Type : SATA_SSD
Device is a Hard disk
Enclosure # : 2
Slot # : 22
SAS Address : 5005076-0-3e8e-81a7
State : Ready (RDY)
Size (in MB)/(in sectors) : 953869/1953525167
Manufacturer : ATA
Model Number : Samsung SSD 840
Firmware Revision : BB0Q
Serial No : S1D9NEADA08556K
GUID : N/A
Protocol : SATA
Drive Type : SATA_SSD
Device is a Enclosure services device
Enclosure # : 2
Slot # : 255
SAS Address : 5005076-0-3e8e-81b9
State : Standby (SBY)
Manufacturer : IBM-ESXS
Model Number : SAS EXP BP
Firmware Revision : 61A6
Serial No : 00000006
GUID : N/A
Protocol : SAS
Device Type : Enclosure services device
Device is a Hard disk
Enclosure # : 3
Slot # : 0
SAS Address : 5005076-0-3e8e-86e9
State : Ready (RDY)
Size (in MB)/(in sectors) : 953869/1953525167
Manufacturer : ATA
Model Number : Samsung SSD 840
Firmware Revision : BB0Q
Serial No : S1D9NEADA08550R
GUID : N/A
Protocol : SATA
Drive Type : SATA_SSD
Device is a Hard disk
Enclosure # : 3
Slot # : 1
SAS Address : 5005076-0-3e8e-86ea
State : Ready (RDY)
Size (in MB)/(in sectors) : 953869/1953525167
Manufacturer : ATA
Model Number : Samsung SSD 840
Firmware Revision : BB0Q
Serial No : S1D9NEADA08911Y
GUID : N/A
Protocol : SATA
Drive Type : SATA_SSD
Device is a Hard disk
Enclosure # : 3
Slot # : 2
SAS Address : 5005076-0-3e8e-86eb
State : Ready (RDY)
Size (in MB)/(in sectors) : 953869/1953525167
Manufacturer : ATA
Model Number : Samsung SSD 840
Firmware Revision : BB0Q
Serial No : S1D9NEADA08811L
GUID : N/A
Protocol : SATA
Drive Type : SATA_SSD
Device is a Hard disk
Enclosure # : 3
Slot # : 13
SAS Address : 5000c50-0-05b5-e531
State : Ready (RDY)
Size (in MB)/(in sectors) : 140014/286749479
Manufacturer : SEAGATE
Model Number : ST9146803SS
Firmware Revision : FS03
Serial No : 3SD02STR
GUID : N/A
Protocol : SAS
Drive Type : SAS_HDD
Device is a Hard disk
Enclosure # : 3
Slot # : 14
SAS Address : 5000c50-0-05b5-d489
State : Ready (RDY)
Size (in MB)/(in sectors) : 140014/286749479
Manufacturer : SEAGATE
Model Number : ST9146803SS
Firmware Revision : FS03
Serial No : 3SD02TV1
GUID : N/A
Protocol : SAS
Drive Type : SAS_HDD
Device is a Hard disk
Enclosure # : 3
Slot # : 15
SAS Address : 5000c50-0-05b5-f0ad
State : Ready (RDY)
Size (in MB)/(in sectors) : 140014/286749479
Manufacturer : SEAGATE
Model Number : ST9146803SS
Firmware Revision : FS03
Serial No : 3SD03F4C
GUID : N/A
Protocol : SAS
Drive Type : SAS_HDD
Device is a Enclosure services device
Enclosure # : 3
Slot # : 255
SAS Address : 5005076-0-3e8e-86f9
State : Standby (SBY)
Manufacturer : IBM-ESXS
Model Number : SAS EXP BP
Firmware Revision : 61A6
Serial No : 00000006
GUID : N/A
Protocol : SAS
Device Type : Enclosure services device
------------------------------------------------------------------------
Enclosure information
------------------------------------------------------------------------
Enclosure# : 1
Logical ID : 500605b0:07ba2100
Numslots : 8
StartSlot : 0
Enclosure# : 2
Logical ID : 50050760:3e8e81a0
Numslots : 25
StartSlot : 0
Enclosure# : 3
Logical ID : 50050760:3e8e86e0
Numslots : 25
StartSlot : 0
------------------------------------------------------------------------
SAS2IRCU: Command DISPLAY Completed Successfully.
SAS2IRCU: Utility Completed Successfully.
root at elibm:~ #
More information about the freebsd-scsi
mailing list