isp driver crashing on 9.0

[Matthew Jacob]

On 10/23/2012 9:02 PM, Nick Triantos wrote:
> Hi,
>
> I've been happily using 8.3 on an old system, with a fiber channel SAN connected through a Qlogic QLA2200 card. All's been working well, but when I updated to FreeBSD 9.0, I'm now getting crashes in the isp driver at boot.
>
> I mostly wanted to understand whether this is still a supported configuration. If not, I'd suggest someone remove the hardware from the supported hardware list.
>
> The errors I see at boot are below. Any advice welcome.

This should work, but has received very light testing. Are you loading 
ispfw or isp_2200? Can you send a boot -verbose output? And some more 
what hardware this is in details?

I suspect that the 2200 ROM f/w might have problems using DMA to load 
firmware. This is a not very well documented area of QLogic stuff and 
likely has a whole host of holes.

>
> thanks!
> -Nick
>
> ...
> ZFS filesystem version 5
> ZFS storage pool version 28
> isp0: Internal Firmware Error on bus 0 @ RISC Address 0x16e5
> isp0: isp_reinit: cannot reset card
> isp0: unknown isp_async event 14
> isp0: Polled Mailbox Command (0x60) Timeout (30000000us) started it:1709)
> isp0: Mailbox Command 'INIT FIRMWARE' failed (TIMEOUT)
> isp0: isp_fibre_init:
> isp0: 0x00000000: 01 00 07 a5 00 08 00 01 5a 00 3c 01 21 00 00 00
> isp0: 0x00000010: 8b 01 08 d7 7d 00 00 1e 00 00 00 00 00 00 00 00
> isp0: 0x00000020: 00 00 00 00 00 04 00 01 00 00 96 d3 00 00 00 00
> isp0: 0x00000030: 00 00 97 d3 00 00 00 00 00 00 00 00 b4 00 00 00
> isp0: 0x00000040: 20 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> isp0: 0x00000050: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>
> _______________________________________________
> freebsd-scsi at freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-scsi
> To unsubscribe, send any mail to "freebsd-scsi-unsubscribe at freebsd.org"