isp(4) - kernel panic on initialization of driver

[Ross]

AS> which will enable the debugger.  Then boot with a "-v" and when you
AS> get into a panic you should fall into the kernel debugger.  At the
AS> prompt do a "t" and copy the output (you don't have to copy the
AS> addresses just the stack trace).  I think I can imagine what it looks
AS> like but it would be better if you provided it.

Here you go - a rather large pain in the butt, since HP's ilom doesn't
allow for cut'n'paste from the virtual console (even in serial mode).
Ugh. Hope that it helps some more.

This kernel has been built using the 1 line patch you gave me
(removing the ISP_ENABLE_INTS call).


Cheers,
  Ross.


-=
...[clipped]...
stack pointer                   = 0x20:0xc0af63cc
frame pointer                   = 0x20:0xc0af63cc
code segment                    = base 0x0, limit 0xfffff, type 0x1b
                                = DPL 0, pres 1, def32 1, gran 1
processor eflags                = interrupt enabled, resume, IOPL = 0
current process                 = 0 (swapper)
[thread pid 0 tid 0 ]
Stopped at              xpt_freeze_simq+0x6:    movl    0x58(%ecx),%eax
db> t
Tracing pid 0 tid 0 td 0xc079fd30
xpt_freeze_simq(0,1,c06f7a16,c06f800f,c06f800f,...) at xpt_freeze_simq+0x6
isp_freeze_loopdown(c81d0e00,2,c06f800f,0,c0cf1f6c,...) at isp_freeze_loopdown+0x42
isp_async(c81d0e00,6,0,14e1,2001d5c3,...) at isp_async+0xa72
isp_intr(c81d0e00,8012,1,8014,c0af6718,...) at isp_intr+0xbc7
isp_mbox_wait_complete(c81d0e00,c0af67e8,50000000,0,8,...) at isp_mbox_wait_complete+0x120
isp_mboxcmd(c0af67e8,24,40000000,c827c380,c0af67cc,...) at isp_mboxcmd+0x1ef
isp_reset(c81d0e00,c827c380,e,c0af6880,c02d6ce0,...) at isp_reset+0xe9
isp_pci_attach(c827c380,c827c380,ffffffff,c0708a0a,80000000,...) at isp_pci_attach+0x1899
device_attach(c827c380,c827c380,1,c827c380,c8263980,...) at device_attach+0x36f
device_probe_and_attach(c827c380,c8266800,c0af6944,c08b13a1,c8263980,...) at device_probe_and_attach+0xdd
bus_generic_attach(c8263980,c816c600,1,c08b0e80,c8263980,...) at bus_generic_attach+0x19
...[much more clipped]...
-=

If any number seems 'off', let me know, as it could be my typing
skills.

--