qlogic isp 6312 device not showing up

[Eric Anderson]

jason kawaja wrote:
> ibm xseries 346, dual xeon dual core with qlogic fc card.
>
> external disk device shows up within the qlogic bios (once wwid is 
> correctly added to the disk array manager,ibm shark) however does not 
> show from within freebsd. any ideas? information below.  thank you.
>

> isp0: <Qlogic ISP 6312 PCI FC-AL Adapter> port 0x4000-0x40ff mem 
> 0xdefff000-0xdeffffff irq 96 at device 4.0 on pci4
> isp0: [GIANT-LOCKED]
> isp0: bad hard address 125- resetting to zero 

I'm guessing the "bad hard address 125" is the problem.  Sounds like you 
manually set a hard address in the BIOS - is that necessary for your 
configuration?


Eric



-- 
------------------------------------------------------------------------
Eric Anderson        Sr. Systems Administrator        Centaur Technology
Anything that works is better than anything that doesn't.
------------------------------------------------------------------------