MPS driver and latest firmware
Borja Marcos
borjam at sarenet.es
Mon Nov 3 06:57:37 UTC 2014
On Nov 2, 2014, at 10:34 PM, Wes Morgan wrote:
> I was updating the firmware hoping that the targets went back to being assigned in "next available" order rather than sticky. I like each bay to have a specific device name, which is impossible due to the "remembered" target IDs.
Although complicated, sas2ircu is your friend.
It will give you an (as far as I know!) accurate list of disks, including the backplane slot where they are plugged.
For now it's the best solution I have found to identify the disks. The funny thing is, it's an "IR" configuration utility and
my cards are in "IT" mode. But it works :)
Cheers,
Borja.
Output example:
root at elibm:~ # sas2ircu 0 display
LSI Corporation SAS2 IR Configuration Utility.
Version 18.00.00.00 (2013.11.18)
Copyright (c) 2009-2013 LSI Corporation. All rights reserved.
Read configuration has been initiated for controller 0
------------------------------------------------------------------------
Controller information
------------------------------------------------------------------------
Controller type : SAS2008
BIOS version : 7.37.00.00
Firmware version : 19.00.00.00
Channel description : 1 Serial Attached SCSI
Initiator ID : 0
Maximum physical devices : 255
Concurrent commands supported : 3432
Slot : Unknown
Segment : 0
Bus : 17
Device : 0
Function : 0
RAID Support : No
------------------------------------------------------------------------
IR Volume information
------------------------------------------------------------------------
------------------------------------------------------------------------
Physical device information
------------------------------------------------------------------------
Initiator at ID #0
Device is a Hard disk
Enclosure # : 2
Slot # : 16
SAS Address : 5000c50-0-05b5-ce25
State : Ready (RDY)
Size (in MB)/(in sectors) : 140014/286749479
Manufacturer : SEAGATE
Model Number : ST9146803SS
Firmware Revision : FS03
Serial No : 3SD02W5L
GUID : N/A
Protocol : SAS
Drive Type : SAS_HDD
Device is a Hard disk
Enclosure # : 2
Slot # : 17
SAS Address : 5005076-0-3e8e-81a2
State : Ready (RDY)
Size (in MB)/(in sectors) : 953869/1953525167
Manufacturer : ATA
Model Number : Samsung SSD 840
Firmware Revision : BB0Q
Serial No : S1D9NEADA08549F
GUID : N/A
Protocol : SATA
Drive Type : SATA_SSD
Device is a Hard disk
Enclosure # : 2
Slot # : 18
SAS Address : 5005076-0-3e8e-81a3
State : Ready (RDY)
Size (in MB)/(in sectors) : 953869/1953525167
Manufacturer : ATA
Model Number : Samsung SSD 840
Firmware Revision : BB0Q
Serial No : S1D9NEADA08548T
GUID : N/A
Protocol : SATA
Drive Type : SATA_SSD
Device is a Hard disk
Enclosure # : 2
Slot # : 19
SAS Address : 5005076-0-3e8e-81a4
State : Ready (RDY)
Size (in MB)/(in sectors) : 953869/1953525167
Manufacturer : ATA
Model Number : Samsung SSD 840
Firmware Revision : BB0Q
Serial No : S1D9NEADA08568E
GUID : N/A
Protocol : SATA
Drive Type : SATA_SSD
Device is a Hard disk
Enclosure # : 2
Slot # : 20
SAS Address : 5005076-0-3e8e-81a5
State : Ready (RDY)
Size (in MB)/(in sectors) : 953869/1953525167
Manufacturer : ATA
Model Number : Samsung SSD 840
Firmware Revision : BB0Q
Serial No : S1D9NEADA08547X
GUID : N/A
Protocol : SATA
Drive Type : SATA_SSD
Device is a Hard disk
Enclosure # : 2
Slot # : 21
SAS Address : 5005076-0-3e8e-81a6
State : Ready (RDY)
Size (in MB)/(in sectors) : 953869/1953525167
Manufacturer : ATA
Model Number : Samsung SSD 840
Firmware Revision : BB0Q
Serial No : S1D9NEADA08518Y
GUID : N/A
Protocol : SATA
Drive Type : SATA_SSD
Device is a Hard disk
Enclosure # : 2
Slot # : 22
SAS Address : 5005076-0-3e8e-81a7
State : Ready (RDY)
Size (in MB)/(in sectors) : 953869/1953525167
Manufacturer : ATA
Model Number : Samsung SSD 840
Firmware Revision : BB0Q
Serial No : S1D9NEADA08556K
GUID : N/A
Protocol : SATA
Drive Type : SATA_SSD
Device is a Enclosure services device
Enclosure # : 2
Slot # : 255
SAS Address : 5005076-0-3e8e-81b9
State : Standby (SBY)
Manufacturer : IBM-ESXS
Model Number : SAS EXP BP
Firmware Revision : 61A6
Serial No : 00000006
GUID : N/A
Protocol : SAS
Device Type : Enclosure services device
Device is a Hard disk
Enclosure # : 3
Slot # : 0
SAS Address : 5005076-0-3e8e-86e9
State : Ready (RDY)
Size (in MB)/(in sectors) : 953869/1953525167
Manufacturer : ATA
Model Number : Samsung SSD 840
Firmware Revision : BB0Q
Serial No : S1D9NEADA08550R
GUID : N/A
Protocol : SATA
Drive Type : SATA_SSD
Device is a Hard disk
Enclosure # : 3
Slot # : 1
SAS Address : 5005076-0-3e8e-86ea
State : Ready (RDY)
Size (in MB)/(in sectors) : 953869/1953525167
Manufacturer : ATA
Model Number : Samsung SSD 840
Firmware Revision : BB0Q
Serial No : S1D9NEADA08911Y
GUID : N/A
Protocol : SATA
Drive Type : SATA_SSD
Device is a Hard disk
Enclosure # : 3
Slot # : 2
SAS Address : 5005076-0-3e8e-86eb
State : Ready (RDY)
Size (in MB)/(in sectors) : 953869/1953525167
Manufacturer : ATA
Model Number : Samsung SSD 840
Firmware Revision : BB0Q
Serial No : S1D9NEADA08811L
GUID : N/A
Protocol : SATA
Drive Type : SATA_SSD
Device is a Hard disk
Enclosure # : 3
Slot # : 13
SAS Address : 5000c50-0-05b5-e531
State : Ready (RDY)
Size (in MB)/(in sectors) : 140014/286749479
Manufacturer : SEAGATE
Model Number : ST9146803SS
Firmware Revision : FS03
Serial No : 3SD02STR
GUID : N/A
Protocol : SAS
Drive Type : SAS_HDD
Device is a Hard disk
Enclosure # : 3
Slot # : 14
SAS Address : 5000c50-0-05b5-d489
State : Ready (RDY)
Size (in MB)/(in sectors) : 140014/286749479
Manufacturer : SEAGATE
Model Number : ST9146803SS
Firmware Revision : FS03
Serial No : 3SD02TV1
GUID : N/A
Protocol : SAS
Drive Type : SAS_HDD
Device is a Hard disk
Enclosure # : 3
Slot # : 15
SAS Address : 5000c50-0-05b5-f0ad
State : Ready (RDY)
Size (in MB)/(in sectors) : 140014/286749479
Manufacturer : SEAGATE
Model Number : ST9146803SS
Firmware Revision : FS03
Serial No : 3SD03F4C
GUID : N/A
Protocol : SAS
Drive Type : SAS_HDD
Device is a Enclosure services device
Enclosure # : 3
Slot # : 255
SAS Address : 5005076-0-3e8e-86f9
State : Standby (SBY)
Manufacturer : IBM-ESXS
Model Number : SAS EXP BP
Firmware Revision : 61A6
Serial No : 00000006
GUID : N/A
Protocol : SAS
Device Type : Enclosure services device
------------------------------------------------------------------------
Enclosure information
------------------------------------------------------------------------
Enclosure# : 1
Logical ID : 500605b0:07ba2100
Numslots : 8
StartSlot : 0
Enclosure# : 2
Logical ID : 50050760:3e8e81a0
Numslots : 25
StartSlot : 0
Enclosure# : 3
Logical ID : 50050760:3e8e86e0
Numslots : 25
StartSlot : 0
------------------------------------------------------------------------
SAS2IRCU: Command DISPLAY Completed Successfully.
SAS2IRCU: Utility Completed Successfully.
root at elibm:~ #
More information about the freebsd-scsi
mailing list