LSI LSLSAS1068 not detected by mpt(4)

[Sean Bruno]

Charles Owens wrote:
> Good day,
>
> We're trying to get FreeBSD 7.0 to fly on an Intel SR2500ALLX server, 
> but the RAID controller isn't being detected properly.  As best I can 
> tell from reading man pages it _should_ be being handled by mpt(4) -- 
> but the system boots with no drives detected.  Also, it is probably 
> worth pointing out that the system has been working before this just 
> fine with Linux.
>
> With pciconf I'm getting this:
>
> mfi0 at pci0:4:14:0:    class=0x010400 card=0x35018086 chip=0x04111000 
> rev=0x00 hdr=0x00
>    class      = mass storage
>    subclass   = RAID
>
>
> I saw a commit message for mpt_pci.c from last Sept (rev 1.51 & mfc) 
> that was a fix for a device ID conflict with mfi(4).  Could this same 
> sort of thing be happening here?
> What is the best way forward?  Is a custom kernel with mfi(4) removed 
> a possible workaround?  Any assistance greatly appreciated!
>
> Thank you,
>
> Charles
>
> ------------------------------------------------------------------------
>
>   
Can you post the boot output(or at least as much as possible)?
> _______________________________________________
> freebsd-scsi at freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-scsi
> To unsubscribe, send any mail to "freebsd-scsi-unsubscribe at freebsd.org"
>   


-- 
Sean Bruno
MiraLink Corporation
6015 NE 80th Ave, Ste 100
Portland, OR 97218
Cell 503-358-6832
Phone 503-621-5143
Fax 503-621-5199
MSN: sbruno at miralink.com
Google:  seanwbruno at gmail.com