LSI supported mps(4) driver in stable/9 and stable/8
Desai, Kashyap
Kashyap.Desai at lsi.com
Sat Feb 4 08:06:24 UTC 2012
There is one more instance of similar issue reported on freebsd-scsi mailing list.
~ Kashyap
> -----Original Message-----
> From: owner-freebsd-stable at freebsd.org [mailto:owner-freebsd-
> stable at freebsd.org] On Behalf Of Desai, Kashyap
> Sent: Friday, February 03, 2012 10:59 PM
> To: Johan Hendriks
> Cc: freebsd-stable
> Subject: RE: LSI supported mps(4) driver in stable/9 and stable/8
>
>
>
> > -----Original Message-----
> > From: Johan Hendriks [mailto:joh.hendriks at gmail.com]
> > Sent: Friday, February 03, 2012 10:53 PM
> > To: Desai, Kashyap
> > Cc: freebsd-stable
> > Subject: Re: LSI supported mps(4) driver in stable/9 and stable/8
> >
> > Desai, Kashyap schreef:
> > >
> > >> -----Original Message-----
> > >> From: Johan Hendriks [mailto:joh.hendriks at gmail.com]
> > >> Sent: Friday, February 03, 2012 10:02 PM
> > >> To: Desai, Kashyap
> > >> Cc: freebsd-stable
> > >> Subject: Re: LSI supported mps(4) driver in stable/9 and stable/8
> > >>
> > >> Desai, Kashyap schreef:
> > >>> Try attached patch.! (This patch is not taken against upstream
> code,
> > >> so you may see some hunk fail.)
> > >>> ~ Kashyap
> > >>>
> > >>>> -----Original Message-----
> > >>>> From: Johan Hendriks [mailto:joh.hendriks at gmail.com]
> > >>>> Sent: Friday, February 03, 2012 8:42 PM
> > >>>> To: Desai, Kashyap
> > >>>> Cc: freebsd-stable
> > >>>> Subject: Re: LSI supported mps(4) driver in stable/9 and stable/8
> > >>>>
> > >>>> Desai, Kashyap schreef:
> > >>>>> Hi Johan,
> > >>>>>
> > >>>>> I have already figure out this issue in our lab.
> > >>>>>
> > >>>>> I also have fix for this issue. (Just don't want to create
> > >> regression,
> > >>>> that is why I have not posted outside)
> > >>>>> Since you have seen similar issue, It is worth to try my patch.
> > >>>>>
> > >>>>> My machine is not getting IP right now. I will send you patch
> once
> > >> my
> > >>>> machine is in network ?
> > >>>>> ~ Kashyap
> > >>>>>
> > >>>>>
> > >>>>>> -----Original Message-----
> > >>>>>> From: owner-freebsd-stable at freebsd.org [mailto:owner-freebsd-
> > >>>>>> stable at freebsd.org] On Behalf Of Johan Hendriks
> > >>>>>> Sent: Friday, February 03, 2012 8:13 PM
> > >>>>>> To: Kenneth D. Merry
> > >>>>>> Cc: freebsd-stable
> > >>>>>> Subject: Re: LSI supported mps(4) driver in stable/9 and
> stable/8
> > >>>>>>
> > >>>>>> Kenneth D. Merry schreef:
> > >>>>>>> Hi folks,
> > >>>>>>>
> > >>>>>>> The LSI-supported version of the mps(4) driver that supports
> > their
> > >>>> 6Gb
> > >>>>>> SAS
> > >>>>>>> HBAs as well as WarpDrive controllers, is now in stable/9 and
> > >>>>>> stable/8.
> > >>>>>>> Please test it out and let me and Kashyap (CCed) know if you
> run
> > >>>> into
> > >>>>>>> any problems.
> > >>>>>>>
> > >>>>>>> In addition to supporting WarpDrive, the driver also supports
> > >>>>>> Integrated
> > >>>>>>> RAID.
> > >>>>>>>
> > >>>>>>> Thanks to LSI for doing the work on this driver!
> > >>>>>>>
> > >>>>>>> Note that the CAM infrastructure changes that went into
> > >> FreeBSD/head
> > >>>>>> along
> > >>>>>>> with this driver have not gone into either stable/9 or
> stable/8.
> > >>>> Only
> > >>>>>> the
> > >>>>>>> driver itself has been merged.
> > >>>>>>>
> > >>>>>>> The CAM infrastructure changes depend on some other da(4)
> driver
> > >>>>>> changes
> > >>>>>>> that will need to get merged before they can go back. If that
> > >> merge
> > >>>>>>> happens, it will probably only be into stable/9.
> > >>>>>>>
> > >>>>>>> A couple of notes about issues with this driver:
> > >>>>>>>
> > >>>>>>> - Unlike the previous mps(4) driver, it probes
> > sequentially.
> > >> If
> > >>>> you
> > >>>>>> have
> > >>>>>>> a lot of drives in your system, it will take a while to
> > >> probe
> > >>>> them
> > >>>>>> all.
> > >>>>>>> - You may see warning messages like this:
> > >>>>>>>
> > >>>>>>> _mapping_add_new_device: failed to add the device with handle
> > >> 0x0019
> > >>>>>> to persiste
> > >>>>>>> nt table because there is no free space available
> > >>>>>>> _mapping_add_new_device: failed to add the device with handle
> > >> 0x001a
> > >>>>>> to persiste
> > >>>>>>> nt table because there is no free space available
> > >>>>>>>
> > >>>>>>> - The driver is not endian safe. (It assumes a little
> > endian
> > >>>>>> machine.)
> > >>>>>>> This is not new, the previous version of the driver had
> > the
> > >>>> same
> > >>>>>> issue.
> > >>>>>>> The LSI folks know about these issues. The driver has passed
> > >> their
> > >>>>>> testing
> > >>>>>>> process.
> > >>>>>>>
> > >>>>>>> Many thanks to LSI for going through the effort to support
> > >> FreeBSD.
> > >>>>>>> Ken
> > >>>>>> Hello Ken.
> > >>>>>>
> > >>>>>> Just updated our 16 bay server. did a csup today.
> > >>>>>> did try some commands, it looked like the drives got husseled.
> > >>>>>>
> > >>>>>> But after giving the command camcontrol rescan all it does not
> > give
> > >>>> back
> > >>>>>> the prompt.
> > >>>>>> Also top shows me the following.
> > >>>>>> 1589 root 1 20 0 16384K 1376K cbwait 3 0:00
> 0.00%
> > >>>>>> camcontrol
> > >>>>>>
> > >>>>>> # on another console things works
> > >>>>>> filer01# camcontrol devlist
> > >>>>>> <ATA WDC WD800JD-60LS 1D07> at scbus0 target 8 lun 0
> > >>>> (pass0,da0)
> > >>>>>> <ATA WDC WD800JD-60LS 1D07> at scbus0 target 9 lun 0
> > >>>> (pass1,da1)
> > >>>>>> <ATA WDC WD2500AAJS-6 2E25> at scbus0 target 10 lun 0
> > >>>> (pass2,da2)
> > >>>>>> <ATA WDC WD2500JS-60M 2E04> at scbus0 target 11 lun 0
> > >>>> (pass3,da3)
> > >>>>>> <ATA WDC WD2500JS-60M 2E04> at scbus0 target 12 lun 0
> > >>>> (pass4,da4)
> > >>>>>> <ATA ST3250620NS BJH> at scbus0 target 13 lun 0
> > >>>> (pass5,da5)
> > >>>>>> <LSI CORP SAS2X28 0717> at scbus0 target 16 lun 0
> > >>>>>> (probe16,ses0,pass6)
> > >>>>>> <ATA Maxtor 6L080M0 1G10> at scbus0 target 17 lun 0
> > >>>> (pass7,da6)
> > >>>>>> <ATA Maxtor 6L080M0 1G10> at scbus0 target 18 lun 0
> > >>>> (pass8,da7)
> > >>>>>> <ATA WDC WD800JD-60LS 1D07> at scbus0 target 19 lun 0
> > >>>> (pass9,da8)
> > >>>>>> <ATA WDC WD800JD-60LU 1D07> at scbus0 target 20 lun 0
> > >>>>>> (pass10,da9)
> > >>>>>> <ATA GB0250EAFJF HPG6> at scbus0 target 21 lun 0
> > >>>>>> (pass11,da10)
> > >>>>>> <ATA ST3250620NS 3BJP> at scbus0 target 22 lun 0
> > >>>>>> (pass12,da11)
> > >>>>>> <ATA ST3250620NS 3BJP> at scbus0 target 23 lun 0
> > >>>>>> (pass13,da12)
> > >>>>>> <ATA ST3250620NS 3BJP> at scbus0 target 24 lun 0
> > >>>>>> (pass14,da13)
> > >>>>>> <ATA ST3250310AS B> at scbus0 target 27 lun 0
> > >>>>>> (pass15,da14)
> > >>>>>> <ATA ST3250620NS 3BJP> at scbus0 target 28 lun 0
> > >>>>>> (pass16,da15)
> > >>>>>> <ST3808110AS 3.AJJ> at scbus1 target 0 lun 0
> > >>>>>> (ada0,pass17)
> > >>>>>> <TSSTcorp CDDVDW SN-208BB SB00> at scbus3 target 0 lun 0
> > >>>> (pass18,cd0)
> > >>>>>> The controller is a LSI 9211-8i with IT firmware.
> > >>>>>>
> > >>>>>> here is the dmesg
> > >>>>>> Copyright (c) 1992-2012 The FreeBSD Project.
> > >>>>>> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992,
> > 1993,
> > >>>> 1994
> > >>>>>> The Regents of the University of California. All
> > rights
> > >>>>>> reserved.
> > >>>>>> FreeBSD is a registered trademark of The FreeBSD Foundation.
> > >>>>>> FreeBSD 9.0-STABLE #0: Fri Feb 3 10:27:18 CET 2012
> > >>>>>> root at filer01.neuteboom.local:/usr/obj/usr/src/sys/KRNL
> > amd64
> > >>>>>> CPU: Intel(R) Xeon(R) CPU E31220 @ 3.10GHz (3093.04-MHz K8-
> class
> > >> CPU)
> > >>>>>> Origin = "GenuineIntel" Id = 0x206a7 Family = 6 Model
> =
> > 2a
> > >>>>>> Stepping = 7
> > >>>>>>
> > >>>>>>
> > >>
> >
> Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE
> > >>
> ,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
> > >>>>>>
> > >>
> >
> Features2=0x15bae3ff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SS
> > >>
> SE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,TSCDLT,XSAVE,AVX>
> > >>>>>> AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM>
> > >>>>>> AMD Features2=0x1<LAHF>
> > >>>>>> TSC: P-state invariant, performance statistics
> > >>>>>> real memory = 17179869184 (16384 MB)
> > >>>>>> avail memory = 16493441024 (15729 MB)
> > >>>>>> Event timer "LAPIC" quality 600
> > >>>>>> ACPI APIC Table:<SUPERM SMCI--MB>
> > >>>>>> FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
> > >>>>>> FreeBSD/SMP: 1 package(s) x 4 core(s)
> > >>>>>> cpu0 (BSP): APIC ID: 0
> > >>>>>> cpu1 (AP): APIC ID: 2
> > >>>>>> cpu2 (AP): APIC ID: 4
> > >>>>>> cpu3 (AP): APIC ID: 6
> > >>>>>> ioapic0<Version 2.0> irqs 0-23 on motherboard
> > >>>>>> kbd1 at kbdmux0
> > >>>>>> acpi0:<SUPERM SMCI--MB> on motherboard
> > >>>>>> acpi0: Power Button (fixed)
> > >>>>>> Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
> > >>>>>> acpi_timer0:<24-bit timer at 3.579545MHz> port 0x408-0x40b
> on
> > >> acpi0
> > >>>>>> cpu0:<ACPI CPU> on acpi0
> > >>>>>> cpu1:<ACPI CPU> on acpi0
> > >>>>>> cpu2:<ACPI CPU> on acpi0
> > >>>>>> cpu3:<ACPI CPU> on acpi0
> > >>>>>> pcib0:<ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
> > >>>>>> pci0:<ACPI PCI bus> on pcib0
> > >>>>>> pcib1:<ACPI PCI-PCI bridge> irq 19 at device 6.0 on pci0
> > >>>>>> pci1:<ACPI PCI bus> on pcib1
> > >>>>>> mps0:<LSI SAS2008> port 0xe000-0xe0ff mem 0xfb600000-
> > 0xfb603fff
> > >> irq
> > >>>> 19
> > >>>>>> at device 0.0 on pci1
> > >>>>>> mps0: Firmware: 11.00.00.00, Driver: 11.255.03.00-fbsd
> > >>>>>> mps0: IOCCapabilities:
> > >>>>>>
> > >>
> >
> 1285c<ScsiTaskFull,DiagTrace,SnapBuf,EEDP,TransRetry,EventReplay,HostDis
> > >>>>>> c>
> > >>>>>> em0:<Intel(R) PRO/1000 Network Connection 7.2.3> port
> 0xf020-
> > >> 0xf03f
> > >>>> mem
> > >>>>>> 0xfb800000-0xfb81ffff,0xfb824000-0xfb824fff irq 20 at device
> 25.0
> > >> on
> > >>>>>> pci0
> > >>>>>> em0: Using an MSI interrupt
> > >>>>>> em0: Ethernet address: 00:25:90:57:20:bd
> > >>>>>> ehci0:<EHCI (generic) USB 2.0 controller> mem 0xfb823000-
> > >> 0xfb8233ff
> > >>>> irq
> > >>>>>> 16 at device 26.0 on pci0
> > >>>>>> usbus0: EHCI version 1.0
> > >>>>>> usbus0:<EHCI (generic) USB 2.0 controller> on ehci0
> > >>>>>> pcib2:<ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0
> > >>>>>> pci2:<ACPI PCI bus> on pcib2
> > >>>>>> pcib3:<ACPI PCI-PCI bridge> irq 17 at device 28.4 on pci0
> > >>>>>> pci3:<ACPI PCI bus> on pcib3
> > >>>>>> em1:<Intel(R) PRO/1000 Network Connection 7.2.3> port
> 0xd000-
> > >> 0xd01f
> > >>>> mem
> > >>>>>> 0xfb700000-0xfb71ffff,0xfb720000-0xfb723fff irq 16 at device
> 0.0
> > on
> > >>>> pci3
> > >>>>>> em1: Using MSIX interrupts with 3 vectors
> > >>>>>> em1: Ethernet address: 00:25:90:57:20:bc
> > >>>>>> ehci1:<EHCI (generic) USB 2.0 controller> mem 0xfb822000-
> > >> 0xfb8223ff
> > >>>> irq
> > >>>>>> 23 at device 29.0 on pci0
> > >>>>>> usbus1: EHCI version 1.0
> > >>>>>> usbus1:<EHCI (generic) USB 2.0 controller> on ehci1
> > >>>>>> pcib4:<ACPI PCI-PCI bridge> at device 30.0 on pci0
> > >>>>>> pci4:<ACPI PCI bus> on pcib4
> > >>>>>> vgapci0:<VGA-compatible display> mem
> > >>>>>> 0xf9000000-0xf9ffffff,0xfb000000-0xfb003fff,0xfa800000-
> 0xfaffffff
> > >> irq
> > >>>> 23
> > >>>>>> at device 3.0 on pci4
> > >>>>>> isab0:<PCI-ISA bridge> at device 31.0 on pci0
> > >>>>>> isa0:<ISA bus> on isab0
> > >>>>>> ahci0:<Intel Cougar Point AHCI SATA controller> port
> > >>>>>> 0xf070-0xf077,0xf060-0xf063,0xf050-0xf057,0xf040-0xf043,0xf000-
> > >> 0xf01f
> > >>>>>> mem 0xfb821000-0xfb8217ff irq 19 at device 31.2 on pci0
> > >>>>>> ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not
> > supported
> > >>>>>> ahcich0:<AHCI channel> at channel 0 on ahci0
> > >>>>>> ahcich1:<AHCI channel> at channel 1 on ahci0
> > >>>>>> ahcich2:<AHCI channel> at channel 2 on ahci0
> > >>>>>> ahcich3:<AHCI channel> at channel 3 on ahci0
> > >>>>>> ahcich4:<AHCI channel> at channel 4 on ahci0
> > >>>>>> ahcich5:<AHCI channel> at channel 5 on ahci0
> > >>>>>> pci0:<serial bus, SMBus> at device 31.3 (no driver attached)
> > >>>>>> acpi_button0:<Power Button> on acpi0
> > >>>>>> hpet0:<High Precision Event Timer> iomem 0xfed00000-
> 0xfed003ff
> > on
> > >>>> acpi0
> > >>>>>> ahcich0:<AHCI channel> at channel 0 on ahci0
> > >>>>>> ahcich1:<AHCI channel> at channel 1 on ahci0
> > >>>>>> ahcich2:<AHCI channel> at channel 2 on ahci0
> > >>>>>> ahcich3:<AHCI channel> at channel 3 on ahci0
> > >>>>>> ahcich4:<AHCI channel> at channel 4 on ahci0
> > >>>>>> ahcich5:<AHCI channel> at channel 5 on ahci0
> > >>>>>> pci0:<serial bus, SMBus> at device 31.3 (no driver attached)
> > >>>>>> acpi_button0:<Power Button> on acpi0
> > >>>>>> hpet0:<High Precision Event Timer> iomem 0xfed00000-
> 0xfed003ff
> > on
> > >>>> acpi0
> > >>>>>> Timecounter "HPET" frequency 14318180 Hz quality 950
> > >>>>>> Event timer "HPET" frequency 14318180 Hz quality 550
> > >>>>>> Event timer "HPET1" frequency 14318180 Hz quality 440
> > >>>>>> Event timer "HPET2" frequency 14318180 Hz quality 440
> > >>>>>> Event timer "HPET3" frequency 14318180 Hz quality 440
> > >>>>>> Event timer "HPET4" frequency 14318180 Hz quality 440
> > >>>>>> attimer0:<AT timer> port 0x40-0x43 irq 0 on acpi0
> > >>>>>> Timecounter "i8254" frequency 1193182 Hz quality 0
> > >>>>>> Event timer "i8254" frequency 1193182 Hz quality 100
> > >>>>>> atrtc0:<AT realtime clock> port 0x70-0x71 irq 8 on acpi0
> > >>>>>> Event timer "RTC" frequency 32768 Hz quality 0
> > >>>>>> atkbdc0:<Keyboard controller (i8042)> port 0x60,0x64 irq 1
> on
> > >> acpi0
> > >>>>>> atkbd0:<AT Keyboard> irq 1 on atkbdc0
> > >>>>>> kbd0 at atkbd0
> > >>>>>> atkbd0: [GIANT-LOCKED]
> > >>>>>> uart0:<16550 or compatible> port 0x3f8-0x3ff irq 4 flags
> 0x10
> > on
> > >>>> acpi0
> > >>>>>> uart1:<16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
> > >>>>>> uart2:<16550 or compatible> port 0x3e8-0x3ef irq 10 on acpi0
> > >>>>>> orm0:<ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-
> > 0xcdfff
> > >> on
> > >>>> isa0
> > >>>>>> sc0:<System console> at flags 0x100 on isa0
> > >>>>>> sc0: VGA<16 virtual consoles, flags=0x300>
> > >>>>>> vga0:<Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-
> > 0xbffff
> > >> on
> > >>>>>> isa0
> > >>>>>> ppc0: cannot reserve I/O port range
> > >>>>>> est0:<Enhanced SpeedStep Frequency Control> on cpu0
> > >>>>>> p4tcc0:<CPU Frequency Thermal Control> on cpu0
> > >>>>>> est1:<Enhanced SpeedStep Frequency Control> on cpu1
> > >>>>>> p4tcc1:<CPU Frequency Thermal Control> on cpu1
> > >>>>>> est2:<Enhanced SpeedStep Frequency Control> on cpu2
> > >>>>>> p4tcc2:<CPU Frequency Thermal Control> on cpu2
> > >>>>>> est3:<Enhanced SpeedStep Frequency Control> on cpu3
> > >>>>>> p4tcc3:<CPU Frequency Thermal Control> on cpu3
> > >>>>>> ZFS filesystem version 5
> > >>>>>> ZFS storage pool version 28
> > >>>>>> Timecounters tick every 1.000 msec
> > >>>>>> usbus0: 480Mbps High Speed USB v2.0
> > >>>>>> usbus1: 480Mbps High Speed USB v2.0
> > >>>>>> ugen0.1:<Intel> at usbus0
> > >>>>>> uhub0:<Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1>
> > on
> > >>>> usbus0
> > >>>>>> ugen1.1:<Intel> at usbus1
> > >>>>>> uhub1:<Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1>
> > on
> > >>>> usbus1
> > >>>>>> da0 at mps0 bus 0 scbus0 target 8 lun 0
> > >>>>>> da0:<ATA WDC WD800JD-60LS 1D07> Fixed Direct Access SCSI-6
> > device
> > >>>>>> da0: 300.000MB/s transfers
> > >>>>>> da0: Command Queueing enabled
> > >>>>>> da0: 76319MB (156301488 512 byte sectors: 255H 63S/T 9729C)
> > >>>>>> da1 at mps0 bus 0 scbus0 target 9 lun 0
> > >>>>>> da1:<ATA WDC WD800JD-60LS 1D07> Fixed Direct Access SCSI-6
> > device
> > >>>>>> da1: 300.000MB/s transfers
> > >>>>>> da1: Command Queueing enabled
> > >>>>>> da1: 76319MB (156301488 512 byte sectors: 255H 63S/T 9729C)
> > >>>>>> da2 at mps0 bus 0 scbus0 target 10 lun 0
> > >>>>>> da2:<ATA WDC WD2500AAJS-6 2E25> Fixed Direct Access SCSI-6
> > device
> > >>>>>> da2: 300.000MB/s transfers
> > >>>>>> da2: Command Queueing enabled
> > >>>>>> da2: 238475MB (488397168 512 byte sectors: 255H 63S/T 30401C)
> > >>>>>> da3 at mps0 bus 0 scbus0 target 11 lun 0
> > >>>>>> da3:<ATA WDC WD2500JS-60M 2E04> Fixed Direct Access SCSI-6
> > device
> > >>>>>> da3: 300.000MB/s transfers
> > >>>>>> da3: Command Queueing enabled
> > >>>>>> da3: 238475MB (488397168 512 byte sectors: 255H 63S/T 30401C)
> > >>>>>> da4 at mps0 bus 0 scbus0 target 12 lun 0
> > >>>>>> da4:<ATA WDC WD2500JS-60M 2E04> Fixed Direct Access SCSI-6
> > device
> > >>>>>> da4: 300.000MB/s transfers
> > >>>>>> da4: Command Queueing enabled
> > >>>>>> da4: 238475MB (488397168 512 byte sectors: 255H 63S/T 30401C)
> > >>>>>> da5 at mps0 bus 0 scbus0 target 13 lun 0
> > >>>>>> da5:<ATA ST3250620NS BJH> Fixed Direct Access SCSI-6 device
> > >>>>>> da5: 150.000MB/s transfers
> > >>>>>> da5: Command Queueing enabled
> > >>>>>> da5: 238475MB (488397168 512 byte sectors: 255H 63S/T 30401C)
> > >>>>>> da8 at mps0 bus 0 scbus0 target 19 lun 0
> > >>>>>> da8:<ATA WDC WD800JD-60LS 1D07> Fixed Direct Access SCSI-6
> > device
> > >>>>>> da8: 300.000MB/s transfers
> > >>>>>> da8: Command Queueing enabled
> > >>>>>> da8: 76319MB (156301488 512 byte sectors: 255H 63S/T 9729C)
> > >>>>>> da9 at mps0 bus 0 scbus0 target 20 lun 0
> > >>>>>> da9:<ATA WDC WD800JD-60LU 1D07> Fixed Direct Access SCSI-6
> > device
> > >>>>>> da9: 300.000MB/s transfers
> > >>>>>> da9: Command Queueing enabled
> > >>>>>> da9: 76319MB (156301488 512 byte sectors: 255H 63S/T 9729C)
> > >>>>>> da11 at mps0 bus 0 scbus0 target 22 lun 0
> > >>>>>> da11:<ATA ST3250620NS 3BJP> Fixed Direct Access SCSI-6
> device
> > >>>>>> da11: 150.000MB/s transfers
> > >>>>>> da11: Command Queueing enabled
> > >>>>>> da11: 238475MB (488397168 512 byte sectors: 255H 63S/T 30401C)
> > >>>>>> da12 at mps0 bus 0 scbus0 target 23 lun 0
> > >>>>>> da12:<ATA ST3250620NS 3BJP> Fixed Direct Access SCSI-6
> device
> > >>>>>> da12: 150.000MB/s transfers
> > >>>>>> da12: Command Queueing enabled
> > >>>>>> da12: 238475MB (488397168 512 byte sectors: 255H 63S/T 30401C)
> > >>>>>> da13 at mps0 bus 0 scbus0 target 24 lun 0
> > >>>>>> da13:<ATA ST3250620NS 3BJP> Fixed Direct Access SCSI-6
> device
> > >>>>>> da13: 150.000MB/s transfers
> > >>>>>> da13: Command Queueing enabled
> > >>>>>> da13: 238475MB (488397168 512 byte sectors: 255H 63S/T 30401C)
> > >>>>>> da14 at mps0 bus 0 scbus0 target 27 lun 0
> > >>>>>> da14:<ATA ST3250310AS B> Fixed Direct Access SCSI-6 device
> > >>>>>> da14: 300.000MB/s transfers
> > >>>>>> da14: Command Queueing enabled
> > >>>>>> da14: 238475MB (488397168 512 byte sectors: 255H 63S/T 30401C)
> > >>>>>> da15 at mps0 bus 0 scbus0 target 28 lun 0
> > >>>>>> da15:<ATA ST3250620NS 3BJP> Fixed Direct Access SCSI-6
> device
> > >>>>>> da15: 150.000MB/s transfers
> > >>>>>> da15: Command Queueing enabled
> > >>>>>> da15: 238475MB (488397168 512 byte sectors: 255H 63S/T 30401C)
> > >>>>>> ses0 at mps0 bus 0 scbus0 target 16 lun 0
> > >>>>>> ses0:<LSI CORP SAS2X28 0717> Fixed Enclosure Services SCSI-5
> > >> device
> > >>>>>> ses0: 600.000MB/s transfers
> > >>>>>> ses0: Command Queueing enabled
> > >>>>>> ses0: SCSI-3 SES Device
> > >>>>>> ada0 at ahcich0 bus 0 scbus1 target 0 lun 0
> > >>>>>> ada0:<ST3808110AS 3.AJJ> ATA-7 SATA 1.x device
> > >>>>>> ada0: 150.000MB/s transfers (SATA 1.x, UDMA5, PIO 8192bytes)
> > >>>>>> ada0: 76319MB (156301488 512 byte sectors: 16H 63S/T 16383C)
> > >>>>>> ada0: Previously was known as ad4
> > >>>>>> cd0 at ahcich2 bus 0 scbus3 target 0 lun 0
> > >>>>>> SMP: AP CPU #3 Launched!
> > >>>>>> cd0:<TSSTcorp CDDVDW SN-208BB SB00> Removable CD-ROM SCSI-0
> > >> device
> > >>>>>> cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO
> > >>>>>> 8192bytes)
> > >>>>>> cd0: Attempt to query device size failed: NOT READY, Medium not
> > >>>> present
> > >>>>>> - tray closed
> > >>>>>> SMP: AP CPU #2 Launched!
> > >>>>>> SMP: AP CPU #1 Launched!
> > >>>>>> da6 at mps0 bus 0 scbus0 target 17 lun 0
> > >>>>>> da6:<ATA Maxtor 6L080M0 1G10> Fixed Direct Access SCSI-6
> > device
> > >>>>>> da6: 150.000MB/s transfers
> > >>>>>> da6: Command Queueing enabled
> > >>>>>> da6: 76319MB (156301488 512 byte sectors: 255H 63S/T 9729C)
> > >>>>>> da7 at mps0 bus 0 scbus0 target 18 lun 0
> > >>>>>> da7:<ATA Maxtor 6L080M0 1G10> Fixed Direct Access SCSI-6
> > device
> > >>>>>> da7: 150.000MB/s transfers
> > >>>>>> da7: Command Queueing enabled
> > >>>>>> da7: 76319MB (156301488 512 byte sectors: 255H 63S/T 9729C)
> > >>>>>> da10 at mps0 bus 0 scbus0 target 21 lun 0
> > >>>>>> da10:<ATA GB0250EAFJF HPG6> Fixed Direct Access SCSI-6
> device
> > >>>>>> da10: 300.000MB/s transfers
> > >>>>>> da10: Command Queueing enabled
> > >>>>>> da10: 238475MB (488397168 512 byte sectors: 255H 63S/T 30401C)
> > >>>>>> GEOM: da15s1: geometry does not match label (16h,63s !=
> > 255h,63s).
> > >>>>>> uhub1: 2 ports with 2 removable, self powered
> > >>>>>> uhub0: 2 ports with 2 removable, self powered
> > >>>>>> Root mount waiting for: usbus1 usbus0
> > >>>>>> ugen0.2:<vendor 0x8087> at usbus0
> > >>>>>> uhub2:<vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00,
> > addr
> > >>>> 2>
> > >>>>>> on usbus0
> > >>>>>> ugen1.2:<vendor 0x8087> at usbus1
> > >>>>>> uhub3:<vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00,
> > addr
> > >>>> 2>
> > >>>>>> on usbus1
> > >>>>>> Root mount waiting for: usbus1 usbus0
> > >>>>>> uhub3: 6 ports with 6 removable, self powered
> > >>>>>> uhub2: 6 ports with 6 removable, self powered
> > >>>>>> ugen0.3:<Winbond Electronics Corp> at usbus0
> > >>>>>> ums0:<Winbond Electronics Corp Hermon USB hidmouse Device,
> class
> > >> 0/0,
> > >>>>>> rev 1.10/0.01, addr 3> on usbus0
> > >>>>>> ums0: 3 buttons and [Z] coordinates ID=0
> > >>>>>> ukbd0:<Winbond Electronics Corp Hermon USB hidmouse Device,
> class
> > >>>> 0/0,
> > >>>>>> rev 1.10/0.01, addr 3> on usbus0
> > >>>>>> kbd2 at ukbd0
> > >>>>>> Trying to mount root from ufs:/dev/ada0p2 [rw]...
> > >>>>>> em0: link state changed to UP
> > >>>>>>
> > >>>>>> thanks for your work.
> > >>>>>>
> > >>>>>> regards
> > >>>>>> Johan
> > >>>>>>
> > >>>>>>
> > >>>>>>
> > >>>>>>
> > >>>>>> _______________________________________________
> > >>>>>> freebsd-stable at freebsd.org mailing list
> > >>>>>> http://lists.freebsd.org/mailman/listinfo/freebsd-stable
> > >>>>>> To unsubscribe, send any mail to "freebsd-stable-
> > >>>>>> unsubscribe at freebsd.org"
> > >>>> Ok i will try the patch, no hurry, i am back at the office on
> > >> monday...
> > >>>> regards
> > >>>> Johan
> > >> Ok i applied the patch, hopefully i did it right.
> > >> I saw some failed hunk, but forgot to save the .rej files.
> > > You can observe if those hunk failure and if those are minor, we can
> > ignore it.
> > >
> > >> But the camcontrol rescan all command came back.
> > >> filer01# camcontrol rescan all
> > >> Re-scan of bus 0 was successful
> > >> Re-scan of bus 1 was successful
> > >> Re-scan of bus 2 was successful
> > >> Re-scan of bus 3 was successful
> > >> Re-scan of bus 4 was successful
> > >> Re-scan of bus 5 was successful
> > >> Re-scan of bus 6 was successful
> > >>
> > > I will post this logical changes to freebsd current.
> > >
> > > ~ Kashyap
> > >
> > >
> > >> if you need more info, let me know.
> > > Nope. Since things are working for your I don't need any details. :-
> )
> > >
> > >> regards
> > >> Johan
> > i looked for .rej files on my system, and this is the only one.
> >
> > vi /usr/src/sys/dev/mps/mps_sas.c.rej
> >
> > it contains the following
> > ***************
> > *** 2852,2858 ****
> > do {
> > rcap_buf =
> > malloc(sizeof(struct scsi_read_capacity_eedp),
> > - M_MPT2, M_WAITOK | M_ZERO);
> > if (rcap_buf == NULL) {
> > mps_dprint(sc, MPS_FAULT, "Unable to alloc read "
> > "capacity buffer for EEDP support.\n");
> > --- 3164,3170 ----
> > do {
> > rcap_buf =
> > malloc(sizeof(struct scsi_read_capacity_eedp),
> > + M_MPT2, M_NOWAIT| M_ZERO);
> > if (rcap_buf == NULL) {
> > mps_dprint(sc, MPS_FAULT, "Unable to alloc read "
> > "capacity buffer for EEDP support.\n");
> > ~
>
> This failed because above changes is already part of upstream. In my
> tree, I have back ported those change from upstream.
> So patch applied clean.
>
> ` Kashyap
>
> >
> > regards
> > Johan
> >
> >
>
> _______________________________________________
> freebsd-stable at freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-stable
> To unsubscribe, send any mail to "freebsd-stable-
> unsubscribe at freebsd.org"
More information about the freebsd-scsi
mailing list