QLogic 2360 FC HBAs not playing well with others

[Hearn, Trevor]

I had the same exact problem. I just loaded 7.3, and the problem went away. 6.4, and 8.0 worked like a charm. 7.2 gave me the same response no matter what I did. 7.3 seems to have cured whatever it was that was outta whack. Sorry if the explanation wasn't as technical as it should be, but there ya go. :)

-Trevor
________________________________________
From: owner-freebsd-scsi at freebsd.org [owner-freebsd-scsi at freebsd.org] On Behalf Of Matthew Jacob [mj at feral.com]
Sent: Friday, April 09, 2010 2:30 PM
To: freebsd-scsi at freebsd.org
Subject: Re: QLogic 2360 FC HBAs not playing well with others

On 04/09/2010 11:29 AM, Brad Waite wrote:
> I beseech you, oh great masters of SCSI and fibre channel, hear my pleas
> for help!
>
> My 2 QLE2360s don't appear to be waking up properly in a Dell R710
> running 7.2 AMD64.  At the very least, they're not recognizing any of
> the volumes on the Sun 2540 array in the fabric.  Everything works just
> fine under VMware ESXi 4.1, though.
>

Get newer firmware either by upgrading with RELENG_7 or snagging
asm_2300.h from RELENG_7 and rebuilding.

You don't have to load all of ispfw

isp2300_LOAD=YES

should get you just that onemodule

the latest in the FreeBSD tree is 3.03.26

_______________________________________________
freebsd-scsi at freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-scsi
To unsubscribe, send any mail to "freebsd-scsi-unsubscribe at freebsd.org"