[Bug 175670] smartctl fails on SAS disk connected to an Intel C600 controller (isci driver)

[Douglas Gilbert]

On 14-06-18 05:05 PM, bugzilla-noreply at freebsd.org wrote:
> https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=175670
>
> Edward Tomasz Napierala <trasz at FreeBSD.org> changed:
>
>             What    |Removed                     |Added
> ----------------------------------------------------------------------------
>                   CC|                            |trasz at FreeBSD.org
>              Summary|[iscsi] smartctl fails on   |smartctl fails on SAS disk
>                     |SAS disk connected to an    |connected to an Intel C600
>                     |Intel C600 controller (isci |controller (isci driver)
>                     |driver)                     |
>
> --- Comment #2 from Edward Tomasz Napierala <trasz at FreeBSD.org> ---
> Remove "[iscsi]" prefix; it's in no way related to iSCSI - it's isci(4).

This is an old report that I think should be retired.
Below is the output from the same model of drive with
0005 firmware (current, available from Seagate) rather
than 0004 shown in the report. This is with the latest
development version of smartmontools tested on
10.0-RELEASE-p4 and a LSI 9212-4i4e SAS controller.

I'm the smartmontools guy to fix that and I can't
replicate it so I'll treat it as closed.

Doug Gilbert


# smartctl -a /dev/da1
smartctl 6.3 2014-06-19 r3915 [FreeBSD 10.0-RELEASE-p4 i386] (local build)
Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Vendor:               SEAGATE
Product:              ST33000650SS
Revision:             0005
Compliance:           SPC-4
User Capacity:        3,000,592,982,016 bytes [3.00 TB]
Logical block size:   512 bytes
Formatted with type 1 protection
Rotation Rate:        7200 rpm
Form Factor:          3.5 inches
Logical Unit id:      0x5000c50033fe58db
Serial number:        xxxxxxxxxxxxxx
Device type:          disk
Transport protocol:   SAS (SPL-3)
Local Time is:        Thu Jun 19 14:47:10 2014 EDT
SMART support is:     Available - device has SMART capability.
SMART support is:     Enabled
Temperature Warning:  Enabled

=== START OF READ SMART DATA SECTION ===
SMART Health Status: OK

Current Drive Temperature:     32 C
Drive Trip Temperature:        68 C

Manufactured in week 18 of year 2011
Specified cycle count over device lifetime:  10000
Accumulated start-stop cycles:  239
Specified load-unload count over device lifetime:  300000
Accumulated load-unload cycles:  240
Elements in grown defect list: 0

Vendor (Seagate) cache information
   Blocks sent to initiator = 16089640
   Blocks received from initiator = 627264253
   Blocks read from cache and sent to initiator = 385140
   Number of read and write commands whose size <= segment size = 19988
   Number of read and write commands whose size > segment size = 1483

Vendor (Seagate/Hitachi) factory information
   number of hours powered up = 236.02
   number of minutes until next internal SMART test = 46

Error counter log:
            Errors Corrected by           Total   Correction     Gigabytes    Total
                ECC          rereads/    errors   algorithm      processed 
uncorrected
            fast | delayed   rewrites  corrected  invocations   [10^9 bytes]  errors
read:   29236610        0         0  29236610          0          8.366           0
write:         0        0         0         0          0        326.215           0
verify:       10        0         0        10          0          0.000           0

Non-medium error count:      147

SMART Self-test log
Num  Test              Status                 segment  LifeTime  LBA_first_err 
[SK ASC ASQ]
      Description                              number   (hours)
# 1  Background short  Completed                   -     110                 - 
[-   -    -]
# 2  Background short  Completed                   -       6                 - 
[-   -    -]

Long (extended) Self Test duration: 27600 seconds [460.0 minutes]