sdparm dumping core

[Brad Waite]

Hey guys,

Is there any known reason why sdparm would dump core on my 6.2-STABLE
install?  I'm using an Intel SRCMRU 0-channel RAID in conjunction with an
on-board Adaptec AIC-7902 controller.

Thanks,

Brad Waite

Below are some pertinent DMESGes:

FreeBSD 6.2-STABLE #0: Sun Jul 15 08:40:35 MDT 2007
CPU: Intel(R) XEON(TM) CPU 2.00GHz (1994.13-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0xf24  Stepping = 4
Features=0x3febfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM>
  Logical CPUs per core: 2
real memory  = 1073676288 (1023 MB)
avail memory = 1041489920 (993 MB)
ACPI APIC Table: <INTEL  SWV25   >
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
iir0: <Intel Integrated RAID Controller> mem 0xfa000000-0xfbffffff irq 48
at device 8.0 on pci4
iir0: [GIANT-LOCKED]
ses0 at iir0 bus 1 target 6 lun 0
ses0: <ESG-SHV SCA HSBP M22 0.06> Fixed Processor SCSI-2 device
ses0: SAF-TE Compliant Device
da0 at iir0 bus 2 target 0 lun 0
da0: <Intel Host Drive   #00 > Fixed Direct Access SCSI-2 device
da0: Tagged Queueing Enabled
da0: 139941MB (286599600 512 byte sectors: 255H 63S/T 17840C)
da1 at iir0 bus 2 target 1 lun 0
da1: <Intel Host Drive   #01 > Fixed Direct Access SCSI-2 device
da1: Tagged Queueing Enabled
da1: 69962MB (143283735 512 byte sectors: 255H 63S/T 8919C)