kern/151564: [ciss] ciss(4) should increase CISS_MAX_LOGICAL to 107
Matthew X. Economou
xenophon at irtnog.org
Wed Feb 13 14:11:22 UTC 2013
Sean,
After I applied your patch to FreeBSD 9.1, the server locks up during
boot. I'm working on attaching a serial console in order to capture the
boot log.
Best wishes,
Matthew
--
I FIGHT FOR THE USERS
> -----Original Message-----
> From: owner-freebsd-scsi at freebsd.org [mailto:owner-freebsd-
> scsi at freebsd.org] On Behalf Of Sean Bruno
> Sent: Friday, January 11, 2013 8:20 PM
> To: freebsd-scsi at FreeBSD.org
> Subject: Re: kern/151564: [ciss] ciss(4) should increase
> CISS_MAX_LOGICAL to 107
>
> The following reply was made to PR kern/151564; it has been noted by
> GNATS.
>
> From: Sean Bruno <seanbru at yahoo-inc.com>
> To: bug-followup at FreeBSD.org, leon.kos at lecad.fs.uni-lj.si
> Cc: peter <peter at FreeBSD.org>
> Subject: Re: kern/151564: [ciss] ciss(4) should increase
> CISS_MAX_LOGICAL
> to 107
> Date: Fri, 11 Jan 2013 17:17:51 -0800
>
> --=-VU6ICzSz8eqrj1bn7pu+
> Content-Type: text/plain; charset="UTF-8"
> Content-Transfer-Encoding: 7bit
>
> ok, fixed on the 6i and older with the attached patch. Try this one
> instead, basically I had a typo in a variable name and I was making
core
> logic decisions in boot_verbose code. :-)
>
> this also means, I'm probably going to revert svn r242089 as it might
> not be the right thing to do, but impossible to hit on older
> controllers.
>
> ciss0: <HP Smart Array 6i> port 0x4000-0x40ff mem
> 0xfdff0000-0xfdff1fff,0xfdf80000-0xfdfbffff irq 51 at device 3.0 on
pci4
> ciss0: PERFORMANT Transport
> ciss0: got 0 MSI messages]
> ioapic2: routing intpin 3 (PCI IRQ 51) to lapic 0 vector 52
> ciss0: using 1024 of 1024 available commands
> ciss0: 1 logical drive configured
> ciss0: firmware 2.26
> ciss0: 2 SCSI channels
> ciss0: signature 'CISS'
> ciss0: valence 1
> ciss0: supported I/O methods 0x80000006<simple,performant>
> ciss0: active I/O method 0x5<performant>
> ciss0: 4G page base 0x00000000
> ciss0: interrupt coalesce delay 0us
> ciss0: interrupt coalesce count 16
> ciss0: max outstanding commands 1024
> ciss0: bus types 0x2<ultra3>
> ciss0: server name ''
> ciss0: heartbeat 0x1000008d
> ciss0: max logical logical volumes: 63
> ciss0: max physical disks supported: 1024
> ciss0: max physical disks per logical volume: 0
> ciss0: 7 physical devices
> ciss0: 1 logical drive
> ciss0: logical drive (b0t0): RAID 1(1+0), 103936MB online
>
>
> --=-VU6ICzSz8eqrj1bn7pu+
> Content-Disposition: attachment;
> filename="ciss_probe_logical_physical.diff"
> Content-Type: text/x-patch; name="ciss_probe_logical_physical.diff";
> charset="UTF-8"
> Content-Transfer-Encoding: 7bit
>
> --- //depot/yahoo/ybsd_9/src/sys/dev/ciss/ciss.c 2012-03-17
> 00:14:40.000000000 0000
> +++ /home/seanbru/ybsd_9/sys/dev/ciss/ciss.c 2012-03-17
> 00:14:40.000000000 0000
> @@ -1202,13 +1202,21 @@
> /* XXX only really required for old 5300 adapters? */
> sc->ciss_flags |= CISS_FLAG_BMIC_ABORT;
>
> + /*
> + * Earlier controller specs do not contain these config
> + * entries, so assume that a 0 means its old and assign
> + * these values to the defaults that were established
> + * when this driver was developed for them
> + */
> + if (sc->ciss_cfg->max_logical_supported == 0)
> + sc->ciss_cfg->max_logical_supported = CISS_MAX_LOGICAL;
> + if (sc->ciss_cfg->max_physical_supported == 0)
> + sc->ciss_cfg->max_physical_supported =
> CISS_MAX_PHYSICAL;
> /* print information */
> if (bootverbose) {
> -#if 0 /* XXX proxy volumes??? */
> ciss_printf(sc, " %d logical drive%s configured\n",
> sc->ciss_id->configured_logical_drives,
> (sc->ciss_id->configured_logical_drives == 1) ? "" :
> "s");
> -#endif
> ciss_printf(sc, " firmware %4.4s\n", sc->ciss_id-
> >running_firmware_revision);
> ciss_printf(sc, " %d SCSI channels\n", sc->ciss_id-
> >scsi_bus_count);
>
> @@ -1231,6 +1239,9 @@
> "\20\1ultra2\2ultra3\10fibre1\11fibre2\n");
> ciss_printf(sc, " server name '%.16s'\n", sc->ciss_cfg-
> >server_name);
> ciss_printf(sc, " heartbeat 0x%x\n", sc->ciss_cfg->heartbeat);
> + ciss_printf(sc, " max logical logical volumes: %d\n",
sc-
> >ciss_cfg->max_logical_supported);
> + ciss_printf(sc, " max physical disks supported: %d\n",
sc-
> >ciss_cfg->max_physical_supported);
> + ciss_printf(sc, " max physical disks per logical
volume: %d\n",
> sc->ciss_cfg->max_physical_per_logical);
> }
>
> out:
> @@ -1318,7 +1329,7 @@
> break;
> case CISS_CMD_STATUS_DATA_OVERRUN:
> ciss_printf(sc, "WARNING: more units than driver limit
> (%d)\n",
> - CISS_MAX_LOGICAL);
> + sc->ciss_cfg->max_logical_supported);
> break;
> default:
> ciss_printf(sc, "error detecting logical drive configuration
> (%s)\n",
> @@ -1352,7 +1363,7 @@
> debug_called(1);
>
> cll = ciss_report_luns(sc, CISS_OPCODE_REPORT_LOGICAL_LUNS,
> - CISS_MAX_LOGICAL);
> + sc->ciss_cfg->max_logical_supported);
> if (cll == NULL) {
> error = ENXIO;
> goto out;
> @@ -1360,9 +1371,9 @@
>
> /* sanity-check reply */
> ndrives = (ntohl(cll->list_size) / sizeof(union
ciss_device_address));
> - if ((ndrives < 0) || (ndrives > CISS_MAX_LOGICAL)) {
> + if ((ndrives < 0) || (ndrives > sc->ciss_cfg-
> >max_logical_supported)) {
> ciss_printf(sc, "adapter claims to report absurd number of
> logical drives (%d > %d)\n",
> - ndrives, CISS_MAX_LOGICAL);
> + ndrives, sc->ciss_cfg->max_logical_supported);
> error = ENXIO;
> goto out;
> }
> @@ -1385,19 +1396,20 @@
>
> for (i = 0; i <= sc->ciss_max_logical_bus; i++) {
> sc->ciss_logical[i] =
> - malloc(CISS_MAX_LOGICAL * sizeof(struct ciss_ldrive),
> + malloc(sc->ciss_cfg->max_logical_supported *
> + sizeof(struct ciss_ldrive),
> CISS_MALLOC_CLASS, M_NOWAIT | M_ZERO);
> if (sc->ciss_logical[i] == NULL) {
> error = ENXIO;
> goto out;
> }
>
> - for (j = 0; j < CISS_MAX_LOGICAL; j++)
> + for (j = 0; j < sc->ciss_cfg->max_logical_supported; j++)
> sc->ciss_logical[i][j].cl_status = CISS_LD_NONEXISTENT;
> }
>
>
> - for (i = 0; i < CISS_MAX_LOGICAL; i++) {
> + for (i = 0; i < sc->ciss_cfg->max_logical_supported; i++) {
> if (i < ndrives) {
> struct ciss_ldrive *ld;
> int bus, target;
> @@ -1439,7 +1451,7 @@
> target = 0;
>
> cll = ciss_report_luns(sc, CISS_OPCODE_REPORT_PHYSICAL_LUNS,
> - CISS_MAX_PHYSICAL);
> + sc->ciss_cfg->max_physical_supported);
> if (cll == NULL) {
> error = ENXIO;
> goto out;
> @@ -1982,7 +1994,7 @@
> bus_dma_tag_destroy(sc->ciss_parent_dmat);
> if (sc->ciss_logical) {
> for (i = 0; i <= sc->ciss_max_logical_bus; i++) {
> - for (j = 0; j < CISS_MAX_LOGICAL; j++) {
> + for (j = 0; j < sc->ciss_cfg->max_logical_supported; j++) {
> if (sc->ciss_logical[i][j].cl_ldrive)
> free(sc->ciss_logical[i][j].cl_ldrive,
> CISS_MALLOC_CLASS);
> if (sc->ciss_logical[i][j].cl_lstatus)
> @@ -2965,9 +2977,9 @@
> cpi->hba_inquiry = PI_TAG_ABLE; /* XXX is this correct?
> */
> cpi->target_sprt = 0;
> cpi->hba_misc = 0;
> - cpi->max_target = CISS_MAX_LOGICAL;
> + cpi->max_target = sc->ciss_cfg->max_logical_supported;
> cpi->max_lun = 0; /* 'logical drive' channel only
*/
> - cpi->initiator_id = CISS_MAX_LOGICAL;
> + cpi->initiator_id = sc->ciss_cfg->max_logical_supported;
> strncpy(cpi->sim_vid, "FreeBSD", SIM_IDLEN);
> strncpy(cpi->hba_vid, "msmith at freebsd.org", HBA_IDLEN);
> strncpy(cpi->dev_name, cam_sim_name(sim), DEV_IDLEN);
> @@ -3878,7 +3890,7 @@
> * drive address.
> */
> cll = ciss_report_luns(sc, CISS_OPCODE_REPORT_LOGICAL_LUNS,
> - CISS_MAX_LOGICAL);
> + sc->ciss_cfg->max_logical_supported);
> if (cll == NULL)
> return;
>
> @@ -3889,7 +3901,7 @@
> * firmware.
> */
> for (i = 0; i < sc->ciss_max_logical_bus; i++) {
> - for (j = 0; j < CISS_MAX_LOGICAL; j++) {
> + for (j = 0; j < sc->ciss_cfg->max_logical_supported; j++) {
> ld = &sc->ciss_logical[i][j];
>
> if (ld->cl_update == 0)
> @@ -4058,7 +4070,7 @@
> * Rescan the physical lun list for new items
> */
> cll = ciss_report_luns(sc,
> CISS_OPCODE_REPORT_PHYSICAL_LUNS,
> - CISS_MAX_PHYSICAL);
> + sc->ciss_cfg-
> >max_physical_supported);
> if (cll == NULL) {
> ciss_printf(sc, "Warning, cannot get physical lun
> list\n");
> break;
> @@ -4306,7 +4318,7 @@
>
> "\20\1notify_ok\2control_open\3aborting\4running\21fake_s
> ynch\22bmic_abort\n");
>
> for (i = 0; i < sc->ciss_max_logical_bus; i++) {
> - for (j = 0; j < CISS_MAX_LOGICAL; j++) {
> + for (j = 0; j < sc->ciss_cfg->max_logical_supported; j++) {
> ciss_printf(sc, "LOGICAL DRIVE %d: ", i);
> ciss_print_ldrive(sc, &sc->ciss_logical[i][j]);
> }
> --- //depot/yahoo/ybsd_9/src/sys/dev/ciss/cissreg.h 2011-11-02
> 23:46:55.000000000 0000
> +++ /home/seanbru/ybsd_9/sys/dev/ciss/cissreg.h 2011-11-02
> 23:46:55.000000000 0000
> @@ -425,6 +425,15 @@
> #define CISS_DRIVER_DAUGHTER_ATTACHED (1<<8)
> #define CISS_DRIVER_SCSI_PREFETCH (1<<9)
> u_int32_t max_sg_length; /* 31 in older firmware
> */
> +/*
> + * these fields appear in OpenCISS Spec 1.06
> + * http://cciss.sourceforge.net/#docs
> + */
> + u_int32_t max_logical_supported;
> + u_int32_t max_physical_supported;
> + u_int32_t max_physical_per_logical;
> + u_int32_t max_perfomant_mode_cmds;
> + u_int32_t max_block_fetch_count;
> } __packed;
>
> /*
>
> --=-VU6ICzSz8eqrj1bn7pu+--
>
> _______________________________________________
> freebsd-scsi at freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-scsi
> To unsubscribe, send any mail to "freebsd-scsi-
> unsubscribe at freebsd.org"
More information about the freebsd-scsi
mailing list