mpt0: QUEUE FULL EVENT annoying

[Dmitry Sivachenko]

Hello!

I am using FreeBSD-7.2-STABLE. I have the following hardware:

mpt0: <LSILogic SAS/SATA Adapter> port 0xec00-0xecff mem 0xfc4fc000-0xfc4fffff,0xfc4e0000-0xfc4effff irq 16 at device 0.0 on pci1
mpt0: MPI Version=1.5.14.0

da0 at mpt0 bus 0 target 0 lun 0
da0: <SEAGATE ST9146802SS S229> Fixed Direct Access SCSI-5 device
da0: 300.000MB/s transfers
da0: Command Queueing Enabled
da0: 140014MB (286749480 512 byte sectors: 255H 63S/T 17849C)

(many similar disks).

In dmesg output I have a lot of
mpt0: QUEUE FULL EVENT: Bus 0x00 Target 0x00 Depth 58
(with different Target values).

After googleing a bit I got an impression that message is harmless
(see for instance Scott Long's post:
http://kerneltrap.org/mailarchive/freebsd-current/2007/10/11/334975

"The message can probably be put under bootverbose."
)


If it is still the case and these messages are indeed harmless, can we
please put them under bootverbose or do something similar?

They spam system logs and make it much more harder to notice
important events.

Thanks in advance.