/dev/ch0 not recognized
frank cheong
kwcheong at gmail.com
Fri Jul 9 02:05:27 UTC 2010
Dear Scott,
I see your point. Maybe the proprietary driver provided by HP for Window and
Linux is using some other undocumented way in order to grab those hidden
device, who knows?
Anyway, I think what you suspect about the hw.ciss.expose_hidden_physical is
really highly likely coz I have tried to probe the device by using the devfs
rescan and input the lun address directly, whereby OS simply create another
/dev/sa device driver which is also a tape drive device.
For the function ciss_filter_physical(), I think I may not have the time and
experience in helping it out by writing a program. Let me know if you have
any working command/utility or scripts so that it help print out the entire
inventory. Coz I do want to help the community to grow so as to possibly
work around this problem. With that more people can adopt FreeBSD more
easily. The server, which loaded up with Centos Now, is going to be deployed
as production environment really soon while I still have some time to play
around with it. Just let me know if anything useful that you would like me
to help to collect.
Rgds,
Frank
On Thu, Jul 8, 2010 at 10:00 PM, Scott Long <scottl at samsco.org> wrote:
> Someone asked me about this recently, and I looked into it a little bit
> (sorry, can't find the conversation in my archives, apologies in advance if
> it's someone in this discussion).
>
> With that note aside, you have to understand how this system works. It
> doesn't follow the traditional rules of SCSI when it comes to device
> discovery; instead the CISS firmware controls what devices are allowed to be
> seen by the OS. The OS cannot simply probe each possible bus/target/lun
> address on the controller. In fact, there's no such thing as bus/target/lun
> addressing in CISS. The CISS firmware creates an inventory of device
> handles and passes that to the driver, and the driver then creates synthetic
> bus/target/lun numbers to satisfy the SCSI layer in the OS. If a device
> isn't in the inventory provided by the firmware, then the driver and OS
> simply won't see it, period. There's no way for the driver or OS to
> discover a device that's not part of the firmware inventory.
>
> There are two special exceptions. The first is that the firmware does try
> to hide some devices. Typically these are disk devices, and are hidden so
> that you can't get screw around with a disk that's part of an array. They
> are part of the inventory, but are flagged for the driver to ignore. If you
> set the following tunable in /boot/loader.conf, you'll override the "ignore"
> setting:
>
> hw.ciss.expose_hidden_physical=1
>
> Second, when the hidden devices are exposed, the driver will filter the
> INQUIRY info and change T_DIRECT devices into T_NODEVICE devices. This has
> the effect of allowing disk drives to be seen only as passthrough devices,
> providing an extra safety belt to disks that are part of arrays.
>
> In my previous investigation, it looked like the tape device is showing up
> in the inventory, but not the changer device. That's pretty much a dead end
> for this problem, short of finding a hidden BIOS switch or a new firmware
> image or some other magic from HP. You can try turning on the expose
> tunable to see if it's actually part of the inventory, but hidden. If that
> doesn't work, you can try looking at ciss_filter_physical() in the driver
> and have it print out the entire inventory as it iterates through it; that
> might identify something that the driver doesn't know how to handle.
>
> Scott
>
>
>
> On Jul 6, 2010, at 10:26 PM, frank cheong wrote:
>
> > dmesg here
> >
> > freeBSD# dmesg
> > Copyright (c) 1992-2009 The FreeBSD Project.
> > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
> > The Regents of the University of California. All rights reserved.
> > FreeBSD is a registered trademark of The FreeBSD Foundation.
> > FreeBSD 8.0-RELEASE #0: Sat Nov 21 15:48:17 UTC 2009
> > root at almeida.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC
> > Preloaded elf kernel "/boot/kernel/kernel" at 0xc0f6f000.
> > Timecounter "i8254" frequency 1193182 Hz quality 0
> > Calibrating TSC clock ... TSC clock: 2266761792 Hz
> > CPU: Intel(R) Xeon(R) CPU E5520 @ 2.27GHz (2266.76-MHz
> 686-class
> > CPU)
> > Origin = "GenuineIntel" Id = 0x106a5 Stepping = 5
> >
> >
> Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
> >
> >
> Features2=0x9ce3bd<SSE3,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,DCA,SSE4.1,SSE4.2,POPCNT>
> > AMD Features=0x28100000<NX,RDTSCP,LM>
> > AMD Features2=0x1<LAHF>
> > TSC: P-state invariant
> >
> > Data TLB: 4 KB pages, 4-way set associative, 64 entries
> > 1st-level data cache: 32 KB, 8-way set associative, 64 byte line size
> > L2 cache: 256 kbytes, 8-way associative, 64 bytes/line
> > real memory = 4294967296 (4096 MB)
> > Physical memory chunk(s):
> > 0x0000000000001000 - 0x000000000009bfff, 634880 bytes (155 pages)
> > 0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
> > 0x0000000001026000 - 0x00000000bc126fff, 3138392064 bytes (766209 pages)
> > avail memory = 3137052672 (2991 MB)
> > Table 'FACP' at 0xbf770290
> > Table 'APIC' at 0xbf770390
> > MADT: Found table at 0xbf770390
> > MP Configuration Table version 1.4 found at 0xc00fd3e0
> > APIC: Using the MADT enumerator.
> > MADT: Found CPU APIC ID 16 ACPI ID 1: enabled
> > SMP: Added CPU 16 (AP)
> > MADT: Found CPU APIC ID 18 ACPI ID 2: enabled
> > SMP: Added CPU 18 (AP)
> > MADT: Found CPU APIC ID 20 ACPI ID 3: enabled
> > SMP: Added CPU 20 (AP)
> > MADT: Found CPU APIC ID 22 ACPI ID 4: enabled
> > SMP: Added CPU 22 (AP)
> > MADT: Found CPU APIC ID 17 ACPI ID 5: enabled
> > SMP: Added CPU 17 (AP)
> > MADT: Found CPU APIC ID 19 ACPI ID 6: enabled
> > SMP: Added CPU 19 (AP)
> > MADT: Found CPU APIC ID 21 ACPI ID 7: enabled
> > SMP: Added CPU 21 (AP)
> > MADT: Found CPU APIC ID 23 ACPI ID 8: enabled
> > SMP: Added CPU 23 (AP)
> > MADT: Found CPU APIC ID 136 ACPI ID 9: disabled
> > MADT: Found CPU APIC ID 137 ACPI ID 10: disabled
> > MADT: Found CPU APIC ID 138 ACPI ID 11: disabled
> > MADT: Found CPU APIC ID 139 ACPI ID 12: disabled
> > MADT: Found CPU APIC ID 140 ACPI ID 13: disabled
> > MADT: Found CPU APIC ID 141 ACPI ID 14: disabled
> > MADT: Found CPU APIC ID 142 ACPI ID 15: disabled
> > MADT: Found CPU APIC ID 143 ACPI ID 16: disabled
> > MADT: Found CPU APIC ID 144 ACPI ID 17: disabled
> > MADT: Found CPU APIC ID 145 ACPI ID 18: disabled
> > MADT: Found CPU APIC ID 146 ACPI ID 19: disabled
> > MADT: Found CPU APIC ID 147 ACPI ID 20: disabled
> > MADT: Found CPU APIC ID 148 ACPI ID 21: disabled
> > MADT: Found CPU APIC ID 149 ACPI ID 22: disabled
> > MADT: Found CPU APIC ID 150 ACPI ID 23: disabled
> > MADT: Found CPU APIC ID 151 ACPI ID 24: disabled
> > ACPI APIC Table: <HP ProLiant>
> > INTR: Adding local APIC 17 as a target
> > INTR: Adding local APIC 18 as a target
> > INTR: Adding local APIC 19 as a target
> > INTR: Adding local APIC 20 as a target
> > INTR: Adding local APIC 21 as a target
> > INTR: Adding local APIC 22 as a target
> > INTR: Adding local APIC 23 as a target
> > FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs
> > FreeBSD/SMP: 1 package(s) x 4 core(s) x 2 SMT threads
> > cpu0 (BSP): APIC ID: 16
> > cpu1 (AP): APIC ID: 17
> > cpu2 (AP): APIC ID: 18
> > cpu3 (AP): APIC ID: 19
> > cpu4 (AP): APIC ID: 20
> > cpu5 (AP): APIC ID: 21
> > cpu6 (AP): APIC ID: 22
> > cpu7 (AP): APIC ID: 23
> > APIC: CPU 0 has ACPI ID 1
> > APIC: CPU 1 has ACPI ID 5
> > APIC: CPU 2 has ACPI ID 2
> > APIC: CPU 3 has ACPI ID 6
> > APIC: CPU 4 has ACPI ID 3
> > APIC: CPU 5 has ACPI ID 7
> > APIC: CPU 6 has ACPI ID 4
> > APIC: CPU 7 has ACPI ID 8
> > bios32: Found BIOS32 Service Directory header at 0xc00f0000
> > bios32: Entry = 0xf0010 (c00f0010) Rev = 0 Len = 1
> > pcibios: PCI BIOS entry at 0xf0000+0x31
> > pnpbios: Found PnP BIOS data at 0xc00f3dd0
> > pnpbios: Entry = f0000:523a Rev = 1.0
> > Other BIOS signatures found:
> > ULE: setup cpu 0
> > ULE: setup cpu 1
> > ULE: setup cpu 2
> > ULE: setup cpu 3
> > ULE: setup cpu 4
> > ULE: setup cpu 5
> > ULE: setup cpu 6
> > ULE: setup cpu 7
> > ACPI: RSDP 0xfa160 00024 (v2 HP )
> > ACPI: XSDT 0xbf770100 0009C (v1 HP ProLiant 20100301 MSFT 00000097)
> > ACPI: FACP 0xbf770290 000F4 (v4 HP ProLiant 20100301 MSFT 00000097)
> > ACPI: DSDT 0xbf770740 05EEB (v2 HP ProLiant 00000200 INTL 20051117)
> > ACPI: FACS 0xbf77e000 00040
> > ACPI: APIC 0xbf770390 0011E (v2 HP ProLiant 20100301 MSFT 00000097)
> > ACPI: SPCR 0xbf7704b0 00050 (v1 HP ProLiant 20100301 MSFT 00000097)
> > ACPI: MCFG 0xbf770500 0003C (v1 HP ProLiant 20100301 MSFT 00000097)
> > ACPI: SPMI 0xbf770540 00041 (v5 HP ProLiant 20100301 MSFT 00000097)
> > ACPI: SLIC 0xbf770590 00176 (v1 HP SLIC1515 20100301 MSFT 00000097)
> > ACPI: BOOT 0xbf770710 00028 (v1 HP ProLiant 20100301 MSFT 00000097)
> > ACPI: OEMB 0xbf77e040 0007A (v1 HP ProLiant 20100301 MSFT 00000097)
> > ACPI: HPET 0xbf77a740 00038 (v1 HP ProLiant 20100301 MSFT 00000097)
> > ACPI: DMAR 0xbf77e0c0 000F8 (v1 AMI OEMDMAR 00000001 MSFT 00000097)
> > ACPI: SSDT 0xbf77fbf0 00363 (v1 HP ProLiant 00000012 INTL 20051117)
> > ACPI: EINJ 0xbf77a780 00130 (v1 HP ProLiant 20100301 MSFT 00000097)
> > ACPI: BERT 0xbf77a910 00030 (v1 HP ProLiant 20100301 MSFT 00000097)
> > ACPI: ERST 0xbf77a940 001B0 (v1 HP ProLiant 20100301 MSFT 00000097)
> > ACPI: HEST 0xbf77aaf0 000A8 (v1 HP ProLiant 20100301 MSFT 00000097)
> > MADT: Found IO APIC ID 8, Interrupt 0 at 0xfec00000
> > ioapic0: Changing APIC ID to 8
> > ioapic0: Routing external 8259A's -> intpin 0
> > MADT: Found IO APIC ID 9, Interrupt 24 at 0xfec8a000
> > ioapic1: Changing APIC ID to 9
> > MADT: Interrupt override: source 0, irq 2
> > ioapic0: Routing IRQ 0 -> intpin 2
> > MADT: Interrupt override: source 9, irq 9
> > ioapic0: intpin 9 trigger: level
> > lapic: Routing NMI -> LINT1
> > lapic: LINT1 trigger: edge
> > lapic: LINT1 polarity: high
> > ioapic0 <Version 2.0> irqs 0-23 on motherboard
> > ioapic1 <Version 2.0> irqs 24-47 on motherboard
> > cpu0 BSP:
> > ID: 0x10000000 VER: 0x00060015 LDR: 0x00000000 DFR: 0xffffffff
> > lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
> > timer: 0x000100ef therm: 0x00010000 err: 0x0001000f pcm: 0x00010400
> > wlan: <802.11 Link Layer>
> > kbd: new array size 4
> > kbd1 at kbdmux0
> > mem: <memory>
> > Pentium Pro MTRR support enabled
> > null: <null device, zero device>
> > random: <entropy source, Software, Yarrow>
> > nfslock: pseudo-device
> > io: <I/O>
> > hptrr: RocketRAID 17xx/2xxx SATA controller driver v1.2
> > npx0: INT 16 interface
> > acpi0: <HP ProLiant> on motherboard
> > PCIe: Memory Mapped configuration base @ 0xe0000000
> > pcibios: BIOS version 3.00
> > ioapic0: routing intpin 9 (ISA IRQ 9) to lapic 16 vector 48
> > acpi0: [MPSAFE]
> > acpi0: [ITHREAD]
> > acpi0: Power Button (fixed)
> > acpi0: wakeup code va 0xc62a6000 pa 0x1000
> > AcpiOsDerivePciId: \\_SB_.PCI0.SBRG.IELK.RXA0 -> bus 0 dev 0 func 0
> > AcpiOsDerivePciId: \\_SB_.PCI0.SBRG.PIX0 -> bus 0 dev 31 func 0
> > acpi0: reservation of 0, a0000 (3) failed
> > acpi0: reservation of 100000, bff00000 (3) failed
> > ACPI timer: 1/1 1/2 1/1 1/2 1/0 1/2 1/2 1/1 1/1 1/1 -> 10
> > Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
> > acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
> > pci_link0: Index IRQ Rtd Ref IRQs
> > Initial Probe 0 10 N 0 3 4 6 7 10 11 12 14 15
> > Validation 0 10 N 0 3 4 6 7 10 11 12 14 15
> > After Disable 0 255 N 0 3 4 6 7 10 11 12 14 15
> > pci_link1: Index IRQ Rtd Ref IRQs
> > Initial Probe 0 5 N 0 5
> > Validation 0 5 N 0 5
> > After Disable 0 255 N 0 5
> > pci_link2: Index IRQ Rtd Ref IRQs
> > Initial Probe 0 15 N 0 3 4 6 7 10 11 12 14 15
> > Validation 0 15 N 0 3 4 6 7 10 11 12 14 15
> > After Disable 0 255 N 0 3 4 6 7 10 11 12 14 15
> > pci_link3: Index IRQ Rtd Ref IRQs
> > Initial Probe 0 11 N 0 3 4 6 7 10 11 12 14 15
> > Validation 0 11 N 0 3 4 6 7 10 11 12 14 15
> > After Disable 0 255 N 0 3 4 6 7 10 11 12 14 15
> > pci_link4: Index IRQ Rtd Ref IRQs
> > Initial Probe 0 255 N 0 3 4 6 7 10 11 12 14 15
> > Validation 0 255 N 0 3 4 6 7 10 11 12 14 15
> > After Disable 0 255 N 0 3 4 6 7 10 11 12 14 15
> > pci_link5: Index IRQ Rtd Ref IRQs
> > Initial Probe 0 255 N 0 3 4 6 7 10 11 12 14 15
> > Validation 0 255 N 0 3 4 6 7 10 11 12 14 15
> > After Disable 0 255 N 0 3 4 6 7 10 11 12 14 15
> > pci_link6: Index IRQ Rtd Ref IRQs
> > Initial Probe 0 255 N 0 3 4 6 7 10 11 12 14 15
> > Validation 0 255 N 0 3 4 6 7 10 11 12 14 15
> > After Disable 0 255 N 0 3 4 6 7 10 11 12 14 15
> > pci_link7: Index IRQ Rtd Ref IRQs
> > Initial Probe 0 14 N 0 3 4 6 7 10 11 12 14 15
> > Validation 0 14 N 0 3 4 6 7 10 11 12 14 15
> > After Disable 0 255 N 0 3 4 6 7 10 11 12 14 15
> > acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on
> > acpi0
> > acpi_hpet0: vend: 0x8086 rev: 0x1 num: 3 hz: 14318180 opts: legacy_route
> > 64-bit
> > Timecounter "HPET" frequency 14318180 Hz quality 900
> > pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
> > pci0: <ACPI PCI bus> on pcib0
> > pci0: domain=0, physical bus=0
> > found-> vendor=0x8086, dev=0x3406, revid=0x13
> > domain=0, bus=0, slot=0, func=0
> > class=06-00-00, hdrtype=0x00, mfdev=0
> > cmdreg=0x0140, statreg=0x0810, cachelnsz=0 (dwords)
> > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
> > powerspec 3 supports D0 D3 current D0
> > MSI supports 2 messages, vector masks
> > found-> vendor=0x8086, dev=0x3408, revid=0x13
> > domain=0, bus=0, slot=1, func=0
> > class=06-04-00, hdrtype=0x01, mfdev=0
> > cmdreg=0x0147, statreg=0x0010, cachelnsz=64 (dwords)
> > lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns)
> > powerspec 3 supports D0 D3 current D0
> > MSI supports 2 messages, vector masks
> > found-> vendor=0x8086, dev=0x340a, revid=0x13
> > domain=0, bus=0, slot=3, func=0
> > class=06-04-00, hdrtype=0x01, mfdev=0
> > cmdreg=0x0147, statreg=0x0010, cachelnsz=64 (dwords)
> > lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns)
> > powerspec 3 supports D0 D3 current D0
> > MSI supports 2 messages, vector masks
> > found-> vendor=0x8086, dev=0x340e, revid=0x13
> > domain=0, bus=0, slot=7, func=0
> > class=06-04-00, hdrtype=0x01, mfdev=0
> > cmdreg=0x0144, statreg=0x0010, cachelnsz=64 (dwords)
> > lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns)
> > powerspec 3 supports D0 D3 current D0
> > MSI supports 2 messages, vector masks
> > found-> vendor=0x8086, dev=0x3410, revid=0x13
> > domain=0, bus=0, slot=9, func=0
> > class=06-04-00, hdrtype=0x01, mfdev=0
> > cmdreg=0x0147, statreg=0x0010, cachelnsz=64 (dwords)
> > lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns)
> > powerspec 3 supports D0 D3 current D0
> > MSI supports 2 messages, vector masks
> > found-> vendor=0x8086, dev=0x342e, revid=0x13
> > domain=0, bus=0, slot=20, func=0
> > class=08-00-00, hdrtype=0x00, mfdev=1
> > cmdreg=0x0000, statreg=0x0010, cachelnsz=64 (dwords)
> > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
> > found-> vendor=0x8086, dev=0x3422, revid=0x13
> > domain=0, bus=0, slot=20, func=1
> > class=08-00-00, hdrtype=0x00, mfdev=1
> > cmdreg=0x0000, statreg=0x0010, cachelnsz=64 (dwords)
> > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
> > found-> vendor=0x8086, dev=0x3423, revid=0x13
> > domain=0, bus=0, slot=20, func=2
> > class=08-00-00, hdrtype=0x00, mfdev=1
> > cmdreg=0x0000, statreg=0x0010, cachelnsz=64 (dwords)
> > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
> > found-> vendor=0x8086, dev=0x3a37, revid=0x00
> > domain=0, bus=0, slot=26, func=0
> > class=0c-03-00, hdrtype=0x00, mfdev=1
> > cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
> > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
> > intpin=a, irq=10
> > map[20]: type I/O Port, range 32, base 0xa800, size 5, enabled
> > pcib0: matched entry for 0.26.INTA
> > pcib0: slot 26 INTA hardwired to IRQ 16
> > found-> vendor=0x8086, dev=0x3a3c, revid=0x00
> > domain=0, bus=0, slot=26, func=7
> > class=0c-03-20, hdrtype=0x00, mfdev=0
> > cmdreg=0x0046, statreg=0x0290, cachelnsz=0 (dwords)
> > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
> > intpin=c, irq=15
> > powerspec 2 supports D0 D3 current D0
> > map[10]: type Memory, range 32, base 0xfa7f8000, size 10, enabled
> > pcib0: matched entry for 0.26.INTC
> > pcib0: slot 26 INTC hardwired to IRQ 18
> > found-> vendor=0x8086, dev=0x3a40, revid=0x00
> > domain=0, bus=0, slot=28, func=0
> > class=06-04-00, hdrtype=0x01, mfdev=1
> > cmdreg=0x0146, statreg=0x0010, cachelnsz=64 (dwords)
> > lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns)
> > intpin=a, irq=10
> > powerspec 2 supports D0 D3 current D0
> > MSI supports 1 message
> > pcib0: matched entry for 0.28.INTA
> > pcib0: slot 28 INTA hardwired to IRQ 16
> > found-> vendor=0x8086, dev=0x3a48, revid=0x00
> > domain=0, bus=0, slot=28, func=4
> > class=06-04-00, hdrtype=0x01, mfdev=1
> > cmdreg=0x0007, statreg=0x0810, cachelnsz=64 (dwords)
> > lattimer=0x00 (0 ns), mingnt=0x1a (6500 ns), maxlat=0x00 (0 ns)
> > intpin=a, irq=10
> > powerspec 2 supports D0 D3 current D0
> > MSI supports 1 message
> > pcib0: matched entry for 0.28.INTA
> > pcib0: slot 28 INTA hardwired to IRQ 16
> > found-> vendor=0x8086, dev=0x3a34, revid=0x00
> > domain=0, bus=0, slot=29, func=0
> > class=0c-03-00, hdrtype=0x00, mfdev=1
> > cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
> > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
> > intpin=a, irq=14
> > map[20]: type I/O Port, range 32, base 0xa880, size 5, enabled
> > pcib0: matched entry for 0.29.INTA
> > pcib0: slot 29 INTA hardwired to IRQ 23
> > found-> vendor=0x8086, dev=0x3a35, revid=0x00
> > domain=0, bus=0, slot=29, func=1
> > class=0c-03-00, hdrtype=0x00, mfdev=0
> > cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
> > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
> > intpin=b, irq=11
> > map[20]: type I/O Port, range 32, base 0xac00, size 5, enabled
> > pcib0: matched entry for 0.29.INTB
> > pcib0: slot 29 INTB hardwired to IRQ 19
> > found-> vendor=0x8086, dev=0x3a36, revid=0x00
> > domain=0, bus=0, slot=29, func=2
> > class=0c-03-00, hdrtype=0x00, mfdev=0
> > cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
> > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
> > intpin=c, irq=15
> > map[20]: type I/O Port, range 32, base 0xb000, size 5, enabled
> > pcib0: matched entry for 0.29.INTC
> > pcib0: slot 29 INTC hardwired to IRQ 18
> > found-> vendor=0x8086, dev=0x3a3a, revid=0x00
> > domain=0, bus=0, slot=29, func=7
> > class=0c-03-20, hdrtype=0x00, mfdev=0
> > cmdreg=0x0046, statreg=0x0290, cachelnsz=0 (dwords)
> > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
> > intpin=a, irq=14
> > powerspec 2 supports D0 D3 current D0
> > map[10]: type Memory, range 32, base 0xfa7fa000, size 10, enabled
> > pcib0: matched entry for 0.29.INTA
> > pcib0: slot 29 INTA hardwired to IRQ 23
> > found-> vendor=0x8086, dev=0x244e, revid=0x90
> > domain=0, bus=0, slot=30, func=0
> > class=06-04-01, hdrtype=0x01, mfdev=0
> > cmdreg=0x0144, statreg=0x0010, cachelnsz=0 (dwords)
> > lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
> > found-> vendor=0x8086, dev=0x3a16, revid=0x00
> > domain=0, bus=0, slot=31, func=0
> > class=06-01-00, hdrtype=0x00, mfdev=1
> > cmdreg=0x0147, statreg=0x0210, cachelnsz=0 (dwords)
> > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
> > found-> vendor=0x8086, dev=0x3a22, revid=0x00
> > domain=0, bus=0, slot=31, func=2
> > class=01-06-01, hdrtype=0x00, mfdev=0
> > cmdreg=0x0047, statreg=0x02b0, cachelnsz=0 (dwords)
> > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
> > intpin=b, irq=11
> > powerspec 3 supports D0 D3 current D0
> > MSI supports 16 messages
> > map[10]: type I/O Port, range 32, base 0xb880, size 3, enabled
> > map[14]: type I/O Port, range 32, base 0xb800, size 2, enabled
> > map[18]: type I/O Port, range 32, base 0xb480, size 3, enabled
> > map[1c]: type I/O Port, range 32, base 0xb400, size 2, enabled
> > map[20]: type I/O Port, range 32, base 0xb080, size 5, enabled
> > map[24]: type Memory, range 32, base 0xfa7fc000, size 11, enabled
> > pcib0: matched entry for 0.31.INTB
> > pcib0: slot 31 INTB hardwired to IRQ 19
> > pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
> > pcib1: domain 0
> > pcib1: secondary bus 7
> > pcib1: subordinate bus 7
> > pcib1: I/O decode 0xe000-0xefff
> > pcib1: memory decode 0xfbe00000-0xfbefffff
> > pcib1: no prefetched decode
> > pci7: <ACPI PCI bus> on pcib1
> > pci7: domain=0, physical bus=7
> > found-> vendor=0x8086, dev=0x10c9, revid=0x01
> > domain=0, bus=7, slot=0, func=0
> > class=02-00-00, hdrtype=0x00, mfdev=1
> > cmdreg=0x0147, statreg=0x0010, cachelnsz=64 (dwords)
> > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
> > intpin=a, irq=10
> > powerspec 3 supports D0 D3 current D0
> > MSI supports 1 message, 64 bit, vector masks
> > MSI-X supports 10 messages in map 0x1c
> > map[10]: type Memory, range 32, base 0xfbe60000, size 17, enabled
> > pcib1: requested memory range 0xfbe60000-0xfbe7ffff: good
> > map[14]: type Memory, range 32, base 0xfbe40000, size 17, enabled
> > pcib1: requested memory range 0xfbe40000-0xfbe5ffff: good
> > map[18]: type I/O Port, range 32, base 0xe880, size 5, enabled
> > pcib1: requested I/O range 0xe880-0xe89f: in range
> > map[1c]: type Memory, range 32, base 0xfbeb8000, size 14, enabled
> > pcib1: requested memory range 0xfbeb8000-0xfbebbfff: good
> > pcib1: matched entry for 7.0.INTA
> > pcib1: slot 0 INTA hardwired to IRQ 28
> > found-> vendor=0x8086, dev=0x10c9, revid=0x01
> > domain=0, bus=7, slot=0, func=1
> > class=02-00-00, hdrtype=0x00, mfdev=1
> > cmdreg=0x0147, statreg=0x0010, cachelnsz=64 (dwords)
> > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
> > intpin=b, irq=5
> > powerspec 3 supports D0 D3 current D0
> > MSI supports 1 message, 64 bit, vector masks
> > MSI-X supports 10 messages in map 0x1c
> > map[10]: type Memory, range 32, base 0xfbee0000, size 17, enabled
> > pcib1: requested memory range 0xfbee0000-0xfbefffff: good
> > map[14]: type Memory, range 32, base 0xfbec0000, size 17, enabled
> > pcib1: requested memory range 0xfbec0000-0xfbedffff: good
> > map[18]: type I/O Port, range 32, base 0xec00, size 5, enabled
> > pcib1: requested I/O range 0xec00-0xec1f: in range
> > map[1c]: type Memory, range 32, base 0xfbebc000, size 14, enabled
> > pcib1: requested memory range 0xfbebc000-0xfbebffff: good
> > pcib1: matched entry for 7.0.INTB
> > pcib1: slot 0 INTB hardwired to IRQ 40
> > igb0: <Intel(R) PRO/1000 Network Connection version - 1.7.3> port
> > 0xe880-0xe89f mem
> > 0xfbe60000-0xfbe7ffff,0xfbe40000-0xfbe5ffff,0xfbeb8000-0xfbebbfff irq 28
> at
> > device 0.0 on pci7
> > igb0: Reserved 0x20000 bytes for rid 0x10 type 3 at 0xfbe60000
> > igb0: Reserved 0x4000 bytes for rid 0x1c type 3 at 0xfbeb8000
> > igb0: attempting to allocate 3 MSI-X vectors (10 supported)
> > msi: routing MSI-X IRQ 256 to local APIC 16 vector 49
> > msi: routing MSI-X IRQ 257 to local APIC 16 vector 50
> > msi: routing MSI-X IRQ 258 to local APIC 16 vector 51
> > igb0: using IRQs 256-258 for MSI-X
> > igb0: Using MSIX interrupts with 3 vectors
> > igb0: [MPSAFE]
> > igb0: [ITHREAD]
> > igb0: [MPSAFE]
> > igb0: [ITHREAD]
> > igb0: [MPSAFE]
> > igb0: [ITHREAD]
> > igb0: bpf attached
> > igb0: Ethernet address: d8:d3:85:b5:ec:2e
> > igb1: <Intel(R) PRO/1000 Network Connection version - 1.7.3> port
> > 0xec00-0xec1f mem
> > 0xfbee0000-0xfbefffff,0xfbec0000-0xfbedffff,0xfbebc000-0xfbebffff irq 40
> at
> > device 0.1 on pci7
> > igb1: Reserved 0x20000 bytes for rid 0x10 type 3 at 0xfbee0000
> > igb1: Reserved 0x4000 bytes for rid 0x1c type 3 at 0xfbebc000
> > igb1: attempting to allocate 3 MSI-X vectors (10 supported)
> > msi: routing MSI-X IRQ 259 to local APIC 16 vector 52
> > msi: routing MSI-X IRQ 260 to local APIC 16 vector 53
> > msi: routing MSI-X IRQ 261 to local APIC 16 vector 54
> > igb1: using IRQs 259-261 for MSI-X
> > igb1: Using MSIX interrupts with 3 vectors
> > igb1: [MPSAFE]
> > igb1: [ITHREAD]
> > igb1: [MPSAFE]
> > igb1: [ITHREAD]
> > igb1: [MPSAFE]
> > igb1: [ITHREAD]
> > igb1: bpf attached
> > igb1: Ethernet address: d8:d3:85:b5:ec:2f
> > pcib2: <ACPI PCI-PCI bridge> at device 3.0 on pci0
> > pcib2: domain 0
> > pcib2: secondary bus 6
> > pcib2: subordinate bus 6
> > pcib2: I/O decode 0xd000-0xdfff
> > pcib2: memory decode 0xfb800000-0xfbdfffff
> > pcib2: no prefetched decode
> > pci6: <ACPI PCI bus> on pcib2
> > pci6: domain=0, physical bus=6
> > found-> vendor=0x103c, dev=0x323a, revid=0x01
> > domain=0, bus=6, slot=0, func=0
> > class=01-04-00, hdrtype=0x00, mfdev=0
> > cmdreg=0x0047, statreg=0x0010, cachelnsz=64 (dwords)
> > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
> > intpin=a, irq=10
> > powerspec 3 supports D0 D1 D3 current D0
> > MSI supports 1 message, 64 bit
> > MSI-X supports 16 messages in map 0x10
> > map[10]: type Memory, range 64, base 0xfb800000, size 22, enabled
> > pcib2: requested memory range 0xfb800000-0xfbbfffff: good
> > map[18]: type Memory, range 64, base 0xfbdff000, size 12, enabled
> > pcib2: requested memory range 0xfbdff000-0xfbdfffff: good
> > map[20]: type I/O Port, range 32, base 0xd800, size 8, enabled
> > pcib2: requested I/O range 0xd800-0xd8ff: in range
> > pcib2: matched entry for 6.0.INTA
> > pcib2: slot 0 INTA hardwired to IRQ 24
> > ciss0: <HP Smart Array P212> port 0xd800-0xd8ff mem
> > 0xfb800000-0xfbbfffff,0xfbdff000-0xfbdfffff irq 24 at device 0.0 on pci6
> > ciss0: Reserved 0x400000 bytes for rid 0x10 type 3 at 0xfb800000
> > ciss0: PERFORMANT Transport
> > ciss0: attempting to allocate 1 MSI-X vectors (16 supported)
> > msi: routing MSI-X IRQ 262 to local APIC 16 vector 55
> > ciss0: using IRQ 262 for MSI-X
> > ciss0: Using 1 MSIX interrupt
> > ciss0: [MPSAFE]
> > ciss0: [ITHREAD]
> > ciss0: using 32 of 32 available commands
> > ciss0: firmware 3.00
> > ciss0: 1 SCSI channels
> > ciss0: signature 'CISS'
> > ciss0: valence 3
> > ciss0: supported I/O methods 0x78000007<READY,simple,performant>
> > ciss0: active I/O method 0x5<performant>
> > ciss0: 4G page base 0x00000000
> > ciss0: interrupt coalesce delay 0us
> > ciss0: interrupt coalesce count 16
> > ciss0: max outstanding commands 32
> > ciss0: bus types 0x200000
> > ciss0: server name 'SGH931X7JB'
> > ciss0: heartbeat 0x2ba
> > ciss0: 2 physical devices
> > ciss0: 0 logical drives
> > pcib3: <ACPI PCI-PCI bridge> at device 7.0 on pci0
> > pcib3: domain 0
> > pcib3: secondary bus 5
> > pcib3: subordinate bus 5
> > pcib3: I/O decode 0x0-0x0
> > pcib3: no prefetched decode
> > pci5: <ACPI PCI bus> on pcib3
> > pci5: domain=0, physical bus=5
> > pcib4: <ACPI PCI-PCI bridge> at device 9.0 on pci0
> > pcib4: domain 0
> > pcib4: secondary bus 4
> > pcib4: subordinate bus 4
> > pcib4: I/O decode 0xc000-0xcfff
> > pcib4: memory decode 0xfb300000-0xfb7fffff
> > pcib4: no prefetched decode
> > pci4: <ACPI PCI bus> on pcib4
> > pci4: domain=0, physical bus=4
> > found-> vendor=0x103c, dev=0x323a, revid=0x01
> > domain=0, bus=4, slot=0, func=0
> > class=01-04-00, hdrtype=0x00, mfdev=0
> > cmdreg=0x0047, statreg=0x0010, cachelnsz=64 (dwords)
> > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
> > intpin=a, irq=10
> > powerspec 3 supports D0 D1 D3 current D0
> > MSI supports 1 message, 64 bit
> > MSI-X supports 16 messages in map 0x10
> > map[10]: type Memory, range 64, base 0xfb400000, size 22, enabled
> > pcib4: requested memory range 0xfb400000-0xfb7fffff: good
> > map[18]: type Memory, range 64, base 0xfb3ff000, size 12, enabled
> > pcib4: requested memory range 0xfb3ff000-0xfb3fffff: good
> > map[20]: type I/O Port, range 32, base 0xc800, size 8, enabled
> > pcib4: requested I/O range 0xc800-0xc8ff: in range
> > pcib4: matched entry for 4.0.INTA
> > pcib4: slot 0 INTA hardwired to IRQ 32
> > ciss1: <HP Smart Array P410> port 0xc800-0xc8ff mem
> > 0xfb400000-0xfb7fffff,0xfb3ff000-0xfb3fffff irq 32 at device 0.0 on pci4
> > ciss1: Reserved 0x400000 bytes for rid 0x10 type 3 at 0xfb400000
> > ciss1: PERFORMANT Transport
> > ciss1: attempting to allocate 1 MSI-X vectors (16 supported)
> > msi: routing MSI-X IRQ 263 to local APIC 16 vector 56
> > ciss1: using IRQ 263 for MSI-X
> > ciss1: Using 1 MSIX interrupt
> > ciss1: [MPSAFE]
> > ciss1: [ITHREAD]
> > ciss1: using 256 of 1024 available commands
> > ciss1: firmware 3.00
> > ciss1: 1 SCSI channels
> > ciss1: signature 'CISS'
> > ciss1: valence 3
> > ciss1: supported I/O methods 0x78000007<READY,simple,performant>
> > ciss1: active I/O method 0x5<performant>
> > ciss1: 4G page base 0x00000000
> > ciss1: interrupt coalesce delay 0us
> > ciss1: interrupt coalesce count 16
> > ciss1: max outstanding commands 1024
> > ciss1: bus types 0x200000
> > ciss1: server name 'USE179N286'
> > ciss1: heartbeat 0x270
> > ciss1: 5 physical devices
> > ciss1: 1 logical drive
> > ciss1: logical drive (b0t0): RAID ADG, 1907200MB online
> > pci0: <base peripheral, interrupt controller> at device 20.0 (no driver
> > attached)
> > pci0: <base peripheral, interrupt controller> at device 20.1 (no driver
> > attached)
> > pci0: <base peripheral, interrupt controller> at device 20.2 (no driver
> > attached)
> > uhci0: <UHCI (generic) USB controller> port 0xa800-0xa81f irq 16 at
> device
> > 26.0 on pci0
> > uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0xa800
> > ioapic0: routing intpin 16 (PCI IRQ 16) to lapic 16 vector 57
> > uhci0: [MPSAFE]
> > uhci0: [ITHREAD]
> > uhci0: LegSup = 0x0430
> > usbus0: <UHCI (generic) USB controller> on uhci0
> > ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfa7f8000-0xfa7f83ff irq
> 18
> > at device 26.7 on pci0
> > ehci0: Reserved 0x400 bytes for rid 0x10 type 3 at 0xfa7f8000
> > ioapic0: routing intpin 18 (PCI IRQ 18) to lapic 16 vector 58
> > ehci0: [MPSAFE]
> > ehci0: [ITHREAD]
> > usbus1: EHCI version 1.0
> > usbus1: <EHCI (generic) USB 2.0 controller> on ehci0
> > pcib5: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
> > pcib5: domain 0
> > pcib5: secondary bus 3
> > pcib5: subordinate bus 3
> > pcib5: I/O decode 0x0-0x0
> > pcib5: prefetched decode 0xf9f00000-0xf9ffffff
> > pci3: <ACPI PCI bus> on pcib5
> > pci3: domain=0, physical bus=3
> > pcib6: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0
> > pcib6: domain 0
> > pcib6: secondary bus 2
> > pcib6: subordinate bus 2
> > pcib6: I/O decode 0xf000-0xfff
> > pcib6: memory decode 0xfa800000-0xfb2fffff
> > pcib6: prefetched decode 0xf8000000-0xf8ffffff
> > pci2: <ACPI PCI bus> on pcib6
> > pci2: domain=0, physical bus=2
> > found-> vendor=0x102b, dev=0x0522, revid=0x02
> > domain=0, bus=2, slot=0, func=0
> > class=03-00-00, hdrtype=0x00, mfdev=0
> > cmdreg=0x0047, statreg=0x1010, cachelnsz=64 (dwords)
> > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
> > intpin=a, irq=10
> > powerspec 2 supports D0 D3 current D0
> > MSI supports 1 message
> > map[10]: type Prefetchable Memory, range 32, base 0xf8000000, size
> > 24, enabled
> > pcib6: requested memory range 0xf8000000-0xf8ffffff: good
> > map[14]: type Memory, range 32, base 0xfb2fc000, size 14, enabled
> > pcib6: requested memory range 0xfb2fc000-0xfb2fffff: good
> > map[18]: type Memory, range 32, base 0xfa800000, size 23, enabled
> > pcib6: requested memory range 0xfa800000-0xfaffffff: good
> > pcib6: matched entry for 2.0.INTA
> > pcib6: slot 0 INTA hardwired to IRQ 16
> > vgapci0: <VGA-compatible display> mem
> > 0xf8000000-0xf8ffffff,0xfb2fc000-0xfb2fffff,0xfa800000-0xfaffffff irq 16
> at
> > device 0.0 on pci2
> > uhci1: <UHCI (generic) USB controller> port 0xa880-0xa89f irq 23 at
> device
> > 29.0 on pci0
> > uhci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0xa880
> > ioapic0: routing intpin 23 (PCI IRQ 23) to lapic 16 vector 59
> > uhci1: [MPSAFE]
> > uhci1: [ITHREAD]
> > uhci1: LegSup = 0x0430
> > usbus2: <UHCI (generic) USB controller> on uhci1
> > uhci2: <UHCI (generic) USB controller> port 0xac00-0xac1f irq 19 at
> device
> > 29.1 on pci0
> > uhci2: Reserved 0x20 bytes for rid 0x20 type 4 at 0xac00
> > ioapic0: routing intpin 19 (PCI IRQ 19) to lapic 16 vector 60
> > uhci2: [MPSAFE]
> > uhci2: [ITHREAD]
> > uhci2: LegSup = 0x0430
> > usbus3: <UHCI (generic) USB controller> on uhci2
> > uhci3: <UHCI (generic) USB controller> port 0xb000-0xb01f irq 18 at
> device
> > 29.2 on pci0
> > uhci3: Reserved 0x20 bytes for rid 0x20 type 4 at 0xb000
> > uhci3: [MPSAFE]
> > uhci3: [ITHREAD]
> > uhci3: LegSup = 0x0430
> > usbus4: <UHCI (generic) USB controller> on uhci3
> > ehci1: <EHCI (generic) USB 2.0 controller> mem 0xfa7fa000-0xfa7fa3ff irq
> 23
> > at device 29.7 on pci0
> > ehci1: Reserved 0x400 bytes for rid 0x10 type 3 at 0xfa7fa000
> > ehci1: [MPSAFE]
> > ehci1: [ITHREAD]
> > usbus5: EHCI version 1.0
> > usbus5: <EHCI (generic) USB 2.0 controller> on ehci1
> > pcib7: <ACPI PCI-PCI bridge> at device 30.0 on pci0
> > pcib7: domain 0
> > pcib7: secondary bus 1
> > pcib7: subordinate bus 1
> > pcib7: I/O decode 0x0-0x0
> > pcib7: no prefetched decode
> > pcib7: Subtractively decoded bridge.
> > pcib7: could not get PCI interrupt routing table for \\_SB_.PCI0.P0P1 -
> > AE_NOT_FOUND
> > pci1: <ACPI PCI bus> on pcib7
> > pci1: domain=0, physical bus=1
> > isab0: <PCI-ISA bridge> at device 31.0 on pci0
> > isa0: <ISA bus> on isab0
> > atapci0: <Intel ICH10 SATA300 controller> port
> > 0xb880-0xb887,0xb800-0xb803,0xb480-0xb487,0xb400-0xb403,0xb080-0xb09f mem
> > 0xfa7fc000-0xfa7fc7ff irq 19 at device 31.2 on pci0
> > atapci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0xb080
> > atapci0: [MPSAFE]
> > atapci0: [ITHREAD]
> > atapci0: Reserved 0x800 bytes for rid 0x24 type 3 at 0xfa7fc000
> > atapci0: AHCI called from vendor specific driver
> > atapci0: AHCI v1.20 controller with 6 1.5Gbps ports, PM not supported
> > atapci0: Caps: 64bit NCQ SNTF SS ALP AL CLO 1.5Gbps PMD SSC PSC 32cmd CCC
> EM
> > eSATA 6ports
> > ata2: <ATA channel 0> on atapci0
> > ata2: AHCI reset...
> > ata2: hardware reset ...
> > ata2: SATA connect timeout status=00000000
> > ata2: AHCI reset done: phy reset found no device
> > ata2: [MPSAFE]
> > ata2: [ITHREAD]
> > ata3: <ATA channel 1> on atapci0
> > ata3: AHCI reset...
> > ata3: hardware reset ...
> > ata3: SATA connect timeout status=00000000
> > ata3: AHCI reset done: phy reset found no device
> > ata3: [MPSAFE]
> > ata3: [ITHREAD]
> > ata4: <ATA channel 2> on atapci0
> > ata4: AHCI reset...
> > ata4: hardware reset ...
> > ata4: SATA connect timeout status=00000000
> > ata4: AHCI reset done: phy reset found no device
> > ata4: [MPSAFE]
> > ata4: [ITHREAD]
> > ata5: <ATA channel 3> on atapci0
> > ata5: AHCI reset...
> > ata5: hardware reset ...
> > ata5: SATA connect timeout status=00000000
> > ata5: AHCI reset done: phy reset found no device
> > ata5: [MPSAFE]
> > ata5: [ITHREAD]
> > ata6: <ATA channel 4> on atapci0
> > ata6: AHCI reset...
> > ata6: hardware reset ...
> > ata6: SATA connect time=0ms status=00000113
> > ata6: ready wait time=0ms
> > ata6: software reset port 0...
> > ata6: ready wait time=0ms
> > ata6: SIGNATURE: eb140101
> > ata6: AHCI reset done: devices=00010000
> > ata6: [MPSAFE]
> > ata6: [ITHREAD]
> > ata7: <ATA channel 5> on atapci0
> > ata7: AHCI reset...
> > ata7: hardware reset ...
> > ata7: SATA connect timeout status=00000000
> > ata7: AHCI reset done: phy reset found no device
> > ata7: [MPSAFE]
> > ata7: [ITHREAD]
> > acpi_button0: <Power Button> on acpi0
> > atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
> > atrtc0: registered as a time-of-day clock (resolution 1000000us)
> > uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
> > ioapic0: routing intpin 4 (ISA IRQ 4) to lapic 16 vector 61
> > uart0: [FILTER]
> > uart0: fast interrupt
> > cpu0: <ACPI CPU> on acpi0
> > ACPI: SSDT 0xbf77e1c0 013CC (v1 DpgPmm P001Ist 00000011 INTL 20051117)
> > ACPI: SSDT 0xbf77f590 00659 (v1 PmRef P001Cst 00003001 INTL 20051117)
> > est0: <Enhanced SpeedStep Frequency Control> on cpu0
> > est0: Invalid id16 (set, cur) = (16, 17)
> > est0: Invalid freq 2133, ignored.
> > est0: Invalid id16 (set, cur) = (15, 17)
> > est0: Invalid freq 2000, ignored.
> > est0: Invalid id16 (set, cur) = (14, 17)
> > est0: Invalid freq 1867, ignored.
> > est0: Invalid id16 (set, cur) = (13, 17)
> > est0: Invalid freq 1733, ignored.
> > est0: Invalid id16 (set, cur) = (12, 17)
> > est0: Invalid freq 1600, ignored.
> > p4tcc0: <CPU Frequency Thermal Control> on cpu0
> > cpu1: <ACPI CPU> on acpi0
> > est1: <Enhanced SpeedStep Frequency Control> on cpu1
> > est1: Invalid id16 (set, cur) = (16, 17)
> > est1: Invalid freq 2133, ignored.
> > est1: Invalid id16 (set, cur) = (15, 17)
> > est1: Invalid freq 2000, ignored.
> > est1: Invalid id16 (set, cur) = (14, 17)
> > est1: Invalid freq 1867, ignored.
> > est1: Invalid id16 (set, cur) = (13, 17)
> > est1: Invalid freq 1733, ignored.
> > est1: Invalid id16 (set, cur) = (12, 17)
> > est1: Invalid freq 1600, ignored.
> > p4tcc1: <CPU Frequency Thermal Control> on cpu1
> > cpu2: <ACPI CPU> on acpi0
> > est2: <Enhanced SpeedStep Frequency Control> on cpu2
> > est2: Invalid id16 (set, cur) = (16, 17)
> > est2: Invalid freq 2133, ignored.
> > est2: Invalid id16 (set, cur) = (15, 17)
> > est2: Invalid freq 2000, ignored.
> > est2: Invalid id16 (set, cur) = (14, 17)
> > est2: Invalid freq 1867, ignored.
> > est2: Invalid id16 (set, cur) = (13, 17)
> > est2: Invalid freq 1733, ignored.
> > est2: Invalid id16 (set, cur) = (12, 17)
> > est2: Invalid freq 1600, ignored.
> > p4tcc2: <CPU Frequency Thermal Control> on cpu2
> > cpu3: <ACPI CPU> on acpi0
> > est3: <Enhanced SpeedStep Frequency Control> on cpu3
> > est3: Invalid id16 (set, cur) = (16, 17)
> > est3: Invalid freq 2133, ignored.
> > est3: Invalid id16 (set, cur) = (15, 17)
> > est3: Invalid freq 2000, ignored.
> > est3: Invalid id16 (set, cur) = (14, 17)
> > est3: Invalid freq 1867, ignored.
> > est3: Invalid id16 (set, cur) = (13, 17)
> > est3: Invalid freq 1733, ignored.
> > est3: Invalid id16 (set, cur) = (12, 17)
> > est3: Invalid freq 1600, ignored.
> > p4tcc3: <CPU Frequency Thermal Control> on cpu3
> > cpu4: <ACPI CPU> on acpi0
> > est4: <Enhanced SpeedStep Frequency Control> on cpu4
> > est4: Invalid id16 (set, cur) = (16, 17)
> > est4: Invalid freq 2133, ignored.
> > est4: Invalid id16 (set, cur) = (15, 17)
> > est4: Invalid freq 2000, ignored.
> > est4: Invalid id16 (set, cur) = (14, 17)
> > est4: Invalid freq 1867, ignored.
> > est4: Invalid id16 (set, cur) = (13, 17)
> > est4: Invalid freq 1733, ignored.
> > est4: Invalid id16 (set, cur) = (12, 17)
> > est4: Invalid freq 1600, ignored.
> > p4tcc4: <CPU Frequency Thermal Control> on cpu4
> > cpu5: <ACPI CPU> on acpi0
> > est5: <Enhanced SpeedStep Frequency Control> on cpu5
> > est5: Invalid id16 (set, cur) = (16, 17)
> > est5: Invalid freq 2133, ignored.
> > est5: Invalid id16 (set, cur) = (15, 17)
> > est5: Invalid freq 2000, ignored.
> > est5: Invalid id16 (set, cur) = (14, 17)
> > est5: Invalid freq 1867, ignored.
> > est5: Invalid id16 (set, cur) = (13, 17)
> > est5: Invalid freq 1733, ignored.
> > est5: Invalid id16 (set, cur) = (12, 17)
> > est5: Invalid freq 1600, ignored.
> > p4tcc5: <CPU Frequency Thermal Control> on cpu5
> > cpu6: <ACPI CPU> on acpi0
> > est6: <Enhanced SpeedStep Frequency Control> on cpu6
> > est6: Invalid id16 (set, cur) = (16, 17)
> > est6: Invalid freq 2133, ignored.
> > est6: Invalid id16 (set, cur) = (15, 17)
> > est6: Invalid freq 2000, ignored.
> > est6: Invalid id16 (set, cur) = (14, 17)
> > est6: Invalid freq 1867, ignored.
> > est6: Invalid id16 (set, cur) = (13, 17)
> > est6: Invalid freq 1733, ignored.
> > est6: Invalid id16 (set, cur) = (12, 17)
> > est6: Invalid freq 1600, ignored.
> > p4tcc6: <CPU Frequency Thermal Control> on cpu6
> > cpu7: <ACPI CPU> on acpi0
> > est7: <Enhanced SpeedStep Frequency Control> on cpu7
> > est7: Invalid id16 (set, cur) = (16, 17)
> > est7: Invalid freq 2133, ignored.
> > est7: Invalid id16 (set, cur) = (15, 17)
> > est7: Invalid freq 2000, ignored.
> > est7: Invalid id16 (set, cur) = (14, 17)
> > est7: Invalid freq 1867, ignored.
> > est7: Invalid id16 (set, cur) = (13, 17)
> > est7: Invalid freq 1733, ignored.
> > est7: Invalid id16 (set, cur) = (12, 17)
> > est7: Invalid freq 1600, ignored.
> > p4tcc7: <CPU Frequency Thermal Control> on cpu7
> > unknown: status reg test failed ff
> > unknown: status reg test failed ff
> > unknown: status reg test failed ff
> > unknown: status reg test failed ff
> > unknown: status reg test failed ff
> > unknown: status reg test failed ff
> > ahc_isa_probe 0: ioport 0xc00 alloc failed
> > ahc_isa_probe 10: ioport 0xac00 alloc failed
> > ahc_isa_probe 14: ioport 0xec00 alloc failed
> > pnp_identify: Trying Read_Port at 203
> > pnp_identify: Trying Read_Port at 243
> > pnp_identify: Trying Read_Port at 283
> > pnp_identify: Trying Read_Port at 2c3
> > pnp_identify: Trying Read_Port at 303
> > pnp_identify: Trying Read_Port at 343
> > pnp_identify: Trying Read_Port at 383
> > pnp_identify: Trying Read_Port at 3c3
> > PNP Identify complete
> > ex_isa_identify()
> > isa_probe_children: disabling PnP devices
> > pmtimer0 on isa0
> > atrtc: atrtc0 already exists; skipping it
> > sc: sc0 already exists; skipping it
> > uart: uart0 already exists; skipping it
> > isa_probe_children: probing non-PnP devices
> > orm0: <ISA Option ROMs> at iomem
> > 0xc0000-0xc7fff,0xc8000-0xc8fff,0xc9000-0xccfff pnpid ORM0000 on isa0
> > atkbd: the current kbd controller command byte 0087
> > atkbd: keyboard ID 0x83ab (2)
> > sc0: <System console> at flags 0x100 on isa0
> > sc0: VGA <16 virtual consoles, flags=0x300>
> > sc0: fb0, kbd1, terminal emulator: scteken (teken terminal)
> > vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
> > ata0 at port 0x1f0-0x1f7,0x3f6 irq 14 on isa0
> > ata0: reset tp1 mask=00 ostat0=ff ostat1=ff
> > ioapic0: routing intpin 14 (ISA IRQ 14) to lapic 16 vector 62
> > ata0: [MPSAFE]
> > ata0: [ITHREAD]
> > ata1 at port 0x170-0x177,0x376 irq 15 on isa0
> > ata1: reset tp1 mask=00 ostat0=ff ostat1=ff
> > ioapic0: routing intpin 15 (ISA IRQ 15) to lapic 16 vector 63
> > ata1: [MPSAFE]
> > ata1: [ITHREAD]
> > atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
> > atkbd0: <AT Keyboard> irq 1 on atkbdc0
> > kbd0 at atkbd0
> > kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
> > ioapic0: routing intpin 1 (ISA IRQ 1) to lapic 16 vector 64
> > atkbd0: [GIANT-LOCKED]
> > atkbd0: [ITHREAD]
> > psm0: current command byte:0087
> > psm0: <PS/2 Mouse> irq 12 on atkbdc0
> > ioapic0: routing intpin 12 (ISA IRQ 12) to lapic 16 vector 65
> > psm0: [GIANT-LOCKED]
> > psm0: [ITHREAD]
> > psm0: model GlidePoint, device ID 0-00, 3 buttons
> > psm0: config:00000000, flags:00000008, packet size:3
> > psm0: syncmask:c0, syncbits:00
> > fdc0 failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
> > ppc0: parallel port not found.
> > ppc0: <Parallel port> failed to probe at irq 7 on isa0
> > uart1: <ns8250> failed to probe at port 0x2f8-0x2ff irq 3 on isa0
> > isa_probe_children: probing PnP devices
> > Device configuration finished.
> > Reducing kern.maxvnodes 197947 -> 100000
> > procfs registered
> > lapic: Divisor 2, Frequency 66669465 hz
> > Timecounter "TSC" frequency 2266761792 Hz quality -100
> > Timecounters tick every 1.000 msec
> > lo0: bpf attached
> > hptrr: no controller detected.
> > ata0: Identifying devices: 00000000
> > ata0: New devices: 00000000
> > ata1: Identifying devices: 00000000
> > ata1: New devices: 00000000
> > ata2: Identifying devices: 00000000
> > ata2: New devices: 00000000
> > ata3: Identifying devices: 00000000
> > ata3: New devices: 00000000
> > ata4: Identifying devices: 00000000
> > ata4: New devices: 00000000
> > ata5: Identifying devices: 00000000
> > ata5: New devices: 00000000
> > ata6: Identifying devices: 00010000
> > ata6: New devices: 00010000
> > usbus0: 12Mbps Full Speed USB v1.0
> > usbus1: 480Mbps High Speed USB v2.0
> > usbus2: 12Mbps Full Speed USB v1.0
> > usbus3: 12Mbps Full Speed USB v1.0
> > usbus4: 12Mbps Full Speed USB v1.0
> > usbus5: 480Mbps High Speed USB v2.0
> > ugen0.1: <Intel> at usbus0
> > uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
> > ugen1.1: <Intel> at usbus1
> > uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
> > ugen2.1: <Intel> at usbus2
> > uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
> > ugen3.1: <Intel> at usbus3
> > uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
> > ugen4.1: <Intel> at usbus4
> > uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
> > ugen5.1: <Intel> at usbus5
> > uhub5: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus5
> > ata6-master: pio=PIO4 wdma=WDMA2 udma=UDMA100 cable=40 wire
> > ata6: device_reset timeout=330us
> > acd0: <Optiarc DVD RW AD-7561S/AH52> DVDR drive at ata6 as master
> > acd0: read 4134KB/s (4134KB/s) write 4134KB/s (4134KB/s), 2048KB buffer,
> > SATA150
> > acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, DVDRAM, packet
> > acd0: Writes: CDR, CDRW, DVDR, DVDRAM, test write, burnproof
> > acd0: Audio: play, 256 volume levels
> > acd0: Mechanism: ejectable tray, unlocked
> > acd0: Medium: no/blank disc
> > ata7: Identifying devices: 00000000
> > ata7: New devices: 00000000
> > uhub0: 2 ports with 2 removable, self powered
> > uhub2: 2 ports with 2 removable, self powered
> > uhub3: 2 ports with 2 removable, self powered
> > uhub4: 2 ports with 2 removable, self powered
> > uhub1: 2 ports with 2 removable, self powered
> > uhub5: 6 ports with 6 removable, self powered
> > pass0 at ciss0 bus 32 target 6 lun 0
> > pass0: <HP Ultrium 4-SCSI U52W> Removable Sequential Access SCSI-5 device
> > pass0: Serial Number HU101099DY
> > pass0: 135.168MB/s transfers
> > pass0: Command Queueing enabled
> > pass1 at ciss1 bus 0 target 0 lun 0
> > pass1: <COMPAQ RAID ADGVOLUME OK> Fixed Direct Access SCSI-5 device
> > pass1: Serial Number PACCCOMPAQ RAID
> > pass1: 135.168MB/s transfers
> > pass1: Command Queueing enabled
> > sa0 at ciss0 bus 32 target 6 lun 0
> > sa0: <HP Ultrium 4-SCSI U52W> Removable Sequential Access SCSI-5 device
> > sa0: Serial Number HU101099DY
> > sa0: 135.168MB/s transfers
> > sa0: Command Queueing enabled
> > GEOM: new disk da0da0 at ciss1 bus 0 target 0 lun 0
> > da0: <COMPAQ RAID ADGVOLUME OK> Fixed Direct Access SCSI-5 device
> > da0: Serial Number PACCCOMPAQ RAID
> > da0: 135.168MB/s transfers
> > da0: Command Queueing enabled
> > da0: 1907675MB (3906918832 512 byte sectors: 255H 32S/T 65535C)
> >
> > ATA PseudoRAID loaded
> > SMP: AP CPU #3 Launched!
> > cpu3 AP:
> > ID: 0x13000000 VER: 0x00060015 LDR: 0x00000000 DFR: 0xffffffff
> > lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
> > timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010400
> > SMP: AP CPU #7 Launched!
> > cpu7 AP:
> > ID: 0x17000000 VER: 0x00060015 LDR: 0x00000000 DFR: 0xffffffff
> > lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
> > timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010400
> > SMP: AP CPU #2 Launched!
> > cpu2 AP:
> > ID: 0x12000000 VER: 0x00060015 LDR: 0x00000000 DFR: 0xffffffff
> > lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
> > timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010400
> > SMP: AP CPU #1 Launched!
> > cpu1 AP:
> > ID: 0x11000000 VER: 0x00060015 LDR: 0x00000000 DFR: 0xffffffff
> > lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
> > timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010400
> > SMP: AP CPU #6 Launched!
> > cpu6 AP:
> > ID: 0x16000000 VER: 0x00060015 LDR: 0x00000000 DFR: 0xffffffff
> > lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
> > timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010400
> > SMP: AP CPU #4 Launched!
> > cpu4 AP:
> > ID: 0x14000000 VER: 0x00060015 LDR: 0x00000000 DFR: 0xffffffff
> > lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
> > timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010400
> > SMP: AP CPU #5 Launched!
> > cpu5 AP:
> > ID: 0x15000000 VER: 0x00060015 LDR: 0x00000000 DFR: 0xffffffff
> > lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
> > timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010400
> > ioapic0: routing intpin 4 (ISA IRQ 4) to lapic 17 vector 48
> > ioapic0: routing intpin 9 (ISA IRQ 9) to lapic 18 vector 48
> > ioapic0: routing intpin 12 (ISA IRQ 12) to lapic 19 vector 48
> > ioapic0: routing intpin 14 (ISA IRQ 14) to lapic 20 vector 48
> > ioapic0: routing intpin 15 (ISA IRQ 15) to lapic 21 vector 48
> > ioapic0: routing intpin 16 (PCI IRQ 16) to lapic 22 vector 48
> > ioapic0: routing intpin 18 (PCI IRQ 18) to lapic 23 vector 48
> > ioapic0: routing intpin 23 (PCI IRQ 23) to lapic 17 vector 49
> > msi: Assigning MSI-X IRQ 256 to local APIC 18 vector 49
> > msi: Assigning MSI-X IRQ 257 to local APIC 19 vector 49
> > msi: Assigning MSI-X IRQ 258 to local APIC 20 vector 49
> > msi: Assigning MSI-X IRQ 259 to local APIC 21 vector 49
> > msi: Assigning MSI-X IRQ 260 to local APIC 22 vector 49
> > msi: Assigning MSI-X IRQ 261 to local APIC 23 vector 49
> > msi: Assigning MSI-X IRQ 263 to local APIC 17 vector 50
> > ugen3.2: <ATEN> at usbus3
> > ukbd0: <HID Keyboard> on usbus3
> > kbd2 at ukbd0
> > kbd2: ukbd0, generic (0), config:0x0, flags:0x3d0000
> > ums0: <HID Mouse> on usbus3
> > ums0: 5 buttons and [XYZ] coordinates ID=0
> > Trying to mount root from ufs:/dev/da0s1a
> > ct_to_ts([2010-07-07 09:48:52]) = 1278496132.000000000
> > start_init: trying /sbin/init
> > igb0: Link is up 1000 Mbps Full Duplex
> > igb0: link state changed to UP
> >
> >
> > while I don't have the cissutil with my freebsd even after I have
> installed
> > the ciss-vol-status? what actually is it ?
> >
> >
> > Frank
> > On Wed, Jul 7, 2010 at 12:28 AM, Sean Bruno <seanbru at yahoo-inc.com>
> wrote:
> >
> >> On Tue, 2010-07-06 at 05:40 -0700, Folkert Saathoff wrote:
> >>> actually we were having a similar experience with the smartarray
> p212...
> >> attached a SAS tape changer (tandbergdata lto-4 autoloader) to it, but
> could
> >> only see the tape drive, not the changer. in our case, the p212 was the
> >> second smartarray controller on the bus (ciss1), with a P410 as the
> primary
> >> one. i believe there's a bug about that as well. to contrast, another
> >> machine with an IBM serveraid SAS controller and the same tape changer
> works
> >> quite nicely out of the box with FreeBSD 8.0.
> >>>
> >>>
> >>> please get in touch with me if you're a developer and want to see a
> dmesg
> >> or similar.. :)
> >>>
> >>> cheers,
> >>> /folkert
> >>>
> >>
> >> If you could post verbose boot output + sudo cissutil --dump
> >>
> >> For example, my ciss controller on an HPDL180G5 looks like this:
> >>
> >> controller 0 (HP P400 )
> >> logical drives: 2
> >> running firmware 7.08
> >> stored firmware 7.08
> >> scsi bus count 1
> >> drives per scsi bus 16
> >> drives
> >> (b0t8,b0t9,b0t10,b0t11,b0t12,b0t13,b0t14,b0t15,b1t0,b1t1,b1t2,b1t3)
> >> scsi_bus_count 01
> >> Battery 0: Not Present/Discharged
> >> Cache is: Disabled
> >> Total write cache size = 212992 KB
> >> Write cache size = 212992 KB
> >> Read cache size = 0 KB
> >> Cache disabled map = 0x00000000
> >> Cache enabled on: (vol0,vol1)
> >> rebuild (64) priority 1 ms for every host command
> >> expand (64) priority 1 ms for every host command
> >> vol0
> >> Volume is bootable: YES
> >> 1 phys drives (b0t8)
> >> status OK
> >> failed drives (none)
> >> block size 512
> >> blocks available 585871964
> >> fault tolerance RAID0
> >> spare configured NO
> >> stripe size 128k
> >> vol1
> >> Volume is bootable: YES
> >> 5 phys drives (b0t15,b1t0,b1t1,b1t2,b1t3)
> >> status OK
> >> failed drives (none)
> >> block size 512
> >> blocks available 4294967295
> >> fault tolerance RAID0
> >> spare configured NO
> >> stripe size 128k
> >>
> >>
> >>
> > _______________________________________________
> > freebsd-scsi at freebsd.org mailing list
> > http://lists.freebsd.org/mailman/listinfo/freebsd-scsi
> > To unsubscribe, send any mail to "freebsd-scsi-unsubscribe at freebsd.org"
>
>
More information about the freebsd-scsi
mailing list