kern/103602: drive gets wedged on READ CD CAPACITY if no disc
is in
Josh Carroll
josh.carroll at gmail.com
Wed Mar 14 04:33:07 UTC 2007
Hi Scott/Thomas,
I bought a Pioneer DVR-112D IDE DVD-RW drive to see if the timeouts
were specific to my Sony DRU-800A, but I had no luck with it, either.
In fact, it wouldn't even work with a disc in the drive as the Sony
does. It times out on INQUIRY (dmesg attached below). I'm hoping this
is a valid data point for this issue - it definitely seems to point
towards something that's not drive dependent. Although I was hoping
it'd act the same way as the Sony.
Anyway, below is the dmesg from a boot without a disc in the drive
(the same INQUIRY failures happen with a disc in the drive).
Thanks,
Josh
Copyright (c) 1992-2007 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.0-CURRENT #19: Fri Mar 9 07:57:24 PST 2007
root at pflog.net:/usr/obj/usr/src/sys/DEBLIN
WARNING: WITNESS option enabled, expect reduced performance.
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Core(TM)2 CPU X6900 @ 3.20GHz (3200.01-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x6f6 Stepping = 6
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0xe3bd<SSE3,RSVD2,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,XTPR,<b15>>
AMD Features=0x20100000<NX,LM>
AMD Features2=0x1<LAHF>
Cores per package: 2
real memory = 2147024896 (2047 MB)
avail memory = 2090582016 (1993 MB)
ACPI APIC Table: <MSTEST OEMAPIC >
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
ioapic0 <Version 2.0> irqs 0-23 on motherboard
kbd1 at kbdmux0
ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
acpi0: <KOZIRO FRONTIER> on motherboard
acpi0: [ITHREAD]
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
vgapci0: <VGA-compatible display> mem
0xfd000000-0xfdffffff,0xc0000000-0xcfffffff,0xfc000000-0xfcffffff irq
16 at device 0.0 on pci1
uhci0: <UHCI (generic) USB controller> port 0xe000-0xe01f irq 16 at
device 26.0 on pci0
uhci0: [GIANT-LOCKED]
uhci0: [ITHREAD]
usb0: <UHCI (generic) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 2 ports with 2 removable, self powered
uhci1: <UHCI (generic) USB controller> port 0xe080-0xe09f irq 17 at
device 26.1 on pci0
uhci1: [GIANT-LOCKED]
uhci1: [ITHREAD]
usb1: <UHCI (generic) USB controller> on uhci1
usb1: USB revision 1.0
uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
uhub1: 2 ports with 2 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfebff400-0xfebff7ff
irq 18 at device 26.7 on pci0
ehci0: [GIANT-LOCKED]
ehci0: [ITHREAD]
usb2: EHCI version 1.0
usb2: companion controllers, 2 ports each: usb0 usb1
usb2: <EHCI (generic) USB 2.0 controller> on ehci0
usb2: USB revision 2.0
uhub2: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb2
uhub2: 4 ports with 4 removable, self powered
pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pci3: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0
pci2: <ACPI PCI bus> on pcib3
atapci0: <JMicron JMB363 SATA300 controller> port
0xbc00-0xbc07,0xb880-0xb883,0xb800-0xb807,0xb480-0xb483,0xb400-0xb40f
mem 0xfe8fe000-0xfe8fffff irq 16 at device 0.0 on pci2
atapci0: [ITHREAD]
atapci0: AHCI Version 01.00 controller with 2 ports detected
ata2: <ATA channel 0> on atapci0
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci0
ata3: [ITHREAD]
ata4: <ATA channel 2> on atapci0
ata4: [ITHREAD]
uhci2: <UHCI (generic) USB controller> port 0xd800-0xd81f irq 23 at
device 29.0 on pci0
uhci2: [GIANT-LOCKED]
uhci2: [ITHREAD]
usb3: <UHCI (generic) USB controller> on uhci2
usb3: USB revision 1.0
uhub3: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb3
uhub3: 2 ports with 2 removable, self powered
uhci3: <UHCI (generic) USB controller> port 0xd880-0xd89f irq 19 at
device 29.1 on pci0
uhci3: [GIANT-LOCKED]
uhci3: [ITHREAD]
usb4: <UHCI (generic) USB controller> on uhci3
usb4: USB revision 1.0
uhub4: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb4
uhub4: 2 ports with 2 removable, self powered
uhci4: <UHCI (generic) USB controller> port 0xdc00-0xdc1f irq 18 at
device 29.2 on pci0
uhci4: [GIANT-LOCKED]
uhci4: [ITHREAD]
usb5: <UHCI (generic) USB controller> on uhci4
usb5: USB revision 1.0
uhub5: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb5
uhub5: 2 ports with 2 removable, self powered
ehci1: <EHCI (generic) USB 2.0 controller> mem 0xfebff000-0xfebff3ff
irq 23 at device 29.7 on pci0
ehci1: [GIANT-LOCKED]
ehci1: [ITHREAD]
usb6: EHCI version 1.0
usb6: companion controllers, 2 ports each: usb3 usb4 usb5
usb6: <EHCI (generic) USB 2.0 controller> on ehci1
usb6: USB revision 2.0
uhub6: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb6
uhub6: 6 ports with 6 removable, self powered
pcib4: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci4: <ACPI PCI bus> on pcib4
em0: <Intel(R) PRO/1000 Network Connection Version - 6.2.9> port
0xcc00-0xcc3f mem 0xfeae0000-0xfeafffff,0xfeac0000-0xfeadffff irq 22
at device 1.0 on pci4
em0: Ethernet address: 00:0e:0c:6c:b9:16
em0: [FILTER]
em1: <Intel(R) PRO/1000 Network Connection Version - 6.2.9> port
0xc880-0xc8bf mem 0xfea80000-0xfea9ffff,0xfea60000-0xfea7ffff irq 23
at device 2.0 on pci4
em1: Ethernet address: 00:0e:0c:6c:b9:0a
em1: [FILTER]
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci1: <Intel ICH8 SATA300 controller> port
0xec00-0xec07,0xe880-0xe883,0xe800-0xe807,0xe480-0xe483,0xe400-0xe41f
mem 0xfebff800-0xfebfffff irq 19 at device 31.2 on pci0
atapci1: [ITHREAD]
atapci1: AHCI Version 01.10 controller with 4 ports detected
ata5: <ATA channel 0> on atapci1
ata5: [ITHREAD]
ata6: <ATA channel 1> on atapci1
ata6: [ITHREAD]
ata7: <ATA channel 2> on atapci1
ata7: port not implemented
ata7: [ITHREAD]
ata8: <ATA channel 3> on atapci1
ata8: port not implemented
ata8: [ITHREAD]
ata9: <ATA channel 4> on atapci1
ata9: [ITHREAD]
ata10: <ATA channel 5> on atapci1
ata10: [ITHREAD]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
acpi_button0: <Power Button> on acpi0
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
sio0: [FILTER]
fdc0: <floppy drive controller (FDE)> port 0x3f0-0x3f5,0x3f7 irq 6 drq
2 on acpi0
fdc0: [FILTER]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 2000
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: [ITHREAD]
psm0: model IntelliMouse, device ID 3
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xd2000-0xd2fff,0xd3000-0xd3fff pnpid
ORM0000 on isa0
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/9 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
ppc0: [GIANT-LOCKED]
ppc0: [ITHREAD]
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ugen0: <APC Back-UPS ES 500 FW:801.e5.D USB FW:e5, class 0/0, rev
1.10/1.06, addr 2> on uhub3
Timecounters tick every 1.000 msec
(noperiph:xpt0:0:-1:-1): xpt_compile_path
(noperiph:xpt0:0:-1:-1): xpt_setup_ccb
(noperiph:xpt0:0:-1:-1): xpt_action
(noperiph:xpt0:0:-1:-1): xpt_free_path
(noperiph:xpt0:0:-1:-1): xpt_release_path
(noperiph:xpt0:0:-1:-1): xpt_compile_path
(noperiph:xpt0:0:-1:-1): xpt_setup_ccb
(noperiph:xpt0:0:-1:-1): xpt_action
(noperiph:xpt0:0:-1:-1): xpt_free_path
(noperiph:xpt0:0:-1:-1): xpt_release_path
(noperiph:xpt0:0:-1:-1): xpt_compile_path
(noperiph:xpt0:0:-1:-1): xpt_setup_ccb
(noperiph:xpt0:0:-1:-1): xpt_action
(noperiph:xpt0:0:-1:-1): xpt_free_path
(noperiph:xpt0:0:-1:-1): xpt_release_path
(noperiph:xpt0:0:-1:-1): xpt_compile_path
(noperiph:xpt0:0:-1:-1): xpt_setup_ccb
(noperiph:xpt0:0:-1:-1): xpt_action
(noperiph:xpt0:0:-1:-1): xpt_free_path
(noperiph:xpt0:0:-1:-1): xpt_release_path
(noperiph:xpt0:0:-1:-1): xpt_compile_path
(noperiph:xpt0:0:-1:-1): xpt_setup_ccb
(noperiph:xpt0:0:-1:-1): xpt_action
(noperiph:xpt0:0:-1:-1): xpt_free_path
(noperiph:xpt0:0:-1:-1): xpt_release_path
(noperiph:xpt0:0:-1:-1): xpt_compile_path
(noperiph:xpt0:0:-1:-1): xpt_setup_ccb
(noperiph:xpt0:0:-1:-1): xpt_action
(noperiph:xpt0:0:-1:-1): xpt_free_path
(noperiph:xpt0:0:-1:-1): xpt_release_path
(noperiph:ata0:0:-1:-1): xpt_compile_path
(noperiph:ata0:0:-1:-1): xpt_setup_ccb
(noperiph:ata0:0:-1:-1): xpt_action
(noperiph:ata0:0:-1:-1): xpt_done
(noperiph:ata0:0:-1:-1): xpt_async
(noperiph:ata0:0:-1:-1): xpt_release_path
(noperiph:ata0:0:-1:-1): xpt_compile_path
(noperiph:ata0:0:-1:-1): Registered SIM for ata0
(noperiph:ata0:0:-1:-1): xpt_setup_ccb
(noperiph:ata0:0:-1:-1): xpt_action
(xpt0:ata0:0:-1:-1): xpt_compile_path
(xpt0:ata0:0:-1:-1): Rescanning ATAPI bus.
(xpt0:ata0:0:-1:-1): xpt_setup_ccb
(xpt0:ata0:0:-1:-1): xpt_action
(xpt0:ata0:0:-1:-1): xpt_scan_bus
(xpt0:ata0:0:-1:-1): xpt_setup_ccb
(xpt0:ata0:0:-1:-1): xpt_action
(xpt0:ata0:0:-1:-1): xpt_done
(noperiph:ata0:0:0:0): xpt_compile_path
(noperiph:ata0:0:0:0): xpt_setup_ccb
(noperiph:ata0:0:0:0): xpt_action
(noperiph:ata0:0:0:0): xpt_done
(noperiph:ata0:0:0:0): xpt_setup_ccb
(noperiph:ata0:0:0:0): xpt_action
(noperiph:ata0:0:0:0): xpt_setup_ccb
(noperiph:ata0:0:0:0): xpt_action
(noperiph:ata0:0:0:0): xpt_done
(noperiph:ata0:0:0:0): xpt_setup_ccb
(noperiph:ata0:0:0:0): xpt_action
(noperiph:ata0:0:0:0): GET_TRAN_SETTINGS
(noperiph:ata0:0:0:0): xpt_done
(noperiph:ata0:0:0:0): SET_TRAN_SETTINGS not supported
(noperiph:ata0:0:0:0): xpt_done
(noperiph:ata0:0:0:0): xpt_release_path
(xpt0:ata0:0:0:0): xpt_compile_path
(xpt0:ata0:0:0:0): xpt_setup_ccb
(xpt0:ata0:0:0:0): xpt_action
(xpt0:ata0:0:0:0): xpt_scan_lun
(xpt0:ata0:0:0:0): xpt_setup_ccb
(xpt0:ata0:0:0:0): xpt_action
(xpt0:ata0:0:0:0): xpt_done
(xpt0:ata0:0:0:0): xpt_done
(noperiph:ata0:0:1:0): xpt_compile_path
(noperiph:ata0:0:1:0): xpt_setup_ccb
(noperiph:ata0:0:1:0): xpt_action
(noperiph:ata0:0:1:0): xpt_done
(noperiph:ata0:0:1:0): xpt_setup_ccb
(noperiph:ata0:0:1:0): xpt_action
(noperiph:ata0:0:1:0): xpt_setup_ccb
(noperiph:ata0:0:1:0): xpt_action
(noperiph:ata0:0:1:0): xpt_done
(noperiph:ata0:0:1:0): xpt_setup_ccb
(noperiph:ata0:0:1:0): xpt_action
(noperiph:ata0:0:1:0): GET_TRAN_SETTINGS
(noperiph:ata0:0:1:0): xpt_done
(noperiph:ata0:0:1:0): SET_TRAN_SETTINGS not supported
(noperiph:ata0:0:1:0): xpt_done
(noperiph:ata0:0:1:0): xpt_release_path
(xpt0:ata0:0:1:0): xpt_compile_path
(xpt0:ata0:0:1:0): xpt_setup_ccb
(xpt0:ata0:0:1:0): xpt_action
(xpt0:ata0:0:1:0): xpt_scan_lun
(xpt0:ata0:0:1:0): xpt_setup_ccb
(xpt0:ata0:0:1:0): xpt_action
(xpt0:ata0:0:1:0): xpt_done
(xpt0:ata0:0:1:0): xpt_done
(noperiph:ata1:0:-1:-1): xpt_compile_path
(noperiph:ata1:0:-1:-1): xpt_setup_ccb
(noperiph:ata1:0:-1:-1): xpt_action
(noperiph:ata1:0:-1:-1): xpt_done
(noperiph:ata1:0:-1:-1): xpt_async
(noperiph:ata1:0:-1:-1): xpt_release_path
(noperiph:ata1:0:-1:-1): xpt_compile_path
(noperiph:ata1:0:-1:-1): Registered SIM for ata1
(noperiph:ata1:0:-1:-1): xpt_setup_ccb
(noperiph:ata1:0:-1:-1): xpt_action
(xpt0:ata1:0:-1:-1): xpt_compile_path
(xpt0:ata1:0:-1:-1): Rescanning ATAPI bus.
(xpt0:ata1:0:-1:-1): xpt_setup_ccb
(xpt0:ata1:0:-1:-1): xpt_action
(xpt0:ata1:0:-1:-1): xpt_scan_bus
(xpt0:ata1:0:-1:-1): xpt_setup_ccb
(xpt0:ata1:0:-1:-1): xpt_action
(xpt0:ata1:0:-1:-1): xpt_done
(noperiph:ata1:0:0:0): xpt_compile_path
(noperiph:ata1:0:0:0): xpt_setup_ccb
(noperiph:ata1:0:0:0): xpt_action
(noperiph:ata1:0:0:0): xpt_done
(noperiph:ata1:0:0:0): xpt_setup_ccb
(noperiph:ata1:0:0:0): xpt_action
(noperiph:ata1:0:0:0): xpt_setup_ccb
(noperiph:ata1:0:0:0): xpt_action
(noperiph:ata1:0:0:0): xpt_done
(noperiph:ata1:0:0:0): xpt_setup_ccb
(noperiph:ata1:0:0:0): xpt_action
(noperiph:ata1:0:0:0): GET_TRAN_SETTINGS
(noperiph:ata1:0:0:0): xpt_done
(noperiph:ata1:0:0:0): SET_TRAN_SETTINGS not supported
(noperiph:ata1:0:0:0): xpt_done
(noperiph:ata1:0:0:0): xpt_release_path
(xpt0:ata1:0:0:0): xpt_compile_path
(xpt0:ata1:0:0:0): xpt_setup_ccb
(xpt0:ata1:0:0:0): xpt_action
(xpt0:ata1:0:0:0): xpt_scan_lun
(xpt0:ata1:0:0:0): xpt_setup_ccb
(xpt0:ata1:0:0:0): xpt_action
(xpt0:ata1:0:0:0): xpt_done
(xpt0:ata1:0:0:0): xpt_done
(noperiph:ata1:0:1:0): xpt_compile_path
(noperiph:ata1:0:1:0): xpt_setup_ccb
(noperiph:ata1:0:1:0): xpt_action
(noperiph:ata1:0:1:0): xpt_done
(noperiph:ata1:0:1:0): xpt_setup_ccb
(noperiph:ata1:0:1:0): xpt_action
(noperiph:ata1:0:1:0): xpt_setup_ccb
(noperiph:ata1:0:1:0): xpt_action
(noperiph:ata1:0:1:0): xpt_done
(noperiph:ata1:0:1:0): xpt_setup_ccb
(noperiph:ata1:0:1:0): xpt_action
(noperiph:ata1:0:1:0): GET_TRAN_SETTINGS
(noperiph:ata1:0:1:0): xpt_done
(noperiph:ata1:0:1:0): SET_TRAN_SETTINGS not supported
(noperiph:ata1:0:1:0): xpt_done
(noperiph:ata1:0:1:0): xpt_release_path
(xpt0:ata1:0:1:0): xpt_compile_path
(xpt0:ata1:0:1:0): xpt_setup_ccb
(xpt0:ata1:0:1:0): xpt_action
(xpt0:ata1:0:1:0): xpt_scan_lun
(xpt0:ata1:0:1:0): xpt_setup_ccb
(xpt0:ata1:0:1:0): xpt_action
(xpt0:ata1:0:1:0): xpt_done
(xpt0:ata1:0:1:0): xpt_done
(xpt0:ata0:0:0:0): camisr
(xpt0:ata0:0:0:0): xpt_scan_bus
(xpt0:ata0:0:0:0): xpt_setup_ccb
(xpt0:ata0:0:0:0): xpt_action
(xpt0:ata0:0:0:0): xpt_free_path
(xpt0:ata0:0:0:0): xpt_release_path
(xpt0:ata0:0:1:0): camisr
(xpt0:ata0:0:1:0): xpt_scan_bus
(xpt0:ata0:0:1:0): xpt_setup_ccb
(xpt0:ata0:0:1:0): xpt_action
(xpt0:ata0:0:1:0): xpt_free_path
(xpt0:ata0:0:1:0): xpt_release_path
(xpt0:ata0:0:-1:-1): xpt_done
(xpt0:ata1:0:0:0): camisr
(xpt0:ata1:0:0:0): xpt_scan_bus
(xpt0:ata1:0:0:0): xpt_setup_ccb
(xpt0:ata1:0:0:0): xpt_action
(xpt0:ata1:0:0:0): xpt_free_path
(xpt0:ata1:0:0:0): xpt_release_path
(xpt0:ata1:0:1:0): camisr
(xpt0:ata1:0:1:0): xpt_scan_bus
(xpt0:ata1:0:1:0): xpt_setup_ccb
(xpt0:ata1:0:1:0): xpt_action
(xpt0:ata1:0:1:0): xpt_free_path
(xpt0:ata1:0:1:0): xpt_release_path
(xpt0:ata1:0:-1:-1): xpt_done
(xpt0:ata0:0:-1:-1): camisr
(xpt0:ata0:0:-1:-1): Rescan succeeded
(xpt0:ata0:0:-1:-1): xpt_free_path
(xpt0:ata0:0:-1:-1): xpt_release_path
(xpt0:ata1:0:-1:-1): camisr
(xpt0:ata1:0:-1:-1): Rescan succeeded
(xpt0:ata1:0:-1:-1): xpt_free_path
(xpt0:ata1:0:-1:-1): xpt_release_path
ad8: 152627MB <WDC WD1600JB-00EVA0 15.05R15> at ata4-master UDMA100
acd0: DVDR <PIONEER DVD-RW DVR-112D/1.06> at ata4-slave UDMA66
(noperiph:ata2:0:-1:-1): xpt_compile_path
(noperiph:ata2:0:-1:-1): xpt_setup_ccb
(noperiph:ata2:0:-1:-1): xpt_action
(noperiph:ata2:0:-1:-1): xpt_done
(noperiph:ata2:0:-1:-1): xpt_async
(noperiph:ata2:0:-1:-1): xpt_release_path
(noperiph:ata2:0:-1:-1): xpt_compile_path
(noperiph:ata2:0:-1:-1): Registered SIM for ata2
(noperiph:ata2:0:-1:-1): xpt_setup_ccb
(noperiph:ata2:0:-1:-1): xpt_action
(xpt0:ata2:0:-1:-1): xpt_compile_path
(xpt0:ata2:0:-1:-1): Rescanning ATAPI bus.
(xpt0:ata2:0:-1:-1): xpt_setup_ccb
(xpt0:ata2:0:-1:-1): xpt_action
(xpt0:ata2:0:-1:-1): xpt_scan_bus
(xpt0:ata2:0:-1:-1): xpt_setup_ccb
(xpt0:ata2:0:-1:-1): xpt_action
(xpt0:ata2:0:-1:-1): xpt_done
(noperiph:ata2:0:0:0): xpt_compile_path
(noperiph:ata2:0:0:0): xpt_setup_ccb
(noperiph:ata2:0:0:0): xpt_action
(noperiph:ata2:0:0:0): xpt_done
(noperiph:ata2:0:0:0): xpt_setup_ccb
(noperiph:ata2:0:0:0): xpt_action
(noperiph:ata2:0:0:0): xpt_setup_ccb
(noperiph:ata2:0:0:0): xpt_action
(noperiph:ata2:0:0:0): xpt_done
(noperiph:ata2:0:0:0): xpt_setup_ccb
(noperiph:ata2:0:0:0): xpt_action
(noperiph:ata2:0:0:0): GET_TRAN_SETTINGS
(noperiph:ata2:0:0:0): xpt_done
(noperiph:ata2:0:0:0): SET_TRAN_SETTINGS not supported
(noperiph:ata2:0:0:0): xpt_done
(noperiph:ata2:0:0:0): xpt_release_path
(xpt0:ata2:0:0:0): xpt_compile_path
(xpt0:ata2:0:0:0): xpt_setup_ccb
(xpt0:ata2:0:0:0): xpt_action
(xpt0:ata2:0:0:0): xpt_scan_lun
(xpt0:ata2:0:0:0): xpt_setup_ccb
(xpt0:ata2:0:0:0): xpt_action
(xpt0:ata2:0:0:0): xpt_done
(xpt0:ata2:0:0:0): xpt_done
(noperiph:ata2:0:1:0): xpt_compile_path
(noperiph:ata2:0:1:0): xpt_setup_ccb
(noperiph:ata2:0:1:0): xpt_action
(noperiph:ata2:0:1:0): xpt_done
(noperiph:ata2:0:1:0): xpt_setup_ccb
(noperiph:ata2:0:1:0): xpt_action
(noperiph:ata2:0:1:0): xpt_setup_ccb
(noperiph:ata2:0:1:0): xpt_action
(noperiph:ata2:0:1:0): xpt_done
(noperiph:ata2:0:1:0): xpt_setup_ccb
(noperiph:ata2:0:1:0): xpt_action
(noperiph:ata2:0:1:0): GET_TRAN_SETTINGS
(noperiph:ata2:0:1:0): xpt_done
(noperiph:ata2:0:1:0): SET_TRAN_SETTINGS not supported
(noperiph:ata2:0:1:0): xpt_done
(noperiph:ata2:0:1:0): xpt_release_path
(xpt0:ata2:0:1:0): xpt_compile_path
(xpt0:ata2:0:1:0): xpt_setup_ccb
(xpt0:ata2:0:1:0): xpt_action
(xpt0:ata2:0:1:0): xpt_scan_lun
(xpt0:ata2:0:1:0): xpt_setup_ccb
(xpt0:ata2:0:1:0): xpt_action
(xpt0:ata2:0:1:0): xpt_done
(probe0:ata2:0:1:0): xpt_compile_path
(probe0:ata2:0:1:0): xpt_setup_ccb
(probe0:ata2:0:1:0): xpt_action
(probe0:ata2:0:1:0): xpt_setup_ccb
(probe0:ata2:0:1:0): xpt_action
(probe0:ata2:0:1:0): xpt_setup_ccb
(probe0:ata2:0:1:0): xpt_action
(probe0:ata2:0:1:0): xpt_done
(probe0:ata2:0:1:0): xpt_schedule
(probe0:ata2:0:1:0): added periph to queue
cam_debug: xpt_schedule_dev
cam_debug: Inserting onto queue
(probe0:ata2:0:1:0): calling xpt_run_devq
cam_debug: xpt_run_dev_allocq
cam_debug: qfrozen_cnt == 0x0, entries == 1, openings == 16, active == 0
cam_debug: running device 0xc53b6c00
(probe0:ata2:0:1:0): xpt_setup_ccb
cam_debug: calling periph start
(probe0:ata2:0:1:0): probestart
(probe0:ata2:0:1:0): xpt_action
(probe0:ata2:0:1:0): INQUIRY. CDB: 12 0 0 0 24 0
(xpt0:ata2:0:0:0): camisr
(xpt0:ata2:0:0:0): xpt_scan_bus
(xpt0:ata2:0:0:0): xpt_setup_ccb
(xpt0:ata2:0:0:0): xpt_action
(xpt0:ata2:0:0:0): xpt_free_path
(xpt0:ata2:0:0:0): xpt_release_path
ad10: 381553MB <Seagate ST3400633AS 3.AAH> at ata5-master SATA150
(noperiph:ata3:0:-1:-1): xpt_compile_path
(noperiph:ata3:0:-1:-1): xpt_setup_ccb
(noperiph:ata3:0:-1:-1): xpt_action
(noperiph:ata3:0:-1:-1): xpt_done
(noperiph:ata3:0:-1:-1): xpt_async
(noperiph:ata3:0:-1:-1): xpt_release_path
(noperiph:ata3:0:-1:-1): xpt_compile_path
(noperiph:ata3:0:-1:-1): Registered SIM for ata3
(noperiph:ata3:0:-1:-1): xpt_setup_ccb
(noperiph:ata3:0:-1:-1): xpt_action
(xpt0:ata3:0:-1:-1): xpt_compile_path
(xpt0:ata3:0:-1:-1): Rescanning ATAPI bus.
(xpt0:ata3:0:-1:-1): xpt_setup_ccb
(xpt0:ata3:0:-1:-1): xpt_action
(xpt0:ata3:0:-1:-1): xpt_scan_bus
(xpt0:ata3:0:-1:-1): xpt_setup_ccb
(xpt0:ata3:0:-1:-1): xpt_action
(xpt0:ata3:0:-1:-1): xpt_done
(noperiph:ata3:0:0:0): xpt_compile_path
(noperiph:ata3:0:0:0): xpt_setup_ccb
(noperiph:ata3:0:0:0): xpt_action
(noperiph:ata3:0:0:0): xpt_done
(noperiph:ata3:0:0:0): xpt_setup_ccb
(noperiph:ata3:0:0:0): xpt_action
(noperiph:ata3:0:0:0): xpt_setup_ccb
(noperiph:ata3:0:0:0): xpt_action
(noperiph:ata3:0:0:0): xpt_done
(noperiph:ata3:0:0:0): xpt_setup_ccb
(noperiph:ata3:0:0:0): xpt_action
(noperiph:ata3:0:0:0): GET_TRAN_SETTINGS
(noperiph:ata3:0:0:0): xpt_done
(noperiph:ata3:0:0:0): SET_TRAN_SETTINGS not supported
(noperiph:ata3:0:0:0): xpt_done
(noperiph:ata3:0:0:0): xpt_release_path
(xpt0:ata3:0:0:0): xpt_compile_path
(xpt0:ata3:0:0:0): xpt_setup_ccb
(xpt0:ata3:0:0:0): xpt_action
(xpt0:ata3:0:0:0): xpt_scan_lun
(xpt0:ata3:0:0:0): xpt_setup_ccb
(xpt0:ata3:0:0:0): xpt_action
(xpt0:ata3:0:0:0): xpt_done
(xpt0:ata3:0:0:0): xpt_done
(noperiph:ata3:0:1:0): xpt_compile_path
(noperiph:ata3:0:1:0): xpt_setup_ccb
(noperiph:ata3:0:1:0): xpt_action
(noperiph:ata3:0:1:0): xpt_done
(noperiph:ata3:0:1:0): xpt_setup_ccb
(noperiph:ata3:0:1:0): xpt_action
(noperiph:ata3:0:1:0): xpt_setup_ccb
(noperiph:ata3:0:1:0): xpt_action
(noperiph:ata3:0:1:0): xpt_done
(noperiph:ata3:0:1:0): xpt_setup_ccb
(noperiph:ata3:0:1:0): xpt_action
(noperiph:ata3:0:1:0): GET_TRAN_SETTINGS
(noperiph:ata3:0:1:0): xpt_done
(noperiph:ata3:0:1:0): SET_TRAN_SETTINGS not supported
(noperiph:ata3:0:1:0): xpt_done
(noperiph:ata3:0:1:0): xpt_release_path
(xpt0:ata3:0:1:0): xpt_compile_path
(xpt0:ata3:0:1:0): xpt_setup_ccb
(xpt0:ata3:0:1:0): xpt_action
(xpt0:ata3:0:1:0): xpt_scan_lun
(xpt0:ata3:0:1:0): xpt_setup_ccb
(xpt0:ata3:0:1:0): xpt_action
(xpt0:ata3:0:1:0): xpt_done
(xpt0:ata3:0:1:0): xpt_done
(xpt0:ata3:0:0:0): camisr
(xpt0:ata3:0:0:0): xpt_scan_bus
(xpt0:ata3:0:0:0): xpt_setup_ccb
(xpt0:ata3:0:0:0): xpt_action
(xpt0:ata3:0:0:0): xpt_free_path
(xpt0:ata3:0:0:0): xpt_release_path
(xpt0:ata3:0:1:0): camisr
(xpt0:ata3:0:1:0): xpt_scan_bus
(xpt0:ata3:0:1:0): xpt_setup_ccb
(xpt0:ata3:0:1:0): xpt_action
(xpt0:ata3:0:1:0): xpt_free_path
(xpt0:ata3:0:1:0): xpt_release_path
(xpt0:ata3:0:-1:-1): xpt_done
(xpt0:ata3:0:-1:-1): camisr
(xpt0:ata3:0:-1:-1): Rescan succeeded
(xpt0:ata3:0:-1:-1): xpt_free_path
(xpt0:ata3:0:-1:-1): xpt_release_path
ad12: 114440MB <Seagate ST3120026AS 8.05> at ata6-master SATA150
(noperiph:ata4:0:-1:-1): xpt_compile_path
(noperiph:ata4:0:-1:-1): xpt_setup_ccb
(noperiph:ata4:0:-1:-1): xpt_action
(noperiph:ata4:0:-1:-1): xpt_done
(noperiph:ata4:0:-1:-1): xpt_async
(noperiph:ata4:0:-1:-1): xpt_release_path
(noperiph:ata4:0:-1:-1): xpt_compile_path
(noperiph:ata4:0:-1:-1): Registered SIM for ata4
(noperiph:ata4:0:-1:-1): xpt_setup_ccb
(noperiph:ata4:0:-1:-1): xpt_action
(xpt0:ata4:0:-1:-1): xpt_compile_path
(xpt0:ata4:0:-1:-1): Rescanning ATAPI bus.
(xpt0:ata4:0:-1:-1): xpt_setup_ccb
(xpt0:ata4:0:-1:-1): xpt_action
(xpt0:ata4:0:-1:-1): xpt_scan_bus
(xpt0:ata4:0:-1:-1): xpt_setup_ccb
(xpt0:ata4:0:-1:-1): xpt_action
(xpt0:ata4:0:-1:-1): xpt_done
(noperiph:ata4:0:0:0): xpt_compile_path
(noperiph:ata4:0:0:0): xpt_setup_ccb
(noperiph:ata4:0:0:0): xpt_action
(noperiph:ata4:0:0:0): xpt_done
(noperiph:ata4:0:0:0): xpt_setup_ccb
(noperiph:ata4:0:0:0): xpt_action
(noperiph:ata4:0:0:0): xpt_setup_ccb
(noperiph:ata4:0:0:0): xpt_action
(noperiph:ata4:0:0:0): xpt_done
(noperiph:ata4:0:0:0): xpt_setup_ccb
(noperiph:ata4:0:0:0): xpt_action
(noperiph:ata4:0:0:0): GET_TRAN_SETTINGS
(noperiph:ata4:0:0:0): xpt_done
(noperiph:ata4:0:0:0): SET_TRAN_SETTINGS not supported
(noperiph:ata4:0:0:0): xpt_done
(noperiph:ata4:0:0:0): xpt_release_path
(xpt0:ata4:0:0:0): xpt_compile_path
(xpt0:ata4:0:0:0): xpt_setup_ccb
(xpt0:ata4:0:0:0): xpt_action
(xpt0:ata4:0:0:0): xpt_scan_lun
(xpt0:ata4:0:0:0): xpt_setup_ccb
(xpt0:ata4:0:0:0): xpt_action
(xpt0:ata4:0:0:0): xpt_done
(xpt0:ata4:0:0:0): xpt_done
(noperiph:ata4:0:1:0): xpt_compile_path
(noperiph:ata4:0:1:0): xpt_setup_ccb
(noperiph:ata4:0:1:0): xpt_action
(noperiph:ata4:0:1:0): xpt_done
(noperiph:ata4:0:1:0): xpt_setup_ccb
(noperiph:ata4:0:1:0): xpt_action
(noperiph:ata4:0:1:0): xpt_setup_ccb
(noperiph:ata4:0:1:0): xpt_action
(noperiph:ata4:0:1:0): xpt_done
(noperiph:ata4:0:1:0): xpt_setup_ccb
(noperiph:ata4:0:1:0): xpt_action
(noperiph:ata4:0:1:0): GET_TRAN_SETTINGS
(noperiph:ata4:0:1:0): xpt_done
(noperiph:ata4:0:1:0): SET_TRAN_SETTINGS not supported
(noperiph:ata4:0:1:0): xpt_done
(noperiph:ata4:0:1:0): xpt_release_path
(xpt0:ata4:0:1:0): xpt_compile_path
(xpt0:ata4:0:1:0): xpt_setup_ccb
(xpt0:ata4:0:1:0): xpt_action
(xpt0:ata4:0:1:0): xpt_scan_lun
(xpt0:ata4:0:1:0): xpt_setup_ccb
(xpt0:ata4:0:1:0): xpt_action
(xpt0:ata4:0:1:0): xpt_done
(xpt0:ata4:0:1:0): xpt_done
(noperiph:ata5:0:-1:-1): xpt_compile_path
(noperiph:ata5:0:-1:-1): xpt_setup_ccb
(noperiph:ata5:0:-1:-1): xpt_action
(noperiph:ata5:0:-1:-1): xpt_done
(noperiph:ata5:0:-1:-1): xpt_async
(noperiph:ata5:0:-1:-1): xpt_release_path
(noperiph:ata5:0:-1:-1): xpt_compile_path
(noperiph:ata5:0:-1:-1): Registered SIM for ata5
(noperiph:ata5:0:-1:-1): xpt_setup_ccb
(noperiph:ata5:0:-1:-1): xpt_action
(xpt0:ata5:0:-1:-1): xpt_compile_path
(xpt0:ata5:0:-1:-1): Rescanning ATAPI bus.
(xpt0:ata5:0:-1:-1): xpt_setup_ccb
(xpt0:ata5:0:-1:-1): xpt_action
(xpt0:ata5:0:-1:-1): xpt_scan_bus
(xpt0:ata5:0:-1:-1): xpt_setup_ccb
(xpt0:ata5:0:-1:-1): xpt_action
(xpt0:ata5:0:-1:-1): xpt_done
(noperiph:ata5:0:0:0): xpt_compile_path
(noperiph:ata5:0:0:0): xpt_setup_ccb
(noperiph:ata5:0:0:0): xpt_action
(noperiph:ata5:0:0:0): xpt_done
(noperiph:ata5:0:0:0): xpt_setup_ccb
(noperiph:ata5:0:0:0): xpt_action
(noperiph:ata5:0:0:0): xpt_setup_ccb
(noperiph:ata5:0:0:0): xpt_action
(noperiph:ata5:0:0:0): xpt_done
(noperiph:ata5:0:0:0): xpt_setup_ccb
(noperiph:ata5:0:0:0): xpt_action
(noperiph:ata5:0:0:0): GET_TRAN_SETTINGS
(noperiph:ata5:0:0:0): xpt_done
(noperiph:ata5:0:0:0): SET_TRAN_SETTINGS not supported
(noperiph:ata5:0:0:0): xpt_done
(noperiph:ata5:0:0:0): xpt_release_path
(xpt0:ata5:0:0:0): xpt_compile_path
(xpt0:ata5:0:0:0): xpt_setup_ccb
(xpt0:ata5:0:0:0): xpt_action
(xpt0:ata5:0:0:0): xpt_scan_lun
(xpt0:ata5:0:0:0): xpt_setup_ccb
(xpt0:ata5:0:0:0): xpt_action
(xpt0:ata5:0:0:0): xpt_done
(xpt0:ata5:0:0:0): xpt_done
(noperiph:ata5:0:1:0): xpt_compile_path
(noperiph:ata5:0:1:0): xpt_setup_ccb
(noperiph:ata5:0:1:0): xpt_action
(noperiph:ata5:0:1:0): xpt_done
(noperiph:ata5:0:1:0): xpt_setup_ccb
(noperiph:ata5:0:1:0): xpt_action
(noperiph:ata5:0:1:0): xpt_setup_ccb
(noperiph:ata5:0:1:0): xpt_action
(noperiph:ata5:0:1:0): xpt_done
(noperiph:ata5:0:1:0): xpt_setup_ccb
(noperiph:ata5:0:1:0): xpt_action
(noperiph:ata5:0:1:0): GET_TRAN_SETTINGS
(noperiph:ata5:0:1:0): xpt_done
(noperiph:ata5:0:1:0): SET_TRAN_SETTINGS not supported
(noperiph:ata5:0:1:0): xpt_done
(noperiph:ata5:0:1:0): xpt_release_path
(xpt0:ata5:0:1:0): xpt_compile_path
(xpt0:ata5:0:1:0): xpt_setup_ccb
(xpt0:ata5:0:1:0): xpt_action
(xpt0:ata5:0:1:0): xpt_scan_lun
(xpt0:ata5:0:1:0): xpt_setup_ccb
(xpt0:ata5:0:1:0): xpt_action
(xpt0:ata5:0:1:0): xpt_done
(xpt0:ata5:0:1:0): xpt_done
(noperiph:ata6:0:-1:-1): xpt_compile_path
(noperiph:ata6:0:-1:-1): xpt_setup_ccb
(noperiph:ata6:0:-1:-1): xpt_action
(noperiph:ata6:0:-1:-1): xpt_done
(noperiph:ata6:0:-1:-1): xpt_async
(noperiph:ata6:0:-1:-1): xpt_release_path
(noperiph:ata6:0:-1:-1): xpt_compile_path
(noperiph:ata6:0:-1:-1): Registered SIM for ata6
(noperiph:ata6:0:-1:-1): xpt_setup_ccb
(noperiph:ata6:0:-1:-1): xpt_action
(xpt0:ata6:0:-1:-1): xpt_compile_path
(xpt0:ata6:0:-1:-1): Rescanning ATAPI bus.
(xpt0:ata6:0:-1:-1): xpt_setup_ccb
(xpt0:ata6:0:-1:-1): xpt_action
(xpt0:ata6:0:-1:-1): xpt_scan_bus
(xpt0:ata6:0:-1:-1): xpt_setup_ccb
(xpt0:ata6:0:-1:-1): xpt_action
(xpt0:ata6:0:-1:-1): xpt_done
(noperiph:ata6:0:0:0): xpt_compile_path
(noperiph:ata6:0:0:0): xpt_setup_ccb
(noperiph:ata6:0:0:0): xpt_action
(noperiph:ata6:0:0:0): xpt_done
(noperiph:ata6:0:0:0): xpt_setup_ccb
(noperiph:ata6:0:0:0): xpt_action
(noperiph:ata6:0:0:0): xpt_setup_ccb
(noperiph:ata6:0:0:0): xpt_action
(noperiph:ata6:0:0:0): xpt_done
(noperiph:ata6:0:0:0): xpt_setup_ccb
(noperiph:ata6:0:0:0): xpt_action
(noperiph:ata6:0:0:0): GET_TRAN_SETTINGS
(noperiph:ata6:0:0:0): xpt_done
(noperiph:ata6:0:0:0): SET_TRAN_SETTINGS not supported
(noperiph:ata6:0:0:0): xpt_done
(noperiph:ata6:0:0:0): xpt_release_path
(xpt0:ata6:0:0:0): xpt_compile_path
(xpt0:ata6:0:0:0): xpt_setup_ccb
(xpt0:ata6:0:0:0): xpt_action
(xpt0:ata6:0:0:0): xpt_scan_lun
(xpt0:ata6:0:0:0): xpt_setup_ccb
(xpt0:ata6:0:0:0): xpt_action
(xpt0:ata6:0:0:0): xpt_done
(xpt0:ata6:0:0:0): xpt_done
(noperiph:ata6:0:1:0): xpt_compile_path
(noperiph:ata6:0:1:0): xpt_setup_ccb
(noperiph:ata6:0:1:0): xpt_action
(noperiph:ata6:0:1:0): xpt_done
(noperiph:ata6:0:1:0): xpt_setup_ccb
(noperiph:ata6:0:1:0): xpt_action
(noperiph:ata6:0:1:0): xpt_setup_ccb
(noperiph:ata6:0:1:0): xpt_action
(noperiph:ata6:0:1:0): xpt_done
(noperiph:ata6:0:1:0): xpt_setup_ccb
(noperiph:ata6:0:1:0): xpt_action
(noperiph:ata6:0:1:0): GET_TRAN_SETTINGS
(noperiph:ata6:0:1:0): xpt_done
(noperiph:ata6:0:1:0): SET_TRAN_SETTINGS not supported
(noperiph:ata6:0:1:0): xpt_done
(noperiph:ata6:0:1:0): xpt_release_path
(xpt0:ata6:0:1:0): xpt_compile_path
(xpt0:ata6:0:1:0): xpt_setup_ccb
(xpt0:ata6:0:1:0): xpt_action
(xpt0:ata6:0:1:0): xpt_scan_lun
(xpt0:ata6:0:1:0): xpt_setup_ccb
(xpt0:ata6:0:1:0): xpt_action
(xpt0:ata6:0:1:0): xpt_done
(xpt0:ata6:0:1:0): xpt_done
(noperiph:ata7:0:-1:-1): xpt_compile_path
(noperiph:ata7:0:-1:-1): xpt_setup_ccb
(noperiph:ata7:0:-1:-1): xpt_action
(noperiph:ata7:0:-1:-1): xpt_done
(noperiph:ata7:0:-1:-1): xpt_async
(noperiph:ata7:0:-1:-1): xpt_release_path
(noperiph:ata7:0:-1:-1): xpt_compile_path
(noperiph:ata7:0:-1:-1): Registered SIM for ata7
(noperiph:ata7:0:-1:-1): xpt_setup_ccb
(noperiph:ata7:0:-1:-1): xpt_action
(xpt0:ata7:0:-1:-1): xpt_compile_path
(xpt0:ata7:0:-1:-1): Rescanning ATAPI bus.
(xpt0:ata7:0:-1:-1): xpt_setup_ccb
(xpt0:ata7:0:-1:-1): xpt_action
(xpt0:ata7:0:-1:-1): xpt_scan_bus
(xpt0:ata7:0:-1:-1): xpt_setup_ccb
(xpt0:ata7:0:-1:-1): xpt_action
(xpt0:ata7:0:-1:-1): xpt_done
(noperiph:ata7:0:0:0): xpt_compile_path
(noperiph:ata7:0:0:0): xpt_setup_ccb
(noperiph:ata7:0:0:0): xpt_action
(noperiph:ata7:0:0:0): xpt_done
(noperiph:ata7:0:0:0): xpt_setup_ccb
(noperiph:ata7:0:0:0): xpt_action
(noperiph:ata7:0:0:0): xpt_setup_ccb
(noperiph:ata7:0:0:0): xpt_action
(noperiph:ata7:0:0:0): xpt_done
(noperiph:ata7:0:0:0): xpt_setup_ccb
(noperiph:ata7:0:0:0): xpt_action
(noperiph:ata7:0:0:0): GET_TRAN_SETTINGS
(noperiph:ata7:0:0:0): xpt_done
(noperiph:ata7:0:0:0): SET_TRAN_SETTINGS not supported
(noperiph:ata7:0:0:0): xpt_done
(noperiph:ata7:0:0:0): xpt_release_path
(xpt0:ata7:0:0:0): xpt_compile_path
(xpt0:ata7:0:0:0): xpt_setup_ccb
(xpt0:ata7:0:0:0): xpt_action
(xpt0:ata7:0:0:0): xpt_scan_lun
(xpt0:ata7:0:0:0): xpt_setup_ccb
(xpt0:ata7:0:0:0): xpt_action
(xpt0:ata7:0:0:0): xpt_done
(xpt0:ata7:0:0:0): xpt_done
(noperiph:ata7:0:1:0): xpt_compile_path
(noperiph:ata7:0:1:0): xpt_setup_ccb
(noperiph:ata7:0:1:0): xpt_action
(noperiph:ata7:0:1:0): xpt_done
(noperiph:ata7:0:1:0): xpt_setup_ccb
(noperiph:ata7:0:1:0): xpt_action
(noperiph:ata7:0:1:0): xpt_setup_ccb
(noperiph:ata7:0:1:0): xpt_action
(noperiph:ata7:0:1:0): xpt_done
(noperiph:ata7:0:1:0): xpt_setup_ccb
(noperiph:ata7:0:1:0): xpt_action
(noperiph:ata7:0:1:0): GET_TRAN_SETTINGS
(noperiph:ata7:0:1:0): xpt_done
(noperiph:ata7:0:1:0): SET_TRAN_SETTINGS not supported
(noperiph:ata7:0:1:0): xpt_done
(noperiph:ata7:0:1:0): xpt_release_path
(xpt0:ata7:0:1:0): xpt_compile_path
(xpt0:ata7:0:1:0): xpt_setup_ccb
(xpt0:ata7:0:1:0): xpt_action
(xpt0:ata7:0:1:0): xpt_scan_lun
(xpt0:ata7:0:1:0): xpt_setup_ccb
(xpt0:ata7:0:1:0): xpt_action
(xpt0:ata7:0:1:0): xpt_done
(xpt0:ata7:0:1:0): xpt_done
(noperiph:ata8:0:-1:-1): xpt_compile_path
(noperiph:ata8:0:-1:-1): xpt_setup_ccb
(noperiph:ata8:0:-1:-1): xpt_action
(noperiph:ata8:0:-1:-1): xpt_done
(noperiph:ata8:0:-1:-1): xpt_async
(noperiph:ata8:0:-1:-1): xpt_release_path
(noperiph:ata8:0:-1:-1): xpt_compile_path
(noperiph:ata8:0:-1:-1): Registered SIM for ata8
(noperiph:ata8:0:-1:-1): xpt_setup_ccb
(noperiph:ata8:0:-1:-1): xpt_action
(xpt0:ata8:0:-1:-1): xpt_compile_path
(xpt0:ata8:0:-1:-1): Rescanning ATAPI bus.
(xpt0:ata8:0:-1:-1): xpt_setup_ccb
(xpt0:ata8:0:-1:-1): xpt_action
(xpt0:ata8:0:-1:-1): xpt_scan_bus
(xpt0:ata8:0:-1:-1): xpt_setup_ccb
(xpt0:ata8:0:-1:-1): xpt_action
(xpt0:ata8:0:-1:-1): xpt_done
(noperiph:ata8:0:0:0): xpt_compile_path
(noperiph:ata8:0:0:0): xpt_setup_ccb
(noperiph:ata8:0:0:0): xpt_action
(noperiph:ata8:0:0:0): xpt_done
(noperiph:ata8:0:0:0): xpt_setup_ccb
(noperiph:ata8:0:0:0): xpt_action
(noperiph:ata8:0:0:0): xpt_setup_ccb
(noperiph:ata8:0:0:0): xpt_action
(noperiph:ata8:0:0:0): xpt_done
(noperiph:ata8:0:0:0): xpt_setup_ccb
(noperiph:ata8:0:0:0): xpt_action
(noperiph:ata8:0:0:0): GET_TRAN_SETTINGS
(noperiph:ata8:0:0:0): xpt_done
(noperiph:ata8:0:0:0): SET_TRAN_SETTINGS not supported
(noperiph:ata8:0:0:0): xpt_done
(noperiph:ata8:0:0:0): xpt_release_path
(xpt0:ata8:0:0:0): xpt_compile_path
(xpt0:ata8:0:0:0): xpt_setup_ccb
(xpt0:ata8:0:0:0): xpt_action
(xpt0:ata8:0:0:0): xpt_scan_lun
(xpt0:ata8:0:0:0): xpt_setup_ccb
(xpt0:ata8:0:0:0): xpt_action
(xpt0:ata8:0:0:0): xpt_done
(xpt0:ata8:0:0:0): xpt_done
(noperiph:ata8:0:1:0): xpt_compile_path
(noperiph:ata8:0:1:0): xpt_setup_ccb
(noperiph:ata8:0:1:0): xpt_action
(noperiph:ata8:0:1:0): xpt_done
(noperiph:ata8:0:1:0): xpt_setup_ccb
(noperiph:ata8:0:1:0): xpt_action
(noperiph:ata8:0:1:0): xpt_setup_ccb
(noperiph:ata8:0:1:0): xpt_action
(noperiph:ata8:0:1:0): xpt_done
(noperiph:ata8:0:1:0): xpt_setup_ccb
(noperiph:ata8:0:1:0): xpt_action
(noperiph:ata8:0:1:0): GET_TRAN_SETTINGS
(noperiph:ata8:0:1:0): xpt_done
(noperiph:ata8:0:1:0): SET_TRAN_SETTINGS not supported
(noperiph:ata8:0:1:0): xpt_done
(noperiph:ata8:0:1:0): xpt_release_path
(xpt0:ata8:0:1:0): xpt_compile_path
(xpt0:ata8:0:1:0): xpt_setup_ccb
(xpt0:ata8:0:1:0): xpt_action
(xpt0:ata8:0:1:0): xpt_scan_lun
(xpt0:ata8:0:1:0): xpt_setup_ccb
(xpt0:ata8:0:1:0): xpt_action
(xpt0:ata8:0:1:0): xpt_done
(xpt0:ata8:0:1:0): xpt_done
SMP: AP CPU #1 Launched!
(xpt0:ata4:0:0:0): camisr
(xpt0:ata4:0:0:0): xpt_scan_bus
(xpt0:ata4:0:0:0): xpt_setup_ccb
(xpt0:ata4:0:0:0): xpt_action
(xpt0:ata4:0:0:0): xpt_free_path
(xpt0:ata4:0:0:0): xpt_release_path
(xpt0:ata4:0:1:0): camisr
(xpt0:ata4:0:1:0): xpt_scan_bus
(xpt0:ata4:0:1:0): xpt_setup_ccb
(xpt0:ata4:0:1:0): xpt_action
(xpt0:ata4:0:1:0): xpt_free_path
(xpt0:ata4:0:1:0): xpt_release_path
(xpt0:ata4:0:-1:-1): xpt_done
(xpt0:ata5:0:0:0): camisr
(xpt0:ata5:0:0:0): xpt_scan_bus
(xpt0:ata5:0:0:0): xpt_setup_ccb
(xpt0:ata5:0:0:0): xpt_action
(xpt0:ata5:0:0:0): xpt_free_path
(xpt0:ata5:0:0:0): xpt_release_path
(xpt0:ata5:0:1:0): camisr
(xpt0:ata5:0:1:0): xpt_scan_bus
(xpt0:ata5:0:1:0): xpt_setup_ccb
(xpt0:ata5:0:1:0): xpt_action
(xpt0:ata5:0:1:0): xpt_free_path
(xpt0:ata5:0:1:0): xpt_release_path
(xpt0:ata5:0:-1:-1): xpt_done
(xpt0:ata6:0:0:0): camisr
(xpt0:ata6:0:0:0): xpt_scan_bus
(xpt0:ata6:0:0:0): xpt_setup_ccb
(xpt0:ata6:0:0:0): xpt_action
(xpt0:ata6:0:0:0): xpt_free_path
(xpt0:ata6:0:0:0): xpt_release_path
(xpt0:ata6:0:1:0): camisr
(xpt0:ata6:0:1:0): xpt_scan_bus
(xpt0:ata6:0:1:0): xpt_setup_ccb
(xpt0:ata6:0:1:0): xpt_action
(xpt0:ata6:0:1:0): xpt_free_path
(xpt0:ata6:0:1:0): xpt_release_path
(xpt0:ata6:0:-1:-1): xpt_done
(xpt0:ata7:0:0:0): camisr
(xpt0:ata7:0:0:0): xpt_scan_bus
(xpt0:ata7:0:0:0): xpt_setup_ccb
(xpt0:ata7:0:0:0): xpt_action
(xpt0:ata7:0:0:0): xpt_free_path
(xpt0:ata7:0:0:0): xpt_release_path
(xpt0:ata7:0:1:0): camisr
(xpt0:ata7:0:1:0): xpt_scan_bus
(xpt0:ata7:0:1:0): xpt_setup_ccb
(xpt0:ata7:0:1:0): xpt_action
(xpt0:ata7:0:1:0): xpt_free_path
(xpt0:ata7:0:1:0): xpt_release_path
(xpt0:ata7:0:-1:-1): xpt_done
(xpt0:ata8:0:0:0): camisr
(xpt0:ata8:0:0:0): xpt_scan_bus
(xpt0:ata8:0:0:0): xpt_setup_ccb
(xpt0:ata8:0:0:0): xpt_action
(xpt0:ata8:0:0:0): xpt_free_path
(xpt0:ata8:0:0:0): xpt_release_path
(xpt0:ata8:0:1:0): camisr
(xpt0:ata8:0:1:0): xpt_scan_bus
(xpt0:ata8:0:1:0): xpt_setup_ccb
(xpt0:ata8:0:1:0): xpt_action
(xpt0:ata8:0:1:0): xpt_free_path
(xpt0:ata8:0:1:0): xpt_release_path
(xpt0:ata8:0:-1:-1): xpt_done
(xpt0:ata4:0:-1:-1): camisr
(xpt0:ata4:0:-1:-1): Rescan succeeded
(xpt0:ata4:0:-1:-1): xpt_free_path
(xpt0:ata4:0:-1:-1): xpt_release_path
(xpt0:ata5:0:-1:-1): camisr
(xpt0:ata5:0:-1:-1): Rescan succeeded
(xpt0:ata5:0:-1:-1): xpt_free_path
(xpt0:ata5:0:-1:-1): xpt_release_path
(xpt0:ata6:0:-1:-1): camisr
(xpt0:ata6:0:-1:-1): Rescan succeeded
(xpt0:ata6:0:-1:-1): xpt_free_path
(xpt0:ata6:0:-1:-1): xpt_release_path
(xpt0:ata7:0:-1:-1): camisr
(xpt0:ata7:0:-1:-1): Rescan succeeded
(xpt0:ata7:0:-1:-1): xpt_free_path
(xpt0:ata7:0:-1:-1): xpt_release_path
(xpt0:ata8:0:-1:-1): camisr
(xpt0:ata8:0:-1:-1): Rescan succeeded
(xpt0:ata8:0:-1:-1): xpt_free_path
(xpt0:ata8:0:-1:-1): xpt_release_path
Trying to mount root from ufs:/dev/ad10s1a
cam_debug: xpt_schedule_dev
cam_debug: Inserting onto queue
cam_debug: xpt_run_dev_sendq
cam_debug: running device 0xc53b6c00
(probe0:ata2:0:1:0): XPT_SCSI_IO
atapi_action: hcb at 0xc554e680: 12 0 0 0 24 0
acd0: req=0xc55889c0 INQUIRY queued
acd0: req=0xc55889c0 INQUIRY starting
acd0: req=0xc55889c0 INQUIRY begin transaction
acd0: req=0xc55889c0 INQUIRY interrupt
acd0: req=0xc55889c0 INQUIRY end transaction
acd0: req=0xc55889c0 INQUIRY finish taskqueue_swi
acd0: req=0xc55889c0 INQUIRY completed entered
acd0: req=0xc55889c0 INQUIRY completed callback/wakeup
atapi_cb: hcb at 0xc554e680 sense = 00: sk = 0)
acd0: cmd INQUIRY status 50 result 00 error 00
(probe0:ata2:0:1:0): xpt_done
(probe0:ata2:0:1:0): camisr
(probe0:ata2:0:1:0): probedone
cam_debug: xpt_release_ccb
(probe0:ata2:0:1:0): xpt_schedule
(probe0:ata2:0:1:0): added periph to queue
cam_debug: xpt_schedule_dev
cam_debug: Inserting onto queue
(probe0:ata2:0:1:0): calling xpt_run_devq
cam_debug: xpt_run_dev_allocq
cam_debug: qfrozen_cnt == 0x0, entries == 1, openings == 16, active == 0
cam_debug: running device 0xc53b6c00
(probe0:ata2:0:1:0): xpt_setup_ccb
cam_debug: calling periph start
(probe0:ata2:0:1:0): probestart
(probe0:ata2:0:1:0): xpt_action
(probe0:ata2:0:1:0): INQUIRY. CDB: 12 0 0 0 60 0
cam_debug: xpt_schedule_dev
cam_debug: Inserting onto queue
cam_debug: xpt_run_dev_sendq
cam_debug: running device 0xc53b6c00
(probe0:ata2:0:1:0): XPT_SCSI_IO
atapi_action: hcb at 0xc554e580: 12 0 0 0 60 0
acd0: req=0xc55883c0 INQUIRY queued
acd0: req=0xc55883c0 INQUIRY starting
acd0: req=0xc55883c0 INQUIRY begin transaction
acd0: req=0xc55883c0 INQUIRY interrupt
acd0: req=0xc55883c0 INQUIRY end transaction
acd0: req=0xc55883c0 INQUIRY finish taskqueue_swi
acd0: req=0xc55883c0 INQUIRY completed entered
acd0: req=0xc55883c0 INQUIRY completed callback/wakeup
atapi_cb: hcb at 0xc554e580 sense = 00: sk = 0)
acd0: cmd INQUIRY status 50 result 00 error 00
(probe0:ata2:0:1:0): xpt_done
(probe0:ata2:0:1:0): camisr
(probe0:ata2:0:1:0): probedone
(probe0:ata2:0:1:0): xpt_setup_ccb
(probe0:ata2:0:1:0): xpt_action
(probe0:ata2:0:1:0): xpt_done
(probe0:ata2:0:1:0): xpt_setup_ccb
(probe0:ata2:0:1:0): xpt_action
(probe0:ata2:0:1:0): xpt_setup_ccb
(probe0:ata2:0:1:0): xpt_action
(probe0:ata2:0:1:0): xpt_done
(probe0:ata2:0:1:0): xpt_setup_ccb
(probe0:ata2:0:1:0): xpt_action
(probe0:ata2:0:1:0): GET_TRAN_SETTINGS
(probe0:ata2:0:1:0): xpt_done
(probe0:ata2:0:1:0): SET_TRAN_SETTINGS not supported
(probe0:ata2:0:1:0): xpt_done
cam_debug: xpt_release_ccb
(probe0:ata2:0:1:0): xpt_schedule
(probe0:ata2:0:1:0): added periph to queue
cam_debug: xpt_schedule_dev
cam_debug: Inserting onto queue
(probe0:ata2:0:1:0): calling xpt_run_devq
cam_debug: xpt_run_dev_allocq
cam_debug: qfrozen_cnt == 0x0, entries == 1, openings == 16, active == 0
cam_debug: running device 0xc53b6c00
(probe0:ata2:0:1:0): xpt_setup_ccb
cam_debug: calling periph start
(probe0:ata2:0:1:0): probestart
(probe0:ata2:0:1:0): xpt_action
(probe0:ata2:0:1:0): INQUIRY. CDB: 12 1 80 0 ff 0
cam_debug: xpt_schedule_dev
cam_debug: Inserting onto queue
cam_debug: xpt_run_dev_sendq
cam_debug: running device 0xc53b6c00
(probe0:ata2:0:1:0): XPT_SCSI_IO
atapi_action: hcb at 0xc554e4c0: 12 1 80 0 ff 0
acd0: req=0xc5556180 INQUIRY queued
acd0: req=0xc5556180 INQUIRY starting
acd0: req=0xc5556180 INQUIRY begin transaction
(xpt0:xpt0:0:-1:-1): xpt_action
acd0: req=0xc5556180 INQUIRY timeout
acd0: req=0xc5556180 INQUIRY finish taskqueue_swi
acd0: req=0xc5556180 INQUIRY completed entered
(noperiph:ata2:0:-1:-1): xpt_async
(noperiph:ata2:0:1:0): xpt_compile_path
(noperiph:ata2:0:1:0): xpt_release_path
acd0: FAILURE - INQUIRY timed out
acd0: req=0xc5556180 INQUIRY completed callback/wakeup
atapi_cb: hcb at 0xc554e4c0 sense = 00: sk = 0)
acd0: cmd INQUIRY status 00 result 05 error 00
(probe0:ata2:0:1:0): xpt_done
(probe0:ata2:0:1:0): camisr
(probe0:ata2:0:1:0): probedone
(probe0:ata2:0:1:0): xpt_action
(probe0:ata2:0:1:0): INQUIRY. CDB: 12 1 80 0 ff 0
cam_debug: xpt_schedule_dev
cam_debug: Inserting onto queue
cam_debug: xpt_run_dev_sendq
cam_debug: running device 0xc53b6c00
(probe0:ata2:0:1:0): XPT_SCSI_IO
atapi_action: hcb at 0xc555d500: 12 1 80 0 ff 0
acd0: req=0xc55889c0 INQUIRY queued
acd0: req=0xc55889c0 INQUIRY starting
acd0: req=0xc55889c0 INQUIRY begin transaction
(xpt0:xpt0:0:-1:-1): xpt_action
acd0: req=0xc55889c0 INQUIRY timeout
acd0: req=0xc55889c0 INQUIRY finish taskqueue_swi
acd0: req=0xc55889c0 INQUIRY completed entered
(noperiph:ata2:0:-1:-1): xpt_async
(noperiph:ata2:0:1:0): xpt_compile_path
(noperiph:ata2:0:1:0): xpt_release_path
acd0: FAILURE - INQUIRY timed out
acd0: req=0xc55889c0 INQUIRY completed callback/wakeup
atapi_cb: hcb at 0xc555d500 sense = 00: sk = 0)
acd0: cmd INQUIRY status 00 result 05 error 00
(probe0:ata2:0:1:0): xpt_done
(probe0:ata2:0:1:0): camisr
(probe0:ata2:0:1:0): probedone
(probe0:ata2:0:1:0): xpt_action
(probe0:ata2:0:1:0): INQUIRY. CDB: 12 1 80 0 ff 0
cam_debug: xpt_schedule_dev
cam_debug: Inserting onto queue
cam_debug: xpt_run_dev_sendq
cam_debug: running device 0xc53b6c00
(probe0:ata2:0:1:0): XPT_SCSI_IO
atapi_action: hcb at 0xc555d540: 12 1 80 0 ff 0
acd0: req=0xc5588840 INQUIRY queued
acd0: req=0xc5588840 INQUIRY starting
acd0: req=0xc5588840 INQUIRY begin transaction
acd0: req=0xc5588840 INQUIRY timeout
acd0: req=0xc5588840 INQUIRY finish taskqueue_swi
acd0: req=0xc5588840 INQUIRY completed entered
(noperiph:ata2:0:-1:-1): xpt_async
(noperiph:ata2:0:1:0): xpt_compile_path
(noperiph:ata2:0:1:0): xpt_release_path
acd0: FAILURE - INQUIRY timed out
acd0: req=0xc5588840 INQUIRY completed callback/wakeup
atapi_cb: hcb at 0xc555d540 sense = 00: sk = 0)
acd0: cmd INQUIRY status 00 result 05 error 00
(probe0:ata2:0:1:0): xpt_done
(probe0:ata2:0:1:0): camisr
(probe0:ata2:0:1:0): probedone
(probe0:ata2:0:1:0): xpt_action
(probe0:ata2:0:1:0): INQUIRY. CDB: 12 1 80 0 ff 0
cam_debug: xpt_schedule_dev
cam_debug: Inserting onto queue
cam_debug: xpt_run_dev_sendq
cam_debug: running device 0xc53b6c00
(probe0:ata2:0:1:0): XPT_SCSI_IO
atapi_action: hcb at 0xc5595a00: 12 1 80 0 ff 0
acd0: req=0xc5555780 INQUIRY queued
acd0: req=0xc5555780 INQUIRY starting
acd0: req=0xc5555780 INQUIRY begin transaction
acd0: req=0xc5555780 INQUIRY timeout
acd0: req=0xc5555780 INQUIRY finish taskqueue_swi
acd0: req=0xc5555780 INQUIRY completed entered
(noperiph:ata2:0:-1:-1): xpt_async
(noperiph:ata2:0:1:0): xpt_compile_path
(noperiph:ata2:0:1:0): xpt_release_path
acd0: FAILURE - INQUIRY timed out
acd0: req=0xc5555780 INQUIRY completed callback/wakeup
atapi_cb: hcb at 0xc5595a00 sense = 00: sk = 0)
acd0: cmd INQUIRY status 00 result 05 error 00
(probe0:ata2:0:1:0): xpt_done
(probe0:ata2:0:1:0): camisr
(probe0:ata2:0:1:0): probedone
(probe0:ata2:0:1:0): xpt_action
(probe0:ata2:0:1:0): INQUIRY. CDB: 12 1 80 0 ff 0
cam_debug: xpt_schedule_dev
cam_debug: Inserting onto queue
cam_debug: xpt_run_dev_sendq
cam_debug: running device 0xc53b6c00
(probe0:ata2:0:1:0): XPT_SCSI_IO
atapi_action: hcb at 0xc554e100: 12 1 80 0 ff 0
acd0: req=0xc5588300 INQUIRY queued
acd0: req=0xc5588300 INQUIRY starting
acd0: req=0xc5588300 INQUIRY begin transaction
acd0: req=0xc5588300 INQUIRY timeout
acd0: req=0xc5588300 INQUIRY finish taskqueue_swi
acd0: req=0xc5588300 INQUIRY completed entered
(noperiph:ata2:0:-1:-1): xpt_async
(noperiph:ata2:0:1:0): xpt_compile_path
(noperiph:ata2:0:1:0): xpt_release_path
acd0: FAILURE - INQUIRY timed out
acd0: req=0xc5588300 INQUIRY completed callback/wakeup
atapi_cb: hcb at 0xc554e100 sense = 00: sk = 0)
acd0: cmd INQUIRY status 00 result 05 error 00
(probe0:ata2:0:1:0): xpt_done
(probe0:ata2:0:1:0): camisr
(probe0:ata2:0:1:0): probedone
(probe0:ata2:0:1:0): xpt_setup_ccb
(probe0:ata2:0:1:0): xpt_action
(probe0:ata2:0:1:0): GET_TRAN_SETTINGS
(probe0:ata2:0:1:0): xpt_done
(probe0:ata2:0:1:0): xpt_action
(probe0:ata2:0:1:0): xpt_setup_ccb
(probe0:ata2:0:1:0): xpt_action
(probe0:ata2:0:1:0): xpt_done
(probe0:ata2:0:1:0): xpt_setup_ccb
(probe0:ata2:0:1:0): xpt_action
(probe0:ata2:0:1:0): GET_TRAN_SETTINGS
(probe0:ata2:0:1:0): xpt_done
(probe0:ata2:0:1:0): SET_TRAN_SETTINGS not supported
(probe0:ata2:0:1:0): xpt_done
cam_debug: xpt_release_ccb
(probe0:ata2:0:1:0): xpt_schedule
(probe0:ata2:0:1:0): added periph to queue
cam_debug: xpt_schedule_dev
cam_debug: Inserting onto queue
(probe0:ata2:0:1:0): calling xpt_run_devq
cam_debug: xpt_run_dev_allocq
cam_debug: qfrozen_cnt == 0x0, entries == 1, openings == 16, active == 0
cam_debug: running device 0xc53b6c00
(probe0:ata2:0:1:0): xpt_setup_ccb
cam_debug: calling periph start
(probe0:ata2:0:1:0): probestart
(probe0:ata2:0:1:0): xpt_action
(probe0:ata2:0:1:0): TEST UNIT READY. CDB: 0 0 0 0 0 0
cam_debug: xpt_schedule_dev
cam_debug: Inserting onto queue
cam_debug: xpt_run_dev_sendq
cam_debug: running device 0xc53b6c00
(probe0:ata2:0:1:0): XPT_SCSI_IO
atapi_action: hcb at 0xc555d800: 0 0 0 0 0 0
acd0: req=0xc5588240 TEST_UNIT_READY queued
acd0: req=0xc5588240 TEST_UNIT_READY starting
acd0: req=0xc5588240 TEST_UNIT_READY begin transaction
acd0: req=0xc5588240 TEST_UNIT_READY interrupt
acd0: req=0xc5588240 TEST_UNIT_READY end transaction
acd0: req=0xc5588240 TEST_UNIT_READY finish taskqueue_swi
acd0: req=0xc5588240 TEST_UNIT_READY completed entered
acd0: req=0xc5588240 TEST_UNIT_READY autoissue request sense
acd0: req=0xc5588240 REQUEST_SENSE queued
acd0: req=0xc5588240 REQUEST_SENSE starting
acd0: req=0xc5588240 REQUEST_SENSE begin transaction
acd0: req=0xc5588240 REQUEST_SENSE interrupt
acd0: req=0xc5588240 REQUEST_SENSE end transaction
acd0: req=0xc5588240 TEST_UNIT_READY interrupt
acd0: req=0xc5588240 TEST_UNIT_READY end transaction
acd0: req=0xc5588240 TEST_UNIT_READY finish taskqueue_swi
acd0: req=0xc5588240 TEST_UNIT_READY completed entered
acd0: req=0xc5588240 TEST_UNIT_READY completed callback/wakeup
atapi_cb: hcb at 0xc555d800 sense = 06: sk = 6)
acd0: cmd TEST_UNIT_READY status 50 result 05 error 00
(probe0:ata2:0:1:0): xpt_done
(probe0:ata2:0:1:0): camisr
(probe0:ata2:0:1:0): probedone
(probe0:ata2:0:1:0): xpt_action
(probe0:ata2:0:1:0): xpt_async
(pass0:ata2:0:1:0): xpt_compile_path
(pass0:ata2:0:1:0): xpt_setup_ccb
(pass0:ata2:0:1:0): xpt_action
(cd0:ata2:0:1:0): xpt_compile_path
(cd0:ata2:0:1:0): xpt_setup_ccb
(cd0:ata2:0:1:0): xpt_action
(cd0:ata2:0:1:0): xpt_done
(cd0:ata2:0:1:0): xpt_setup_ccb
(cd0:ata2:0:1:0): xpt_action
(cd0:ata2:0:1:0): xpt_schedule
(cd0:ata2:0:1:0): added periph to queue
cam_debug: xpt_release_ccb
cam_debug: xpt_schedule_dev
cam_debug: Inserting onto queue
cam_debug: xpt_run_dev_allocq
cam_debug: qfrozen_cnt == 0x0, entries == 1, openings == 16, active == 0
cam_debug: running device 0xc53b6c00
(cd0:ata2:0:1:0): xpt_setup_ccb
cam_debug: calling periph start
(cd0:ata2:0:1:0): entering cdstart
(cd0:ata2:0:1:0): xpt_action
(cd0:ata2:0:1:0): READ CD RECORDED CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
cam_debug: xpt_schedule_dev
cam_debug: Inserting onto queue
cam_debug: xpt_run_dev_sendq
cam_debug: running device 0xc53b6c00
(cd0:ata2:0:1:0): XPT_SCSI_IO
atapi_action: hcb at 0xc5595cc0: 25 0 0 0 0 0 0 0 0 0
acd0: req=0xc55556c0 READ_CAPACITY queued
acd0: req=0xc55556c0 READ_CAPACITY starting
acd0: req=0xc55556c0 READ_CAPACITY begin transaction
(xpt0:ata2:0:1:0): xpt_done
(probe0:ata2:0:1:0): xpt_free_path
(probe0:ata2:0:1:0): xpt_release_path
(xpt0:ata2:0:1:0): camisr
(xpt0:ata2:0:1:0): xpt_scan_bus
(xpt0:ata2:0:1:0): xpt_setup_ccb
(xpt0:ata2:0:1:0): xpt_action
(xpt0:ata2:0:1:0): xpt_free_path
(xpt0:ata2:0:1:0): xpt_release_path
(xpt0:ata2:0:-1:-1): xpt_done
(xpt0:ata2:0:-1:-1): camisr
(xpt0:ata2:0:-1:-1): Rescan succeeded
(xpt0:ata2:0:-1:-1): xpt_free_path
(xpt0:ata2:0:-1:-1): xpt_release_path
acd0: req=0xc55556c0 READ_CAPACITY timeout
acd0: req=0xc55556c0 READ_CAPACITY finish taskqueue_swi
acd0: req=0xc55556c0 READ_CAPACITY completed entered
(noperiph:ata2:0:-1:-1): xpt_async
(noperiph:ata2:0:1:0): xpt_compile_path
(noperiph:ata2:0:1:0): xpt_release_path
(cd0:ata2:0:1:0): xpt_setup_ccb
(cd0:ata2:0:1:0): xpt_action
(cd0:ata2:0:1:0): xpt_setup_ccb
(cd0:ata2:0:1:0): xpt_action
(cd0:ata2:0:1:0): xpt_setup_ccb
(cd0:ata2:0:1:0): xpt_action
acd0: FAILURE - READ_CAPACITY timed out
acd0: req=0xc55556c0 READ_CAPACITY completed callback/wakeup
atapi_cb: hcb at 0xc5595cc0 sense = 00: sk = 0)
acd0: cmd READ_CAPACITY status 00 result 05 error 00
(cd0:ata2:0:1:0): xpt_done
(cd0:ata2:0:1:0): camisr
(cd0:ata2:0:1:0): entering cddone
(cd0:ata2:0:1:0): xpt_action
(cd0:ata2:0:1:0): READ CD RECORDED CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
cam_debug: xpt_schedule_dev
cam_debug: Inserting onto queue
cam_debug: xpt_run_dev_sendq
cam_debug: running device 0xc53b6c00
(cd0:ata2:0:1:0): XPT_SCSI_IO
atapi_action: hcb at 0xc555d800: 25 0 0 0 0 0 0 0 0 0
acd0: req=0xc5556240 READ_CAPACITY queued
acd0: req=0xc5556240 READ_CAPACITY starting
acd0: req=0xc5556240 READ_CAPACITY begin transaction
acd0: req=0xc5556240 READ_CAPACITY timeout
acd0: req=0xc5556240 READ_CAPACITY finish taskqueue_swi
acd0: req=0xc5556240 READ_CAPACITY completed entered
(noperiph:ata2:0:-1:-1): xpt_async
(noperiph:ata2:0:1:0): xpt_compile_path
(noperiph:ata2:0:1:0): xpt_release_path
(cd0:ata2:0:1:0): xpt_setup_ccb
(cd0:ata2:0:1:0): xpt_action
(cd0:ata2:0:1:0): xpt_setup_ccb
(cd0:ata2:0:1:0): xpt_action
(cd0:ata2:0:1:0): xpt_setup_ccb
(cd0:ata2:0:1:0): xpt_action
acd0: FAILURE - READ_CAPACITY timed out
acd0: req=0xc5556240 READ_CAPACITY completed callback/wakeup
atapi_cb: hcb at 0xc555d800 sense = 00: sk = 0)
acd0: cmd READ_CAPACITY status 00 result 05 error 00
(cd0:ata2:0:1:0): xpt_done
(cd0:ata2:0:1:0): camisr
(cd0:ata2:0:1:0): entering cddone
(cd0:ata2:0:1:0): xpt_setup_ccb
(cd0:ata2:0:1:0): xpt_action
(cd0:ata2:0:1:0): xpt_setup_ccb
(cd0:ata2:0:1:0): xpt_action
(cd0:ata2:0:1:0): got CAM status 0xb
(cd0:ata2:0:1:0): fatal error, failed to attach to device
(cd0:ata2:0:1:0): xpt_setup_ccb
(cd0:ata2:0:1:0): xpt_action
(cd0:ata2:0:1:0): lost device
cam_debug: xpt_release_ccb
(cd0:ata2:0:1:0): entering cdprevent
(cd0:ata2:0:1:0): entering cdgetccb
(cd0:ata2:0:1:0): xpt_schedule
(cd0:ata2:0:1:0): added periph to queue
cam_debug: xpt_schedule_dev
cam_debug: Inserting onto queue
(cd0:ata2:0:1:0): calling xpt_run_devq
cam_debug: xpt_run_dev_allocq
cam_debug: qfrozen_cnt == 0x0, entries == 1, openings == 16, active == 0
cam_debug: running device 0xc53b6c00
(cd0:ata2:0:1:0): xpt_setup_ccb
cam_debug: calling periph start
(cd0:ata2:0:1:0): entering cdstart
(cd0:ata2:0:1:0): xpt_action
(cd0:ata2:0:1:0): PREVENT ALLOW MEDIUM REMOVAL. CDB: 1e 0 0 0 1 0
cam_debug: xpt_schedule_dev
cam_debug: Inserting onto queue
cam_debug: xpt_run_dev_sendq
cam_debug: running device 0xc53b6c00
(cd0:ata2:0:1:0): XPT_SCSI_IO
atapi_action: hcb at 0xc554ed00: 1e 0 0 0 1 0
acd0: req=0xc5588900 PREVENT_ALLOW queued
acd0: req=0xc5588900 PREVENT_ALLOW starting
acd0: req=0xc5588900 PREVENT_ALLOW begin transaction
acd0: req=0xc5588900 PREVENT_ALLOW interrupt
acd0: req=0xc5588900 PREVENT_ALLOW end transaction
acd0: req=0xc5588900 PREVENT_ALLOW finish taskqueue_swi
acd0: req=0xc5588900 PREVENT_ALLOW completed entered
acd0: req=0xc5588900 PREVENT_ALLOW autoissue request sense
acd0: req=0xc5588900 REQUEST_SENSE queued
acd0: req=0xc5588900 REQUEST_SENSE starting
acd0: req=0xc5588900 REQUEST_SENSE begin transaction
acd0: req=0xc5588900 REQUEST_SENSE interrupt
acd0: req=0xc5588900 REQUEST_SENSE end transaction
acd0: req=0xc5588900 PREVENT_ALLOW interrupt
acd0: req=0xc5588900 PREVENT_ALLOW end transaction
acd0: req=0xc5588900 PREVENT_ALLOW finish taskqueue_swi
acd0: req=0xc5588900 PREVENT_ALLOW completed entered
acd0: req=0xc5588900 PREVENT_ALLOW completed callback/wakeup
atapi_cb: hcb at 0xc554ed00 sense = 06: sk = 6)
acd0: cmd PREVENT_ALLOW status 50 result 05 error 00
(cd0:ata2:0:1:0): xpt_done
(cd0:ata2:0:1:0): camisr
(cd0:ata2:0:1:0): entering cddone
(cd0:ata2:0:1:0): trying to wakeup ccbwait
(cd0:ata2:0:1:0): xpt_setup_ccb
(cd0:ata2:0:1:0): xpt_action
(cd0:ata2:0:1:0): xpt_action
(cd0:ata2:0:1:0): PREVENT ALLOW MEDIUM REMOVAL. CDB: 1e 0 0 0 1 0
cam_debug: xpt_schedule_dev
cam_debug: Inserting onto queue
cam_debug: xpt_run_dev_sendq
cam_debug: running device 0xc53b6c00
(cd0:ata2:0:1:0): XPT_SCSI_IO
atapi_action: hcb at 0xc5595900: 1e 0 0 0 1 0
acd0: req=0xc5588240 PREVENT_ALLOW queued
acd0: req=0xc5588240 PREVENT_ALLOW starting
acd0: req=0xc5588240 PREVENT_ALLOW begin transaction
acd0: req=0xc5588240 PREVENT_ALLOW interrupt
acd0: req=0xc5588240 PREVENT_ALLOW end transaction
acd0: req=0xc5588240 PREVENT_ALLOW finish taskqueue_swi
acd0: req=0xc5588240 PREVENT_ALLOW completed entered
acd0: req=0xc5588240 PREVENT_ALLOW completed callback/wakeup
atapi_cb: hcb at 0xc5595900 sense = 00: sk = 0)
acd0: cmd PREVENT_ALLOW status 50 result 00 error 00
(cd0:ata2:0:1:0): xpt_done
(cd0:ata2:0:1:0): camisr
(cd0:ata2:0:1:0): entering cddone
(cd0:ata2:0:1:0): trying to wakeup ccbwait
cam_debug: xpt_release_ccb
(cd0:ata2:0:1:0): entering cdsize
(cd0:ata2:0:1:0): entering cdgetccb
(cd0:ata2:0:1:0): xpt_schedule
(cd0:ata2:0:1:0): added periph to queue
cam_debug: xpt_schedule_dev
cam_debug: Inserting onto queue
(cd0:ata2:0:1:0): calling xpt_run_devq
cam_debug: xpt_run_dev_allocq
cam_debug: qfrozen_cnt == 0x0, entries == 1, openings == 16, active == 0
cam_debug: running device 0xc53b6c00
(cd0:ata2:0:1:0): xpt_setup_ccb
cam_debug: calling periph start
(cd0:ata2:0:1:0): entering cdstart
(cd0:ata2:0:1:0): xpt_action
(cd0:ata2:0:1:0): READ CD RECORDED CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
cam_debug: xpt_schedule_dev
cam_debug: Inserting onto queue
cam_debug: xpt_run_dev_sendq
cam_debug: running device 0xc53b6c00
(cd0:ata2:0:1:0): XPT_SCSI_IO
atapi_action: hcb at 0xc555c3c0: 25 0 0 0 0 0 0 0 0 0
acd0: req=0xc5588240 READ_CAPACITY queued
acd0: req=0xc5588240 READ_CAPACITY starting
acd0: req=0xc5588240 READ_CAPACITY begin transaction
acd0: req=0xc5588240 READ_CAPACITY timeout
acd0: req=0xc5588240 READ_CAPACITY finish taskqueue_swi
acd0: req=0xc5588240 READ_CAPACITY completed entered
(noperiph:ata2:0:-1:-1): xpt_async
(noperiph:ata2:0:1:0): xpt_compile_path
(noperiph:ata2:0:1:0): xpt_release_path
acd0: FAILURE - READ_CAPACITY timed out
acd0: req=0xc5588240 READ_CAPACITY completed callback/wakeup
atapi_cb: hcb at 0xc555c3c0 sense = 00: sk = 0)
acd0: cmd READ_CAPACITY status 00 result 05 error 00
(cd0:ata2:0:1:0): xpt_done
(cd0:ata2:0:1:0): camisr
(cd0:ata2:0:1:0): entering cddone
(cd0:ata2:0:1:0): trying to wakeup ccbwait
(cd0:ata2:0:1:0): xpt_action
(cd0:ata2:0:1:0): READ CD RECORDED CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
cam_debug: xpt_schedule_dev
cam_debug: Inserting onto queue
cam_debug: xpt_run_dev_sendq
cam_debug: running device 0xc53b6c00
(cd0:ata2:0:1:0): XPT_SCSI_IO
atapi_action: hcb at 0xc554e700: 25 0 0 0 0 0 0 0 0 0
acd0: req=0xc5588780 READ_CAPACITY queued
acd0: req=0xc5588780 READ_CAPACITY starting
acd0: req=0xc5588780 READ_CAPACITY begin transaction
acd0: req=0xc5588780 READ_CAPACITY timeout
acd0: req=0xc5588780 READ_CAPACITY finish taskqueue_swi
acd0: req=0xc5588780 READ_CAPACITY completed entered
(noperiph:ata2:0:-1:-1): xpt_async
(noperiph:ata2:0:1:0): xpt_compile_path
(noperiph:ata2:0:1:0): xpt_release_path
acd0: FAILURE - READ_CAPACITY timed out
acd0: req=0xc5588780 READ_CAPACITY completed callback/wakeup
atapi_cb: hcb at 0xc554e700 sense = 00: sk = 0)
acd0: cmd READ_CAPACITY status 00 result 05 error 00
(cd0:ata2:0:1:0): xpt_done
(cd0:ata2:0:1:0): camisr
(cd0:ata2:0:1:0): entering cddone
(cd0:ata2:0:1:0): trying to wakeup ccbwait
cam_debug: xpt_release_ccb
(cd0:ata2:0:1:0): entering cdprevent
(cd0:ata2:0:1:0): entering cdgetccb
(cd0:ata2:0:1:0): xpt_schedule
(cd0:ata2:0:1:0): added periph to queue
cam_debug: xpt_schedule_dev
cam_debug: Inserting onto queue
(cd0:ata2:0:1:0): calling xpt_run_devq
cam_debug: xpt_run_dev_allocq
cam_debug: qfrozen_cnt == 0x0, entries == 1, openings == 16, active == 0
cam_debug: running device 0xc53b6c00
(cd0:ata2:0:1:0): xpt_setup_ccb
cam_debug: calling periph start
(cd0:ata2:0:1:0): entering cdstart
(cd0:ata2:0:1:0): xpt_action
(cd0:ata2:0:1:0): PREVENT ALLOW MEDIUM REMOVAL. CDB: 1e 0 0 0 0 0
cam_debug: xpt_schedule_dev
cam_debug: Inserting onto queue
cam_debug: xpt_run_dev_sendq
cam_debug: running device 0xc53b6c00
(cd0:ata2:0:1:0): XPT_SCSI_IO
atapi_action: hcb at 0xc5595840: 1e 0 0 0 0 0
acd0: req=0xc5588900 PREVENT_ALLOW queued
acd0: req=0xc5588900 PREVENT_ALLOW starting
acd0: req=0xc5588900 PREVENT_ALLOW begin transaction
acd0: req=0xc5588900 PREVENT_ALLOW interrupt
acd0: req=0xc5588900 PREVENT_ALLOW end transaction
acd0: req=0xc5588900 PREVENT_ALLOW finish taskqueue_swi
acd0: req=0xc5588900 PREVENT_ALLOW completed entered
acd0: req=0xc5588900 PREVENT_ALLOW autoissue request sense
acd0: req=0xc5588900 REQUEST_SENSE queued
acd0: req=0xc5588900 REQUEST_SENSE starting
acd0: req=0xc5588900 REQUEST_SENSE begin transaction
acd0: req=0xc5588900 REQUEST_SENSE interrupt
acd0: req=0xc5588900 REQUEST_SENSE end transaction
acd0: req=0xc5588900 PREVENT_ALLOW interrupt
acd0: req=0xc5588900 PREVENT_ALLOW end transaction
acd0: req=0xc5588900 PREVENT_ALLOW finish taskqueue_swi
acd0: req=0xc5588900 PREVENT_ALLOW completed entered
acd0: req=0xc5588900 PREVENT_ALLOW completed callback/wakeup
atapi_cb: hcb at 0xc5595840 sense = 06: sk = 6)
acd0: cmd PREVENT_ALLOW status 50 result 05 error 00
(cd0:ata2:0:1:0): xpt_done
(cd0:ata2:0:1:0): camisr
(cd0:ata2:0:1:0): entering cddone
(cd0:ata2:0:1:0): trying to wakeup ccbwait
(cd0:ata2:0:1:0): xpt_setup_ccb
(cd0:ata2:0:1:0): xpt_action
(cd0:ata2:0:1:0): xpt_action
(cd0:ata2:0:1:0): PREVENT ALLOW MEDIUM REMOVAL. CDB: 1e 0 0 0 0 0
cam_debug: xpt_schedule_dev
cam_debug: Inserting onto queue
cam_debug: xpt_run_dev_sendq
cam_debug: running device 0xc53b6c00
(cd0:ata2:0:1:0): XPT_SCSI_IO
atapi_action: hcb at 0xc554e580: 1e 0 0 0 0 0
acd0: req=0xc55883c0 PREVENT_ALLOW queued
acd0: req=0xc55883c0 PREVENT_ALLOW starting
acd0: req=0xc55883c0 PREVENT_ALLOW begin transaction
acd0: req=0xc55883c0 PREVENT_ALLOW interrupt
acd0: req=0xc55883c0 PREVENT_ALLOW end transaction
acd0: req=0xc55883c0 PREVENT_ALLOW finish taskqueue_swi
acd0: req=0xc55883c0 PREVENT_ALLOW completed entered
acd0: req=0xc55883c0 PREVENT_ALLOW completed callback/wakeup
atapi_cb: hcb at 0xc554e580 sense = 00: sk = 0)
acd0: cmd PREVENT_ALLOW status 50 result 00 error 00
(cd0:ata2:0:1:0): xpt_done
(cd0:ata2:0:1:0): camisr
(cd0:ata2:0:1:0): entering cddone
(cd0:ata2:0:1:0): trying to wakeup ccbwait
cam_debug: xpt_release_ccb
(cd0:ata2:0:1:0): leaving cdopen
(cd0:ata2:0:1:0): entering cdprevent
(cd0:ata2:0:1:0): removing device entry
(cd0:ata2:0:1:0): xpt_free_path
(cd0:ata2:0:1:0): xpt_release_path
More information about the freebsd-scsi
mailing list