mpt fails to find disks on LSILogic 1068

[Marius Strobl]

On Thu, Mar 22, 2012 at 11:09:38PM +0400, Dmitry Sivachenko wrote:
> On 3/22/12 2:01 PM, Marius Strobl wrote:
> >On Thu, Mar 22, 2012 at 09:15:52AM +0400, Dmitry Sivachenko wrote:
> >>Hello!
> >>
> >>I have a server with LSILogic 1068-IR Controller with 2 disks connected.
> >>This system was running FreeBSD-7.3 without a problem and recently I tried
> >>to upgrade to 9-STABLE (build on 15 of February).
> >>
> >>New version of FreeBSD fails to initialize this controller:
> >>
> >>mpt0:<LSILogic SAS/SATA Adapter>  port 0xd000-0xd0ff irq 26 at device 3.0
> >>on pci6
> >>pcib3: attempting to grow memory window for (0-0xffffffff,0x100000)
> >>         front candidate range: 0xfdd00000-0xfddfffff
> >>         back candidate range: 0cfe000000-0xfe0fffff
> >>pcib7: failed to allocate initial memory window (0-0xffffffff,0x100000)
> >>mpt0: 0x4000 bytes of rid 0x14 res 3 failed (0, 0xffffffffffffffff).
> >>mpt0: Unable to memory map registers.
> >>mpt0: Giving Up.
> >>
> >>Is it a known problem?
> >>Any ideas how to fix that?
> >>
> >This appaears to be an issue with pci(4) rather than mpt(4). What are
> >the relevant bits of a verbose 7.3 boot?
> >
> >Marius
> >
> 
> Here it is:
> 
> mpt0: <LSILogic SAS/SATA Adapter> port 0xd000-0xd0ff mem 
> 0xfdefc000-0xfdefffff,0xfdee0000-0xfdeeffff irq 26 at device 3.0 on pci6
> mpt0: Reserved 0x100 bytes for rid 0x10 type 4 at 0xd000
> mpt0: Reserved 0x4000 bytes for rid 0x14 type 3 at 0xfdefc000
> ioapic1: routing intpin 2 (PCI IRQ 26) to vector 51
> mpt0: [MPSAFE]
> mpt0: [ITHREAD]
> mpt0: MPI Version=1.5.16.0
> mpt0: No Handlers For Any Event Notify Frames. Event 0xa (ACK not required).
> mpt0: No Handlers For Any Event Notify Frames. Event 0x16 (ACK not 
> required).
> mpt0: No Handlers For Any Event Notify Frames. Event 0x16 (ACK not 
> required).
> mpt0: No Handlers For Any Event Notify Frames. Event 0x16 (ACK not 
> required).
> mpt0: No Handlers For Any Event Notify Frames. Event 0x12 (ACK not 
> required).
> mpt0: No Handlers For Any Event Notify Frames. Event 0x16 (ACK not 
> required).
> mpt0: No Handlers For Any Event Notify Frames. Event 0x16 (ACK not 
> required).
> mpt0: No Handlers For Any Event Notify Frames. Event 0x12 (ACK not 
> required).
> mpt0: No Handlers For Any Event Notify Frames. Event 0x16 (ACK not 
> required).
> mpt0: No Handlers For Any Event Notify Frames. Event 0x16 (ACK not 
> required).
> mpt0: No Handlers For Any Event Notify Frames. Event 0x16 (ACK not 
> required).
> mpt0: No Handlers For Any Event Notify Frames. Event 0xf (ACK required).
> mpt0: No Handlers For Any Event Notify Frames. Event 0xf (ACK required).
> mpt0: Capabilities: ( RAID-0 RAID-1E RAID-1 )
> mpt0: 0 Active Volumes (2 Max)
> mpt0: 0 Hidden Drive Members (14 Max)
> mpt0: No Handlers For Any Event Notify Frames. Event 0xa (ACK not required).

John, do you have an idea what could have caused the memory BAR to
disappear?

Marius