ahd card dump w/more than 2 disks

[AT Matik]

I get a scsi card dump error at boot time when I have more than 2 disks 
attached

I get it on Tyan MBs with Adaptec U320 onboard, in this case the K8SD-Pro and 
K8SR

I am using amd64 stable from today, even if not related a boot with RH-FC6 
does not produce any error.

Seems that the machine runs stable after this. I compiled world 20 times and 
copied some large files between disks with dd.

Any Idea what I can do?

thank's, João


Waiting 10 seconds for SCSI devices to settle
ahd0: Invalid Sequencer interrupt occurred.
>>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
ahd0: Dumping Card State at program address 0x23c Mode 0x0
Card was paused
INTSTAT[0x0] SELOID[0x2] SELID[0x10] HS_MAILBOX[0x0]
INTCTL[0x80] SEQINTSTAT[0x0] SAVED_MODE[0x11] DFFSTAT[0x33]
SCSISIGI[0x0] SCSIPHASE[0x0] SCSIBUS[0x0] LASTPHASE[0x1]
SCSISEQ0[0x0] SCSISEQ1[0x12] SEQCTL0[0x0] SEQINTCTL[0x6]
SEQ_FLAGS[0x0] SEQ_FLAGS2[0x0] QFREEZE_COUNT[0x3]
KERNEL_QFREEZE_COUNT[0x3] MK_MESSAGE_SCB[0xff00] MK_MESSAGE_SCSIID[0xff]
SSTAT0[0x0] SSTAT1[0x0] SSTAT2[0x0] SSTAT3[0x0] PERRDIAG[0x0]
SIMODE1[0xa4] LQISTAT0[0x0] LQISTAT1[0x0] LQISTAT2[0x0]
LQOSTAT0[0x0] LQOSTAT1[0x0] LQOSTAT2[0x0]

SCB Count = 16 CMDS_PENDING = 0 LASTSCB 0xffff CURRSCB 0xd NEXTSCB 0xff00
qinstart = 36 qinfifonext = 37
QINFIFO: 0xf
WAITING_TID_QUEUES:
Pending list:
 15 FIFO_USE[0x0] SCB_CONTROL[0x48] SCB_SCSIID[0x7]
Total 1
Kernel Free SCB list: 14 13 1 2 3 4 5 6 7 8 9 10 11 12 0
Sequencer Complete DMA-inprog list:
Sequencer Complete list:
Sequencer DMA-Up and Complete list:
Sequencer On QFreeze and Complete list:


ahd0: FIFO0 Free, LONGJMP == 0x8000, SCB 0xe
SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89]
SG_CACHE_SHADOW[0x2] SG_STATE[0x0] DFFSXFRCTL[0x0]
SOFFCNT[0x0] MDFFSTAT[0x5] SHADDR = 0x00, SHCNT = 0x0
HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]

ahd0: FIFO1 Free, LONGJMP == 0x8063, SCB 0xd
SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89]
SG_CACHE_SHADOW[0x2] SG_STATE[0x0] DFFSXFRCTL[0x0]
SOFFCNT[0x0] MDFFSTAT[0x5] SHADDR = 0x00, SHCNT = 0x0
HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]
LQIN: 0x8 0x0 0x0 0xe 0x0 0x1 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 
0x0 0x0
ahd0: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = 0x42
ahd0: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x1
ahd0: SAVED_SCSIID = 0x0 SAVED_LUN = 0x0
SIMODE0[0xc]
CCSCBCTL[0x0]
ahd0: REG0 == 0x7ffd, SINDEX = 0x10e, DINDEX = 0x106
ahd0: SCBPTR == 0xe, SCB_NEXT == 0xff00, SCB_NEXT2 == 0xd
CDB 12 20 0 80 8 25
STACK: 0x237 0x2 0x0 0x0 0x0 0x0 0x0 0x0
<<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
SMP: AP CPU #2 Launched!
SMP: AP CPU #3 Launched!
SMP: AP CPU #1 Launched!
Copied 18 bytes of sense data offset 12: 0x70 0x0 0x6 0x0 0x0 0x0 0x0 0xa 0x0 
0x0 0x0 0x0 0x29 0x2 0x0 0x0 0x0 0x0
Copied 18 bytes of sense data offset 12: 0x70 0x0 0x6 0x0 0x0 0x0 0x0 0xa 0x0 
0x0 0x0 0x0 0x29 0x2 0x2 0x0 0x0 0x0
Copied 18 bytes of sense data offset 12: 0x70 0x0 0x6 0x0 0x0 0x0 0x0 0xa 0x0 
0x0 0x0 0x0 0x29 0x2 0x2 0x0 0x0 0x0
da0 at ahd0 bus 0 target 0 lun 0
da0: <MAXTOR ATLAS15K2_36WLS JNZH> Fixed Direct Access SCSI-3 device
da0: 320.000MB/s transfers (160.000MHz, offset 127, 16bit), Tagged Queueing 
Enabled
da0: 35074MB (71833096 512 byte sectors: 255H 63S/T 4471C)
da1 at ahd0 bus 0 target 1 lun 0
da1: <SEAGATE ST373207LW 0005> Fixed Direct Access SCSI-3 device
da1: 320.000MB/s transfers (160.000MHz, offset 63, 16bit), Tagged Queueing 
Enabled
da1: 70007MB (143374744 512 byte sectors: 255H 63S/T 8924C)
da2 at ahd0 bus 0 target 2 lun 0
da2: <SEAGATE ST373207LW 0005> Fixed Direct Access SCSI-3 device
da2: 320.000MB/s transfers (160.000MHz, offset 63, 16bit), Tagged Queueing 
Enabled
da2: 70007MB (143374744 512 byte sectors: 255H 63S/T 8924C)
Trying to mount root from ufs:/dev/da0s1a







A mensagem foi scaneada pelo sistema de e-mail e pode ser considerada segura.
Service fornecido pelo Datacenter Matik  https://datacenter.matik.com.br