freeBSD 6.3 and LSI Logic 1030 = only 3.300MB/s

[Marko Kobal]

Hi,

I've upgraded one of my boxes from 6.2 to freeBSD 6.3. I have on-board LSI Logic 1030 SCSI Ultra4 Adapter, on it I have attached two IBM Ultra-320 SCSI 36GB disks.

See the dmesg output:

...
mpt0: <LSILogic 1030 Ultra4 Adapter> port 0xb000-0xb0ff mem 0xf5010000-0xf501ffff,0xf5000000-0xf500ffff irq 32 at device 3.0 on pci4
mpt0: [GIANT-LOCKED]
mpt0: MPI Version=1.2.14.0
mpt0: Capabilities: ( RAID-1 SAFTE )
mpt0: 1 Active Volume (1 Max)
mpt0: 2 Hidden Drive Members (6 Max)
...
da1 at mpt0 bus 0 target 4 lun 0
da1: <LSILOGIC 1030          IM 1000> Fixed Direct Access SCSI-2 device 
da1: 3.300MB/s transfers, Tagged Queueing Enabled
da1: 34702MB (71071560 512 byte sectors: 255H 63S/T 4424C)
...

It is showing that logical device da1 has only 3.3MB/s transfer rate!? Before the upgrade it was showing the correct 320MB/s. After a few quick disk test I can confirm that it is running slower than before (but not as slow as 3.3MB/s).

Is there something wrong with the mpt driver in 6.3?

And also, is there any utility to access LSI Logic 1030 BIOS under freeBSD?

Thanks for help!



-- 
Kind regards, Marko Kobal.