kern/146287: [ciss] ciss(4) cannot see more than one SmartArray
controller
Scott Long
scottl at samsco.org
Tue May 4 19:15:24 UTC 2010
Thanks. I see 2 ILO devices, 1 CISS device, and a handful of other various PCI bridges and devices. Either your extra missing controllers are on an exotic topology that freebsd can't probe, or there is some other kind of confusion. Either way, FreeBSD itself doesn't see any trace of them.
Scott
On May 4, 2010, at 1:01 PM, Per olof Ljungmark wrote:
>>
>>
>
> Yes, there is zero problem with the first, the 6i:
>
> pciconf -lv
> hostb0 at pci0:0:0:0: class=0x060000 card=0x32000e11 chip=0x35908086
> rev=0x0c hdr=0x00
> vendor = 'Intel Corporation'
> device = 'E7520 Server Memory Controller Hub'
> class = bridge
> subclass = HOST-PCI
> pcib1 at pci0:0:2:0: class=0x060400 card=0x00000000 chip=0x35958086
> rev=0x0c hdr=0x01
> vendor = 'Intel Corporation'
> device = 'E752x Memory Controller Hub PCIe Port A0'
> class = bridge
> subclass = PCI-PCI
> pcib4 at pci0:0:6:0: class=0x060400 card=0x00000000 chip=0x35998086
> rev=0x0c hdr=0x01
> vendor = 'Intel Corporation'
> device = 'E752x Memory Controller Hub PCIe Port C0'
> class = bridge
> subclass = PCI-PCI
> uhci0 at pci0:0:29:0: class=0x0c0300 card=0x32010e11 chip=0x24d28086
> rev=0x02 hdr=0x00
> vendor = 'Intel Corporation'
> device = '82801EB/ER (ICH5/ICH5R) USB UHCI Controller *1'
> class = serial bus
> subclass = USB
> uhci1 at pci0:0:29:1: class=0x0c0300 card=0x32010e11 chip=0x24d48086
> rev=0x02 hdr=0x00
> vendor = 'Intel Corporation'
> device = '82801EB/ER (ICH5/ICH5R) USB UHCI Controller *2'
> class = serial bus
> subclass = USB
> uhci2 at pci0:0:29:2: class=0x0c0300 card=0x32010e11 chip=0x24d78086
> rev=0x02 hdr=0x00
> vendor = 'Intel Corporation'
> device = '82801EB/ER (ICH5/ICH5R) USB UHCI Controller *3'
> class = serial bus
> subclass = USB
> uhci3 at pci0:0:29:3: class=0x0c0300 card=0x32010e11 chip=0x24de8086
> rev=0x02 hdr=0x00
> vendor = 'Intel Corporation'
> device = '82801EB/ER (ICH5/ICH5R) USB UHCI Controller *4'
> class = serial bus
> subclass = USB
> ehci0 at pci0:0:29:7: class=0x0c0320 card=0x32010e11 chip=0x24dd8086
> rev=0x02 hdr=0x00
> vendor = 'Intel Corporation'
> device = '82801EB/ER (ICH5/ICH5R) USB 2.0 EHCI Controller'
> class = serial bus
> subclass = USB
> pcib8 at pci0:0:30:0: class=0x060400 card=0x00000000 chip=0x244e8086
> rev=0xc2 hdr=0x01
> vendor = 'Intel Corporation'
> device = '82801 Family (ICH2/3/4/5/6/7/8/9,63xxESB) Hub
> Interface to PCI Bridge'
> class = bridge
> subclass = PCI-PCI
> isab0 at pci0:0:31:0: class=0x060100 card=0x00000000 chip=0x24d08086
> rev=0x02 hdr=0x00
> vendor = 'Intel Corporation'
> device = '82801EB/ER (ICH5/ICH5R) LPC Interface Bridge'
> class = bridge
> subclass = PCI-ISA
> atapci0 at pci0:0:31:1: class=0x01018a card=0x32010e11 chip=0x24db8086
> rev=0x02 hdr=0x00
> vendor = 'Intel Corporation'
> device = '82801EB/ER (ICH5/ICH5R) EIDE Controller'
> class = mass storage
> subclass = ATA
> pcib2 at pci0:2:0:0: class=0x060400 card=0x00000000 chip=0x03298086
> rev=0x09 hdr=0x01
> vendor = 'Intel Corporation'
> device = 'PCI Express-to-PCI Express Bridge A (6700PXH)'
> class = bridge
> subclass = PCI-PCI
> pcib3 at pci0:2:0:2: class=0x060400 card=0x00000000 chip=0x032a8086
> rev=0x09 hdr=0x01
> vendor = 'Intel Corporation'
> device = 'PCI Express-to-PCI Express Bridge B (6700PXH)'
> class = bridge
> subclass = PCI-PCI
> bge0 at pci0:3:1:0: class=0x020000 card=0x00d00e11 chip=0x164814e4
> rev=0x10 hdr=0x00
> vendor = 'Broadcom Corporation'
> device = 'NetXtreme Dual Gigabit Adapter (BCM5704)'
> class = network
> subclass = ethernet
> bge1 at pci0:3:1:1: class=0x020000 card=0x00d00e11 chip=0x164814e4
> rev=0x10 hdr=0x00
> vendor = 'Broadcom Corporation'
> device = 'NetXtreme Dual Gigabit Adapter (BCM5704)'
> class = network
> subclass = ethernet
> ciss0 at pci0:4:3:0: class=0x010400 card=0x40910e11 chip=0x00460e11
> rev=0x01 hdr=0x00
> vendor = 'Compaq Computer Corp (Now owned by Hewlett-Packard)'
> device = 'Smart Array 64xx/6i Controller'
> class = mass storage
> subclass = RAID
> pcib5 at pci0:5:0:0: class=0x060400 card=0x00000000 chip=0x03298086
> rev=0x09 hdr=0x01
> vendor = 'Intel Corporation'
> device = 'PCI Express-to-PCI Express Bridge A (6700PXH)'
> class = bridge
> subclass = PCI-PCI
> pcib7 at pci0:5:0:2: class=0x060400 card=0x00000000 chip=0x032a8086
> rev=0x09 hdr=0x01
> vendor = 'Intel Corporation'
> device = 'PCI Express-to-PCI Express Bridge B (6700PXH)'
> class = bridge
> subclass = PCI-PCI
> pcib6 at pci0:6:2:0: class=0x060400 card=0x00000000 chip=0x01a71014
> rev=0x02 hdr=0x01
> vendor = 'International Business Machines Corp.'
> device = 'PCI-X Bridge R1.1 (IBM 133)'
> class = bridge
> subclass = PCI-PCI
> vgapci0 at pci0:1:3:0: class=0x030000 card=0x001e0e11 chip=0x47521002
> rev=0x27 hdr=0x00
> vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.'
> device = 'ATI On-Board VGA for HP Proliant 350 G3 (Rage XL PCI)'
> class = display
> subclass = VGA
> none0 at pci0:1:4:0: class=0x088000 card=0xb2060e11 chip=0xb2030e11
> rev=0x01 hdr=0x00
> vendor = 'Compaq Computer Corp (Now owned by Hewlett-Packard)'
> device = 'Integrated Lights Out Processor (iLo)'
> class = base peripheral
> none1 at pci0:1:4:2: class=0x088000 card=0xb2060e11 chip=0xb2040e11
> rev=0x01 hdr=0x00
> vendor = 'Compaq Computer Corp (Now owned by Hewlett-Packard)'
> device = 'Integrated Lights Out Processor (iLo)'
> class = base peripheral
>
>
>> On May 4, 2010, at 12:00 PM, Per olof Ljungmark wrote:
>>
>>> The following reply was made to PR kern/146287; it has been noted by GNATS.
>>>
>>> From: Per olof Ljungmark <peo at intersonic.se>
>>> To: bug-followup at FreeBSD.org, peo at intersonic.se
>>> Cc: seanbru at yahoo-inc.com
>>> Subject: Re: kern/146287: [ciss] ciss(4) cannot see more than one SmartArray
>>> controller
>>> Date: Tue, 04 May 2010 19:56:19 +0200
>>>
>>> Copyright (c) 1992-2009 The FreeBSD Project.
>>> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
>>> The Regents of the University of California. All rights reserved.
>>> FreeBSD is a registered trademark of The FreeBSD Foundation.
>>> FreeBSD 8.0-RELEASE-p2 #0: Tue May 4 00:23:37 CEST 2010
>>> peo at lowell.i.inter-sonic.com:/usr/obj/usr/src/sys/GENERIC
>>> Preloaded elf kernel "/boot/kernel/kernel" at 0xffffffff80e1a000.
>>> Timecounter "i8254" frequency 1193182 Hz quality 0
>>> Calibrating TSC clock ... TSC clock: 3400136791 Hz
>>> CPU: Intel(R) Xeon(TM) CPU 3.40GHz (3400.14-MHz K8-class CPU)
>>> Origin = "GenuineIntel" Id = 0xf41 Stepping = 1
>>>
>>> Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
>>> Features2=0x649d<SSE3,DTES64,MON,DS_CPL,EST,CNXT-ID,CX16,xTPR>
>>> AMD Features=0x20000800<SYSCALL,LM>
>>> TSC: P-state invariant
>>> real memory = 12884901888 (12288 MB)
>>> Physical memory chunk(s):
>>> 0x0000000000001000 - 0x000000000009bfff, 634880 bytes (155 pages)
>>> 0x0000000000e51000 - 0x00000000dfff2fff, 3743031296 bytes (913826 pages)
>>> 0x0000000100000000 - 0x00000003049d6fff, 8667361280 bytes (2116055 pages)
>>> avail memory = 12349284352 (11777 MB)
>>> ACPI APIC Table: <HP 00000083>
>>> INTR: Adding local APIC 6 as a target
>>> FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
>>> FreeBSD/SMP: 2 package(s) x 1 core(s) x 2 HTT threads
>>> cpu0 (BSP): APIC ID: 0
>>> cpu1 (AP/HT): APIC ID: 1
>>> cpu2 (AP): APIC ID: 6
>>> cpu3 (AP/HT): APIC ID: 7
>>> APIC: CPU 0 has ACPI ID 0
>>> APIC: CPU 1 has ACPI ID 1
>>> APIC: CPU 2 has ACPI ID 6
>>> APIC: CPU 3 has ACPI ID 7
>>> ULE: setup cpu 0
>>> ULE: setup cpu 1
>>> ULE: setup cpu 2
>>> ULE: setup cpu 3
>>> ACPI: RSDP 0xf4f00 00024 (v2 HP )
>>> ACPI: XSDT 0xdfff3300 0004C (v1 HP P51 00000002 �\^D 0000162E)
>>> ACPI: FACP 0xdfff3380 000F4 (v3 HP P51 00000002 �\^D 0000162E)
>>> ACPI Warning: Invalid length for Pm1aControlBlock: 32, using default 16
>>> 20090521 tbfadt-707
>>> ACPI: DSDT 0xdfff3480 02DAB (v1 HP DSDT 00000001 INTL 20030228)
>>> ACPI: FACS 0xdfff3100 00040
>>> ACPI: SPCR 0xdfff3140 00050 (v1 HP SPCRRBSU 00000001 �\^D 0000162E)
>>> ACPI: MCFG 0xdfff31c0 0003C (v1 HP ProLiant 00000001 00000000)
>>> ACPI: APIC 0xdfff3200 000C2 (v1 HP 00000083 00000002 00000000)
>>> ACPI: SSDT 0xdfff8000 004C9 (v1 HP SSDTP 00000001 INTL 20030228)
>>> MADT: Found IO APIC ID 8, Interrupt 0 at 0xfec00000
>>> ioapic0: Routing external 8259A's -> intpin 0
>>> MADT: Found IO APIC ID 9, Interrupt 24 at 0xfec80000
>>> MADT: Found IO APIC ID 10, Interrupt 48 at 0xfec80400
>>> MADT: Found IO APIC ID 11, Interrupt 72 at 0xfec84000
>>> MADT: Found IO APIC ID 12, Interrupt 96 at 0xfec84400
>>> MADT: Interrupt override: source 0, irq 2
>>> ioapic0: Routing IRQ 0 -> intpin 2
>>> MADT: Interrupt override: source 9, irq 9
>>> ioapic0: intpin 9 trigger: level
>>> lapic: Routing NMI -> LINT1
>>> lapic: LINT1 trigger: edge
>>> lapic: LINT1 polarity: high
>>> ioapic0 <Version 2.0> irqs 0-23 on motherboard
>>> ioapic1 <Version 2.0> irqs 24-47 on motherboard
>>> ioapic2 <Version 2.0> irqs 48-71 on motherboard
>>> ioapic3 <Version 2.0> irqs 72-95 on motherboard
>>> ioapic4 <Version 2.0> irqs 96-119 on motherboard
>>> cpu0 BSP:
>>> ID: 0x00000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff
>>> lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
>>> timer: 0x000100ef therm: 0x00010000 err: 0x000100f0 pcm: 0x00010400
>>> wlan: <802.11 Link Layer>
>>> null: <null device, zero device>
>>> random: <entropy source, Software, Yarrow>
>>> nfslock: pseudo-device
>>> kbd: new array size 4
>>> kbd1 at kbdmux0
>>> mem: <memory>
>>> io: <I/O>
>>> hptrr: RocketRAID 17xx/2xxx SATA controller driver v1.2
>>> acpi0: <HP P51> on motherboard
>>> PCIe: Memory Mapped configuration base @ 0xe0000000
>>> ioapic0: routing intpin 9 (ISA IRQ 9) to lapic 0 vector 48
>>> acpi0: [MPSAFE]
>>> acpi0: [ITHREAD]
>>> acpi0: Power Button (fixed)
>>> acpi0: wakeup code va 0xffffff8000025000 pa 0x4000
>>> acpi_bus_number: root bus has no _BBN, assuming 0
>>> AcpiOsDerivePciId: \\_SB_.PCI0.CFG0.MEM0 -> bus 0 dev 0 func 0
>>> acpi_bus_number: root bus has no _BBN, assuming 0
>>> AcpiOsDerivePciId: \\_SB_.PCI0.PTC0.PCXC.SHP0 -> bus 5 dev 0 func 0
>>> acpi_bus_number: root bus has no _BBN, assuming 0
>>> AcpiOsDerivePciId: \\_SB_.PCI0.IBRG.ICH5 -> bus 0 dev 31 func 0
>>> ACPI timer: 0/397 0/5 0/5 0/5 0/6 0/5 0/5 0/6 0/5 0/4 -> 0
>>> Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
>>> acpi_timer0: <24-bit timer at 3.579545MHz> port 0x908-0x90b on acpi0
>>> pci_link0: Index IRQ Rtd Ref IRQs
>>> Initial Probe 0 5 N 0 5 7 10 11
>>> Validation 0 5 N 0 5 7 10 11
>>> After Disable 0 255 N 0 5 7 10 11
>>> pci_link1: Index IRQ Rtd Ref IRQs
>>> Initial Probe 0 7 N 0 5 7 10 11
>>> Validation 0 7 N 0 5 7 10 11
>>> After Disable 0 255 N 0 5 7 10 11
>>> pci_link2: Index IRQ Rtd Ref IRQs
>>> Initial Probe 0 7 N 0 5 7 10 11
>>> Validation 0 7 N 0 5 7 10 11
>>> After Disable 0 255 N 0 5 7 10 11
>>> pci_link3: Index IRQ Rtd Ref IRQs
>>> Initial Probe 0 5 N 0 5 7 10 11
>>> Validation 0 5 N 0 5 7 10 11
>>> After Disable 0 255 N 0 5 7 10 11
>>> pci_link4: Index IRQ Rtd Ref IRQs
>>> Initial Probe 0 255 N 0 5 7 10 11
>>> Validation 0 255 N 0 5 7 10 11
>>> After Disable 0 255 N 0 5 7 10 11
>>> pci_link5: Index IRQ Rtd Ref IRQs
>>> Initial Probe 0 5 N 0 5 7 10 11
>>> Validation 0 5 N 0 5 7 10 11
>>> After Disable 0 255 N 0 5 7 10 11
>>> pci_link6: Index IRQ Rtd Ref IRQs
>>> Initial Probe 0 5 N 0 5 7 10 11
>>> Validation 0 5 N 0 5 7 10 11
>>> After Disable 0 255 N 0 5 7 10 11
>>> pci_link7: Index IRQ Rtd Ref IRQs
>>> Initial Probe 0 5 N 0 5 7 10 11
>>> Validation 0 5 N 0 5 7 10 11
>>> After Disable 0 255 N 0 5 7 10 11
>>> pcib0: <ACPI Host-PCI bridge> on acpi0
>>> pci0: <ACPI PCI bus> on pcib0
>>> pci0: domain=0, physical bus=0
>>> found-> vendor=0x8086, dev=0x3590, revid=0x0c
>>> domain=0, bus=0, slot=0, func=0
>>> class=06-00-00, hdrtype=0x00, mfdev=1
>>> cmdreg=0x0146, statreg=0x0090, cachelnsz=0 (dwords)
>>> lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>>> found-> vendor=0x8086, dev=0x3595, revid=0x0c
>>> domain=0, bus=0, slot=2, func=0
>>> class=06-04-00, hdrtype=0x01, mfdev=0
>>> cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords)
>>> lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns)
>>> intpin=a, irq=255
>>> powerspec 2 supports D0 D3 current D0
>>> MSI supports 2 messages
>>> found-> vendor=0x8086, dev=0x3599, revid=0x0c
>>> domain=0, bus=0, slot=6, func=0
>>> class=06-04-00, hdrtype=0x01, mfdev=0
>>> cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords)
>>> lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns)
>>> intpin=a, irq=255
>>> powerspec 2 supports D0 D3 current D0
>>> MSI supports 2 messages
>>> found-> vendor=0x8086, dev=0x24d2, revid=0x02
>>> domain=0, bus=0, slot=29, func=0
>>> class=0c-03-00, hdrtype=0x00, mfdev=1
>>> cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
>>> lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>>> intpin=a, irq=5
>>> map[20]: type I/O Port, range 32, base 0x3000, size 5, enabled
>>> pcib0: matched entry for 0.29.INTA
>>> pcib0: slot 29 INTA hardwired to IRQ 16
>>> found-> vendor=0x8086, dev=0x24d4, revid=0x02
>>> domain=0, bus=0, slot=29, func=1
>>> class=0c-03-00, hdrtype=0x00, mfdev=0
>>> cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
>>> lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>>> intpin=b, irq=5
>>> map[20]: type I/O Port, range 32, base 0x3020, size 5, enabled
>>> pcib0: matched entry for 0.29.INTB
>>> pcib0: slot 29 INTB hardwired to IRQ 19
>>> found-> vendor=0x8086, dev=0x24d7, revid=0x02
>>> domain=0, bus=0, slot=29, func=2
>>> class=0c-03-00, hdrtype=0x00, mfdev=0
>>> cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
>>> lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>>> intpin=c, irq=7
>>> map[20]: type I/O Port, range 32, base 0x3040, size 5, enabled
>>> pcib0: matched entry for 0.29.INTC
>>> pcib0: slot 29 INTC hardwired to IRQ 18
>>> found-> vendor=0x8086, dev=0x24de, revid=0x02
>>> domain=0, bus=0, slot=29, func=3
>>> class=0c-03-00, hdrtype=0x00, mfdev=0
>>> cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
>>> lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>>> intpin=a, irq=5
>>> map[20]: type I/O Port, range 32, base 0x3060, size 5, enabled
>>> pcib0: matched entry for 0.29.INTA
>>> pcib0: slot 29 INTA hardwired to IRQ 16
>>> found-> vendor=0x8086, dev=0x24dd, revid=0x02
>>> domain=0, bus=0, slot=29, func=7
>>> class=0c-03-20, hdrtype=0x00, mfdev=0
>>> cmdreg=0x0106, statreg=0x0290, cachelnsz=0 (dwords)
>>> lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>>> intpin=d, irq=5
>>> powerspec 2 supports D0 D3 current D0
>>> map[10]: type Memory, range 32, base 0xfbef0000, size 10, enabled
>>> pcib0: matched entry for 0.29.INTD
>>> pcib0: slot 29 INTD hardwired to IRQ 23
>>> found-> vendor=0x8086, dev=0x244e, revid=0xc2
>>> domain=0, bus=0, slot=30, func=0
>>> class=06-04-00, hdrtype=0x01, mfdev=0
>>> cmdreg=0x0147, statreg=0x0080, cachelnsz=0 (dwords)
>>> lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns)
>>> found-> vendor=0x8086, dev=0x24d0, revid=0x02
>>> domain=0, bus=0, slot=31, func=0
>>> class=06-01-00, hdrtype=0x00, mfdev=1
>>> cmdreg=0x014f, statreg=0x0280, cachelnsz=0 (dwords)
>>> lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>>> found-> vendor=0x8086, dev=0x24db, revid=0x02
>>> domain=0, bus=0, slot=31, func=1
>>> class=01-01-8a, hdrtype=0x00, mfdev=0
>>> cmdreg=0x0005, statreg=0x0288, cachelnsz=0 (dwords)
>>> lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>>> intpin=a, irq=255
>>> map[20]: type I/O Port, range 32, base 0x500, size 4, enabled
>>> map[24]: type Memory, range 32, base 0, size 10, memory disabled
>>> pcib1: <ACPI PCI-PCI bridge> at device 2.0 on pci0
>>> pcib1: domain 0
>>> pcib1: secondary bus 2
>>> pcib1: subordinate bus 4
>>> pcib1: I/O decode 0x4000-0x4fff
>>> pcib1: memory decode 0xfdd00000-0xfdefffff
>>> pcib1: no prefetched decode
>>> pci2: <ACPI PCI bus> on pcib1
>>> pci2: domain=0, physical bus=2
>>> found-> vendor=0x8086, dev=0x0329, revid=0x09
>>> domain=0, bus=2, slot=0, func=0
>>> class=06-04-00, hdrtype=0x01, mfdev=1
>>> cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords)
>>> lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns)
>>> powerspec 2 supports D0 D3 current D0
>>> MSI supports 1 message, 64 bit
>>> found-> vendor=0x8086, dev=0x032a, revid=0x09
>>> domain=0, bus=2, slot=0, func=2
>>> class=06-04-00, hdrtype=0x01, mfdev=1
>>> cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords)
>>> lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns)
>>> powerspec 2 supports D0 D3 current D0
>>> MSI supports 1 message, 64 bit
>>> pcib2: <ACPI PCI-PCI bridge> at device 0.0 on pci2
>>> pcib2: domain 0
>>> pcib2: secondary bus 3
>>> pcib2: subordinate bus 3
>>> pcib2: I/O decode 0xf000-0xfff
>>> pcib2: memory decode 0xfdd00000-0xfddfffff
>>> pcib2: no prefetched decode
>>> pci3: <ACPI PCI bus> on pcib2
>>> pci3: domain=0, physical bus=3
>>> found-> vendor=0x14e4, dev=0x1648, revid=0x10
>>> domain=0, bus=3, slot=1, func=0
>>> class=02-00-00, hdrtype=0x00, mfdev=1
>>> cmdreg=0x0156, statreg=0x02b0, cachelnsz=16 (dwords)
>>> lattimer=0x40 (1920 ns), mingnt=0x40 (16000 ns), maxlat=0x00 (0 ns)
>>> intpin=a, irq=7
>>> powerspec 2 supports D0 D3 current D0
>>> MSI supports 8 messages, 64 bit
>>> map[10]: type Memory, range 64, base 0xfddf0000, size 16, enabled
>>> pcib2: requested memory range 0xfddf0000-0xfddfffff: good
>>> pcib1: requested memory range 0xfddf0000-0xfddfffff: good
>>> pcib2: matched entry for 3.1.INTA
>>> pcib2: slot 1 INTA hardwired to IRQ 25
>>> found-> vendor=0x14e4, dev=0x1648, revid=0x10
>>> domain=0, bus=3, slot=1, func=1
>>> class=02-00-00, hdrtype=0x00, mfdev=1
>>> cmdreg=0x0156, statreg=0x02b0, cachelnsz=16 (dwords)
>>> lattimer=0x40 (1920 ns), mingnt=0x40 (16000 ns), maxlat=0x00 (0 ns)
>>> intpin=b, irq=7
>>> powerspec 2 supports D0 D3 current D0
>>> MSI supports 8 messages, 64 bit
>>> map[10]: type Memory, range 64, base 0xfdde0000, size 16, enabled
>>> pcib2: requested memory range 0xfdde0000-0xfddeffff: good
>>> pcib1: requested memory range 0xfdde0000-0xfddeffff: good
>>> pcib2: matched entry for 3.1.INTB
>>> pcib2: slot 1 INTB hardwired to IRQ 26
>>> pci0:3:1:0: bad VPD cksum, remain 19
>>> bge0: <HP NC7782 Gigabit Server Adapter, ASIC rev. 0x2100> mem
>>> 0xfddf0000-0xfddfffff irq 25 at device 1.0 on pci3
>>> bge0: Reserved 0x10000 bytes for rid 0x10 type 3 at 0xfddf0000
>>> bge0: CHIP ID 0x21000000; ASIC REV 0x02; CHIP REV 0x21; PCI-X
>>> miibus0: <MII bus> on bge0
>>> brgphy0: <BCM5704 10/100/1000baseTX PHY> PHY 1 on miibus0
>>> brgphy0: OUI 0x000818, model 0x0019, rev. 0
>>> brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
>>> 1000baseT-FDX, auto
>>> bge0: bpf attached
>>> bge0: Ethernet address: 00:12:79:d1:2e:2d
>>> ioapic1: routing intpin 1 (PCI IRQ 25) to lapic 0 vector 49
>>> bge0: [MPSAFE]
>>> bge0: [ITHREAD]
>>> pci0:3:1:1: bad VPD cksum, remain 19
>>> bge1: <HP NC7782 Gigabit Server Adapter, ASIC rev. 0x2100> mem
>>> 0xfdde0000-0xfddeffff irq 26 at device 1.1 on pci3
>>> bge1: Reserved 0x10000 bytes for rid 0x10 type 3 at 0xfdde0000
>>> bge1: CHIP ID 0x21000000; ASIC REV 0x02; CHIP REV 0x21; PCI-X
>>> miibus1: <MII bus> on bge1
>>> brgphy1: <BCM5704 10/100/1000baseTX PHY> PHY 1 on miibus1
>>> brgphy1: OUI 0x000818, model 0x0019, rev. 0
>>> brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
>>> 1000baseT-FDX, auto
>>> bge1: bpf attached
>>> bge1: Ethernet address: 00:12:79:d1:2e:2c
>>> ioapic1: routing intpin 2 (PCI IRQ 26) to lapic 0 vector 50
>>> bge1: [MPSAFE]
>>> bge1: [ITHREAD]
>>> pcib3: <ACPI PCI-PCI bridge> at device 0.2 on pci2
>>> pcib3: domain 0
>>> pcib3: secondary bus 4
>>> pcib3: subordinate bus 4
>>> pcib3: I/O decode 0x4000-0x4fff
>>> pcib3: memory decode 0xfde00000-0xfdefffff
>>> pcib3: no prefetched decode
>>> pci4: <ACPI PCI bus> on pcib3
>>> pci4: domain=0, physical bus=4
>>> found-> vendor=0x0e11, dev=0x0046, revid=0x01
>>> domain=0, bus=4, slot=3, func=0
>>> class=01-04-00, hdrtype=0x00, mfdev=0
>>> cmdreg=0x0157, statreg=0x0230, cachelnsz=16 (dwords)
>>> lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>>> intpin=a, irq=5
>>> powerspec 2 supports D0 D1 D3 current D0
>>> map[10]: type Memory, range 64, base 0xfdef0000, size 13, enabled
>>> pcib3: requested memory range 0xfdef0000-0xfdef1fff: good
>>> pcib1: requested memory range 0xfdef0000-0xfdef1fff: good
>>> map[18]: type I/O Port, range 32, base 0x4000, size 8, enabled
>>> pcib3: requested I/O range 0x4000-0x40ff: in range
>>> pcib1: requested I/O range 0x4000-0x40ff: in range
>>> map[1c]: type Memory, range 64, base 0xfde80000, size 18, enabled
>>> pcib3: requested memory range 0xfde80000-0xfdebffff: good
>>> pcib1: requested memory range 0xfde80000-0xfdebffff: good
>>> pcib3: matched entry for 4.3.INTA
>>> pcib3: slot 3 INTA hardwired to IRQ 51
>>> ciss0: <HP Smart Array 6i> port 0x4000-0x40ff mem
>>> 0xfdef0000-0xfdef1fff,0xfde80000-0xfdebffff irq 51 at device 3.0 on pci4
>>> ciss0: Reserved 0x2000 bytes for rid 0x10 type 3 at 0xfdef0000
>>> ciss0: PERFORMANT Transport
>>> ciss0: got 0 MSI messages]
>>> ioapic2: routing intpin 3 (PCI IRQ 51) to lapic 0 vector 51
>>> ciss0: [MPSAFE]
>>> ciss0: [ITHREAD]
>>> ciss0: using 256 of 1024 available commands
>>> ciss0: firmware 2.84
>>> ciss0: 2 SCSI channels
>>> ciss0: signature 'CISS'
>>> ciss0: valence 1
>>> ciss0: supported I/O methods 0x80000006<simple,performant>
>>> ciss0: active I/O method 0x5<performant>
>>> ciss0: 4G page base 0x00000000
>>> ciss0: interrupt coalesce delay 0us
>>> ciss0: interrupt coalesce count 16
>>> ciss0: max outstanding commands 1024
>>> ciss0: bus types 0x4
>>> ciss0: server name ''
>>> ciss0: heartbeat 0x5c
>>> ciss0: 6 physical devices
>>> ciss0: 1 logical drive
>>> ciss0: logical drive (b0t0): RAID 1, 139776MB online
>>> pcib4: <ACPI PCI-PCI bridge> at device 6.0 on pci0
>>> pcib4: domain 0
>>> pcib4: secondary bus 5
>>> pcib4: subordinate bus 12
>>> pcib4: I/O decode 0x5000-0x5fff
>>> pcib4: memory decode 0xfdf00000-0xfdffffff
>>> pcib4: no prefetched decode
>>> pci5: <ACPI PCI bus> on pcib4
>>> pci5: domain=0, physical bus=5
>>> found-> vendor=0x8086, dev=0x0329, revid=0x09
>>> domain=0, bus=5, slot=0, func=0
>>> class=06-04-00, hdrtype=0x01, mfdev=1
>>> cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords)
>>> lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns)
>>> powerspec 2 supports D0 D3 current D0
>>> MSI supports 1 message, 64 bit
>>> found-> vendor=0x8086, dev=0x032a, revid=0x09
>>> domain=0, bus=5, slot=0, func=2
>>> class=06-04-00, hdrtype=0x01, mfdev=1
>>> cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords)
>>> lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns)
>>> powerspec 2 supports D0 D3 current D0
>>> MSI supports 1 message, 64 bit
>>> pcib5: <ACPI PCI-PCI bridge> at device 0.0 on pci5
>>> pcib5: domain 0
>>> pcib5: secondary bus 6
>>> pcib5: subordinate bus 9
>>> pcib5: I/O decode 0x5000-0x5fff
>>> pcib5: memory decode 0xfdf00000-0xfdffffff
>>> pcib5: no prefetched decode
>>> pci6: <ACPI PCI bus> on pcib5
>>> pci6: domain=0, physical bus=6
>>> found-> vendor=0x1014, dev=0x01a7, revid=0x02
>>> domain=0, bus=6, slot=2, func=0
>>> class=06-04-00, hdrtype=0x01, mfdev=0
>>> cmdreg=0x0147, statreg=0x0230, cachelnsz=16 (dwords)
>>> lattimer=0x40 (1920 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns)
>>> powerspec 2 supports D0 D3 current D0
>>> pcib6: <ACPI PCI-PCI bridge> at device 2.0 on pci6
>>> pcib6: domain 0
>>> pcib6: secondary bus 7
>>> pcib6: subordinate bus 7
>>> pcib6: I/O decode 0x5000-0x5fff
>>> pcib6: memory decode 0xfdf00000-0xfdffffff
>>> pcib6: no prefetched decode
>>> device_attach: pcib6 attach returned 6
>>> pcib7: <ACPI PCI-PCI bridge> at device 0.2 on pci5
>>> pcib7: domain 0
>>> pcib7: secondary bus 10
>>> pcib7: subordinate bus 12
>>> pcib7: I/O decode 0xf000-0xfff
>>> pcib7: no prefetched decode
>>> pci10: <ACPI PCI bus> on pcib7
>>> pci10: domain=0, physical bus=10
>>> uhci0: <Intel 82801EB (ICH5) USB controller USB-A> port 0x3000-0x301f
>>> irq 16 at device 29.0 on pci0
>>> uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0x3000
>>> ioapic0: routing intpin 16 (PCI IRQ 16) to lapic 0 vector 52
>>> uhci0: [MPSAFE]
>>> uhci0: [ITHREAD]
>>> uhci0: LegSup = 0x003b
>>> usbus0: <Intel 82801EB (ICH5) USB controller USB-A> on uhci0
>>> uhci1: <Intel 82801EB (ICH5) USB controller USB-B> port 0x3020-0x303f
>>> irq 19 at device 29.1 on pci0
>>> uhci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0x3020
>>> ioapic0: routing intpin 19 (PCI IRQ 19) to lapic 0 vector 53
>>> uhci1: [MPSAFE]
>>> uhci1: [ITHREAD]
>>> uhci1: LegSup = 0x0010
>>> usbus1: <Intel 82801EB (ICH5) USB controller USB-B> on uhci1
>>> uhci2: <Intel 82801EB (ICH5) USB controller USB-C> port 0x3040-0x305f
>>> irq 18 at device 29.2 on pci0
>>> uhci2: Reserved 0x20 bytes for rid 0x20 type 4 at 0x3040
>>> ioapic0: routing intpin 18 (PCI IRQ 18) to lapic 0 vector 54
>>> uhci2: [MPSAFE]
>>> uhci2: [ITHREAD]
>>> uhci2: LegSup = 0x0010
>>> usbus2: <Intel 82801EB (ICH5) USB controller USB-C> on uhci2
>>> uhci3: <Intel 82801EB (ICH5) USB controller USB-D> port 0x3060-0x307f
>>> irq 16 at device 29.3 on pci0
>>> uhci3: Reserved 0x20 bytes for rid 0x20 type 4 at 0x3060
>>> uhci3: [MPSAFE]
>>> uhci3: [ITHREAD]
>>> uhci3: LegSup = 0x0010
>>> usbus3: <Intel 82801EB (ICH5) USB controller USB-D> on uhci3
>>> ehci0: <Intel 82801EB/R (ICH5) USB 2.0 controller> mem
>>> 0xfbef0000-0xfbef03ff irq 23 at device 29.7 on pci0
>>> ehci0: Reserved 0x400 bytes for rid 0x10 type 3 at 0xfbef0000
>>> ioapic0: routing intpin 23 (PCI IRQ 23) to lapic 0 vector 55
>>> ehci0: [MPSAFE]
>>> ehci0: [ITHREAD]
>>> usbus4: EHCI version 1.0
>>> usbus4: <Intel 82801EB/R (ICH5) USB 2.0 controller> on ehci0
>>> pcib8: <ACPI PCI-PCI bridge> at device 30.0 on pci0
>>> pcib8: domain 0
>>> pcib8: secondary bus 1
>>> pcib8: subordinate bus 1
>>> pcib8: I/O decode 0x1000-0x2fff
>>> pcib8: memory decode 0xfbf00000-0xfcffffff
>>> pcib8: no prefetched decode
>>> pcib8: Subtractively decoded bridge.
>>> pci1: <ACPI PCI bus> on pcib8
>>> pci1: domain=0, physical bus=1
>>> found-> vendor=0x1002, dev=0x4752, revid=0x27
>>> domain=0, bus=1, slot=3, func=0
>>> class=03-00-00, hdrtype=0x00, mfdev=0
>>> cmdreg=0x0087, statreg=0x0290, cachelnsz=16 (dwords)
>>> lattimer=0x40 (1920 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns)
>>> powerspec 2 supports D0 D1 D2 D3 current D0
>>> map[10]: type Memory, range 32, base 0xfc000000, size 24, enabled
>>> pcib8: requested memory range 0xfc000000-0xfcffffff: good
>>> map[14]: type I/O Port, range 32, base 0x2000, size 8, enabled
>>> pcib8: requested I/O range 0x2000-0x20ff: in range
>>> map[18]: type Memory, range 32, base 0xfbff0000, size 12, enabled
>>> pcib8: requested memory range 0xfbff0000-0xfbff0fff: good
>>> found-> vendor=0x0e11, dev=0xb203, revid=0x01
>>> domain=0, bus=1, slot=4, func=0
>>> class=08-80-00, hdrtype=0x00, mfdev=1
>>> cmdreg=0x0103, statreg=0x0290, cachelnsz=0 (dwords)
>>> lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>>> intpin=a, irq=5
>>> powerspec 2 supports D0 D3 current D0
>>> map[10]: type I/O Port, range 32, base 0x1800, size 8, enabled
>>> pcib8: requested I/O range 0x1800-0x18ff: in range
>>> map[14]: type Memory, range 32, base 0xfbfe0000, size 9, enabled
>>> pcib8: requested memory range 0xfbfe0000-0xfbfe01ff: good
>>> pcib8: matched entry for 1.4.INTA
>>> pcib8: slot 4 INTA hardwired to IRQ 21
>>> found-> vendor=0x0e11, dev=0xb204, revid=0x01
>>> domain=0, bus=1, slot=4, func=2
>>> class=08-80-00, hdrtype=0x00, mfdev=1
>>> cmdreg=0x0197, statreg=0x0290, cachelnsz=16 (dwords)
>>> lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>>> intpin=b, irq=5
>>> powerspec 2 supports D0 D3 current D0
>>> map[10]: type I/O Port, range 32, base 0x2400, size 8, enabled
>>> pcib8: requested I/O range 0x2400-0x24ff: in range
>>> map[14]: type Memory, range 32, base 0xfbfd0000, size 11, enabled
>>> pcib8: requested memory range 0xfbfd0000-0xfbfd07ff: good
>>> map[18]: type Memory, range 32, base 0xfbfc0000, size 13, enabled
>>> pcib8: requested memory range 0xfbfc0000-0xfbfc1fff: good
>>> map[1c]: type Memory, range 32, base 0xfbf00000, size 19, enabled
>>> pcib8: requested memory range 0xfbf00000-0xfbf7ffff: good
>>> pcib8: matched entry for 1.4.INTB
>>> pcib8: slot 4 INTB hardwired to IRQ 22
>>> vgapci0: <VGA-compatible display> port 0x2000-0x20ff mem
>>> 0xfc000000-0xfcffffff,0xfbff0000-0xfbff0fff at device 3.0 on pci1
>>> pci1: <base peripheral> at device 4.0 (no driver attached)
>>> pci1: <base peripheral> at device 4.2 (no driver attached)
>>> isab0: <PCI-ISA bridge> at device 31.0 on pci0
>>> isa0: <ISA bus> on isab0
>>> atapci0: <Intel ICH5 UDMA100 controller> port
>>> 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x500-0x50f at device 31.1 on pci0
>>> atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x500
>>> ata0: <ATA channel 0> on atapci0
>>> atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
>>> atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
>>> ata0: reset tp1 mask=03 ostat0=50 ostat1=00
>>> ata0: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb
>>> ata0: stat1=0x00 err=0x00 lsb=0x00 msb=0x00
>>> ata0: reset tp2 stat0=00 stat1=00 devices=0x10000
>>> ioapic0: routing intpin 14 (ISA IRQ 14) to lapic 0 vector 56
>>> ata0: [MPSAFE]
>>> ata0: [ITHREAD]
>>> ata1: <ATA channel 1> on atapci0
>>> atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
>>> atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
>>> ata1: reset tp1 mask=03 ostat0=00 ostat1=00
>>> ata1: stat0=0x01 err=0x01 lsb=0x01 msb=0x01
>>> ata1: stat1=0x01 err=0x01 lsb=0x01 msb=0x01
>>> ata1: reset tp2 stat0=01 stat1=01 devices=0x0
>>> ioapic0: routing intpin 15 (ISA IRQ 15) to lapic 0 vector 57
>>> ata1: [MPSAFE]
>>> ata1: [ITHREAD]
>>> acpi_tz0: <Thermal Zone> on acpi0
>>> atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
>>> atkbd0: <AT Keyboard> irq 1 on atkbdc0
>>> atkbd: the current kbd controller command byte 0065
>>> atkbd: keyboard ID 0x41ab (2)
>>> kbd0 at atkbd0
>>> kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
>>> ioapic0: routing intpin 1 (ISA IRQ 1) to lapic 0 vector 58
>>> atkbd0: [GIANT-LOCKED]
>>> atkbd0: [ITHREAD]
>>> psm0: unable to allocate IRQ
>>> psmcpnp0: <PS/2 mouse port> irq 12 on acpi0
>>> psm0: current command byte:0065
>>> psm0: <PS/2 Mouse> irq 12 on atkbdc0
>>> ioapic0: routing intpin 12 (ISA IRQ 12) to lapic 0 vector 59
>>> psm0: [GIANT-LOCKED]
>>> psm0: [ITHREAD]
>>> psm0: model Generic PS/2 mouse, device ID 0-00, 2 buttons
>>> psm0: config:00000000, flags:00000008, packet size:3
>>> psm0: syncmask:c0, syncbits:00
>>> uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
>>> ioapic0: routing intpin 4 (ISA IRQ 4) to lapic 0 vector 60
>>> uart0: [FILTER]
>>> uart0: fast interrupt
>>> fdc0: <floppy drive controller (FDE)> port 0x3f2-0x3f5 irq 6 drq 2 on acpi0
>>> fdc0: ic_type 90 part_id 73
>>> ioapic0: routing intpin 6 (ISA IRQ 6) to lapic 0 vector 61
>>> fdc0: [FILTER]
>>> fd0: <1440-KB 3.5" drive> on fdc0 drive 0
>>> cpu0: <ACPI CPU> on acpi0
>>> ACPI: SSDT 0xdfff9000 002DA (v1 HP SSDT0 00000001 INTL 20030228)
>>> cpu0: switching to generic Cx mode
>>> acpi_perf0: <ACPI CPU Frequency Control> on cpu0
>>> p4tcc0: <CPU Frequency Thermal Control> on cpu0
>>> cpu1: <ACPI CPU> on acpi0
>>> ACPI: SSDT 0xdfff9300 002DA (v1 HP SSDT1 00000001 INTL 20030228)
>>> est1: <Enhanced SpeedStep Frequency Control> on cpu1
>>> est: CPU supports Enhanced Speedstep, but is not recognized.
>>> est: cpu_vendor GenuineIntel, msr 112d0000112d
>>> device_attach: est1 attach returned 6
>>> p4tcc1: <CPU Frequency Thermal Control> on cpu1
>>> cpu2: <ACPI CPU> on acpi0
>>> ACPI: SSDT 0xdfff9600 002DA (v1 HP SSDT2 00000001 INTL 20030228)
>>> est2: <Enhanced SpeedStep Frequency Control> on cpu2
>>> est: CPU supports Enhanced Speedstep, but is not recognized.
>>> est: cpu_vendor GenuineIntel, msr 112d0000112d
>>> device_attach: est2 attach returned 6
>>> p4tcc2: <CPU Frequency Thermal Control> on cpu2
>>> cpu3: <ACPI CPU> on acpi0
>>> ACPI: SSDT 0xdfff9900 002DF (v1 HP SSDT3 00000001 INTL 20030228)
>>> est3: <Enhanced SpeedStep Frequency Control> on cpu3
>>> est: CPU supports Enhanced Speedstep, but is not recognized.
>>> est: cpu_vendor GenuineIntel, msr 112d0000112d
>>> device_attach: est3 attach returned 6
>>> p4tcc3: <CPU Frequency Thermal Control> on cpu3
>>> ahc_isa_probe 0: ioport 0xc00 alloc failed
>>> ex_isa_identify()
>>> isa_probe_children: disabling PnP devices
>>> atkbdc: atkbdc0 already exists; skipping it
>>> fdc: fdc0 already exists; skipping it
>>> sc: sc0 already exists; skipping it
>>> uart: uart0 already exists; skipping it
>>> isa_probe_children: probing non-PnP devices
>>> orm0: <ISA Option ROMs> at iomem
>>> 0xc0000-0xc7fff,0xc8000-0xcbfff,0xee000-0xeffff on isa0
>>> sc0: <System console> at flags 0x100 on isa0
>>> sc0: VGA <16 virtual consoles, flags=0x300>
>>> sc0: fb0, kbd1, terminal emulator: scteken (teken terminal)
>>> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
>>> atrtc0: <AT Real Time Clock> at port 0x70 irq 8 on isa0
>>> atrtc0: registered as a time-of-day clock (resolution 1000000us)
>>> ppc0: cannot reserve I/O port range
>>> ppc0: <Parallel port> failed to probe at irq 7 on isa0
>>> uart1: <Non-standard ns8250 class UART with FIFOs> at port 0x2f8-0x2ff
>>> irq 3 on isa0
>>> ioapic0: routing intpin 3 (ISA IRQ 3) to lapic 0 vector 62
>>> uart1: [FILTER]
>>> uart1: fast interrupt
>>> isa_probe_children: probing PnP devices
>>> Device configuration finished.
>>> Reducing kern.maxvnodes 763673 -> 100000
>>> procfs registered
>>> lapic: Divisor 2, Frequency 100004020 hz
>>> Timecounter "TSC" frequency 3400136791 Hz quality -100
>>> Timecounters tick every 1.000 msec
>>> lo0: bpf attached
>>> hptrr: no controller detected.
>>> ata0: Identifying devices: 00010000
>>> ata0: New devices: 00010000
>>> fdc0: output ready timeout
>>> fdc0: output ready timeout
>>> fdc0: output ready timeout
>>> fdc0: output ready timeout
>>> fdc0: output ready timeout
>>> fdc0: output ready timeout
>>> fdc0: output ready timeout
>>> usbus0: 12Mbps Full Speed USB v1.0
>>> usbus1: 12Mbps Full Speed USB v1.0
>>> usbus2: 12Mbps Full Speed USB v1.0
>>> usbus3: 12Mbps Full Speed USB v1.0
>>> usbus4: 480Mbps High Speed USB v2.0
>>> ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA33 cable=40 wire
>>> acd0: setting PIO4 on ICH5 chip
>>> acd0: setting UDMA33 on ICH5 chip
>>> ugen0.1: <Intel> at usbus0
>>> uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
>>> ugen1.1: <Intel> at usbus1
>>> uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
>>> ugen2.1: <Intel> at usbus2
>>> uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
>>> ugen3.1: <Intel> at usbus3
>>> uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
>>> ugen4.1: <Intel> at usbus4
>>> uhub4: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus4
>>> acd0: <HL-DT-STCD-RW/DVD DRIVE GCC-C10N/2.00> CDRW drive at ata0 as master
>>> acd0: read 4134KB/s (4134KB/s) write 4134KB/s (4134KB/s), 2048KB buffer,
>>> UDMA33
>>> acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, DVDRAM, packet
>>> acd0: Writes: CDR, CDRW, test write, burnproof
>>> acd0: Audio: play, 256 volume levels
>>> acd0: Mechanism: ejectable tray, unlocked
>>> acd0: Medium: no/blank disc
>>> ata1: Identifying devices: 00000000
>>> ata1: New devices: 00000000
>>> uhub0: 2 ports with 2 removable, self powered
>>> uhub1: 2 ports with 2 removable, self powered
>>> uhub2: 2 ports with 2 removable, self powered
>>> uhub3: 2 ports with 2 removable, self powered
>>> fdc0: output ready timeout
>>> fdc0: input ready timeout
>>> fdc0: input ready timeout
>>> fdc0: output ready timeout
>>> fdc0: input ready timeout
>>> fdc0: input ready timeout
>>> fdc0: output ready timeout
>>> fdc0: input ready timeout
>>> fdc0: input ready timeout
>>> fdc0: output ready timeout
>>> fdc0: input ready timeout
>>> fdc0: input ready timeout
>>> da0 at ciss0 bus 0 target 0 lun 0
>>> da0: <COMPAQ RAID 1 VOLUME OK> Fixed Direct Access SCSI-4 device
>>> da0: 135.168MB/s transfers
>>> da0: Command Queueing enabled
>>> da0: 140002MB (286726080 512 byte sectors: 255H 32S/T 35138C)
>>> pass0 at ciss0 bus 0 target 0 lun 0
>>> pass0: <COMPAQ RAID 1 VOLUME OK> Fixed Direct Access SCSI-4 device
>>> pass0: 135.168MB/s transfers
>>> pass0: Command Queueing enabled
>>> pass1 at ciss0 bus 33 target 0 lun 0
>>> pass1: <SEAGATE ST373207LC 0005> Fixed Uninstalled SCSI-3 device
>>> pass1: Serial Number 3KT5ABMQ000077052PVP
>>> pass1: 135.168MB/s transfers
>>> pass1: Command Queueing enabled
>>> pass2 at ciss0 bus 33 target 1 lun 0
>>> pass2: <SEAGATE ST373207LC 0005> Fixed Uninstalled SCSI-3 device
>>> pass2: Serial Number 3KT65G0300009740UG3C
>>> pass2: 135.168MB/s transfers
>>> pass2: Command Queueing enabled
>>> pass3 at ciss0 bus 33 target 2 lun 0
>>> pass3: <SEAGATE ST373207LC 0005> Fixed Uninstalled SCSI-3 device
>>> pass3: Serial Number 3KT65G7800009740W27L
>>> pass3: 135.168MB/s transfers
>>> pass3: Command Queueing enabled
>>> pass4 at ciss0 bus 33 target 3 lun 0
>>> pass4: <SEAGATE ST373207LC 0003> Fixed Uninstalled SCSI-3 device
>>> pass4: Serial Number 3KT2W9ZB00007616NLEN
>>> pass4: 135.168MB/s transfers
>>> pass4: Command Queueing enabled
>>> pass5 at ciss0 bus 33 target 4 lun 0
>>> pass5: <SEAGATE ST373207LC 0003> Fixed Uninstalled SCSI-3 device
>>> pass5: Serial Number 3KT18LBP0000754281N7
>>> pass5: 135.168MB/s transfers
>>> pass5: Command Queueing enabled
>>> pass6 at ciss0 bus 33 target 7 lun 0
>>> pass6: <COMPAQ PROLIANT 6L6I 0.10> Fixed Processor SCSI-2 device
>>> pass6: 135.168MB/s transfers
>>> ATA PseudoRAID loaded
>>> SMP: AP CPU #1 Launched!
>>> cpu1 AP:
>>> ID: 0x01000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff
>>> lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
>>> timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010400
>>> SMP: AP CPU #2 Launched!
>>> cpu2 AP:
>>> ID: 0x06000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff
>>> lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
>>> timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010400
>>> SMP: AP CPU #3 Launched!
>>> cpu3 AP:
>>> ID: 0x07000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff
>>> lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
>>> timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010400
>>> ioapic0: routing intpin 3 (ISA IRQ 3) to lapic 6 vector 48
>>> ioapic0: routing intpin 6 (ISA IRQ 6) to lapic 6 vector 49
>>> ioapic0: routing intpin 12 (ISA IRQ 12) to lapic 6 vector 50
>>> ioapic0: routing intpin 15 (ISA IRQ 15) to lapic 6 vector 51
>>> ioapic0: routing intpin 18 (PCI IRQ 18) to lapic 6 vector 52
>>> ioapic0: routing intpin 23 (PCI IRQ 23) to lapic 6 vector 53
>>> ioapic1: routing intpin 2 (PCI IRQ 26) to lapic 6 vector 54
>>> uhub4: 8 ports with 8 removable, self powered
>>> ugen2.2: <vendor 0x04d9> at usbus2
>>> ukbd0: <vendor 0x04d9 product 0x1400, class 0/0, rev 1.10/1.43, addr 2>
>>> on usbus2
>>> kbd2 at ukbd0
>>> kbd2: ukbd0, generic (0), config:0x0, flags:0x3d0000
>>> ums0: <vendor 0x04d9 product 0x1400, class 0/0, rev 1.10/1.43, addr 2>
>>> on usbus2
>>> ums0: 5 buttons and [XYZ] coordinates ID=1
>>> GEOM: new disk da0
>>> Trying to mount root from ufs:/dev/da0s1a
>>> ct_to_ts([2010-05-04 17:49:30]) = 1272995370.000000000
>>> start_init: trying /sbin/init
>>> bge0:
>>> bge0: link state changed to UP
>>> link UP
>>>
>>> _______________________________________________
>>> freebsd-scsi at freebsd.org mailing list
>>> http://lists.freebsd.org/mailman/listinfo/freebsd-scsi
>>> To unsubscribe, send any mail to "freebsd-scsi-unsubscribe at freebsd.org"
>>
More information about the freebsd-scsi
mailing list