AW: AW: only 8 LUNs on MPT

[d_elbracht]

the tunable is set:
sysctl -a | grep kern.cam.cam_srch
kern.cam.cam_srch_hi: 1

here is the output from 'camcontrol inq da45':

pass45: <IFT S16S-G1030 361F> Fixed Direct Access SCSI-4 device
pass45: Serial Number 01F53A00000000472CF136000000
300.000MB/s transfers , Command Queueing Enabled 

Dieter


> -----Ursprüngliche Nachricht-----
> Von: owner-freebsd-scsi at freebsd.org 
> [mailto:owner-freebsd-scsi at freebsd.org] Im Auftrag von Scott Long
> Gesendet: Freitag, 7. März 2008 16:34
> An: d_elbracht
> Cc: freebsd-scsi at freebsd.org
> Betreff: Re: AW: only 8 LUNs on MPT
> 
> d_elbracht wrote:
> > adding
> > 
> > kern.cam.cam_srch_hi=1
> > 
> > to /boot/loader.conf did not change anything.
> > still da52 remains the highest device. I would expect da53 
> to show up.
> > 
> > did I miss something ?
> > 
> > Dieter
> > 
> 
> Can you send me the output of 'camcontrol inq da45'.  It 
> might be that this device is reporting itself as SCSI-2 
> instead of SCSI-3.  Also, you can verify that the tunable got 
> set in the loader by checking it with the sysctl command.
> 
> Scott
> 
> _______________________________________________
> freebsd-scsi at freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-scsi
> To unsubscribe, send any mail to 
> "freebsd-scsi-unsubscribe at freebsd.org"