mfi(4) endless loop kernel output on attach
pluknet
pluknet at gmail.com
Thu Oct 15 10:38:11 UTC 2009
2009/10/15 pluknet <pluknet at gmail.com>:
> Hi.
>
> This is 7.2-R. Seen on IBM x3650M2.
>
> During the boot I get those endless looping kernel messages while on
> mfi(4) attach phase.
> It's getting more odd since 7.2 booted and worked fine on exactly this
> server model
> months ago (on different box though).. Any hints?
>
After the looked endless loop the kernel eventually finished
the mfi(4) initialization and continued its booting.
Is it expected to do so long initialization?
Almost at the end of kernel boot / near to multiuser start it panicked with:
panic: invalid ife->ifm_data (0xa) in mii_phy_setmedia
Though that's offtopic here.
>From last part of dmesg:
mfi0: 29365 (boot + 3s/0x0020/info) - Firmware initialization started
(PCI ID 0060/1000/0364/1014)
mfi0: 29366 (boot + 3s/0x0020/info) - Firmware version 1.40.62-0691
mfi0: 29367 (boot + 64s/0x0008/info) - Battery Present
mfi0: 29368 (boot + 64s/0x0020/info) - BBU FRU is
mfi0: 29369 (boot + 64s/0x0020/info) - Board Revision
mfi0: 29370 (boot + 89s/0x0002/info) - Inserted: PD 08(e0xff/s8)
mfi0: 29371 (boot + 89s/0x0002/info) - Inserted: PD 08(e0xff/s8) Info:
enclPd=ffff, scsiType=0, portMap=00,
sasAddr=5000c500138d46b5,0000000000000000
mfi0: 29372 (boot + 89s/0x0002/info) - PD 08(e0xff/s8) FRU is 42D0422
mfi0: 29373 (boot + 89s/0x0002/info) - Inserted: PD 09(e0xff/s9)
mfi0: 29374 (boot + 89s/0x0002/info) - Inserted: PD 09(e0xff/s9) Info:
enclPd=ffff, scsiType=0, portMap=01,
sasAddr=5000c500138d842d,0000000000000000
mfi0: 29375 (boot + 89s/0x0002/info) - PD 09(e0xff/s9) FRU is 42D0422
mfi0: 29376 (boot + 89s/0x0002/info) - Inserted: PD 0a(e0xff/s10)
mfi0: 29377 (boot + 89s/0x0002/info) - Inserted: PD 0a(e0xff/s10)
Info: enclPd=ffff, scsiType=0, portMap=04,
sasAddr=5000c500138d7d75,0000000000000000
mfi0: 29378 (boot + 89s/0x0002/info) - PD 0a(e0xff/s10) FRU is 42D0422
mfi0: 29379 (boot + 89s/0x0002/info) - Inserted: PD 0b(e0xff/s11)
mfi0: 29380 (boot + 89s/0x0002/info) - Inserted: PD 0b(e0xff/s11)
Info: enclPd=ffff, scsiType=0, portMap=05,
sasAddr=5000c500138d7835,0000000000000000
mfi0: 29381 (boot + 89s/0x0002/info) - PD 0b(e0xff/s11) FRU is 42D0422
mfi0: 29382 (boot + 89s/0x0002/info) - Inserted: PD 0c(e0xff/s12)
mfi0: 29383 (boot + 89s/0x0002/info) - Inserted: PD 0c(e0xff/s12)
Info: enclPd=ffff, scsiType=0, portMap=02,
sasAddr=5000c500138d60b5,0000000000000000
mfi0: 29384 (boot + 89s/0x0002/info) - PD 0c(e0xff/s12) FRU is 42D0422
mfi0: 29385 (boot + 89s/0x0002/info) - Inserted: PD 0d(e0xff/s13)
mfi0: 29386 (boot + 89s/0x0002/info) - Inserted: PD 0d(e0xff/s13)
Info: enclPd=ffff, scsiType=0, portMap=03,
sasAddr=5000c500138d7bdd,0000000000000000
mfi0: 29387 (boot + 89s/0x0002/info) - PD 0d(e0xff/s13) FRU is 42D0422
mfi0: 29388 (boot + 89s/0x0002/info) - Inserted: PD 0e(e0xff/s14)
mfi0: 29389 (boot + 89s/0x0002/info) - Inserted: PD 0e(e0xff/s14)
Info: enclPd=ffff, scsiType=0, portMap=06,
sasAddr=5000c500138d6839,0000000000000000
mfi0: 29390 (boot + 89s/0x0002/info) - PD 0e(e0xff/s14) FRU is 42D0422
mfi0: 29391 (boot + 89s/0x0002/info) - Inserted: PD 0f(e0xff/s15)
mfi0: 29392 (boot + 89s/0x0002/info) - Inserted: PD 0f(e0xff/s15)
Info: enclPd=ffff, scsiType=0, portMap=07,
sasAddr=5000c500138d5e8d,0000000000000000
mfi0: 29393 (boot + 89s/0x0002/info) - PD 0f(e0xff/s15) FRU is 42D0422
mfi0: 29394 (boot + 144s/0x0008/info) - Battery temperature is normal
ioapic0: routing intpin 16 (PCI IRQ 16) to vector 52
mfi0: [MPSAFE]
mfi0: [ITHREAD]
pcib8: <PCI-PCI bridge> irq 16 at device 28.4 on pci0
pcib8: domain 0
pcib8: secondary bus 6
pcib8: subordinate bus 10
pcib8: I/O decode 0xf000-0xfff
pcib8: memory decode 0x97000000-0x978fffff
pcib8: prefetched decode 0x96000000-0x96ffffff
pci6: <PCI bus> on pcib8
pci6: domain=0, physical bus=6
found-> vendor=0x101b, dev=0x0452, revid=0x01
domain=0, bus=6, slot=0, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0047, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x0b (2750 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 3 supports D0 D3 current D0
MSI supports 2 messages, 64 bit
pcib0: matched entry for 0.28.INTA
pcib0: slot 28 INTA hardwired to IRQ 16
pcib8: slot 0 INTA is routed to irq 16
pcib9: <PCI-PCI bridge> irq 16 at device 0.0 on pci6
pcib9: domain 0
pcib9: secondary bus 7
pcib9: subordinate bus 7
pcib9: I/O decode 0xf000-0xfff
pcib9: memory decode 0x97000000-0x978fffff
pcib9: prefetched decode 0x96000000-0x96ffffff
pci7: <PCI bus> on pcib9
pci7: domain=0, physical bus=7
found-> vendor=0x102b, dev=0x0530, revid=0x00
domain=0, bus=7, slot=0, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0290, cachelnsz=16 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x10 (4000 ns), maxlat=0x20 (8000 ns)
intpin=a, irq=11
powerspec 1 supports D0 D3 current D0
map[10]: type Prefetchable Memory, range 32, base 0x96000000,
size 24, enabled
pcib9: requested memory range 0x96000000-0x96ffffff: good
pcib8: requested memory range 0x96000000-0x96ffffff: good
map[14]: type Memory, range 32, base 0x97800000, size 14, enabled
pcib9: requested memory range 0x97800000-0x97803fff: good
pcib8: requested memory range 0x97800000-0x97803fff: good
map[18]: type Memory, range 32, base 0x97000000, size 23, enabled
pcib9: requested memory range 0x97000000-0x977fffff: good
pcib8: requested memory range 0x97000000-0x977fffff: good
pcib0: matched entry for 0.28.INTA
pcib0: slot 28 INTA hardwired to IRQ 16
pcib8: slot 0 INTA is routed to irq 16
pcib9: slot 0 INTA is routed to irq 16
vgapci0: <VGA-compatible display> mem
0x96000000-0x96ffffff,0x97800000-0x97803fff,0x97000000-0x977fffff irq
16 at device 0.0 on pci7
uhci2: <UHCI (generic) USB controller> port 0x2060-0x207f irq 17 at
device 29.0 on pci0
uhci2: Reserved 0x20 bytes for rid 0x20 type 4 at 0x2060
uhci2: [GIANT-LOCKED]
uhci2: [ITHREAD]
usb3: <UHCI (generic) USB controller> on uhci2
usb3: USB revision 1.0
uhub3: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb3
uhub3: 2 ports with 2 removable, self powered
uhci3: <UHCI (generic) USB controller> port 0x2040-0x205f irq 18 at
device 29.1 on pci0
uhci3: Reserved 0x20 bytes for rid 0x20 type 4 at 0x2040
uhci3: [GIANT-LOCKED]
uhci3: [ITHREAD]
usb4: <UHCI (generic) USB controller> on uhci3
usb4: USB revision 1.0
uhub4: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb4
uhub4: 2 ports with 2 removable, self powered
uhci4: <UHCI (generic) USB controller> port 0x2020-0x203f irq 19 at
device 29.2 on pci0
uhci4: Reserved 0x20 bytes for rid 0x20 type 4 at 0x2020
uhci4: [GIANT-LOCKED]
uhci4: [ITHREAD]
usb5: <UHCI (generic) USB controller> on uhci4
usb5: USB revision 1.0
uhub5: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb5
uhub5: 2 ports with 2 removable, self powered
ehci1: <EHCI (generic) USB 2.0 controller> mem 0x97a21000-0x97a213ff
irq 17 at device 29.7 on pci0
ehci1: Reserved 0x400 bytes for rid 0x10 type 3 at 0x97a21000
ehci1: [GIANT-LOCKED]
ehci1: [ITHREAD]
usb6: EHCI version 1.0
usb6: companion controllers, 2 ports each: usb3 usb4 usb5
usb6: <EHCI (generic) USB 2.0 controller> on ehci1
usb6: USB revision 2.0
uhub6: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb6
uhub6: 6 ports with 6 removable, self powered
usb6: handing over full speed device on port 2 to usb3
uhub6: port 2, device disappeared after reset
pcib10: <PCI-PCI bridge> at device 30.0 on pci0
pcib10: domain 0
pcib10: secondary bus 41
pcib10: subordinate bus 45
pcib10: I/O decode 0x0-0x0
pcib10: no prefetched decode
pcib10: Subtractively decoded bridge.
pci41: <PCI bus> on pcib10
pci41: domain=0, physical bus=41
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH10 SATA300 controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x20f0-0x20ff,0x20e0-0x20ef irq 16
at device 31.2 on pci0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x20f0
atapci0: Reserved 0x10 bytes for rid 0x24 type 4 at 0x20e0
ata0: <ATA channel 0> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=03 ostat0=00 ostat1=00
ata0: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb
ata0: stat1=0x00 err=0x01 lsb=0x14 msb=0xeb
ata0: reset tp2 stat0=00 stat1=00 devices=0xc<ATAPI_SLAVE,ATAPI_MASTER>
ioapic0: routing intpin 14 (ISA IRQ 14) to vector 53
ata0: [MPSAFE]
ata0: [ITHREAD]
ata1: <ATA channel 1> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=03 ostat0=7f ostat1=7f
ata1: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata1: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata1: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata1: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata1: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata1: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata1: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata1: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata1: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata1: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata1: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata1: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata1: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata1: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata1: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata1: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata1: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata1: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata1: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata1: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata1: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata1: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata1: stat1=0x7f err=0xff lsb=0xff msb=0xff
ata1: reset tp2 stat0=ff stat1=ff devices=0x0
ioapic0: routing intpin 15 (ISA IRQ 15) to vector 54
ata1: [MPSAFE]
ata1: [ITHREAD]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
atapci1: <Intel ICH10 SATA300 controller> port
0x2108-0x210f,0x2124-0x2127,0x2100-0x2107,0x2120-0x2123,0x20d0-0x20df,0x20c0-0x20cf
irq 21 at device 31.5 on pci0
atapci1: Reserved 0x10 bytes for rid 0x20 type 4 at 0x20d0
ioapic0: routing intpin 21 (PCI IRQ 21) to vector 55
atapci1: [MPSAFE]
atapci1: [ITHREAD]
atapci1: Reserved 0x10 bytes for rid 0x24 type 4 at 0x20c0
ata2: <ATA channel 0> on atapci1
atapci1: Reserved 0x8 bytes for rid 0x10 type 4 at 0x2108
atapci1: Reserved 0x4 bytes for rid 0x14 type 4 at 0x2124
ata2: reset tp1 mask=03 ostat0=7f ostat1=7f
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata2: stat1=0x7f err=0xff lsb=0xff msb=0xff
ata2: reset tp2 stat0=ff stat1=ff devices=0x0
ata2: [MPSAFE]
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci1
atapci1: Reserved 0x8 bytes for rid 0x18 type 4 at 0x2100
atapci1: Reserved 0x4 bytes for rid 0x1c type 4 at 0x2120
ata3: reset tp1 mask=03 ostat0=7f ostat1=7f
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat1=0x7f err=0xff lsb=0xff msb=0xff
ata3: reset tp2 stat0=ff stat1=ff devices=0x0
ata3: [MPSAFE]
ata3: [ITHREAD]
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: irq maps: 0 0 0 0
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: irq maps: 0 0 0 0
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A, console
ioapic0: routing intpin 4 (ISA IRQ 4) to vector 56
sio0: [FILTER]
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1: irq maps: 0 0 0 0
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1: irq maps: 0 0 0 0
sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
ioapic0: routing intpin 3 (ISA IRQ 3) to vector 57
sio1: [FILTER]
cpu0: <ACPI CPU> on acpi0
cpu0: switching to generic Cx mode
est0: <Enhanced SpeedStep Frequency Control> on cpu0
est0: Invalid id16 (set, cur) = (16, 17)
est0: Invalid freq 2128, ignored.
est0: Invalid id16 (set, cur) = (15, 17)
est0: Invalid freq 1995, ignored.
est0: Invalid id16 (set, cur) = (14, 17)
est0: Invalid freq 1862, ignored.
est0: Invalid id16 (set, cur) = (13, 17)
est0: Invalid freq 1729, ignored.
est0: Invalid id16 (set, cur) = (12, 17)
est0: Invalid freq 1596, ignored.
p4tcc0: <CPU Frequency Thermal Control> on cpu0
cpu1: <ACPI CPU> on acpi0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
est1: Invalid id16 (set, cur) = (16, 17)
est1: Invalid freq 2128, ignored.
est1: Invalid id16 (set, cur) = (15, 17)
est1: Invalid freq 1995, ignored.
est1: Invalid id16 (set, cur) = (14, 17)
est1: Invalid freq 1862, ignored.
est1: Invalid id16 (set, cur) = (13, 17)
est1: Invalid freq 1729, ignored.
est1: Invalid id16 (set, cur) = (12, 17)
est1: Invalid freq 1596, ignored.
p4tcc1: <CPU Frequency Thermal Control> on cpu1
cpu2: <ACPI CPU> on acpi0
est2: <Enhanced SpeedStep Frequency Control> on cpu2
est2: Invalid id16 (set, cur) = (16, 17)
est2: Invalid freq 2128, ignored.
est2: Invalid id16 (set, cur) = (15, 17)
est2: Invalid freq 1995, ignored.
est2: Invalid id16 (set, cur) = (14, 17)
est2: Invalid freq 1862, ignored.
est2: Invalid id16 (set, cur) = (13, 17)
est2: Invalid freq 1729, ignored.
est2: Invalid id16 (set, cur) = (12, 17)
est2: Invalid freq 1596, ignored.
p4tcc2: <CPU Frequency Thermal Control> on cpu2
cpu3: <ACPI CPU> on acpi0
est3: <Enhanced SpeedStep Frequency Control> on cpu3
est3: Invalid id16 (set, cur) = (16, 17)
est3: Invalid freq 2128, ignored.
est3: Invalid id16 (set, cur) = (15, 17)
est3: Invalid freq 1995, ignored.
est3: Invalid id16 (set, cur) = (14, 17)
est3: Invalid freq 1862, ignored.
est3: Invalid id16 (set, cur) = (13, 17)
est3: Invalid freq 1729, ignored.
est3: Invalid id16 (set, cur) = (12, 17)
est3: Invalid freq 1596, ignored.
p4tcc3: <CPU Frequency Thermal Control> on cpu3
cpu4: <ACPI CPU> on acpi0
est4: <Enhanced SpeedStep Frequency Control> on cpu4
est4: Invalid id16 (set, cur) = (16, 17)
est4: Invalid freq 2128, ignored.
est4: Invalid id16 (set, cur) = (15, 17)
est4: Invalid freq 1995, ignored.
est4: Invalid id16 (set, cur) = (14, 17)
est4: Invalid freq 1862, ignored.
est4: Invalid id16 (set, cur) = (13, 17)
est4: Invalid freq 1729, ignored.
est4: Invalid id16 (set, cur) = (12, 17)
est4: Invalid freq 1596, ignored.
p4tcc4: <CPU Frequency Thermal Control> on cpu4
cpu5: <ACPI CPU> on acpi0
est5: <Enhanced SpeedStep Frequency Control> on cpu5
est5: Invalid id16 (set, cur) = (16, 17)
est5: Invalid freq 2128, ignored.
est5: Invalid id16 (set, cur) = (15, 17)
est5: Invalid freq 1995, ignored.
est5: Invalid id16 (set, cur) = (14, 17)
est5: Invalid freq 1862, ignored.
est5: Invalid id16 (set, cur) = (13, 17)
est5: Invalid freq 1729, ignored.
est5: Invalid id16 (set, cur) = (12, 17)
est5: Invalid freq 1596, ignored.
p4tcc5: <CPU Frequency Thermal Control> on cpu5
cpu6: <ACPI CPU> on acpi0
est6: <Enhanced SpeedStep Frequency Control> on cpu6
est6: Invalid id16 (set, cur) = (16, 17)
est6: Invalid freq 2128, ignored.
est6: Invalid id16 (set, cur) = (15, 17)
est6: Invalid freq 1995, ignored.
est6: Invalid id16 (set, cur) = (14, 17)
est6: Invalid freq 1862, ignored.
est6: Invalid id16 (set, cur) = (13, 17)
est6: Invalid freq 1729, ignored.
est6: Invalid id16 (set, cur) = (12, 17)
est6: Invalid freq 1596, ignored.
p4tcc6: <CPU Frequency Thermal Control> on cpu6
cpu7: <ACPI CPU> on acpi0
est7: <Enhanced SpeedStep Frequency Control> on cpu7
est7: Invalid id16 (set, cur) = (16, 17)
est7: Invalid freq 2128, ignored.
est7: Invalid id16 (set, cur) = (15, 17)
est7: Invalid freq 1995, ignored.
est7: Invalid id16 (set, cur) = (14, 17)
est7: Invalid freq 1862, ignored.
est7: Invalid id16 (set, cur) = (13, 17)
est7: Invalid freq 1729, ignored.
est7: Invalid id16 (set, cur) = (12, 17)
est7: Invalid freq 1596, ignored.
p4tcc7: <CPU Frequency Thermal Control> on cpu7
cpu8: <ACPI CPU> on acpi0
est8: <Enhanced SpeedStep Frequency Control> on cpu8
est8: Invalid id16 (set, cur) = (16, 17)
est8: Invalid freq 2128, ignored.
est8: Invalid id16 (set, cur) = (15, 17)
est8: Invalid freq 1995, ignored.
est8: Invalid id16 (set, cur) = (14, 17)
est8: Invalid freq 1862, ignored.
est8: Invalid id16 (set, cur) = (13, 17)
est8: Invalid freq 1729, ignored.
est8: Invalid id16 (set, cur) = (12, 17)
est8: Invalid freq 1596, ignored.
p4tcc8: <CPU Frequency Thermal Control> on cpu8
cpu9: <ACPI CPU> on acpi0
est9: <Enhanced SpeedStep Frequency Control> on cpu9
est9: Invalid id16 (set, cur) = (16, 17)
est9: Invalid freq 2128, ignored.
est9: Invalid id16 (set, cur) = (15, 17)
est9: Invalid freq 1995, ignored.
est9: Invalid id16 (set, cur) = (14, 17)
est9: Invalid freq 1862, ignored.
est9: Invalid id16 (set, cur) = (13, 17)
est9: Invalid freq 1729, ignored.
est9: Invalid id16 (set, cur) = (12, 17)
est9: Invalid freq 1596, ignored.
p4tcc9: <CPU Frequency Thermal Control> on cpu9
cpu10: <ACPI CPU> on acpi0
est10: <Enhanced SpeedStep Frequency Control> on cpu10
est10: Invalid id16 (set, cur) = (16, 17)
est10: Invalid freq 2128, ignored.
est10: Invalid id16 (set, cur) = (15, 17)
est10: Invalid freq 1995, ignored.
est10: Invalid id16 (set, cur) = (14, 17)
est10: Invalid freq 1862, ignored.
est10: Invalid id16 (set, cur) = (13, 17)
est10: Invalid freq 1729, ignored.
est10: Invalid id16 (set, cur) = (12, 17)
est10: Invalid freq 1596, ignored.
p4tcc10: <CPU Frequency Thermal Control> on cpu10
cpu11: <ACPI CPU> on acpi0
est11: <Enhanced SpeedStep Frequency Control> on cpu11
est11: Invalid id16 (set, cur) = (16, 17)
est11: Invalid freq 2128, ignored.
est11: Invalid id16 (set, cur) = (15, 17)
est11: Invalid freq 1995, ignored.
est11: Invalid id16 (set, cur) = (14, 17)
est11: Invalid freq 1862, ignored.
est11: Invalid id16 (set, cur) = (13, 17)
est11: Invalid freq 1729, ignored.
est11: Invalid id16 (set, cur) = (12, 17)
est11: Invalid freq 1596, ignored.
p4tcc11: <CPU Frequency Thermal Control> on cpu11
cpu12: <ACPI CPU> on acpi0
est12: <Enhanced SpeedStep Frequency Control> on cpu12
est12: Invalid id16 (set, cur) = (16, 17)
est12: Invalid freq 2128, ignored.
est12: Invalid id16 (set, cur) = (15, 17)
est12: Invalid freq 1995, ignored.
est12: Invalid id16 (set, cur) = (14, 17)
est12: Invalid freq 1862, ignored.
est12: Invalid id16 (set, cur) = (13, 17)
est12: Invalid freq 1729, ignored.
est12: Invalid id16 (set, cur) = (12, 17)
est12: Invalid freq 1596, ignored.
p4tcc12: <CPU Frequency Thermal Control> on cpu12
cpu13: <ACPI CPU> on acpi0
est13: <Enhanced SpeedStep Frequency Control> on cpu13
est13: Invalid id16 (set, cur) = (16, 17)
est13: Invalid freq 2128, ignored.
est13: Invalid id16 (set, cur) = (15, 17)
est13: Invalid freq 1995, ignored.
est13: Invalid id16 (set, cur) = (14, 17)
est13: Invalid freq 1862, ignored.
est13: Invalid id16 (set, cur) = (13, 17)
est13: Invalid freq 1729, ignored.
est13: Invalid id16 (set, cur) = (12, 17)
est13: Invalid freq 1596, ignored.
p4tcc13: <CPU Frequency Thermal Control> on cpu13
cpu14: <ACPI CPU> on acpi0
est14: <Enhanced SpeedStep Frequency Control> on cpu14
est14: Invalid id16 (set, cur) = (16, 17)
est14: Invalid freq 2128, ignored.
est14: Invalid id16 (set, cur) = (15, 17)
est14: Invalid freq 1995, ignored.
est14: Invalid id16 (set, cur) = (14, 17)
est14: Invalid freq 1862, ignored.
est14: Invalid id16 (set, cur) = (13, 17)
est14: Invalid freq 1729, ignored.
est14: Invalid id16 (set, cur) = (12, 17)
est14: Invalid freq 1596, ignored.
p4tcc14: <CPU Frequency Thermal Control> on cpu14
cpu15: <ACPI CPU> on acpi0
est15: <Enhanced SpeedStep Frequency Control> on cpu15
est15: Invalid id16 (set, cur) = (16, 17)
est15: Invalid freq 2128, ignored.
est15: Invalid id16 (set, cur) = (15, 17)
est15: Invalid freq 1995, ignored.
est15: Invalid id16 (set, cur) = (14, 17)
est15: Invalid freq 1862, ignored.
est15: Invalid id16 (set, cur) = (13, 17)
est15: Invalid freq 1729, ignored.
est15: Invalid id16 (set, cur) = (12, 17)
est15: Invalid freq 1596, ignored.
p4tcc15: <CPU Frequency Thermal Control> on cpu15
ex_isa_identify()
sio: sio0 already exists; skipping it
sio: sio1 already exists; skipping it
ahc_isa_probe 0: ioport 0xc00 alloc failed
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xca800-0xd8fff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 004d
atkbd: keyboard ID 0xffffffff (1)
kbdc: RESET_KBD return code:ffffffff
kbdc: RESET_KBD return code:ffffffff
kbdc: RESET_KBD return code:ffffffff
kbdc: DIAGNOSE status:0055
kbdc: TEST_KBD_PORT status:0000
atkbd: failed to reset the keyboard.
kbd0 at atkbd0
kbd0: atkbd0, AT 84 (1), config:0x0, flags:0x3d0000
ioapic0: routing intpin 1 (ISA IRQ 1) to vector 58
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: current command byte:004d
kbdc: TEST_AUX_PORT status:0000
kbdc: RESET_AUX return code:ffffffff
kbdc: RESET_AUX return code:ffffffff
kbdc: RESET_AUX return code:ffffffff
kbdc: DIAGNOSE status:0055
kbdc: TEST_KBD_PORT status:0000
psm0: failed to reset the aux device.
fdc0 failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
ppc0: cannot reserve I/O port range
ppc0: <Parallel port> failed to probe at irq 7 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd1, terminal emulator: sc (syscons terminal)
sio2: not probed (disabled)
sio3: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
isa_probe_children: probing PnP devices
cdce0: <IBM RNDIS/CDC ETHER, class 2/0, rev 2.00/2.15, addr 2> on uhub3
cdce0: faking MAC address
cdce0: WARNING: using obsoleted IFF_NEEDSGIANT flag
cdce0: bpf attached
cdce0: Ethernet address: 2a:00:00:00:00:00
Device configuration finished.
Reducing kern.maxvnodes 382450 -> 100000
procfs registered
lapic: Divisor 2, Frequency 66669284 hz
Timecounter "TSC" frequency 2266755720 Hz quality -100
Timecounters tick every 1.000 msec
ipfw2 (+ipv6) initialized, divert loadable, nat loadable, rule-based
forwarding enabled, default to accept, logging limited to 500
packets/entry by default
lo0: bpf attached
hptrr: no controller detected.
bce0: link state changed to DOWN
bce1: link state changed to DOWN
ata0: reiniting channel ..
ata0: reset tp1 mask=03 ostat0=00 ostat1=00
ata0: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb
ata0: stat1=0x00 err=0x01 lsb=0x14 msb=0xeb
ata0: reset tp2 stat0=00 stat1=00 devices=0xc<ATAPI_SLAVE,ATAPI_MASTER>
ata0: reinit done ..
Expensive timeout(9) function: 0xffffffff80267220(0xffffff000414c000)
1.400657904 s
ata0: reiniting channel ..
ata0: reset tp1 mask=03 ostat0=00 ostat1=00
ata0: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb
ata0: stat1=0x00 err=0x01 lsb=0x14 msb=0xeb
ata0: reset tp2 stat0=00 stat1=00 devices=0xc<ATAPI_SLAVE,ATAPI_MASTER>
ata0: reinit done ..
ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA33 cable=40 wire
acd0: <UJDA782 DVD/CDRW/VA13> CDRW drive at ata0 as master
acd0: read 4134KB/s (4134KB/s) write 4134KB/s (4134KB/s), 2048KB buffer, SATA150
acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, DVDRAM, packet
acd0: Writes: CDR, CDRW, test write, burnproof
acd0: Audio: play, 256 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: no/blank disc
mfi0: 29395 (308927984s/0x0020/info) - Time established as 10/15/09
13:19:44; (210 seconds since power on)
ATA PseudoRAID loaded
SMP: AP CPU #1 Launched!
cpu1 AP:
ID: 0x01000000 VER: 0x00060015 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010000
SMP: AP CPU #4 Launched!
cpu4 AP:
ID: 0x04000000 VER: 0x00060015 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010000
SMP: AP CPU #10 Launched!
cpu10 AP:
ID: 0x12000000 VER: 0x00060015 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010000
SMP: AP CPU #13 Launched!
cpu13 AP:
ID: 0x15000000 VER: 0x00060015 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010000
SMP: AP CPU #5 Launched!
cpu5 AP:
ID: 0x05000000 VER: 0x00060015 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010000
SMP: AP CPU #7 Launched!
cpu7 AP:
ID: 0x07000000 VER: 0x00060015 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010000
SMP: AP CPU #15 Launched!
cpu15 AP:
ID: 0x17000000 VER: 0x00060015 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010000
SMP: AP CPU #14 Launched!
cpu14 AP:
ID: 0x16000000 VER: 0x00060015 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010000
SMP: AP CPU #6 Launched!
cpu6 AP:
ID: 0x06000000 VER: 0x00060015 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010000
SMP: AP CPU #2 Launched!
cpu2 AP:
ID: 0x02000000 VER: 0x00060015 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010000
SMP: AP CPU #9 Launched!
cpu9 AP:
ID: 0x11000000 VER: 0x00060015 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010000
SMP: AP CPU #12 Launched!
cpu12 AP:
ID: 0x14000000 VER: 0x00060015 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010000
SMP: AP CPU #3 Launched!
cpu3 AP:
ID: 0x03000000 VER: 0x00060015 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010000
SMP: AP CPU #8 Launched!
cpu8 AP:
ID: 0x10000000 VER: 0x00060015 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010000
SMP: AP CPU #11 Launched!
cpu11 AP:
ID: 0x13000000 VER: 0x00060015 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010000
ioapic0: Assigning ISA IRQ 1 to local APIC 0
ioapic0: Assigning ISA IRQ 3 to local APIC 2
ioapic0: Assigning ISA IRQ 4 to local APIC 4
ioapic0: Assigning ISA IRQ 9 to local APIC 6
ioapic0: Assigning ISA IRQ 14 to local APIC 16
ioapic0: Assigning ISA IRQ 15 to local APIC 18
ioapic0: Assigning PCI IRQ 16 to local APIC 20
ioapic0: Assigning PCI IRQ 17 to local APIC 22
ioapic0: Assigning PCI IRQ 18 to local APIC 0
ioapic0: Assigning PCI IRQ 19 to local APIC 2
ioapic0: Assigning PCI IRQ 21 to local APIC 4
msi: Assigning MSI IRQ 256 to local APIC 6
msi: Assigning MSI IRQ 257 to local APIC 16
WARNING: WITNESS option enabled, expect reduced performance.
WARNING: DIAGNOSTIC option enabled, expect reduced performance.
Trying to mount root from nfs:194.190.130.130:/home/jails/freebsd7.2
panic: invalid ife->ifm_data (0xa) in mii_phy_setmedia
cpuid = 15
KDB: enter: panic
[thread pid 1 tid 100001 ]
Stopped at kdb_enter_why+0x3d: movq $0,0x649838(%rip)
> mfi0: 5428 (boot + 3s/0x0020/info) - Firmware initialization started
> (PCI ID 0060/1000/0364/1014)
> mfi0: 5429 (boot + 3s/0x0020/info) - Firmware version 1.40.62-0691
> mfi0: 5430 (boot + 3s/0x0020/info) - Firmware initialization started
> (PCI ID 0060/1000/0364/1014)
> mfi0: 5431 (boot + 3s/0x0020/info) - Firmware version 1.40.62-0691
> mfi0: 5432 (boot + 64s/0x0008/info) - Battery Present
> mfi0: 5433 (boot + 64s/0x0020/info) - BBU FRU is
> mfi0: 5434 (boot + 64s/0x0020/info) - Board Revision
> mfi0: 5435 (boot + 89s/0x0002/info) - Inserted: PD 08(e0xff/s8)
> mfi0: 5436 (boot + 89s/0x0002/info) - Inserted: PD 08(e0xff/s8) Info:
> enclPd=ffff, scsiType=0, portMap=00,
> sasAddr=5000c500138d46b5,0000000000000000
> mfi0: 5437 (boot + 89s/0x0002/info) - PD 08(e0xff/s8) FRU is 42D0422
> mfi0: 5438 (boot + 89s/0x0002/info) - Inserted: PD 09(e0xff/s9)
> mfi0: 5439 (boot + 89s/0x0002/info) - Inserted: PD 09(e0xff/s9) Info:
> enclPd=ffff, scsiType=0, portMap=01,
> sasAddr=5000c500138d842d,0000000000000000
> mfi0: 5440 (boot + 89s/0x0002/info) - PD 09(e0xff/s9) FRU is 42D0422
> mfi0: 5441 (boot + 89s/0x0002/info) - Inserted: PD 0a(e0xff/s10)
> mfi0: 5442 (boot + 89s/0x0002/info) - Inserted: PD 0a(e0xff/s10) Info:
> enclPd=ffff, scsiType=0, portMap=04,
> sasAddr=5000c500138d7d75,0000000000000000
> mfi0: 5443 (boot + 89s/0x0002/info) - PD 0a(e0xff/s10) FRU is 42D0422
> mfi0: 5444 (boot + 89s/0x0002/info) - Inserted: PD 0b(e0xff/s11)
> mfi0: 5445 (boot + 89s/0x0002/info) - Inserted: PD 0b(e0xff/s11) Info:
> enclPd=ffff, scsiType=0, portMap=05,
> sasAddr=5000c500138d7835,0000000000000000
> mfi0: 5446 (boot + 89s/0x0002/info) - PD 0b(e0xff/s11) FRU is 42D0422
> mfi0: 5447 (boot + 89s/0x0002/info) - Inserted: PD 0c(e0xff/s12)
> mfi0: 5448 (boot + 89s/0x0002/info) - Inserted: PD 0c(e0xff/s12) Info:
> enclPd=ffff, scsiType=0, portMap=02,
> sasAddr=5000c500138d60b5,0000000000000000
> mfi0: 5449 (boot + 89s/0x0002/info) - PD 0c(e0xff/s12) FRU is 42D0422
> mfi0: 5450 (boot + 89s/0x0002/info) - Inserted: PD 0d(e0xff/s13)
> mfi0: 5451 (boot + 89s/0x0002/info) - Inserted: PD 0d(e0xff/s13) Info:
> enclPd=ffff, scsiType=0, portMap=03,
> sasAddr=5000c500138d7bdd,0000000000000000
> mfi0: 5452 (boot + 89s/0x0002/info) - PD 0d(e0xff/s13) FRU is 42D0422
> mfi0: 5453 (boot + 89s/0x0002/info) - Inserted: PD 0e(e0xff/s14)
> mfi0: 5454 (boot + 89s/0x0002/info) - Inserted: PD 0e(e0xff/s14) Info:
> enclPd=ffff, scsiType=0, portMap=06,
> sasAddr=5000c500138d6839,0000000000000000
> mfi0: 5455 (boot + 89s/0x0002/info) - PD 0e(e0xff/s14) FRU is 42D0422
> mfi0: 5456 (boot + 89s/0x0002/info) - Inserted: PD 0f(e0xff/s15)
> mfi0: 5457 (boot + 89s/0x0002/info) - Inserted: PD 0f(e0xff/s15) Info:
> enclPd=ffff, scsiType=0, portMap=07,
> sasAddr=5000c500138d5e8d,0000000000000000
> mfi0: 5458 (boot + 89s/0x0002/info) - PD 0f(e0xff/s15) FRU is 42D0422
> mfi0: 5459 (boot + 144s/0x0008/info) - Battery temperature is normal
> mfi0: 5460 (308390540s/0x0020/info) - Time established as 10/09/09
> 8:02:20; (256 seconds since power on)
> mfi0: 5461 (boot + 3s/0x0020/info) - Firmware initialization started
> (PCI ID 0060/1000/0364/1014)
> mfi0: 5462 (boot + 3s/0x0020/info) - Firmware version 1.40.62-0691
> mfi0: 5463 (boot + 3s/0x0020/info) - Firmware initialization started
> (PCI ID 0060/1000/0364/1014)
> mfi0: 5464 (boot + 3s/0x0020/info) - Firmware version 1.40.62-0691
> mfi0: 5465 (boot + 64s/0x0008/info) - Battery Present
> mfi0: 5466 (boot + 64s/0x0020/info) - BBU FRU is
> mfi0: 5467 (boot + 64s/0x0020/info) - Board Revision
> mfi0: 5468 (boot + 89s/0x0002/info) - Inserted: PD 08(e0xff/s8)
> mfi0: 5469 (boot + 89s/0x0002/info) - Inserted: PD 08(e0xff/s8) Info:
> enclPd=ffff, scsiType=0, portMap=00,
> sasAddr=5000c500138d46b5,0000000000000000
> mfi0: 5470 (boot + 89s/0x0002/info) - PD 08(e0xff/s8) FRU is 42D0422
> mfi0: 5471 (boot + 89s/0x0002/info) - Inserted: PD 09(e0xff/s9)
> mfi0: 5472 (boot + 89s/0x0002/info) - Inserted: PD 09(e0xff/s9) Info:
> enclPd=ffff, scsiType=0, portMap=01,
> sasAddr=5000c500138d842d,0000000000000000
> mfi0: 5473 (boot + 89s/0x0002/info) - PD 09(e0xff/s9) FRU is 42D0422
> mfi0: 5474 (boot + 89s/0x0002/info) - Inserted: PD 0a(e0xff/s10)
> mfi0: 5475 (boot + 89s/0x0002/info) - Inserted: PD 0a(e0xff/s10) Info:
> enclPd=ffff, scsiType=0, portMap=04,
> sasAddr=5000c500138d7d75,0000000000000000
> mfi0: 5476 (boot + 89s/0x0002/info) - PD 0a(e0xff/s10) FRU is 42D0422
> mfi0: 5477 (boot + 89s/0x0002/info) - Inserted: PD 0b(e0xff/s11)
> mfi0: 5478 (boot + 89s/0x0002/info) - Inserted: PD 0b(e0xff/s11) Info:
> enclPd=ffff, scsiType=0, portMap=05,
> sasAddr=5000c500138d7835,0000000000000000
> mfi0: 5479 (boot + 89s/0x0002/info) - PD 0b(e0xff/s11) FRU is 42D0422
> mfi0: 5480 (boot + 89s/0x0002/info) - Inserted: PD 0c(e0xff/s12)
> mfi0: 5481 (boot + 89s/0x0002/info) - Inserted: PD 0c(e0xff/s12) Info:
> enclPd=ffff, scsiType=0, portMap=02,
> sasAddr=5000c500138d60b5,0000000000000000
> mfi0: 5482 (boot + 89s/0x0002/info) - PD 0c(e0xff/s12) FRU is 42D0422
> mfi0: 5483 (boot + 89s/0x0002/info) - Inserted: PD 0d(e0xff/s13)
> mfi0: 5484 (boot + 89s/0x0002/info) - Inserted: PD 0d(e0xff/s13) Info:
> enclPd=ffff, scsiType=0, portMap=03,
> sasAddr=5000c500138d7bdd,0000000000000000
> mfi0: 5485 (boot + 89s/0x0002/info) - PD 0d(e0xff/s13) FRU is 42D0422
> mfi0: 5486 (boot + 89s/0x0002/info) - Inserted: PD 0e(e0xff/s14)
> mfi0: 5487 (boot + 89s/0x0002/info) - Inserted: PD 0e(e0xff/s14) Info:
> enclPd=ffff, scsiType=0, portMap=06,
> sasAddr=5000c500138d6839,0000000000000000
> mfi0: 5488 (boot + 89s/0x0002/info) - PD 0e(e0xff/s14) FRU is 42D0422
> mfi0: 5489 (boot + 89s/0x0002/info) - Inserted: PD 0f(e0xff/s15)
> mfi0: 5490 (boot + 89s/0x0002/info) - Inserted: PD 0f(e0xff/s15) Info:
> enclPd=ffff, scsiType=0, portMap=07,
> sasAddr=5000c500138d5e8d,0000000000000000
> mfi0: 5491 (boot + 89s/0x0002/info) - PD 0f(e0xff/s15) FRU is 42D0422
> mfi0: 5492 (boot + 144s/0x0008/info) - Battery temperature is normal
> mfi0: 5493 (308391152s/0x0020/info) - Time established as 10/09/09
> 8:12:32; (256 seconds since power on)
> mfi0: 5494 (boot + 3s/0x0020/info) - Firmware initialization started
> (PCI ID 0060/1000/0364/1014)
> mfi0: 5495 (boot + 3s/0x0020/info) - Firmware version 1.40.62-0691
> mfi0: 5496 (boot + 3s/0x0020/info) - Firmware initialization started
> (PCI ID 0060/1000/0364/1014)
> mfi0: 5497 (boot + 3s/0x0020/info) - Firmware version 1.40.62-0691
> mfi0: 5498 (boot + 64s/0x0008/info) - Battery Present
> mfi0: 5499 (boot + 64s/0x0020/info) - BBU FRU is
> mfi0: 5500 (boot + 64s/0x0020/info) - Board Revision
> mfi0: 5501 (boot + 89s/0x0002/info) - Inserted: PD 08(e0xff/s8)
> mfi0: 5502 (boot + 89s/0x0002/info) - Inserted: PD 08(e0xff/s8) Info:
> enclPd=ffff, scsiType=0, portMap=00,
> sasAddr=5000c500138d46b5,0000000000000000
> mfi0: 5503 (boot + 89s/0x0002/info) - PD 08(e0xff/s8) FRU is 42D0422
> mfi0: 5504 (boot + 89s/0x0002/info) - Inserted: PD 09(e0xff/s9)
> mfi0: 5505 (boot + 89s/0x0002/info) - Inserted: PD 09(e0xff/s9) Info:
> enclPd=ffff, scsiType=0, portMap=01,
> sasAddr=5000c500138d842d,0000000000000000
> mfi0: 5506 (boot + 89s/0x0002/info) - PD 09(e0xff/s9) FRU is 42D0422
> mfi0: 5507 (boot + 89s/0x0002/info) - Inserted: PD 0a(e0xff/s10)
> mfi0: 5508 (boot + 89s/0x0002/info) - Inserted: PD 0a(e0xff/s10) Info:
> enclPd=ffff, scsiType=0, portMap=04,
> sasAddr=5000c500138d7d75,0000000000000000
> mfi0: 5509 (boot + 89s/0x0002/info) - PD 0a(e0xff/s10) FRU is 42D0422
> mfi0: 5510 (boot + 89s/0x0002/info) - Inserted: PD 0b(e0xff/s11)
> mfi0: 5511 (boot + 89s/0x0002/info) - Inserted: PD 0b(e0xff/s11) Info:
> enclPd=ffff, scsiType=0, portMap=05,
> sasAddr=5000c500138d7835,0000000000000000
> mfi0: 5512 (boot + 89s/0x0002/info) - PD 0b(e0xff/s11) FRU is 42D0422
> mfi0: 5513 (boot + 89s/0x0002/info) - Inserted: PD 0c(e0xff/s12)
> mfi0: 5514 (boot + 89s/0x0002/info) - Inserted: PD 0c(e0xff/s12) Info:
> enclPd=ffff, scsiType=0, portMap=02,
> sasAddr=5000c500138d60b5,0000000000000000
> mfi0: 5515 (boot + 89s/0x0002/info) - PD 0c(e0xff/s12) FRU is 42D0422
> mfi0: 5516 (boot + 89s/0x0002/info) - Inserted: PD 0d(e0xff/s13)
> mfi0: 5517 (boot + 89s/0x0002/info) - Inserted: PD 0d(e0xff/s13) Info:
> enclPd=ffff, scsiType=0, portMap=03,
> sasAddr=5000c500138d7bdd,0000000000000000
> mfi0: 5518 (boot + 89s/0x0002/info) - PD 0d(e0xff/s13) FRU is 42D0422
> mfi0: 5519 (boot + 89s/0x0002/info) - Inserted: PD 0e(e0xff/s14)
> mfi0: 5520 (boot + 89s/0x0002/info) - Inserted: PD 0e(e0xff/s14) Info:
> enclPd=ffff, scsiType=0, portMap=06,
> sasAddr=5000c500138d6839,0000000000000000
> mfi0: 5521 (boot + 89s/0x0002/info) - PD 0e(e0xff/s14) FRU is 42D0422
> mfi0: 5522 (boot + 89s/0x0002/info) - Inserted: PD 0f(e0xff/s15)
> mfi0: 5523 (boot + 89s/0x0002/info) - Inserted: PD 0f(e0xff/s15) Info:
> enclPd=ffff, scsiType=0, portMap=07,
> sasAddr=5000c500138d5e8d,0000000000000000
> mfi0: 5524 (boot + 89s/0x0002/info) - PD 0f(e0xff/s15) FRU is 42D0422
> mfi0: 5525 (boot + 144s/0x0008/info) - Battery temperature is normal
> mfi0: 5526 (308391765s/0x0020/info) - Time established as 10/09/09
> 8:22:45; (257 seconds since power on)
> mfi0: 5527 (boot + 3s/0x0020/info) - Firmware initialization started
> (PCI ID 0060/1000/0364/1014)
> mfi0: 5528 (boot + 3s/0x0020/info) - Firmware version 1.40.62-0691
> mfi0: 5529 (boot + 3s/0x0020/info) - Firmware initialization started
> (PCI ID 0060/1000/0364/1014)
> mfi0: 5530 (boot + 3s/0x0020/info) - Firmware version 1.40.62-0691
> mfi0: 5531 (boot + 64s/0x0008/info) - Battery Present
> mfi0: 5532 (boot + 64s/0x0020/info) - BBU FRU is
> mfi0: 5533 (boot + 64s/0x0020/info) - Board Revision
> mfi0: 5534 (boot + 89s/0x0002/info) - Inserted: PD 08(e0xff/s8)
> mfi0: 5535 (boot + 89s/0x0002/info) - Inserted: PD 08(e0xff/s8) Info:
> enclPd=ffff, scsiType=0, portMap=00,
> sasAddr=5000c500138d46b5,0000000000000000
> mfi0: 5536 (boot + 89s/0x0002/info) - PD 08(e0xff/s8) FRU is 42D0422
> mfi0: 5537 (boot + 89s/0x0002/info) - Inserted: PD 09(e0xff/s9)
> mfi0: 5538 (boot + 89s/0x0002/info) - Inserted: PD 09(e0xff/s9) Info:
> enclPd=ffff, scsiType=0, portMap=01,
> sasAddr=5000c500138d842d,0000000000000000
> mfi0: 5539 (boot + 89s/0x0002/info) - PD 09(e0xff/s9) FRU is 42D0422
> mfi0: 5540 (boot + 89s/0x0002/info) - Inserted: PD 0a(e0xff/s10)
> mfi0: 5541 (boot + 89s/0x0002/info) - Inserted: PD 0a(e0xff/s10) Info:
> enclPd=ffff, scsiType=0, portMap=04,
> sasAddr=5000c500138d7d75,0000000000000000
> mfi0: 5542 (boot + 89s/0x0002/info) - PD 0a(e0xff/s10) FRU is 42D0422
> mfi0: 5543 (boot + 89s/0x0002/info) - Inserted: PD 0b(e0xff/s11)
> mfi0: 5544 (boot + 89s/0x0002/info) - Inserted: PD 0b(e0xff/s11) Info:
> enclPd=ffff, scsiType=0, portMap=05,
> sasAddr=5000c500138d7835,0000000000000000
> mfi0: 5545 (boot + 89s/0x0002/info) - PD 0b(e0xff/s11) FRU is 42D0422
> mfi0: 5546 (boot + 89s/0x0002/info) - Inserted: PD 0c(e0xff/s12)
> mfi0: 5547 (boot + 89s/0x0002/info) - Inserted: PD 0c(e0xff/s12) Info:
> enclPd=ffff, scsiType=0, portMap=02,
> sasAddr=5000c500138d60b5,0000000000000000
> mfi0: 5548 (boot + 89s/0x0002/info) - PD 0c(e0xff/s12) FRU is 42D0422
> mfi0: 5549 (boot + 89s/0x0002/info) - Inserted: PD 0d(e0xff/s13)
> mfi0: 5550 (boot + 89s/0x0002/info) - Inserted: PD 0d(e0xff/s13) Info:
> enclPd=ffff, scsiType=0, portMap=03,
> sasAddr=5000c500138d7bdd,0000000000000000
> mfi0: 5551 (boot + 89s/0x0002/info) - PD 0d(e0xff/s13) FRU is 42D0422
> mfi0: 5552 (boot + 89s/0x0002/info) - Inserted: PD 0e(e0xff/s14)
> mfi0: 5553 (boot + 89s/0x0002/info) - Inserted: PD 0e(e0xff/s14) Info:
> enclPd=ffff, scsiType=0, portMap=06,
> sasAddr=5000c500138d6839,0000000000000000
> mfi0: 5554 (boot + 89s/0x0002/info) - PD 0e(e0xff/s14) FRU is 42D0422
> mfi0: 5555 (boot + 89s/0x0002/info) - Inserted: PD 0f(e0xff/s15)
> mfi0: 5556 (boot + 89s/0x0002/info) - Inserted: PD 0f(e0xff/s15) Info:
> enclPd=ffff, scsiType=0, portMap=07,
> sasAddr=5000c500138d5e8d,0000000000000000
> mfi0: 5557 (boot + 89s/0x0002/info) - PD 0f(e0xff/s15) FRU is 42D0422
> mfi0: 5558 (boot + 144s/0x0008/info) - Battery temperature is normal
> mfi0: 5559 (308392379s/0x0020/info) - Time established as 10/09/09
> 8:32:59; (258 seconds since power on)
> mfi0: 5560 (boot + 3s/0x0020/info) - Firmware initialization started
> (PCI ID 0060/1000/0364/1014)
> mfi0: 5561 (boot + 3s/0x0020/info) - Firmware version 1.40.62-0691
> mfi0: 5562 (boot + 3s/0x0020/info) - Firmware initialization started (PCI ID 006
> 0/1000/0364/1014)
> mfi0: 5563 (boot + 3s/0x0020/info) - Firmware version 1.40.62-0691
> mfi0: 5564 (boot + 64s/0x0008/info) - Battery Present
> mfi0: 5565 (boot + 64s/0x0020/info) - BBU FRU is
> mfi0: 5566 (boot + 64s/0x0020/info) - Board Revision
> mfi0: 5567 (boot + 89s/0x0002/info) - Inserted: PD 08(e0xff/s8)
> mfi0: 5568 (boot + 89s/0x0002/info) - Inserted: PD 08(e0xff/s8) Info:
> enclPd=ffff, scsiType=0, portMap=00,
> sasAddr=5000c500138d46b5,0000000000000000
> mfi0: 5569 (boot + 89s/0x0002/info) - PD 08(e0xff/s8) FRU is 42D0422
> mfi0: 5570 (boot + 89s/0x0002/info) - Inserted: PD 09(e0xff/s9)
> mfi0: 5571 (boot + 89s/0x0002/info) - Inserted: PD 09(e0xff/s9) Info:
> enclPd=ffff, scsiType=0, portMap=01,
> sasAddr=5000c500138d842d,0000000000000000
> mfi0: 5572 (boot + 89s/0x0002/info) - PD 09(e0xff/s9) FRU is 42D0422
> mfi0: 5573 (boot + 89s/0x0002/info) - Inserted: PD 0a(e0xff/s10)
> mfi0: 5574 (boot + 89s/0x0002/info) - Inserted: PD 0a(e0xff/s10) Info:
> enclPd=ffff, scsiType=0, portMap=04,
> sasAddr=5000c500138d7d75,0000000000000000
> mfi0: 5575 (boot + 89s/0x0002/info) - PD 0a(e0xff/s10) FRU is 42D0422
> mfi0: 5576 (boot + 89s/0x0002/info) - Inserted: PD 0b(e0xff/s11)
> mfi0: 5577 (boot + 89s/0x0002/info) - Inserted: PD 0b(e0xff/s11) Info:
> enclPd=ffff, scsiType=0, portMap=05,
> sasAddr=5000c500138d7835,0000000000000000
> mfi0: 5578 (boot + 89s/0x0002/info) - PD 0b(e0xff/s11) FRU is 42D0422
> mfi0: 5579 (boot + 89s/0x0002/info) - Inserted: PD 0c(e0xff/s12)
> mfi0: 5580 (boot + 89s/0x0002/info) - Inserted: PD 0c(e0xff/s12) Info:
> enclPd=ffff, scsiType=0, portMap=02,
> sasAddr=5000c500138d60b5,0000000000000000
> mfi0: 5581 (boot + 89s/0x0002/info) - PD 0c(e0xff/s12) FRU is 42D0422
> mfi0: 5582 (boot + 89s/0x0002/info) - Inserted: PD 0d(e0xff/s13)
> mfi0: 5583 (boot + 89s/0x0002/info) - Inserted: PD 0d(e0xff/s13) Info:
> enclPd=ffff, scsiType=0, portMap=03,
> sasAddr=5000c500138d7bdd,0000000000000000
> mfi0: 5584 (boot + 89s/0x0002/info) - PD 0d(e0xff/s13) FRU is 42D0422
> mfi0: 5585 (boot + 89s/0x0002/info) - Inserted: PD 0e(e0xff/s14)
> mfi0: 5586 (boot + 89s/0x0002/info) - Inserted: PD 0e(e0xff/s14) Info:
> enclPd=ffff, scsiType=0, portMap=06,
> sasAddr=5000c500138d6839,0000000000000000
> mfi0: 5587 (boot + 89s/0x0002/info) - PD 0e(e0xff/s14) FRU is 42D0422
> mfi0: 5588 (boot + 89s/0x0002/info) - Inserted: PD 0f(e0xff/s15)
> mfi0: 5589 (boot + 89s/0x0002/info) - Inserted: PD 0f(e0xff/s15) Info:
> enclPd=ffff, scsiType=0, portMap=07,
> sasAddr=5000c500138d5e8d,0000000000000000
> mfi0: 5590 (boot + 89s/0x0002/info) - PD 0f(e0xff/s15) FRU is 42D0422
> mfi0: 5591 (boot + 144s/0x0008/info) - Battery temperature is normal
> mfi0: 5592 (308392995s/0x0020/info) - Time established as 10/09/09
> 8:43:15; (259 seconds since power on)
> mfi0: 5593 (boot + 3s/0x0020/info) - Firmware initialization started
> (PCI ID 0060/1000/0364/1014)
> mfi0: 5594 (boot + 3s/0x0020/info) - Firmware version 1.40.62-0691
> mfi0: 5595 (boot + 3s/0x0020/info) - Firmware initialization started
> (PCI ID 0060/1000/0364/1014)
> mfi0: 5596 (boot + 3s/0x0020/info) - Firmware version 1.40.62-0691
> mfi0: 5597 (boot + 64s/0x0008/info) - Battery Present
> mfi0: 5598 (boot + 64s/0x0020/info) - BBU FRU is
> mfi0: 5599 (boot + 64s/0x0020/info) - Board Revision
> mfi0: 5600 (boot + 89s/0x0002/info) - Inserted: PD 08(e0xff/s8)
> mfi0: 5601 (boot + 89s/0x0002/info) - Inserted: PD 08(e0xff/s8) Info:
> enclPd=ffff, scsiType=0, portMap=00,
> sasAddr=5000c500138d46b5,0000000000000000
> mfi0: 5602 (boot + 89s/0x0002/info) - PD 08(e0xff/s8) FRU is 42D0422
> mfi0: 5603 (boot + 89s/0x0002/info) - Inserted: PD 09(e0xff/s9)
> mfi0: 5604 (boot + 89s/0x0002/info) - Inserted: PD 09(e0xff/s9) Info:
> enclPd=ffff, scsiType=0, portMap=01,
> sasAddr=5000c500138d842d,0000000000000000
> mfi0: 5605 (boot + 89s/0x0002/info) - PD 09(e0xff/s9) FRU is 42D0422
> mfi0: 5606 (boot + 89s/0x0002/info) - Inserted: PD 0a(e0xff/s10)
> mfi0: 5607 (boot + 89s/0x0002/info) - Inserted: PD 0a(e0xff/s10) Info:
> enclPd=ffff, scsiType=0, portMap=04,
> sasAddr=5000c500138d7d75,0000000000000000
> mfi0: 5608 (boot + 89s/0x0002/info) - PD 0a(e0xff/s10) FRU is 42D0422
> mfi0: 5609 (boot + 89s/0x0002/info) - Inserted: PD 0b(e0xff/s11)
> mfi0: 5610 (boot + 89s/0x0002/info) - Inserted: PD 0b(e0xff/s11) Info:
> enclPd=ffff, scsiType=0, portMap=05,
> sasAddr=5000c500138d7835,0000000000000000
> mfi0: 5611 (boot + 89s/0x0002/info) - PD 0b(e0xff/s11) FRU is 42D0422
> mfi0: 5612 (boot + 89s/0x0002/info) - Inserted: PD 0c(e0xff/s12)
> mfi0: 5613 (boot + 89s/0x0002/info) - Inserted: PD 0c(e0xff/s12) Info:
> enclPd=ffff, scsiType=0, portMap=02,
> sasAddr=5000c500138d60b5,0000000000000000
> mfi0: 5614 (boot + 89s/0x0002/info) - PD 0c(e0xff/s12) FRU is 42D0422
> mfi0: 5615 (boot + 89s/0x0002/info) - Inserted: PD 0d(e0xff/s13)
> mfi0: 5616 (boot + 89s/0x0002/info) - Inserted: PD 0d(e0xff/s13) Info:
> enclPd=ffff, scsiType=0, portMap=03,
> sasAddr=5000c500138d7bdd,0000000000000000
> mfi0: 5617 (boot + 89s/0x0002/info) - PD 0d(e0xff/s13) FRU is 42D0422
> mfi0: 5618 (boot + 89s/0x0002/info) - Inserted: PD 0e(e0xff/s14)
> mfi0: 5619 (boot + 89s/0x0002/info) - Inserted: PD 0e(e0xff/s14) Info:
> enclPd=ffff, scsiType=0, portMap=06,
> sasAddr=5000c500138d6839,0000000000000000
> mfi0: 5620 (boot + 89s/0x0002/info) - PD 0e(e0xff/s14) FRU is 42D0422
> mfi0: 5621 (boot + 89s/0x0002/info) - Inserted: PD 0f(e0xff/s15)
> mfi0: 5622 (boot + 89s/0x0002/info) - Inserted: PD 0f(e0xff/s15) Info:
> enclPd=ffff, scsiType=0, portMap=07,
> sasAddr=5000c500138d5e8d,0000000000000000
> mfi0: 5623 (boot + 89s/0x0002/info) - PD 0f(e0xff/s15) FRU is 42D0422
> mfi0: 5624 (boot + 144s/0x0008/info) - Battery temperature is normal
> mfi0: 5625 (308393612s/0x0020/info) - Time established as 10/09/09
> 8:53:32; (261 seconds since power on)
> mfi0: 5626 (boot + 3s/0x0020/info) - Firmware initialization started
> (PCI ID 0060/1000/0364/1014)
> mfi0: 5627 (boot + 3s/0x0020/info) - Firmware version 1.40.62-0691
> mfi0: 5628 (boot + 3s/0x0020/info) - Firmware initialization started
> (PCI ID 0060/1000/0364/1014)
> mfi0: 5629 (boot + 3s/0x0020/info) - Firmware version 1.40.62-0691
> mfi0: 5630 (boot + 64s/0x0008/info) - Battery Present
> mfi0: 5631 (boot + 64s/0x0020/info) - BBU FRU is
> mfi0: 5632 (boot + 64s/0x0020/info) - Board Revision
> mfi0: 5633 (boot + 89s/0x0002/info) - Inserted: PD 08(e0xff/s8)
> mfi0: 5634 (boot + 89s/0x0002/info) - Inserted: PD 08(e0xff/s8) Info:
> enclPd=ffff, scsiType=0, portMap=00,
> sasAddr=5000c500138d46b5,0000000000000000
> mfi0: 5635 (boot + 89s/0x0002/info) - PD 08(e0xff/s8) FRU is 42D0422
> mfi0: 5636 (boot + 89s/0x0002/info) - Inserted: PD 09(e0xff/s9)
> mfi0: 5637 (boot + 89s/0x0002/info) - Inserted: PD 09(e0xff/s9) Info:
> enclPd=ffff, scsiType=0, portMap=01,
> sasAddr=5000c500138d842d,0000000000000000
> mfi0: 5638 (boot + 89s/0x0002/info) - PD 09(e0xff/s9) FRU is 42D0422
> mfi0: 5639 (boot + 89s/0x0002/info) - Inserted: PD 0a(e0xff/s10)
> mfi0: 5640 (boot + 89s/0x0002/info) - Inserted: PD 0a(e0xff/s10) Info:
> enclPd=ffff, scsiType=0, portMap=04,
> sasAddr=5000c500138d7d75,0000000000000000
> mfi0: 5641 (boot + 89s/0x0002/info) - PD 0a(e0xff/s10) FRU is 42D0422
> mfi0: 5642 (boot + 89s/0x0002/info) - Inserted: PD 0b(e0xff/s11)
> mfi0: 5643 (boot + 89s/0x0002/info) - Inserted: PD 0b(e0xff/s11) Info:
> enclPd=ffff, scsiType=0, portMap=05,
> sasAddr=5000c500138d7835,0000000000000000
> mfi0: 5644 (boot + 89s/0x0002/info) - PD 0b(e0xff/s11) FRU is 42D0422
> mfi0: 5645 (boot + 89s/0x0002/info) - Inserted: PD 0c(e0xff/s12)
> mfi0: 5646 (boot + 89s/0x0002/info) - Inserted: PD 0c(e0xff/s12) Info:
> enclPd=ffff, scsiType=0, portMap=02,
> sasAddr=5000c500138d60b5,0000000000000000
> mfi0: 5647 (boot + 89s/0x0002/info) - PD 0c(e0xff/s12) FRU is 42D0422
> mfi0: 5648 (boot + 89s/0x0002/info) - Inserted: PD 0d(e0xff/s13)
> mfi0: 5649 (boot + 89s/0x0002/info) - Inserted: PD 0d(e0xff/s13) Info:
> enclPd=ffff, scsiType=0, portMap=03,
> sasAddr=5000c500138d7bdd,0000000000000000
> mfi0: 5650 (boot + 89s/0x0002/info) - PD 0d(e0xff/s13) FRU is 42D0422
> mfi0: 5651 (boot + 89s/0x0002/info) - Inserted: PD 0e(e0xff/s14)
> mfi0: 5652 (boot + 89s/0x0002/info) - Inserted: PD 0e(e0xff/s14) Info:
> enclPd=ffff, scsiType=0, portMap=06,
> sasAddr=5000c500138d6839,0000000000000000
> mfi0: 5653 (boot + 89s/0x0002/info) - PD 0e(e0xff/s14) FRU is 42D0422
> mfi0: 5654 (boot + 89s/0x0002/info) - Inserted: PD 0f(e0xff/s15)
> mfi0: 5655 (boot + 89s/0x0002/info) - Inserted: PD 0f(e0xff/s15) Info:
> enclPd=ffff, scsiType=0, portMap=07,
> sasAddr=5000c500138d5e8d,0000000000000000
> mfi0: 5656 (boot + 89s/0x0002/info) - PD 0f(e0xff/s15) FRU is 42D0422
> mfi0: 5657 (boot + 144s/0x0008/info) - Battery temperature is normal
> mfi0: 5658 (308394231s/0x0020/info) - Time established as 10/09/09
> 9:03:51; (262 seconds since power on)
> mfi0: 5659 (boot + 3s/0x0020/info) - Firmware initialization started
> (PCI ID 0060/1000/0364/1014)
> mfi0: 5660 (boot + 3s/0x0020/info) - Firmware version 1.40.62-0691
> mfi0: 5661 (boot + 3s/0x0020/info) - Firmware initialization started
> (PCI ID 0060/1000/0364/1014)
> mfi0: 5662 (boot + 3s/0x0020/info) - Firmware version 1.40.62-0691
> mfi0: 5663 (boot + 64s/0x0008/info) - Battery Present
> mfi0: 5664 (boot + 64s/0x0020/info) - BBU FRU is
> mfi0: 5665 (boot + 64s/0x0020/info) - Board Revision
> mfi0: 5666 (boot + 89s/0x0002/info) - Inserted: PD 08(e0xff/s8)
> mfi0: 5667 (boot + 89s/0x0002/info) - Inserted: PD 08(e0xff/s8) Info:
> enclPd=ffff, scsiType=0, portMap=00,
> sasAddr=5000c500138d46b5,0000000000000000
>
> So on.
>
--
wbr,
pluknet
More information about the freebsd-scsi
mailing list