kern/146287: [ciss] ciss(4) cannot see more than one SmartArray
controller
Ulf Zimmermann
ulf at Alameda.net
Thu May 6 17:41:35 UTC 2010
On Thu, May 06, 2010 at 09:58:50AM -0700, Sean Bruno wrote:
> On Wed, 2010-05-05 at 18:47 -0700, Ulf Zimmermann wrote:
> > > > Ok, found a machine and hooked it up. DL380 g4, has single port Qlogic Fibre
> > > > channel HBA in slot 1 and 2 right now. What version should I install? 8-REL?
> > > > Current?
> > > >
> > >
> > > Current if you please.
> > >
> > > sean
> >
> > Turns out the iLO on the system I first grabbed is busted, so I grabbed
> > another one. DL380 g4 with SmartArray P600 in slot 2 (middle) and a LSI
> > 1030 based U320 controller in slot 3 (top). Both show up on -CURRENT:
> >
> > ciss0: <HP Smart Array 6i> port 0x4000-0x40ff mem 0xfdef0000-0xfdef1fff,0xfde80000-0xfdebffff irq 51 at device 3.0 on pci4
> > ciss0: PERFORMANT Transport
> > ciss0: got 0 MSI messages]
> > ciss0: [ITHREAD]
> > ciss1: <HP Smart Array P600> port 0x5400-0x54ff mem 0xfdfb0000-0xfdfb1fff,0xfdf40000-0xfdf7ffff irq 78 at device 2.0 on pci6
> > ciss1: PERFORMANT Transport
> > ciss1: got 0 MSI messages]
> > ciss1: [ITHREAD]
> > da0 at ciss0 bus 0 scbus0 target 0 lun 0
> > mpt0: <LSILogic 1030 Ultra4 Adapter> port 0x5000-0x50ff mem 0xfdfe0000-0xfdffffff,0xfdfc0000-0xfdfdffff irq 74 at device 1.0 on pci6
> >
> >
> >
>
> So putting a card into the slot that failed on the previous machine
> works now? Madness.
>
> Can you check that both machines are running the same BIOS rev and then
> dump the dmesg+pciconf of the "new" machine here as well?
>
> Sean
>
>
Remember I am not the same person, who reported the failure. I pulled out an
older server, which we retired, to help potential fix the problem the reporter
had with the bridge for slot 2.
Here is the dmesg from verbose logging boot:
Copyright (c) 1992-2010 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 9.0-CURRENT-201004 #0: Tue Apr 6 16:57:13 UTC 2010
root at obrian.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC i386
WARNING: WITNESS option enabled, expect reduced performance.
Preloaded elf kernel "/boot/kernel/kernel" at 0xc1157000.
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 3000118380 Hz
CPU: Intel(R) Xeon(TM) CPU 3.00GHz (3000.12-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf43 Family = f Model = 4 Stepping = 3
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x641d<SSE3,DTES64,MON,DS_CPL,CNXT-ID,CX16,xTPR>
AMD Features=0x20000000<LM>
TSC: P-state invariant
Instruction TLB: 4 KB, 2 MB or 4 MB pages, fully associative, 64 entries
Data TLB: 4 KB or 4 MB pages, fully associative, 64 entries
1st-level data cache: 16 KB, 8-way set associative, sectored cache, 64 byte line size
Trace cache: 12K-uops, 8-way set associative
2nd-level cache: 2-MB, 8-way set associative, 64-byte line size
L2 cache: 2048 kbytes, 8-way associative, 64 bytes/line
real memory = 10737418240 (10240 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009dfff, 643072 bytes (157 pages)
0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
0x0000000001426000 - 0x00000000dc08dfff, 3670441984 bytes (896104 pages)
avail memory = 3668942848 (3498 MB)
Table 'FACP' at 0xdfff3380
Table 'SPCR' at 0xdfff3140
Table 'MCFG' at 0xdfff31c0
Table 'APIC' at 0xdfff3200
APIC: Found table at 0xdfff3200
MP Configuration Table version 1.4 found at 0xc00f2781
APIC: Using the MADT enumerator.
MADT: Found CPU APIC ID 0 ACPI ID 0: enabled
SMP: Added CPU 0 (AP)
MADT: Found CPU APIC ID 4 ACPI ID 4: disabled
MADT: Found CPU APIC ID 2 ACPI ID 2: disabled
MADT: Found CPU APIC ID 6 ACPI ID 6: enabled
SMP: Added CPU 6 (AP)
MADT: Found CPU APIC ID 1 ACPI ID 1: disabled
MADT: Found CPU APIC ID 5 ACPI ID 5: disabled
MADT: Found CPU APIC ID 3 ACPI ID 3: disabled
MADT: Found CPU APIC ID 7 ACPI ID 7: disabled
ACPI APIC Table: <HP 00000083>
INTR: Adding local APIC 6 as a target
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
FreeBSD/SMP: 1 package(s) x 1 core(s) x 2 HTT threads
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 6
x86bios: IVT 0x000000-0x0004ff at 0xc0000000
x86bios: SSEG 0x010000-0x01ffff at 0xc6dad000
x86bios: EBDA 0x09e000-0x09ffff at 0xc009e000
x86bios: ROM 0x0a0000-0x0effff at 0xc00a0000
APIC: CPU 0 has ACPI ID 0
APIC: CPU 1 has ACPI ID 6
bios32: Found BIOS32 Service Directory header at 0xc00ffee0
bios32: Entry = 0xf0000 (c00f0000) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xf0000+0x96
pnpbios: Found PnP BIOS data at 0xc00f4f90
pnpbios: Entry = f0000:5faf Rev = 1.0
Other BIOS signatures found:
ULE: setup cpu 0
ULE: setup cpu 1
ACPI: RSDP 0xf4f00 00024 (v2 HP )
ACPI: XSDT 0xdfff3300 00044 (v1 HP P51 00000002 ?? 0000162E)
ACPI: FACP 0xdfff3380 000F4 (v3 HP P51 00000002 ?? 0000162E)
ACPI Warning: Invalid length for Pm1aControlBlock: 32, using default 16 (20100331/tbfadt-707)
ACPI: DSDT 0xdfff3480 02D62 (v1 HP DSDT 00000001 INTL 20030228)
ACPI: FACS 0xdfff3100 00040
ACPI: SPCR 0xdfff3140 00050 (v1 HP SPCRRBSU 00000001 ?? 0000162E)
ACPI: MCFG 0xdfff31c0 0003C (v1 HP ProLiant 00000001 00000000)
ACPI: APIC 0xdfff3200 000C2 (v1 HP 00000083 00000002 00000000)
MADT: Found IO APIC ID 8, Interrupt 0 at 0xfec00000
ioapic0: Routing external 8259A's -> intpin 0
MADT: Found IO APIC ID 9, Interrupt 24 at 0xfec80000
MADT: Found IO APIC ID 10, Interrupt 48 at 0xfec80400
MADT: Found IO APIC ID 11, Interrupt 72 at 0xfec84000
MADT: Found IO APIC ID 12, Interrupt 96 at 0xfec84400
MADT: Interrupt override: source 0, irq 2
ioapic0: Routing IRQ 0 -> intpin 2
MADT: Interrupt override: source 9, irq 9
ioapic0: intpin 9 trigger: level
lapic: Routing NMI -> LINT1
lapic: LINT1 trigger: edge
lapic: LINT1 polarity: high
ioapic0 <Version 2.0> irqs 0-23 on motherboard
ioapic1 <Version 2.0> irqs 24-47 on motherboard
ioapic2 <Version 2.0> irqs 48-71 on motherboard
ioapic3 <Version 2.0> irqs 72-95 on motherboard
ioapic4 <Version 2.0> irqs 96-119 on motherboard
cpu0 BSP:
ID: 0x00000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400
wlan: <802.11 Link Layer>
nfslock: pseudo-device
kbd: new array size 4
kbd1 at kbdmux0
mem: <memory>
Pentium Pro MTRR support enabled
io: <I/O>
null: <null device, zero device>
random: <entropy source, Software, Yarrow>
hptrr: RocketRAID 17xx/2xxx SATA controller driver v1.2
npx0: INT 16 interface
acpi0: <HP P51> on motherboard
PCIe: Memory Mapped configuration base @ 0xe0000000
pcibios: BIOS version 2.10
ioapic0: routing intpin 9 (ISA IRQ 9) to lapic 0 vector 48
acpi0: [MPSAFE]
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
acpi0: wakeup code va 0xc6da7000 pa 0x1000
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: \\_SB_.PCI0.CFG0.MEM0 -> bus 0 dev 0 func 0
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: \\_SB_.PCI0.PTC0.PCXC.SHP0 -> bus 5 dev 0 func 0
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: \\_SB_.PCI0.IBRG.ICH5 -> bus 0 dev 31 func 0
ACPI timer: 0/4 0/5 0/5 0/5 0/5 0/5 0/453 0/5 0/5 0/5 -> 0
Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x908-0x90b on acpi0
cpu0: <ACPI CPU> on acpi0
cpu0: switching to generic Cx mode
cpu1: <ACPI CPU> on acpi0
pci_link0: Index IRQ Rtd Ref IRQs
Initial Probe 0 5 N 0 5 7 10 11
Validation 0 5 N 0 5 7 10 11
After Disable 0 255 N 0 5 7 10 11
pci_link1: Index IRQ Rtd Ref IRQs
Initial Probe 0 5 N 0 5 7 10 11
Validation 0 5 N 0 5 7 10 11
After Disable 0 255 N 0 5 7 10 11
pci_link2: Index IRQ Rtd Ref IRQs
Initial Probe 0 5 N 0 5 7 10 11
Validation 0 5 N 0 5 7 10 11
After Disable 0 255 N 0 5 7 10 11
pci_link3: Index IRQ Rtd Ref IRQs
Initial Probe 0 5 N 0 5 7 10 11
Validation 0 5 N 0 5 7 10 11
After Disable 0 255 N 0 5 7 10 11
pci_link4: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 5 7 10 11
Validation 0 255 N 0 5 7 10 11
After Disable 0 255 N 0 5 7 10 11
pci_link5: Index IRQ Rtd Ref IRQs
Initial Probe 0 5 N 0 5 7 10 11
Validation 0 5 N 0 5 7 10 11
After Disable 0 255 N 0 5 7 10 11
pci_link6: Index IRQ Rtd Ref IRQs
Initial Probe 0 5 N 0 5 7 10 11
Validation 0 5 N 0 5 7 10 11
After Disable 0 255 N 0 5 7 10 11
pci_link7: Index IRQ Rtd Ref IRQs
Initial Probe 0 5 N 0 5 7 10 11
Validation 0 5 N 0 5 7 10 11
After Disable 0 255 N 0 5 7 10 11
pcib0: <ACPI Host-PCI bridge> on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: domain=0, physical bus=0
found-> vendor=0x8086, dev=0x3590, revid=0x0c
domain=0, bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0146, statreg=0x0090, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x3595, revid=0x0c
domain=0, bus=0, slot=2, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns)
intpin=a, irq=255
powerspec 2 supports D0 D3 current D0
MSI supports 2 messages
found-> vendor=0x8086, dev=0x3599, revid=0x0c
domain=0, bus=0, slot=6, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns)
intpin=a, irq=255
powerspec 2 supports D0 D3 current D0
MSI supports 2 messages
found-> vendor=0x8086, dev=0x24d2, revid=0x02
domain=0, bus=0, slot=29, func=0
class=0c-03-00, hdrtype=0x00, mfdev=1
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=5
map[20]: type I/O Port, range 32, base 0x2000, size 5, enabled
pcib0: matched entry for 0.29.INTA
pcib0: slot 29 INTA hardwired to IRQ 16
found-> vendor=0x8086, dev=0x24d4, revid=0x02
domain=0, bus=0, slot=29, func=1
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=5
map[20]: type I/O Port, range 32, base 0x2020, size 5, enabled
pcib0: matched entry for 0.29.INTB
pcib0: slot 29 INTB hardwired to IRQ 19
found-> vendor=0x8086, dev=0x24d7, revid=0x02
domain=0, bus=0, slot=29, func=2
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=c, irq=5
map[20]: type I/O Port, range 32, base 0x2040, size 5, enabled
pcib0: matched entry for 0.29.INTC
pcib0: slot 29 INTC hardwired to IRQ 18
found-> vendor=0x8086, dev=0x24de, revid=0x02
domain=0, bus=0, slot=29, func=3
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=5
map[20]: type I/O Port, range 32, base 0x2060, size 5, enabled
pcib0: matched entry for 0.29.INTA
pcib0: slot 29 INTA hardwired to IRQ 16
found-> vendor=0x8086, dev=0x24dd, revid=0x02
domain=0, bus=0, slot=29, func=7
class=0c-03-20, hdrtype=0x00, mfdev=0
cmdreg=0x0106, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=d, irq=5
powerspec 2 supports D0 D3 current D0
map[10]: type Memory, range 32, base 0xfbef0000, size 10, enabled
pcib0: matched entry for 0.29.INTD
pcib0: slot 29 INTD hardwired to IRQ 23
found-> vendor=0x8086, dev=0x244e, revid=0xc2
domain=0, bus=0, slot=30, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0147, statreg=0x0080, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x24d0, revid=0x02
domain=0, bus=0, slot=31, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x014f, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x24db, revid=0x02
domain=0, bus=0, slot=31, func=1
class=01-01-8a, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0288, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=255
map[20]: type I/O Port, range 32, base 0x500, size 4, enabled
map[24]: type Memory, range 32, base 0, size 10, memory disabled
pcib1: <ACPI PCI-PCI bridge> at device 2.0 on pci0
pcib1: domain 0
pcib1: secondary bus 2
pcib1: subordinate bus 4
pcib1: I/O decode 0x4000-0x4fff
pcib1: memory decode 0xfdd00000-0xfdefffff
pcib1: no prefetched decode
pci2: <ACPI PCI bus> on pcib1
pci2: domain=0, physical bus=2
found-> vendor=0x8086, dev=0x0329, revid=0x09
domain=0, bus=2, slot=0, func=0
class=06-04-00, hdrtype=0x01, mfdev=1
cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns)
powerspec 2 supports D0 D3 current D0
MSI supports 1 message, 64 bit
found-> vendor=0x8086, dev=0x032a, revid=0x09
domain=0, bus=2, slot=0, func=2
class=06-04-00, hdrtype=0x01, mfdev=1
cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns)
powerspec 2 supports D0 D3 current D0
MSI supports 1 message, 64 bit
pcib2: <ACPI PCI-PCI bridge> at device 0.0 on pci2
pcib2: domain 0
pcib2: secondary bus 3
pcib2: subordinate bus 3
pcib2: I/O decode 0xf000-0xfff
pcib2: memory decode 0xfdd00000-0xfddfffff
pcib2: no prefetched decode
pci3: <ACPI PCI bus> on pcib2
pci3: domain=0, physical bus=3
found-> vendor=0x14e4, dev=0x1648, revid=0x10
domain=0, bus=3, slot=1, func=0
class=02-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0156, statreg=0x02b0, cachelnsz=16 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x40 (16000 ns), maxlat=0x00 (0 ns)
intpin=a, irq=5
powerspec 2 supports D0 D3 current D0
MSI supports 8 messages, 64 bit
map[10]: type Memory, range 64, base 0xfddf0000, size 16, enabled
pcib2: requested memory range 0xfddf0000-0xfddfffff: good
pcib1: requested memory range 0xfddf0000-0xfddfffff: good
pcib2: matched entry for 3.1.INTA
pcib2: slot 1 INTA hardwired to IRQ 25
found-> vendor=0x14e4, dev=0x1648, revid=0x10
domain=0, bus=3, slot=1, func=1
class=02-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0156, statreg=0x02b0, cachelnsz=16 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x40 (16000 ns), maxlat=0x00 (0 ns)
intpin=b, irq=5
powerspec 2 supports D0 D3 current D0
MSI supports 8 messages, 64 bit
map[10]: type Memory, range 64, base 0xfdde0000, size 16, enabled
pcib2: requested memory range 0xfdde0000-0xfddeffff: good
pcib1: requested memory range 0xfdde0000-0xfddeffff: good
pcib2: matched entry for 3.1.INTB
pcib2: slot 1 INTB hardwired to IRQ 26
pci0:3:1:0: bad VPD cksum, remain 19
bge0: <HP NC7782 Gigabit Server Adapter, ASIC rev. 0x002100> mem 0xfddf0000-0xfddfffff irq 25 at device 1.0 on pci3
bge0: CHIP ID 0x00002100; ASIC REV 0x02; CHIP REV 0x21; PCI-X
miibus0: <MII bus> on bge0
brgphy0: <BCM5704 10/100/1000baseTX PHY> PHY 1 on miibus0
brgphy0: OUI 0x000818, model 0x0019, rev. 0
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
bge0: bpf attached
bge0: Ethernet address: 00:18:fe:70:86:d5
ioapic1: routing intpin 1 (PCI IRQ 25) to lapic 0 vector 49
bge0: [MPSAFE]
bge0: [ITHREAD]
pci0:3:1:1: bad VPD cksum, remain 19
bge1: <HP NC7782 Gigabit Server Adapter, ASIC rev. 0x002100> mem 0xfdde0000-0xfddeffff irq 26 at device 1.1 on pci3
bge1: CHIP ID 0x00002100; ASIC REV 0x02; CHIP REV 0x21; PCI-X
miibus1: <MII bus> on bge1
brgphy1: <BCM5704 10/100/1000baseTX PHY> PHY 1 on miibus1
brgphy1: OUI 0x000818, model 0x0019, rev. 0
brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
bge1: bpf attached
bge1: Ethernet address: 00:18:fe:70:86:d4
ioapic1: routing intpin 2 (PCI IRQ 26) to lapic 0 vector 50
bge1: [MPSAFE]
bge1: [ITHREAD]
pcib3: <ACPI PCI-PCI bridge> at device 0.2 on pci2
pcib3: domain 0
pcib3: secondary bus 4
pcib3: subordinate bus 4
pcib3: I/O decode 0x4000-0x4fff
pcib3: memory decode 0xfde00000-0xfdefffff
pcib3: no prefetched decode
pci4: <ACPI PCI bus> on pcib3
pci4: domain=0, physical bus=4
found-> vendor=0x0e11, dev=0x0046, revid=0x01
domain=0, bus=4, slot=3, func=0
class=01-04-00, hdrtype=0x00, mfdev=0
cmdreg=0x0157, statreg=0x0230, cachelnsz=16 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=5
powerspec 2 supports D0 D1 D3 current D0
map[10]: type Memory, range 64, base 0xfdef0000, size 13, enabled
pcib3: requested memory range 0xfdef0000-0xfdef1fff: good
pcib1: requested memory range 0xfdef0000-0xfdef1fff: good
map[18]: type I/O Port, range 32, base 0x4000, size 8, enabled
pcib3: requested I/O range 0x4000-0x40ff: in range
pcib1: requested I/O range 0x4000-0x40ff: in range
map[1c]: type Memory, range 64, base 0xfde80000, size 18, enabled
pcib3: requested memory range 0xfde80000-0xfdebffff: good
pcib1: requested memory range 0xfde80000-0xfdebffff: good
pcib3: matched entry for 4.3.INTA
pcib3: slot 3 INTA hardwired to IRQ 51
ciss0: <HP Smart Array 6i> port 0x4000-0x40ff mem 0xfdef0000-0xfdef1fff,0xfde80000-0xfdebffff irq 51 at device 3.0 on pci4
ciss0: PERFORMANT Transport
ciss0: got 0 MSI messages]
ioapic2: routing intpin 3 (PCI IRQ 51) to lapic 0 vector 51
ciss0: [MPSAFE]
ciss0: [ITHREAD]
ciss0: using 1024 of 1024 available commands
ciss0: firmware 2.84
ciss0: 2 SCSI channels
ciss0: signature 'CISS'
ciss0: valence 1
ciss0: supported I/O methods 0x80000006<simple,performant>
ciss0: active I/O method 0x5<performant>
ciss0: 4G page base 0x00000000
ciss0: interrupt coalesce delay 0us
ciss0: interrupt coalesce count 16
ciss0: max outstanding commands 1024
ciss0: bus types 0x4
ciss0: server name ''
ciss0: heartbeat 0x59
ciss0: 3 physical devices
ciss0: 1 logical drive
ciss0: logical drive (b0t0): RAID 1, 34304MB online
pcib4: <ACPI PCI-PCI bridge> at device 6.0 on pci0
pcib4: domain 0
pcib4: secondary bus 5
pcib4: subordinate bus 12
pcib4: I/O decode 0x5000-0x5fff
pcib4: memory decode 0xfdf00000-0xfdffffff
pcib4: no prefetched decode
pci5: <ACPI PCI bus> on pcib4
pci5: domain=0, physical bus=5
found-> vendor=0x8086, dev=0x0329, revid=0x09
domain=0, bus=5, slot=0, func=0
class=06-04-00, hdrtype=0x01, mfdev=1
cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns)
powerspec 2 supports D0 D3 current D0
MSI supports 1 message, 64 bit
found-> vendor=0x8086, dev=0x032a, revid=0x09
domain=0, bus=5, slot=0, func=2
class=06-04-00, hdrtype=0x01, mfdev=1
cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns)
powerspec 2 supports D0 D3 current D0
MSI supports 1 message, 64 bit
pcib5: <ACPI PCI-PCI bridge> at device 0.0 on pci5
pcib5: domain 0
pcib5: secondary bus 6
pcib5: subordinate bus 9
pcib5: I/O decode 0x5000-0x5fff
pcib5: memory decode 0xfdf00000-0xfdffffff
pcib5: no prefetched decode
pci6: <ACPI PCI bus> on pcib5
pci6: domain=0, physical bus=6
found-> vendor=0x1000, dev=0x0030, revid=0x07
domain=0, bus=6, slot=1, func=0
class=01-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0157, statreg=0x0230, cachelnsz=16 (dwords)
lattimer=0x48 (2160 ns), mingnt=0x10 (4000 ns), maxlat=0x06 (1500 ns)
intpin=a, irq=5
powerspec 2 supports D0 D1 D2 D3 current D0
MSI supports 1 message, 64 bit
map[10]: type I/O Port, range 32, base 0x5000, size 8, enabled
pcib5: requested I/O range 0x5000-0x50ff: in range
pcib4: requested I/O range 0x5000-0x50ff: in range
map[14]: type Memory, range 64, base 0xfdfe0000, size 17, enabled
pcib5: requested memory range 0xfdfe0000-0xfdffffff: good
pcib4: requested memory range 0xfdfe0000-0xfdffffff: good
map[1c]: type Memory, range 64, base 0xfdfc0000, size 17, enabled
pcib5: requested memory range 0xfdfc0000-0xfdfdffff: good
pcib4: requested memory range 0xfdfc0000-0xfdfdffff: good
pcib5: matched entry for 6.1.INTA
pcib5: slot 1 INTA hardwired to IRQ 74
found-> vendor=0x103c, dev=0x3220, revid=0x00
domain=0, bus=6, slot=2, func=0
class=01-04-00, hdrtype=0x00, mfdev=0
cmdreg=0x0157, statreg=0x0230, cachelnsz=16 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=5
powerspec 2 supports D0 D1 D3 current D0
map[10]: type Memory, range 64, base 0xfdfb0000, size 13, enabled
pcib5: requested memory range 0xfdfb0000-0xfdfb1fff: good
pcib4: requested memory range 0xfdfb0000-0xfdfb1fff: good
map[18]: type I/O Port, range 32, base 0x5400, size 8, enabled
pcib5: requested I/O range 0x5400-0x54ff: in range
pcib4: requested I/O range 0x5400-0x54ff: in range
map[1c]: type Memory, range 64, base 0xfdf40000, size 18, enabled
pcib5: requested memory range 0xfdf40000-0xfdf7ffff: good
pcib4: requested memory range 0xfdf40000-0xfdf7ffff: good
pcib5: matched entry for 6.2.INTA
pcib5: slot 2 INTA hardwired to IRQ 78
mpt0: <LSILogic 1030 Ultra4 Adapter> port 0x5000-0x50ff mem 0xfdfe0000-0xfdffffff,0xfdfc0000-0xfdfdffff irq 74 at device 1.0 on pci6
ioapic3: routing intpin 2 (PCI IRQ 74) to lapic 0 vector 52
mpt0: [MPSAFE]
mpt0: [ITHREAD]
mpt0: MPI Version=1.2.14.0
mpt0: No Handlers For Any Event Notify Frames. Event 0xa (ACK not required).
mpt0: No Handlers For Any Event Notify Frames. Event 0xa (ACK not required).
ciss1: <HP Smart Array P600> port 0x5400-0x54ff mem 0xfdfb0000-0xfdfb1fff,0xfdf40000-0xfdf7ffff irq 78 at device 2.0 on pci6
ciss1: PERFORMANT Transport
ciss1: got 0 MSI messages]
ioapic3: routing intpin 6 (PCI IRQ 78) to lapic 0 vector 53
ciss1: [MPSAFE]
ciss1: [ITHREAD]
ciss1: using 1024 of 1024 available commands
ciss1: firmware 2.04
ciss1: 2 SCSI channels
ciss1: signature 'CISS'
ciss1: valence 3
ciss1: supported I/O methods 0x80000006<simple,performant>
ciss1: active I/O method 0x5<performant>
ciss1: 4G page base 0x00000000
ciss1: interrupt coalesce delay 0us
ciss1: interrupt coalesce count 16
ciss1: max outstanding commands 1024
ciss1: bus types 0x200000
ciss1: server name ''
ciss1: heartbeat 0x85
ciss1: 0 physical devices
ciss1: 0 logical drives
pcib6: <ACPI PCI-PCI bridge> at device 0.2 on pci5
pcib6: domain 0
pcib6: secondary bus 10
pcib6: subordinate bus 12
pcib6: I/O decode 0xf000-0xfff
pcib6: no prefetched decode
pci10: <ACPI PCI bus> on pcib6
pci10: domain=0, physical bus=10
uhci0: <Intel 82801EB (ICH5) USB controller USB-A> port 0x2000-0x201f irq 16 at device 29.0 on pci0
ioapic0: routing intpin 16 (PCI IRQ 16) to lapic 0 vector 54
uhci0: [MPSAFE]
uhci0: [ITHREAD]
usbus0: <Intel 82801EB (ICH5) USB controller USB-A> on uhci0
uhci1: <Intel 82801EB (ICH5) USB controller USB-B> port 0x2020-0x203f irq 19 at device 29.1 on pci0
ioapic0: routing intpin 19 (PCI IRQ 19) to lapic 0 vector 55
uhci1: [MPSAFE]
uhci1: [ITHREAD]
usbus1: <Intel 82801EB (ICH5) USB controller USB-B> on uhci1
uhci2: <Intel 82801EB (ICH5) USB controller USB-C> port 0x2040-0x205f irq 18 at device 29.2 on pci0
ioapic0: routing intpin 18 (PCI IRQ 18) to lapic 0 vector 56
uhci2: [MPSAFE]
uhci2: [ITHREAD]
usbus2: <Intel 82801EB (ICH5) USB controller USB-C> on uhci2
uhci3: <Intel 82801EB (ICH5) USB controller USB-D> port 0x2060-0x207f irq 16 at device 29.3 on pci0
uhci3: [MPSAFE]
uhci3: [ITHREAD]
usbus3: <Intel 82801EB (ICH5) USB controller USB-D> on uhci3
ehci0: <Intel 82801EB/R (ICH5) USB 2.0 controller> mem 0xfbef0000-0xfbef03ff irq 23 at device 29.7 on pci0
ioapic0: routing intpin 23 (PCI IRQ 23) to lapic 0 vector 57
ehci0: [MPSAFE]
ehci0: [ITHREAD]
usbus4: EHCI version 1.0
usbus4: <Intel 82801EB/R (ICH5) USB 2.0 controller> on ehci0
pcib7: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pcib7: domain 0
pcib7: secondary bus 1
pcib7: subordinate bus 1
pcib7: I/O decode 0x1000-0x3fff
pcib7: memory decode 0xfbf00000-0xfcffffff
pcib7: no prefetched decode
pcib7: Subtractively decoded bridge.
pci1: <ACPI PCI bus> on pcib7
pci1: domain=0, physical bus=1
found-> vendor=0x1002, dev=0x4752, revid=0x27
domain=0, bus=1, slot=3, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0087, statreg=0x0290, cachelnsz=16 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns)
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type Memory, range 32, base 0xfc000000, size 24, enabled
pcib7: requested memory range 0xfc000000-0xfcffffff: good
map[14]: type I/O Port, range 32, base 0x3000, size 8, enabled
pcib7: requested I/O range 0x3000-0x30ff: in range
map[18]: type Memory, range 32, base 0xfbff0000, size 12, enabled
pcib7: requested memory range 0xfbff0000-0xfbff0fff: good
found-> vendor=0x0e11, dev=0xb203, revid=0x01
domain=0, bus=1, slot=4, func=0
class=08-80-00, hdrtype=0x00, mfdev=1
cmdreg=0x0103, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=5
powerspec 2 supports D0 D3 current D0
map[10]: type I/O Port, range 32, base 0x1800, size 8, enabled
pcib7: requested I/O range 0x1800-0x18ff: in range
map[14]: type Memory, range 32, base 0xfbfe0000, size 9, enabled
pcib7: requested memory range 0xfbfe0000-0xfbfe01ff: good
pcib7: matched entry for 1.4.INTA
pcib7: slot 4 INTA hardwired to IRQ 21
found-> vendor=0x0e11, dev=0xb204, revid=0x01
domain=0, bus=1, slot=4, func=2
class=08-80-00, hdrtype=0x00, mfdev=1
cmdreg=0x0197, statreg=0x0290, cachelnsz=16 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=5
powerspec 2 supports D0 D3 current D0
map[10]: type I/O Port, range 32, base 0x3400, size 8, enabled
pcib7: requested I/O range 0x3400-0x34ff: in range
map[14]: type Memory, range 32, base 0xfbfd0000, size 11, enabled
pcib7: requested memory range 0xfbfd0000-0xfbfd07ff: good
map[18]: type Memory, range 32, base 0xfbfc0000, size 13, enabled
pcib7: requested memory range 0xfbfc0000-0xfbfc1fff: good
map[1c]: type Memory, range 32, base 0xfbf00000, size 19, enabled
pcib7: requested memory range 0xfbf00000-0xfbf7ffff: good
pcib7: matched entry for 1.4.INTB
pcib7: slot 4 INTB hardwired to IRQ 22
vgapci0: <VGA-compatible display> port 0x3000-0x30ff mem 0xfc000000-0xfcffffff,0xfbff0000-0xfbff0fff at device 3.0 on pci1
pci1: <base peripheral> at device 4.0 (no driver attached)
pci1: <base peripheral> at device 4.2 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH5 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x500-0x50f at device 31.1 on pci0
ata0: <ATA channel 0> on atapci0
ata0: reset tp1 mask=03 ostat0=50 ostat1=00
ata0: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb
ata0: stat1=0x00 err=0x00 lsb=0x00 msb=0x00
ata0: reset tp2 stat0=00 stat1=00 devices=0x10000
ioapic0: routing intpin 14 (ISA IRQ 14) to lapic 0 vector 58
ata0: [MPSAFE]
ata0: [ITHREAD]
ata1: <ATA channel 1> on atapci0
ata1: reset tp1 mask=03 ostat0=00 ostat1=00
ata1: stat0=0x01 err=0x01 lsb=0x01 msb=0x01
ata1: stat1=0x01 err=0x01 lsb=0x01 msb=0x01
ata1: reset tp2 stat0=01 stat1=01 devices=0x0
ioapic0: routing intpin 15 (ISA IRQ 15) to lapic 0 vector 59
ata1: [MPSAFE]
ata1: [ITHREAD]
acpi_tz0: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0065
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
ioapic0: routing intpin 1 (ISA IRQ 1) to lapic 0 vector 60
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: unable to allocate IRQ
psmcpnp0: <PS/2 mouse port> irq 12 on acpi0
psm0: current command byte:0065
psm0: <PS/2 Mouse> irq 12 on atkbdc0
ioapic0: routing intpin 12 (ISA IRQ 12) to lapic 0 vector 61
psm0: [GIANT-LOCKED]
psm0: [ITHREAD]
psm0: model Generic PS/2 mouse, device ID 0-00, 2 buttons
psm0: config:00000000, flags:00000008, packet size:3
psm0: syncmask:c0, syncbits:00
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
ioapic0: routing intpin 4 (ISA IRQ 4) to lapic 0 vector 62
uart0: [FILTER]
uart0: fast interrupt
fdc0: <floppy drive controller (FDE)> port 0x3f2-0x3f5 irq 6 drq 2 on acpi0
fdc0: ic_type 90 part_id 73
ioapic0: routing intpin 6 (ISA IRQ 6) to lapic 0 vector 63
fdc0: [FILTER]
ex_isa_identify()
pnp_identify: Trying Read_Port at 203
pnp_identify: Trying Read_Port at 243
pnp_identify: Trying Read_Port at 283
pnp_identify: Trying Read_Port at 2c3
pnp_identify: Trying Read_Port at 303
pnp_identify: Trying Read_Port at 343
pnp_identify: Trying Read_Port at 383
pnp_identify: Trying Read_Port at 3c3
PNP Identify complete
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed 0
unknown: status reg test failed f0
unknown: status reg test failed ff
unknown: status reg test failed ff
ahc_isa_probe 0: ioport 0xc00 alloc failed
isa_probe_children: disabling PnP devices
pmtimer0 on isa0
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
atkbdc: atkbdc0 already exists; skipping it
fdc: fdc0 already exists; skipping it
sc: sc0 already exists; skipping it
uart: uart0 already exists; skipping it
isa_probe_children: probing non-PnP devices
orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xcbfff,0xcc000-0xcc7ff,0xcc800-0xd07ff,0xee000-0xeffff pnpid ORM0000 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd1, terminal emulator: scteken (teken terminal)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
atrtc0: <AT Real Time Clock> at port 0x70 irq 8 on isa0
atrtc0: registered as a time-of-day clock (resolution 1000000us)
ppc0: parallel port not found.
ppc0: <Parallel port> failed to probe at irq 7 on isa0
uart1: <ns8250> failed to probe at port 0x2f8-0x2ff irq 3 on isa0
isa_probe_children: probing PnP devices
p4tcc0: <CPU Frequency Thermal Control> on cpu0
p4tcc1: <CPU Frequency Thermal Control> on cpu1
Device configuration finished.
Reducing kern.maxvnodes 230421 -> 100000
procfs registered
lapic: Divisor 2, Frequency 100003947 Hz
ioapic0: routing intpin 8 (ISA IRQ 8) to lapic 0 vector 64
Timecounter "TSC" frequency 3000118380 Hz quality -100
Timecounters tick every 1.000 msec
vlan: initialized, using hash tables with chaining
lo0: bpf attached
hptrr: no controller detected.
ata0: Identifying devices: 00010000
ata0: New devices: 00010000
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 12Mbps Full Speed USB v1.0
usbus3: 12Mbps Full Speed USB v1.0
usbus4: 480Mbps High Speed USB v2.0
ugen0.1: <Intel> at usbus0
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <Intel> at usbus1
uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen2.1: <Intel> at usbus2
uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
ugen3.1: <Intel> at usbus3
uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
ugen4.1: <Intel> at usbus4
uhub4: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus4
fdc0: output ready timeout
fdc0: output ready timeout
fdc0: output ready timeout
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
uhub3: 2 ports with 2 removable, self powered
fdc0: output ready timeout
fdc0: output ready timeout
fdc0: output ready timeout
fdc0: output ready timeout
ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA33 cable=80 wire
acd0: setting UDMA33
acd0: <TSSTcorpCD-ROM TS-L162C/N204> CDROM drive at ata0 as master
acd0: read 4134KB/s (4134KB/s), 96KB buffer, UDMA33
acd0: Reads: CDR, CDRW, CDDA stream, packet
acd0: Writes:
acd0: Audio: play, 255 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: no/blank disc
ata1: Identifying devices: 00000000
ata1: New devices: 00000000
(noperiph:mpt0:0:-1:-1): reset bus
fdc0: output ready timeout
fdc0: input ready timeout
fdc0: output ready timeout
fdc0: input ready timeout
fdc0: output ready timeout
fdc0: input ready timeout
fdc0: output ready timeout
fdc0: input ready timeout
uhub4: 8 ports with 8 removable, self powered
ugen3.2: <vendor 0x192f> at usbus3
ums0: <vendor 0x192f USB Optical Mouse, class 0/0, rev 2.00/2.00, addr 2> on usbus3
ums0: 3 buttons and [XYZ] coordinates ID=0
ugen3.3: <Innovace> at usbus3
ukbd0: <Innovace HP Wire Keyboard Kit, class 0/0, rev 1.10/2.04, addr 3> on usbus3
kbd2 at ukbd0
kbd2: ukbd0, generic (0), config:0x0, flags:0x3d0000
uhid0: <Innovace HP Wire Keyboard Kit, class 0/0, rev 1.10/2.04, addr 3> on usbus3
pass0 at ciss0 bus 0 scbus0 target 0 lun 0
pass0: <COMPAQ RAID 1 VOLUME OK> Fixed Direct Access SCSI-4 device
pass0: 135.168MB/s transfers
pass0: Command Queueing enabled
da0 at ciss0 bus 0 scbus0 target 0 lun 0
da0: <COMPAQ RAID 1 VOLUME OK> Fixed Direct Access SCSI-4 device
da0: 135.168MB/s transfers
da0: Command Queueing enabled
da0: 34727MB (71122560 512 byte sectors: 255H 32S/T 8716C)
GEOM: new disk da0
ATA PseudoRAID loaded
SMP: AP CPU #1 Launched!
cpu1 AP:
ID: 0x06000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000200ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400
ioapic0: routing intpin 4 (ISA IRQ 4) to lapic 6 vector 48
ioapic0: routing intpin 8 (ISA IRQ 8) to lapic 6 vector 49
ioapic0: routing intpin 12 (ISA IRQ 12) to lapic 6 vector 50
ioapic0: routing intpin 15 (ISA IRQ 15) to lapic 6 vector 51
ioapic0: routing intpin 18 (PCI IRQ 18) to lapic 6 vector 52
ioapic0: routing intpin 23 (PCI IRQ 23) to lapic 6 vector 53
ioapic1: routing intpin 2 (PCI IRQ 26) to lapic 6 vector 54
ioapic3: routing intpin 2 (PCI IRQ 74) to lapic 6 vector 55
WARNING: WITNESS option enabled, expect reduced performance.
Trying to mount root from ufs:/dev/da0s1a
ct_to_ts([2010-05-06 10:39:27]) = 1273142367.000000000
start_init: trying /sbin/init
bge0:
bge0: link state changed to UP
link UP
And pciconf
hostb0 at pci0:0:0:0: class=0x060000 card=0x32000e11 chip=0x35908086 rev=0x0c hdr=0x00
vendor = 'Intel Corporation'
device = 'E7520 Server Memory Controller Hub'
class = bridge
subclass = HOST-PCI
pcib1 at pci0:0:2:0: class=0x060400 card=0x00000000 chip=0x35958086 rev=0x0c hdr=0x01
vendor = 'Intel Corporation'
device = 'E752x Memory Controller Hub PCIe Port A0'
class = bridge
subclass = PCI-PCI
pcib4 at pci0:0:6:0: class=0x060400 card=0x00000000 chip=0x35998086 rev=0x0c hdr=0x01
vendor = 'Intel Corporation'
device = 'E752x Memory Controller Hub PCIe Port C0'
class = bridge
subclass = PCI-PCI
uhci0 at pci0:0:29:0: class=0x0c0300 card=0x32010e11 chip=0x24d28086 rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '82801EB/ER (ICH5/ICH5R) USB UHCI Controller *1'
class = serial bus
subclass = USB
uhci1 at pci0:0:29:1: class=0x0c0300 card=0x32010e11 chip=0x24d48086 rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '82801EB/ER (ICH5/ICH5R) USB UHCI Controller *2'
class = serial bus
subclass = USB
uhci2 at pci0:0:29:2: class=0x0c0300 card=0x32010e11 chip=0x24d78086 rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '82801EB/ER (ICH5/ICH5R) USB UHCI Controller *3'
class = serial bus
subclass = USB
uhci3 at pci0:0:29:3: class=0x0c0300 card=0x32010e11 chip=0x24de8086 rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '82801EB/ER (ICH5/ICH5R) USB UHCI Controller *4'
class = serial bus
subclass = USB
ehci0 at pci0:0:29:7: class=0x0c0320 card=0x32010e11 chip=0x24dd8086 rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '82801EB/ER (ICH5/ICH5R) USB 2.0 EHCI Controller'
class = serial bus
subclass = USB
pcib7 at pci0:0:30:0: class=0x060400 card=0x00000000 chip=0x244e8086 rev=0xc2 hdr=0x01
vendor = 'Intel Corporation'
device = '82801 Family (ICH2/3/4/5/6/7/8/9,63xxESB) Hub Interface to PCI Bridge'
class = bridge
subclass = PCI-PCI
isab0 at pci0:0:31:0: class=0x060100 card=0x00000000 chip=0x24d08086 rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '82801EB/ER (ICH5/ICH5R) LPC Interface Bridge'
class = bridge
subclass = PCI-ISA
atapci0 at pci0:0:31:1: class=0x01018a card=0x32010e11 chip=0x24db8086 rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '82801EB/ER (ICH5/ICH5R) EIDE Controller'
class = mass storage
subclass = ATA
pcib2 at pci0:2:0:0: class=0x060400 card=0x00000000 chip=0x03298086 rev=0x09 hdr=0x01
vendor = 'Intel Corporation'
device = 'PCI Express-to-PCI Express Bridge A (6700PXH)'
class = bridge
subclass = PCI-PCI
pcib3 at pci0:2:0:2: class=0x060400 card=0x00000000 chip=0x032a8086 rev=0x09 hdr=0x01
vendor = 'Intel Corporation'
device = 'PCI Express-to-PCI Express Bridge B (6700PXH)'
class = bridge
subclass = PCI-PCI
bge0 at pci0:3:1:0: class=0x020000 card=0x00d00e11 chip=0x164814e4 rev=0x10 hdr=0x00
vendor = 'Broadcom Corporation'
device = 'NetXtreme Dual Gigabit Adapter (BCM5704)'
class = network
subclass = ethernet
bge1 at pci0:3:1:1: class=0x020000 card=0x00d00e11 chip=0x164814e4 rev=0x10 hdr=0x00
vendor = 'Broadcom Corporation'
device = 'NetXtreme Dual Gigabit Adapter (BCM5704)'
class = network
subclass = ethernet
ciss0 at pci0:4:3:0: class=0x010400 card=0x40910e11 chip=0x00460e11 rev=0x01 hdr=0x00
vendor = 'Compaq Computer Corp (Now owned by Hewlett-Packard)'
device = 'Smart Array 6400 Controller (N/A)'
class = mass storage
subclass = RAID
pcib5 at pci0:5:0:0: class=0x060400 card=0x00000000 chip=0x03298086 rev=0x09 hdr=0x01
vendor = 'Intel Corporation'
device = 'PCI Express-to-PCI Express Bridge A (6700PXH)'
class = bridge
subclass = PCI-PCI
pcib6 at pci0:5:0:2: class=0x060400 card=0x00000000 chip=0x032a8086 rev=0x09 hdr=0x01
vendor = 'Intel Corporation'
device = 'PCI Express-to-PCI Express Bridge B (6700PXH)'
class = bridge
subclass = PCI-PCI
mpt0 at pci0:6:1:0: class=0x010000 card=0x3108103c chip=0x00301000 rev=0x07 hdr=0x00
vendor = 'LSI Logic (Was: Symbios Logic, NCR)'
device = 'PCI-X to Ultra320 SCSI Controller (LSI53C1020/1030)'
class = mass storage
subclass = SCSI
ciss1 at pci0:6:2:0: class=0x010400 card=0x3225103c chip=0x3220103c rev=0x00 hdr=0x00
vendor = 'Hewlett-Packard Company'
device = 'P600 SmartArray Raid Controller (P600)'
class = mass storage
subclass = RAID
vgapci0 at pci0:1:3:0: class=0x030000 card=0x001e0e11 chip=0x47521002 rev=0x27 hdr=0x00
vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.'
device = 'ATI On-Board VGA for HP Proliant 350 G3 (Rage XL PCI)'
class = display
subclass = VGA
none0 at pci0:1:4:0: class=0x088000 card=0xb2060e11 chip=0xb2030e11 rev=0x01 hdr=0x00
vendor = 'Compaq Computer Corp (Now owned by Hewlett-Packard)'
device = 'Integrated Lights Out Processor (iLo)'
class = base peripheral
none1 at pci0:1:4:2: class=0x088000 card=0xb2060e11 chip=0xb2040e11 rev=0x01 hdr=0x00
vendor = 'Compaq Computer Corp (Now owned by Hewlett-Packard)'
device = 'Integrated Lights Out Processor (iLo)'
class = base peripheral
--
Regards, Ulf.
---------------------------------------------------------------------
Ulf Zimmermann, 1525 Pacific Ave., Alameda, CA-94501, #: 510-865-0204
You can find my resume at: http://www.Alameda.net/~ulf/resume.html
More information about the freebsd-scsi
mailing list