iSCSI/scsi problem

[Danny Braniss]

> On Tue, Feb 07, 2006 at 15:51:30 +0200, Danny Braniss wrote:
> > hi,
> > I'm writing a iSCSI driver, and having problem with an
> >      HP StorageWorks IP Storage Router 2122-2
> > 
> > the CAM is sending a few Inquiry LUN commands
> > and the first Test Unit Ready is nacked with:
> > 	Logical Unit Not Ready, Initializing Cmd. Required
> > 
> > this could be a Target problem, like some misconfiguration, but
> > I was wondering if there is some CAM magic that I missed?
> 
> That generally means that the target needs to be spun up.
> 
> CAM will respond by sending a START UNIT command.

im going through the sniffed packets, and can't see a START UNIT
i do see Read Capacity, Reads, Sync. Cache, but no START :-(

danny