Current problem reports assigned to freebsd-scsi@FreeBSD.org

[FreeBSD bugmaster]

The following is a listing of current problems submitted by FreeBSD users.
These represent problem reports covering all versions including
experimental development code and obsolete releases.

S Tracker      Resp.      Description
--------------------------------------------------------------------------------
o kern/126866  scsi       [isp] [panic] kernel panic on card initialization
o kern/124667  scsi       [amd] [panic] FreeBSD-7 kernel page faults at amd-scsi
o kern/123674  scsi       [ahc] ahc driver dumping
o kern/123666  scsi       [aac] attach fails with Adaptec SAS RAID 3805 controll
o sparc/121676 scsi       [iscsi] iscontrol do not connect iscsi-target on sparc
o kern/120487  scsi       [sg] scsi_sg incompatible with scanners
o kern/120247  scsi       [mpt] FreeBSD 6.3 and LSI Logic 1030 = only 3.300MB/s 
o kern/119668  scsi       [cam] [patch] certain errors are too verbose comparing
o kern/114597  scsi       [sym] System hangs at SCSI bus reset with dual HBAs
o kern/110847  scsi       [ahd] Tyan U320 onboard problem with more than 3 disks
o kern/99954   scsi       [ahc] reading from DVD failes on 6.x [regression]
o kern/94838   scsi       Kernel panic while mounting SD card with lock switch o
o kern/92798   scsi       [ahc] SCSI problem with timeouts
o kern/90282   scsi       [sym] SCSI bus resets cause loss of ch device
o kern/76178   scsi       [ahd] Problem with ahd and large SCSI Raid system
o kern/74627   scsi       [ahc] [hang] Adaptec 2940U2W Can't boot 5.3
s kern/61165   scsi       [panic] kernel page fault after calling cam_send_ccb
o kern/60641   scsi       [sym] Sporadic SCSI bus resets with 53C810 under load
o kern/60598   scsi       wire down of scsi devices conflicts with config
s kern/57398   scsi       [mly] Current fails to install on mly(4) based RAID di
o kern/52638   scsi       [panic] SCSI U320 on SMP server won't run faster than 
o kern/44587   scsi       dev/dpt/dpt.h is missing defines required for DPT_HAND
o kern/40895   scsi       wierd kernel / device driver bug
o kern/39388   scsi       ncr/sym drivers fail with 53c810 and more than 256MB m
o kern/38828   scsi       [dpt] [request] DPT PM2012B/90 doesn't work
o kern/35234   scsi       World access to /dev/pass? (for scanner) requires acce

26 problems total.


Bugs can be in one of several states:

o - open
A problem report has been submitted, no sanity checking performed.

a - analyzed
The problem is understood and a solution is being sought.

f - feedback
Further work requires additional information from the
     originator or the community - possibly confirmation of
     the effectiveness of a proposed solution.

p - patched
A patch has been committed, but some issues (MFC and / or
     confirmation from originator) are still open.

r - repocopy
The resolution of the problem report is dependent on
     a repocopy operation within the CVS repository which
     is awaiting completion.

s - suspended
The problem is not being worked on, due to lack of information
     or resources.  This is a prime candidate
     for somebody who is looking for a project to do.
     If the problem cannot be solved at all,
     it will be closed, rather than suspended.

c - closed
A problem report is closed when any changes have been integrated,
     documented, and tested -- or when fixing the problem is abandoned.