SCB timeout and other errors + system hang with adaptec/seagate
Rob Watt
rob at hudson-trading.com
Wed Mar 8 14:35:05 UTC 2006
---------- Forwarded message ----------
Date: Tue, 7 Mar 2006 10:06:53 -0500 (EST)
From: Rob Watt <rob at hudson-trading.com>
To: Justin T. Gibbs <gibbs at scsiguy.com>
Cc: Rob Watt <rob at hudson-trading.com>
Subject: Re: SCB timeout and other errors + system hang with adaptec/seagate
On Mon, 6 Mar 2006, Justin T. Gibbs wrote:
> Can you send me a dmesg from a boot -v? Perhaps we're not
> getting the termination settings correct on the SCSI controller.
> The verbose dmesg should tell.
attached is the verbose dmesg.
thanks
-
Rob Watt
-------------- next part --------------
Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 6.0-RELEASE-p4 #1: Tue Feb 28 15:30:36 EST 2006
root at crebain7:/usr/obj/usr/src/sys/LOCAL
Preloaded elf kernel "/boot/kernel/kernel" at 0xffffffff80753000.
Calibrating clock(s) ... i8254 clock: 1193165 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 2390341370 Hz
CPU: Dual Core AMD Opteron(tm) Processor 280 (2390.34-MHz K8-class CPU)
Origin = "AuthenticAMD" Id = 0x20f12 Stepping = 2
Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
Features2=0x1<SSE3>
AMD Features=0xe2500800<SYSCALL,NX,MMX+,<b25>,LM,3DNow+,3DNow>
Hyperthreading: 2 logical CPUs
L1 2MB data TLB: 8 entries, fully associative
L1 2MB instruction TLB: 8 entries, fully associative
L1 4KB data TLB: 32 entries, fully associative
L1 4KB instruction TLB: 32 entries, fully associative
L1 data cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
L1 instruction cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
L2 2MB unified TLB: 0 entries, disabled/not present
L2 4KB data TLB: 512 entries, 4-way associative
L2 4KB instruction TLB: 512 entries, 4-way associative
L2 unified cache: 1024 kbytes, 64 bytes/line, 1 lines/tag, 16-way associative
real memory = 4227792896 (4031 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009bfff, 634880 bytes (155 pages)
0x0000000000850000 - 0x00000000f498ffff, 4094951424 bytes (999744 pages)
avail memory = 4084760576 (3895 MB)
ACPI APIC Table: <A M I OEMAPIC >
APIC ID: physical 0, logical 0:0
APIC ID: physical 1, logical 0:1
APIC ID: physical 2, logical 0:2
APIC ID: physical 3, logical 0:3
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
cpu2 (AP): APIC ID: 2
cpu3 (AP): APIC ID: 3
APIC: CPU 0 has ACPI ID 1
APIC: CPU 1 has ACPI ID 2
APIC: CPU 2 has ACPI ID 3
APIC: CPU 3 has ACPI ID 4
MADT: Found IO APIC ID 4, Interrupt 0 at 0xfec00000
ioapic0: Routing external 8259A's -> intpin 0
ioapic0: intpin 0 -> ExtINT (edge, high)
ioapic0: intpin 1 -> ISA IRQ 1 (edge, high)
ioapic0: intpin 2 -> ISA IRQ 2 (edge, high)
ioapic0: intpin 3 -> ISA IRQ 3 (edge, high)
ioapic0: intpin 4 -> ISA IRQ 4 (edge, high)
ioapic0: intpin 5 -> ISA IRQ 5 (edge, high)
ioapic0: intpin 6 -> ISA IRQ 6 (edge, high)
ioapic0: intpin 7 -> ISA IRQ 7 (edge, high)
ioapic0: intpin 8 -> ISA IRQ 8 (edge, high)
ioapic0: intpin 9 -> ISA IRQ 9 (edge, high)
ioapic0: intpin 10 -> ISA IRQ 10 (edge, high)
ioapic0: intpin 11 -> ISA IRQ 11 (edge, high)
ioapic0: intpin 12 -> ISA IRQ 12 (edge, high)
ioapic0: intpin 13 -> ISA IRQ 13 (edge, high)
ioapic0: intpin 14 -> ISA IRQ 14 (edge, high)
ioapic0: intpin 15 -> ISA IRQ 15 (edge, high)
ioapic0: intpin 16 -> PCI IRQ 16 (level, low)
ioapic0: intpin 17 -> PCI IRQ 17 (level, low)
ioapic0: intpin 18 -> PCI IRQ 18 (level, low)
ioapic0: intpin 19 -> PCI IRQ 19 (level, low)
ioapic0: intpin 20 -> PCI IRQ 20 (level, low)
ioapic0: intpin 21 -> PCI IRQ 21 (level, low)
ioapic0: intpin 22 -> PCI IRQ 22 (level, low)
ioapic0: intpin 23 -> PCI IRQ 23 (level, low)
MADT: Found IO APIC ID 5, Interrupt 24 at 0xfebff000
ioapic1: intpin 0 -> PCI IRQ 24 (level, low)
ioapic1: intpin 1 -> PCI IRQ 25 (level, low)
ioapic1: intpin 2 -> PCI IRQ 26 (level, low)
ioapic1: intpin 3 -> PCI IRQ 27 (level, low)
MADT: Found IO APIC ID 6, Interrupt 28 at 0xfebfe000
ioapic2: intpin 0 -> PCI IRQ 28 (level, low)
ioapic2: intpin 1 -> PCI IRQ 29 (level, low)
ioapic2: intpin 2 -> PCI IRQ 30 (level, low)
ioapic2: intpin 3 -> PCI IRQ 31 (level, low)
MADT: Interrupt override: source 0, irq 2
ioapic0: Routing IRQ 0 -> intpin 2
ioapic0: intpin 2 trigger: edge
ioapic0: intpin 2 polarity: high
MADT: Interrupt override: source 0, irq 2
ioapic0: Routing IRQ 0 -> intpin 2
ioapic0: intpin 2 trigger: edge
ioapic0: intpin 2 polarity: high
MADT: Forcing active-low polarity and level trigger for SCI
ioapic0: intpin 9 polarity: low
ioapic0: intpin 9 trigger: level
ioapic0 <Version 1.1> irqs 0-23 on motherboard
ioapic1 <Version 1.1> irqs 24-27 on motherboard
ioapic2 <Version 1.1> irqs 28-31 on motherboard
cpu0 BSP:
ID: 0x00000000 VER: 0x00040010 LDR: 0x01000000 DFR: 0x0fffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000100ef therm: 0x00000000 err: 0x0001000f pcm: 0x00010000
random: <entropy source, Software, Yarrow>
nfslock: pseudo-device
mem: <memory>
io: <I/O>
null: <null device, zero device>
acpi0: <A M I OEMXSDT> on motherboard
acpi0: [MPSAFE]
pci_open(1): mode 1 addr port (0x0cf8) is 0x80025000
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 1 2 3 4 5 6 [class=060400] [hdr=01] is there (id=74601022)
AcpiOsDerivePciId: bus 0 dev 7 func 0
AcpiOsDerivePciId: bus 0 dev 7 func 1
AcpiOsDerivePciId: bus 0 dev 7 func 3
acpi0: Power Button (fixed)
AcpiOsDerivePciId: bus 0 dev 10 func 0
AcpiOsDerivePciId: bus 0 dev 11 func 0
pci_link0: <ACPI PCI Link LNKA> irq 5 on acpi0
pci_link0: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 5 N 0 3 4 5 6 7 9 10 11 12 14 15
pci_link0: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 5 N 0 3 4 5 6 7 9 10 11 12 14 15
pci_link0: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 9 10 11 12 14 15
pci_link1: <ACPI PCI Link LNKB> irq 10 on acpi0
pci_link1: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 10 N 0 3 4 5 6 7 9 10 11 12 14 15
pci_link1: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 10 N 0 3 4 5 6 7 9 10 11 12 14 15
pci_link1: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 9 10 11 12 14 15
pci_link2: <ACPI PCI Link LNKC> irq 11 on acpi0
pci_link2: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 11 N 0 3 4 5 6 7 9 10 11 12 14 15
pci_link2: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 11 N 0 3 4 5 6 7 9 10 11 12 14 15
pci_link2: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 9 10 11 12 14 15
pci_link3: <ACPI PCI Link LNKD> irq 9 on acpi0
pci_link3: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 9 N 0 3 4 5 6 7 9 10 11 12 14 15
pci_link3: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 9 N 0 3 4 5 6 7 9 10 11 12 14 15
pci_link3: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 9 10 11 12 14 15
ACPI timer: 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 -> 10
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_throttle0: <ACPI CPU Throttling> on cpu0
acpi_throttle0: P_CNT from P_BLK 0x1010
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: physical bus=0
found-> vendor=0x1022, dev=0x7460, revid=0x07
bus=0, slot=6, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0117, statreg=0x0230, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x0a (2500 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x7468, revid=0x05
bus=0, slot=7, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x000f, statreg=0x0220, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x7469, revid=0x03
bus=0, slot=7, func=1
class=01-01-8a, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0200, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[20]: type 4, range 32, base 0000ffa0, size 4, enabled
found-> vendor=0x1022, dev=0x746a, revid=0x02
bus=0, slot=7, func=2
class=0c-05-00, hdrtype=0x00, mfdev=0
cmdreg=0x0001, statreg=0x0200, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=d, irq=9
map[10]: type 4, range 32, base 0000cc00, size 5, enabled
pcib0: matched entry for 0.7.INTD
pcib0: slot 7 INTD hardwired to IRQ 19
found-> vendor=0x1022, dev=0x746b, revid=0x05
bus=0, slot=7, func=3
class=06-80-00, hdrtype=0x00, mfdev=0
cmdreg=0x0000, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x7450, revid=0x12
bus=0, slot=10, func=0
class=06-04-00, hdrtype=0x01, mfdev=1
cmdreg=0x0117, statreg=0x0230, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x05 (1250 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x7451, revid=0x01
bus=0, slot=10, func=1
class=08-00-10, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0200, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[10]: type 1, range 64, base febff000, size 12, enabled
found-> vendor=0x1022, dev=0x7450, revid=0x12
bus=0, slot=11, func=0
class=06-04-00, hdrtype=0x01, mfdev=1
cmdreg=0x0117, statreg=0x0230, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x05 (1250 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x7451, revid=0x01
bus=0, slot=11, func=1
class=08-00-10, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0200, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[10]: type 1, range 64, base febfe000, size 12, enabled
found-> vendor=0x1022, dev=0x1100, revid=0x00
bus=0, slot=24, func=0
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x1101, revid=0x00
bus=0, slot=24, func=1
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x1102, revid=0x00
bus=0, slot=24, func=2
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x1103, revid=0x00
bus=0, slot=24, func=3
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x1100, revid=0x00
bus=0, slot=25, func=0
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x1101, revid=0x00
bus=0, slot=25, func=1
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x1102, revid=0x00
bus=0, slot=25, func=2
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x1103, revid=0x00
bus=0, slot=25, func=3
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
pcib1: <ACPI PCI-PCI bridge> at device 6.0 on pci0
pcib1: secondary bus 3
pcib1: subordinate bus 3
pcib1: I/O decode 0x9000-0xbfff
pcib1: memory decode 0xfca00000-0xfeafffff
pcib1: prefetched decode 0xfff00000-0xfffff
pci3: <ACPI PCI bus> on pcib1
pci3: physical bus=3
found-> vendor=0x1022, dev=0x7464, revid=0x0b
bus=3, slot=0, func=0
class=0c-03-10, hdrtype=0x00, mfdev=1
cmdreg=0x0117, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x50 (20000 ns)
intpin=d, irq=9
map[10]: type 1, range 32, base feafc000, size 12, enabled
pcib1: (null) requested memory range 0xfeafc000-0xfeafcfff: good
pcib1: matched entry for 3.0.INTD
pcib1: slot 0 INTD hardwired to IRQ 19
found-> vendor=0x1022, dev=0x7464, revid=0x0b
bus=3, slot=0, func=1
class=0c-03-10, hdrtype=0x00, mfdev=0
cmdreg=0x0117, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x50 (20000 ns)
intpin=d, irq=9
map[10]: type 1, range 32, base feafd000, size 12, enabled
pcib1: (null) requested memory range 0xfeafd000-0xfeafdfff: good
pcib1: matched entry for 3.0.INTD
pcib1: slot 0 INTD hardwired to IRQ 19
found-> vendor=0x1002, dev=0x4752, revid=0x27
bus=3, slot=6, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0087, statreg=0x0290, cachelnsz=16 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base fd000000, size 24, enabled
pcib1: (null) requested memory range 0xfd000000-0xfdffffff: good
map[14]: type 4, range 32, base 0000b000, size 8, enabled
pcib1: (null) requested I/O range 0xb000-0xb0ff: in range
map[18]: type 1, range 32, base feaff000, size 12, enabled
pcib1: (null) requested memory range 0xfeaff000-0xfeafffff: good
pcib1: matched entry for 3.6.INTA
pcib1: slot 6 INTA hardwired to IRQ 18
ohci0: <OHCI (generic) USB controller> mem 0xfeafc000-0xfeafcfff irq 19 at device 0.0 on pci3
ohci0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xfeafc000
ohci0: [GIANT-LOCKED]
usb0: OHCI version 1.0, legacy support
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: AMD OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
ohci1: <OHCI (generic) USB controller> mem 0xfeafd000-0xfeafdfff irq 19 at device 0.1 on pci3
ohci1: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xfeafd000
ohci1: [GIANT-LOCKED]
usb1: OHCI version 1.0, legacy support
usb1: <OHCI (generic) USB controller> on ohci1
usb1: USB revision 1.0
uhub1: AMD OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 3 ports with 3 removable, self powered
pci3: <display, VGA> at device 6.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <AMD 8111 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 7.1 on pci0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xffa0
ata0: <ATA channel 0> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=03 ostat0=60 ostat1=70
ata0: stat0=0x20 err=0x20 lsb=0x20 msb=0x20
ata0: stat1=0x30 err=0x30 lsb=0x30 msb=0x30
ata0: reset tp2 stat0=20 stat1=30 devices=0x0
ata0: [MPSAFE]
ata1: <ATA channel 1> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=03 ostat0=50 ostat1=00
ata1: stat0=0x10 err=0x01 lsb=0x14 msb=0xeb
ata1: stat1=0x00 err=0x01 lsb=0x7f msb=0x7f
ata1: reset tp2 stat0=10 stat1=00 devices=0x4<ATAPI_MASTER>
ata1: [MPSAFE]
pci0: <serial bus, SMBus> at device 7.2 (no driver attached)
pci0: <bridge> at device 7.3 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> at device 10.0 on pci0
pcib2: secondary bus 2
pcib2: subordinate bus 2
pcib2: I/O decode 0x7000-0x8fff
pcib2: memory decode 0xfc700000-0xfc9fffff
pcib2: prefetched decode 0xff500000-0xff5fffff
pci2: <ACPI PCI bus> on pcib2
pci2: physical bus=2
found-> vendor=0x9005, dev=0x801f, revid=0x10
bus=2, slot=10, func=0
class=01-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0117, statreg=0x0430, cachelnsz=16 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x28 (10000 ns), maxlat=0x19 (6250 ns)
intpin=a, irq=5
powerspec 2 supports D0 D3 current D0
MSI supports 2 messages, 64 bit
map[10]: type 4, range 32, base 00008000, size 8, enabled
pcib2: (null) requested I/O range 0x8000-0x80ff: in range
map[14]: type 1, range 64, base fc89c000, size 13, enabled
pcib2: (null) requested memory range 0xfc89c000-0xfc89dfff: good
map[1c]: type 4, range 32, base 00007800, size 8, enabled
pcib2: (null) requested I/O range 0x7800-0x78ff: in range
pcib2: matched entry for 2.10.INTA
pcib2: slot 10 INTA hardwired to IRQ 24
found-> vendor=0x9005, dev=0x801f, revid=0x10
bus=2, slot=10, func=1
class=01-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0117, statreg=0x0430, cachelnsz=16 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x28 (10000 ns), maxlat=0x19 (6250 ns)
intpin=b, irq=10
powerspec 2 supports D0 D3 current D0
MSI supports 2 messages, 64 bit
map[10]: type 4, range 32, base 00008800, size 8, enabled
pcib2: (null) requested I/O range 0x8800-0x88ff: in range
map[14]: type 1, range 64, base fc89e000, size 13, enabled
pcib2: (null) requested memory range 0xfc89e000-0xfc89ffff: good
map[1c]: type 4, range 32, base 00008400, size 8, enabled
pcib2: (null) requested I/O range 0x8400-0x84ff: in range
pcib2: matched entry for 2.10.INTB
pcib2: slot 10 INTB hardwired to IRQ 25
ahd0: <Adaptec AIC7902 Ultra320 SCSI adapter> port 0x8000-0x80ff,0x7800-0x78ff mem 0xfc89c000-0xfc89dfff irq 24 at device 10.0 on pci2
ahd0: Defaulting to MEMIO on
ahd0: Reserved 0x100 bytes for rid 0x10 type 4 at 0x8000
ahd0: Reserved 0x100 bytes for rid 0x1c type 4 at 0x7800
ahd0: Enabling 39Bit Addressing
ahd0: Reading VPD from SEEPROM...ahd0: VPD parsing successful
ahd0: Reading SEEPROM...done.
ahd0: STPWLEVEL is on
ahd0: Manual Primary Termination
ahd0: Manual Secondary Termination
ahd0: Primary High byte termination Enabled
ahd0: Primary Low byte termination Enabled
ahd0: Secondary High byte termination Disabled
ahd0: Secondary Low byte termination Disabled
ahd0: Downloading Sequencer Program... 697 instructions downloaded
ahd0: Features 0x3c101, Bugs 0x740002, Flags 0x143f0
ahd0: [GIANT-LOCKED]
aic7902: Ultra320 Wide Channel A, SCSI Id=7, PCI-X 67-100Mhz, 512 SCBs
ahd1: <Adaptec AIC7902 Ultra320 SCSI adapter> port 0x8800-0x88ff,0x8400-0x84ff mem 0xfc89e000-0xfc89ffff irq 25 at device 10.1 on pci2
ahd1: Defaulting to MEMIO on
ahd1: Reserved 0x100 bytes for rid 0x10 type 4 at 0x8800
ahd1: Reserved 0x100 bytes for rid 0x1c type 4 at 0x8400
ahd1: Enabling 39Bit Addressing
ahd1: Reading VPD from SEEPROM...ahd1: VPD parsing successful
ahd1: Reading SEEPROM...done.
ahd1: STPWLEVEL is on
ahd1: Manual Primary Termination
ahd1: Manual Secondary Termination
ahd1: Primary High byte termination Enabled
ahd1: Primary Low byte termination Enabled
ahd1: Secondary High byte termination Disabled
ahd1: Secondary Low byte termination Disabled
ahd1: Downloading Sequencer Program... 697 instructions downloaded
ahd1: Features 0x3c101, Bugs 0x740002, Flags 0x143f1
ahd1: [GIANT-LOCKED]
aic7902: Ultra320 Wide Channel B, SCSI Id=7, PCI-X 67-100Mhz, 512 SCBs
pci0: <base peripheral, interrupt controller> at device 10.1 (no driver attached)
pcib3: <ACPI PCI-PCI bridge> at device 11.0 on pci0
pcib3: secondary bus 1
pcib3: subordinate bus 1
pcib3: I/O decode 0x6000-0x6fff
pcib3: memory decode 0xfc400000-0xfc6fffff
pcib3: prefetched decode 0xff400000-0xff4fffff
pci1: <ACPI PCI bus> on pcib3
pci1: physical bus=1
found-> vendor=0x8086, dev=0x1079, revid=0x03
bus=1, slot=3, func=0
class=02-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0117, statreg=0x0230, cachelnsz=16 (dwords)
lattimer=0x40 (1920 ns), mingnt=0xff (63750 ns), maxlat=0x00 (0 ns)
intpin=a, irq=5
powerspec 2 supports D0 D3 current D0
map[10]: type 1, range 64, base fc6c0000, size 17, enabled
pcib3: (null) requested memory range 0xfc6c0000-0xfc6dffff: good
map[18]: type 1, range 64, base fc600000, size 18, enabled
pcib3: (null) requested memory range 0xfc600000-0xfc63ffff: good
map[20]: type 4, range 32, base 00006880, size 6, enabled
pcib3: (null) requested I/O range 0x6880-0x68bf: in range
pcib3: matched entry for 1.3.INTA
pcib3: slot 3 INTA hardwired to IRQ 28
found-> vendor=0x8086, dev=0x1079, revid=0x03
bus=1, slot=3, func=1
class=02-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0117, statreg=0x0230, cachelnsz=16 (dwords)
lattimer=0x40 (1920 ns), mingnt=0xff (63750 ns), maxlat=0x00 (0 ns)
intpin=b, irq=10
powerspec 2 supports D0 D3 current D0
map[10]: type 1, range 64, base fc6e0000, size 17, enabled
pcib3: (null) requested memory range 0xfc6e0000-0xfc6fffff: good
map[18]: type 1, range 64, base fc680000, size 18, enabled
pcib3: (null) requested memory range 0xfc680000-0xfc6bffff: good
map[20]: type 4, range 32, base 00006c00, size 6, enabled
pcib3: (null) requested I/O range 0x6c00-0x6c3f: in range
pcib3: matched entry for 1.3.INTB
pcib3: slot 3 INTB hardwired to IRQ 29
em0: <Intel(R) PRO/1000 Network Connection, Version - 2.1.7> port 0x6880-0x68bf mem 0xfc6c0000-0xfc6dffff,0xfc600000-0xfc63ffff irq 28 at device 3.0 on pci1
em0: Reserved 0x20000 bytes for rid 0x10 type 3 at 0xfc6c0000
em0: Reserved 0x40 bytes for rid 0x20 type 4 at 0x6880
em0: [MPSAFE]
em0: bpf attached
em0: Ethernet address: 00:04:23:c5:aa:fe
em0: Speed:N/A Duplex:N/A
em1: <Intel(R) PRO/1000 Network Connection, Version - 2.1.7> port 0x6c00-0x6c3f mem 0xfc6e0000-0xfc6fffff,0xfc680000-0xfc6bffff irq 29 at device 3.1 on pci1
em1: Reserved 0x20000 bytes for rid 0x10 type 3 at 0xfc6e0000
em1: Reserved 0x40 bytes for rid 0x20 type 4 at 0x6c00
em1: [MPSAFE]
em1: bpf attached
em1: Ethernet address: 00:04:23:c5:aa:ff
em1: Speed:N/A Duplex:N/A
pci0: <base peripheral, interrupt controller> at device 11.1 (no driver attached)
acpi_button0: <Power Button> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0065
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
atkbd0: [GIANT-LOCKED]
psm0: unable to allocate IRQ
sio0: irq maps: 0x8001 0x8011 0x8001 0x8001
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
sio1: irq maps: 0x8001 0x8009 0x8001 0x8001
sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
fdc0: <floppy drive controller (FDE)> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: ic_type 90 part_id 80
fdc0: [MPSAFE]
fdc0: [FAST]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ppc0: using extended I/O port range
ppc0: SPP
ppc0: <Standard parallel printer port> port 0x378-0x37f irq 7 on acpi0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
ahc_isa_probe 0: ioport 0xc00 alloc failed
ahc_isa_probe 6: ioport 0x6c00 alloc failed
ahc_isa_probe 12: ioport 0xcc00 alloc failed
atkbdc: atkbdc0 already exists; skipping it
fdc: fdc0 already exists; skipping it
ppc: ppc0 already exists; skipping it
sio: sio0 already exists; skipping it
sio: sio1 already exists; skipping it
pnp_identify: Trying Read_Port at 203
pnp_identify: Trying Read_Port at 243
pnp_identify: Trying Read_Port at 283
pnp_identify: Trying Read_Port at 2c3
pnp_identify: Trying Read_Port at 303
pnp_identify: Trying Read_Port at 343
pnp_identify: Trying Read_Port at 383
pnp_identify: Trying Read_Port at 3c3
PNP Identify complete
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <ISA Option ROM> at iomem 0xc0000-0xc7fff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio2: not probed (disabled)
sio3: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
isa_probe_children: probing PnP devices
Device configuration finished.
Reducing kern.maxvnodes 233016 -> 100000
procfs registered
linprocfs registered
lapic: Divisor 2, Frequency 99599114 hz
Timecounter "TSC" frequency 2390341370 Hz quality -100
Timecounters tick every 1.000 msec
Linux ELF exec handler installed
lo0: bpf attached
Waiting 5 seconds for SCSI devices to settle
(noperiph:ahd0:0:-1:-1): SCSI bus reset delivered. 0 SCBs aborted.
(noperiph:ahd1:0:-1:-1): SCSI bus reset delivered. 0 SCBs aborted.
ata1-master: pio=PIO4 wdma=WDMA2 udma=UDMA33 cable=40 wire
acd0: setting PIO4 on AMD 8111 chip
acd0: setting UDMA33 on AMD 8111 chip
acd0: <QSI CD-ROM SCR-242/CXAC> CDROM drive at ata1 as master
acd0: read 4133KB/s (4133KB/s), 128KB buffer, UDMA33
acd0: Reads: CDR, CDRW, CDDA stream, packet
acd0: Writes:
acd0: Audio: play, 256 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: no/blank disc
ahd0: Selection Timeout on A:6. 0 SCBs aborted
ahd1: Selection Timeout on A:0. 0 SCBs aborted
ahd0: Selection Timeout on A:8. 0 SCBs aborted
ahd1: Selection Timeout on A:1. 0 SCBs aborted
ahd0: Selection Timeout on A:9. 0 SCBs aborted
ahd1: Selection Timeout on A:2. 0 SCBs aborted
ahd0: Selection Timeout on A:10. 0 SCBs aborted
ahd1: Selection Timeout on A:6. 0 SCBs aborted
ahd0: Selection Timeout on A:11. 0 SCBs aborted
ahd1: Selection Timeout on A:8. 0 SCBs aborted
ahd0: Selection Timeout on A:12. 0 SCBs aborted
ahd1: Selection Timeout on A:9. 0 SCBs aborted
ahd0: Selection Timeout on A:0. 0 SCBs aborted
ahd1: Selection Timeout on A:10. 0 SCBs aborted
ahd0: Selection Timeout on A:1. 0 SCBs aborted
ahd1: Selection Timeout on A:11. 0 SCBs aborted
ahd1: Selection Timeout on A:12. 0 SCBs aborted
ahd0: Selection Timeout on A:3. 0 SCBs aborted
ahd1: Selection Timeout on A:13. 0 SCBs aborted
ahd0: Selection Timeout on A:4. 0 SCBs aborted
ahd1: Selection Timeout on A:14. 0 SCBs aborted
ahd0: Selection Timeout on A:5. 0 SCBs aborted
ahd1: Selection Timeout on A:15. 0 SCBs aborted
ahd0: Selection Timeout on A:13. 0 SCBs aborted
ahd1: Selection Timeout on A:3. 0 SCBs aborted
ahd0: Selection Timeout on A:14. 0 SCBs aborted
ahd1: Selection Timeout on A:4. 0 SCBs aborted
ahd0: Selection Timeout on A:15. 0 SCBs aborted
(probe2:ahd0:0:2:0): Retrying Command
(ahd0:A:2:0): Sending PPR bus_width 1, period 8, offset fe, ppr_options ff
(ahd0:A:2:0): Received PPR width 1, period 8, offset 3f,options ff
Filtered to width 1, period 8, offset 3f, options ff
ahd0: target 2 using 16bit transfers
ahd0: target 2 synchronous with period = 0x8, offset = 0x3f(RDSTRM|DT|IU|RTI|QAS)
ahd1: Selection Timeout on A:5. 0 SCBs aborted
pass0 at ahd0 bus 0 target 2 lun 0
pass0: <SEAGATE ST3146707LC 0005> Fixed Direct Access SCSI-3 device
pass0: Serial Number 3KS01DTV000075016L4K
pass0: 320.000MB/s transfers (160.000MHz, offset 63, 16bit), Tagged Queueing Enabled
da0 at ahd0 bus 0 target 2 lun 0
da0: <SEAGATE ST3146707LC 0005> Fixed Direct Access SCSI-3 device
da0: Serial Number 3KS01DTV000075016L4K
da0: 320.000MB/s transfers (160.000MHz, offset 63, 16bit), Tagged Queueing Enabled
da0: 140014MB (286749488 512 byte sectors: 255H 63S/T 17849C)
GEOM: new disk da0
ATA PseudoRAID loaded
SMP: AP CPU #1 Launched!
cpu1 AP:
ID: 0x01000000 VER: 0x00040010 LDR: 0x02000000 DFR: 0x0fffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000200ef therm: 0x00000000 err: 0x00010000 pcm: 0x00010000
SMP: AP CPU #2 Launched!
cpu2 AP:
ID: 0x02000000 VER: 0x00040010 LDR: 0x04000000 DFR: 0x0fffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000200ef therm: 0x00000000 err: 0x00010000 pcm: 0x00010000
SMP: AP CPU #3 Launched!
cpu3 AP:
ID: 0x03000000 VER: 0x00040010 LDR: 0x08000000 DFR: 0x0fffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000200ef therm: 0x00000000 err: 0x00010000 pcm: 0x00010000
ioapic0: routing intpin 1 (ISA IRQ 1) to cluster 0
ioapic0: routing intpin 3 (ISA IRQ 3) to cluster 0
ioapic0: routing intpin 4 (ISA IRQ 4) to cluster 0
ioapic0: routing intpin 6 (ISA IRQ 6) to cluster 0
ioapic0: routing intpin 7 (ISA IRQ 7) to cluster 0
ioapic0: routing intpin 9 (ISA IRQ 9) to cluster 0
ioapic0: routing intpin 14 (ISA IRQ 14) to cluster 0
ioapic0: routing intpin 15 (ISA IRQ 15) to cluster 0
ioapic0: routing intpin 19 (PCI IRQ 19) to cluster 0
ioapic1: routing intpin 0 (PCI IRQ 24) to cluster 0
ioapic1: routing intpin 1 (PCI IRQ 25) to cluster 0
ioapic2: routing intpin 0 (PCI IRQ 28) to cluster 0
ioapic2: routing intpin 1 (PCI IRQ 29) to cluster 0
Trying to mount root from ufs:/dev/da0s1a
start_init: trying /sbin/init
em0: Link is up 1000 Mbps Full Duplex
More information about the freebsd-scsi
mailing list