Can't load mps as module with custom kernel

[Pavel Timofeev]

You're right, thank you!) It's OK now. Here is a new patch.
Do I need to create PR or write to this thread is enough?

13 марта 2012 г. 4:43 пользователь Ryan Stone <rysto32 at gmail.com> написал:
> On Sun, Mar 11, 2012 at 6:13 AM, Pavel Timofeev <timp87 at gmail.com> wrote:
>> link_elf_obj: symbol firmware_get undefined
>> KLD file isp.ko - could not finalize loading
>
> Hm, it seems that isp needs to MODULE_DEPEND on firmware, too:
>
> MODULE_DEPEND(isp, firmware, 1, 1, 1);
-------------- next part --------------
--- /sys/dev/hptiop/hptiop.c	2012-03-12 12:03:51.000000000 +0400
+++ ./hptiop/hptiop.c	2012-03-11 13:14:49.000000000 +0400
@@ -1268,6 +1268,7 @@
 };
 
 DRIVER_MODULE(hptiop, pci, hptiop_pci_driver, hptiop_devclass, 0, 0);
+MODULE_DEPEND(hptiop, cam, 1, 1, 1);
 
 static int hptiop_probe(device_t dev)
 {
--- /sys/dev/hptmv/entry.c	2012-03-12 12:03:51.000000000 +0400
+++ ./hptmv/entry.c	2012-03-11 13:15:14.000000000 +0400
@@ -108,6 +108,7 @@
 
 #define __DRIVER_MODULE(p1, p2, p3, p4, p5, p6) DRIVER_MODULE(p1, p2, p3, p4, p5, p6)
 __DRIVER_MODULE(PROC_DIR_NAME, pci, hpt_pci_driver, hpt_devclass, 0, 0);
+MODULE_DEPEND(PROC_DIR_NAME, cam, 1, 1, 1); 
 
 #define ccb_ccb_ptr spriv_ptr0
 #define ccb_adapter ccb_h.spriv_ptr1
--- /sys/dev/isp/isp_pci.c	2011-11-16 06:52:24.000000000 +0400
+++ ./isp/isp_pci.c	2012-03-13 11:28:28.000000000 +0400
@@ -372,6 +372,8 @@
 };
 static devclass_t isp_devclass;
 DRIVER_MODULE(isp, pci, isp_pci_driver, isp_devclass, 0, 0);
+MODULE_DEPEND(isp, cam, 1, 1, 1);
+MODULE_DEPEND(isp, firmware, 1, 1, 1);
 
 static int
 isp_pci_probe(device_t dev)
--- /sys/dev/isp/isp_sbus.c	2011-02-15 00:50:51.000000000 +0300
+++ ./isp/isp_sbus.c	2012-03-13 11:28:43.000000000 +0400
@@ -106,6 +106,8 @@
 };
 static devclass_t isp_devclass;
 DRIVER_MODULE(isp, sbus, isp_sbus_driver, isp_devclass, 0, 0);
+MODULE_DEPEND(isp, cam, 1, 1, 1);
+MODULE_DEPEND(isp, firmware, 1, 1, 1);
 
 static int
 isp_sbus_probe(device_t dev)