Current problem reports assigned to freebsd-scsi at FreeBSD.org

[FreeBSD bugmaster]

Note: to view an individual PR, use:
  http://www.freebsd.org/cgi/query-pr.cgi?pr=(number).

The following is a listing of current problems submitted by FreeBSD users.
These represent problem reports covering all versions including
experimental development code and obsolete releases.


S Tracker      Resp.      Description
--------------------------------------------------------------------------------
o kern/165982  scsi       [mpt] mpt instability, drive resets, and losses on Fre
o kern/165740  scsi       [cam] SCSI code must drain callbacks before free
o kern/162256  scsi       [mpt] QUEUE FULL EVENT and 'mpt_cam_event: 0x0'
o kern/153514  scsi       [cam] [panic] CAM related panic
o docs/151336  scsi       Missing documentation of scsi_ and ata_ functions in c
s kern/149927  scsi       [cam] hard drive not stopped before removing power dur
o kern/148083  scsi       [aac] Strange device reporting
o kern/147704  scsi       [mpt] sys/dev/mpt: new chip revision, partially unsupp
o kern/144648  scsi       [aac] Strange values of speed and bus width in dmesg
o kern/142351  scsi       [mpt] LSILogic driver performance problems
o kern/134488  scsi       [mpt] MPT SCSI driver probes max. 8 LUNs per device
o kern/132206  scsi       [mpt] system panics on boot when mirroring and 2nd dri
o kern/130621  scsi       [mpt] tranfer rate is inscrutable slow when use lsi213
o kern/129602  scsi       [ahd] ahd(4) gets confused and wedges SCSI bus
o kern/128452  scsi       [sa] [panic] Accessing SCSI tape drive randomly crashe
o kern/128245  scsi       [scsi] "inquiry data fails comparison at DV1 step" [re
o kern/127927  scsi       [isp] isp(4) target driver crashes kernel when set up 
o kern/123674  scsi       [ahc] ahc driver dumping
o sparc/121676 scsi       [iscsi] iscontrol do not connect iscsi-target on sparc
o kern/120487  scsi       [sg] scsi_sg incompatible with scanners
o kern/120247  scsi       [mpt] FreeBSD 6.3 and LSI Logic 1030 = only 3.300MB/s 
o kern/114597  scsi       [sym] System hangs at SCSI bus reset with dual HBAs

22 problems total.