Problem adding SCSI quirks for a SSD, 4K sector and ZFS
Steven Hartland
killing at multiplay.co.uk
Thu Jan 24 11:19:24 UTC 2013
----- Original Message -----
From: "Borja Marcos" <borjam at sarenet.es>
To: <freebsd-scsi at freebsd.org>
Cc: "FreeBSD Filesystems" <freebsd-fs at freebsd.org>
Sent: Thursday, January 24, 2013 9:46 AM
Subject: Problem adding SCSI quirks for a SSD, 4K sector and ZFS
>
> Hello,
>
> Crossposting to FreeBSD-fs, as I am wondering if I have had a problem with ZFS and sector size detection as well.
>
> I am doing tests with an OCZ Vertex 4 connected to a SAS backplane.
>
> < OCZ-VERTEX4 1.5> at scbus6 target 22 lun 0 (pass19,da15)
>
> (The blank before "OCZ" really appears there)
>
> pass19: < OCZ-VERTEX4 1.5> Fixed Direct Access SCSI-5 device
> pass19: Serial Number OCZ-1SVG6KZ2YRMSS8E1
> pass19: 3.300MB/s transfers
>
> I am bypassing an "aac" RAID card so that the disks are directly attached to the da driver, instead of relying on the so-called
> JBOD feature.
>
> I have had a weird problem, with the disk being unresponsive to the REQUEST CAPACITY(16) command. Weird, seems it timeouts.
>
> So, just to complete the tests, I have added a quirk to scsi_da.c. Anyway, I also need the disk to be recognized as a 4K sector
> drive.
>
> I created a new quirk, called it DA_Q_NO_RC16, and added an entry to the quirk table, so that these drives are recognized as 4K
> drives and the driver doesn't try to send a RC(16) command.
>
> diff scsi_da.c.orig scsi_da.c
> 93c93,94
> < DA_Q_4K = 0x08
> ---
>> DA_Q_4K = 0x08,
>> DA_Q_NO_RC16 = 0x10
> 811a813,817
>> /* OCZ Vertex 4 firmware 1.5 */
>> { T_DIRECT, SIP_MEDIA_FIXED, "", "OCZ-VERTEX4", "*" },
>> /*quirks*/DA_Q_NO_RC16 | DA_Q_4K
>> },
>> {
> 1635,1636c1641,1646
> < /* Predict whether device may support READ CAPACITY(16). */
> < if (SID_ANSI_REV(&cgd->inq_data) >= SCSI_REV_SPC3) {
> ---
>> /*
>> * Predict whether device may support READ CAPACITY(16).
>> * BUT Some disks don't support RC(16) even though they should.
>> */
>> if ((SID_ANSI_REV(&cgd->inq_data) >= SCSI_REV_SPC3)
>> && !(softc->quirks & DA_Q_NO_RC16) ) {
>
>
>
> I think it's working. I haven't seen any more RC(16) errors, and the disk is working fine. Anyway I am not sure I've done it
> right. After adding the 4K quirk and rebooting, GEOM_PART complained that the partitions weren't aligned to 4K
>
> /var/log/messages.0:Jan 23 16:01:30 kernel: GEOM_PART: partition 1 is not aligned on 4096 bytes
> /var/log/messages.0:Jan 23 16:01:30 kernel: GEOM_PART: partition 2 is not aligned on 4096 bytes
>
> So it seems it works. However, when using the disk for ZFS, it still detects a 512 byte sector size, which is odd.
>
> Jan 23 16:01:30 rasputin kernel: GEOM: new disk da15
> Jan 23 16:01:30 rasputin kernel: da15 at aacp0 bus 0 scbus6 target 22 lun 0
> Jan 23 16:01:30 rasputin kernel: da15: < OCZ-VERTEX4 1.5> Fixed Direct Access SCSI-5 device
> Jan 23 16:01:30 rasputin kernel: da15: Serial Number OCZ-1SVG6KZ2YRMSS8E1
> Jan 23 16:01:30 rasputin kernel: da15: 3.300MB/s transfers
> Jan 23 16:01:30 rasputin kernel: da15: 488386MB (1000215216 512 byte sectors: 255H 63S/T 62260C)
>
>
> diskinfo is returning a sector size of 512 bytes, and a stripesize of 4096. Is this correct? ZFS is still detecting it as a 512
> byte sector disk.
>
> /dev/da15
> 512 # sectorsize
> 512110190592 # mediasize in bytes (477G)
> 1000215216 # mediasize in sectors
> 4096 # stripesize
> 0 # stripeoffset
> 62260 # Cylinders according to firmware.
> 255 # Heads according to firmware.
> 63 # Sectors according to firmware.
> OCZ-1SVG6KZ2YRMSS8E1 # Disk ident.
>
>
>
> So, to summarize:
>
> If the quirk was working, should diskinfo return a sector size of 512 bytes, or is it correct to show a "stripesize" of 4096?
>
> Do we have a bug either on ZFS or the disk drivers? The same experiment on another system (both are 9.1-RELEASE) and a similar
> drive attached to a SATA controller, also adding a 4K sector quirk for it, defines a stripe size instead of a sector size.
Simple answer is ZFS doesn't understand quirks. The attached patch does
what you're looking for along with a few other things, see notes at
the top for details.
Its not a final version as there's still some discussion about
implementation details but it should do what your looking for.
Regards
Steve
================================================
This e.mail is private and confidential between Multiplay (UK) Ltd. and the person or entity to whom it is addressed. In the event of misdirection, the recipient is prohibited from using, copying, printing or otherwise disseminating it or any information contained in it.
In the event of misdirection, illegible or incomplete transmission please telephone +44 845 868 1337
or return the E.mail to postmaster at multiplay.co.uk.
-------------- next part --------------
A non-text attachment was scrubbed...
Name: zzz-zfs-ashift-fix.patch
Type: application/octet-stream
Size: 12272 bytes
Desc: not available
URL: <http://lists.freebsd.org/pipermail/freebsd-scsi/attachments/20130124/1172b98e/attachment.obj>
More information about the freebsd-scsi
mailing list