LSI 9300-4i4e support

[Desai, Kashyap]

Michael:

LSI 9300 card will work with <mpslsi3> driver which you have posted here from lsi's external site works for you. 

Prints which you have pointed for CAM status error are resolved in our latest driver, but still not posted to external site because we are waiting for Internal driver GA.

Regarding upstream submission of <mpslsi3> I have seen that Steve McConnnell is working with Ken D Merry to get driver inbox.

Added Steve M.. to give you more insight on mpslsi3 inbox.

` Kashyap

> -----Original Message-----
> From: owner-freebsd-scsi at freebsd.org [mailto:owner-freebsd-
> scsi at freebsd.org] On Behalf Of Michael Fuckner
> Sent: Sunday, September 29, 2013 11:07 PM
> To: dgilbert at interlog.com; FreeBSD-SCSI
> Subject: Re: LSI 9300-4i4e support
> 
> Or even add support for 9.2 which will be released tomorrow.
> 
> Regards,
>   Michael!
> 
> On 9/29/2013 5:55 PM, Douglas Gilbert wrote:
> > The mpslsi3.ko modules provided by LSI in their support pages for the
> > 9300-4i4e does work in 9.1 Release sufficiently well to bring up the
> > system.
> >
> > There is no sensible report about it discovering this HBA in dmesg,
> > just a thousand or so of these:
> >    kernel: (probe1022:mpslsi30:0:1023:0): INQUIRY. CDB: 12 0 0 0 24 0
> >    kernel: (probe1022:mpslsi30:0:1023:0): CAM status: Invalid Target
> ID
> >    kernel: (probe1022:mpslsi30:0:1023:0): Error 22, Unretryable error
> >
> > But it does get there in the end.
> >
> >
> > LSI, if you are reading this, why not add 9.1 Release to your driver
> > support zip file for the 9300 family?
> >
> > Doug Gilbert
> >
> > On 13-09-29 03:35 AM, Michael Fuckner wrote:
> >> Hi,
> >> did you try the driver provided by lsi? It seems to be for FreeBSD
> >> 9.0, but perhaps it is also working.
> >> http://www.lsi.com/products/storagecomponents/Pages/LSISAS9300-4i4e.a
> >> spx
> >> ->
> >> Support & Downloads -> Driver -> FreeBSD?
> >> Seems like 12GBit is not supported inbox right now- I am still
> >> waiting for my 12GBit HBA Card :( Regards,
> >>   Michael!
> >>
> >>  > Douglas Gilbert <dgilbert at interlog.com> hat am 28. September 2013
> >> um 22:27 geschrieben:
> >>  >
> >>  >
> >>  > I've noticed that 9.1 does not recognize a LSI 9300-4i4e  > SAS
> >> HBA (relatively new: 12 Gbps). Do any more recent  > RCs or betas
> >> have support for it?
> >>  >
> >>  > Doug Gilbert
> >>  > _______________________________________________
> >>  > freebsd-scsi at freebsd.org mailing list  >
> >> http://lists.freebsd.org/mailman/listinfo/freebsd-scsi
> >>  > To unsubscribe, send any mail to
> >> "freebsd-scsi-unsubscribe at freebsd.org"
> >
> 
> _______________________________________________
> freebsd-scsi at freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-scsi
> To unsubscribe, send any mail to "freebsd-scsi-unsubscribe at freebsd.org"