Can't connect Sun StorEdge 3310 to FreeBSD 7.1

[Sukharew N Andrew]

Hello.

At time when OS starting seen next lines

run_interrupt_driven_hooks: still waiting after 60 seconds for xpt_config
run_interrupt_driven_hooks: still waiting after 120 seconds for xpt_config
(probe15:ciss0:32:0:0): Begin Domain Validation
(probe17:ciss0:32:2:0): Begin Domain Validation
(probe15:ciss0:32:0:0): inquiry data fails comparison at DV1 step
(probe17:ciss0:32:2:0): inquiry data fails comparison at DV1 step
(probe15:ciss0:32:0:0): Leave Domain Validation
(probe17:ciss0:32:2:0): Leave Domain Validation
run_interrupt_driven_hooks: still waiting after 180 seconds for xpt_config
run_interrupt_driven_hooks: still waiting after 240 seconds for xpt_config
da0 at ciss0 bus 0 target 0 lun 0
da0: <COMPAQ RAID 5  VOLUME OK> Fixed Direct Access SCSI-0 device
da0: 135.168MB/s transfers
da0: 138919MB (284506560 512 byte sectors: 255H 32S/T 34866C)
ses0 at ciss0 bus 32 target 0 lun 0
ses0: <SUN StorEdge 3310 0325> Removable Enclosure Services SCSI-4 device
ses0: 135.168MB/s transfers
ses0: SCSI-3 SES Device
ses1 at ciss0 bus 32 target 2 lun 0
ses1: <SUN StorEdge 3310 0325> Removable Enclosure Services SCSI-4 device
ses1: 135.168MB/s transfers
ses1: SCSI-3 SES Device

When I'm doing "camcontrol rescan all" I see next lines in /var/log/messages:

cam_periph_alloc: attempt to re-allocate valid device pass0 rejected
passasync: Unable to attach new device due to status 0x6: CCB request
was invalid
cam_periph_alloc: attempt to re-allocate valid device da0 rejected
daasync: Unable to attach to new device due to status 0x6

How can I use storedge ?

-- 
------------------
With best regards
Sukharew N Andrew